1320 modeli
This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with supports
Wydruk około 5,96 €–7,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Das Set besteht aus Adapter für ein 120mm PC Lüfter Verbindungen: Innenmaß: 100mm, Außenmaß: 105mm, Länge: 70mm, 40mm, 20mm Zwischenstücke: Innenmaß: 96mm, Außenmaß: 100mm, Länge: 50mm, 30mm Aktivkohle Adapter Außenmaß: 100mm, Länge: 55mm…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Back up or replace ignition keys for snowblowers by MTD, Ariens, Certified, Husqvarna, Powersmart, Toro and Yardworks and possible others in North America. This is a remix of the key by Foden. Unfortunately it does not work on my Toro and…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
The model prints best on its aft, since that was how it was designed to print. With the walls being so thin, extra perimeters are probably better than infill. There are two versions, one with a watermark and one without.
Wydruk około 2,28 €–2,78 € nettoWstępna wycena jednego wariantu
My throttle control lever handle broke off. After several years of just using the metal arm, I decided to draw up a replacement that could be 3d printed. If you need one of these, it is a quick and easy print. Might save you a few bucks…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper (preferably…
Wydruk około 6,19 €–7,56 € nettoWstępna wycena jednego wariantu
Simple bookmarks inspired by my favorite anime, Cowboy Bebop. The print is quite simple, with a combination of top and bottom layer in a transparent filament and a colorful filament in the middle. The top hole for any kind of attachments…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Hier habe ich für den MowBest 805 ein Satz Ersatzreifen erstellt. Die Reifen habe ich mit einem Prusa MK4s und einer MMU3 gedruckt die Felge mit PLAx CF von Nobufil und die Reifen mit TPU. Kann auch komplett aus PETG/PLA gedruckt werden.
Wydruk około 16,93 €–20,69 € nettoWstępna wycena jednego wariantu
Simple bookmarks inspired by my favorite anime, Cowboy Bebop. The print is quite simple, any color combination can be used. Writing and swordfish are stacked on top of the bottom print. The top hole for any kind of attachments or rope is…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
Simple bookmarks inspired by my favorite anime, Cowboy Bebop. The print is quite simple, quite thin and depending on the filament you use, it can be kind of transparent. The top hole for any kind of attachments or rope is around 2mm in…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
First try at fusion360 and all this. all the cowbells i found weren't rigid enough in my opinion so i made one for the wife and her knitting hobby. The model doesn't have the name on it, i just added it in prusa slicer, so you can make…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
all you need is a necklace chain
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Compact snowball maker with a hinge. Easy to print and easy to assemble. It has convenient grips to open the mold. Printing: I printed this with PLA, 0,2mm layerheight, 3 perimeters, 15% infil. For printing orientation please refer to 3mf…
i made this model for dummy 13, fits nicely on the head with no mods print with supports, 0.10 layer height
⚠ This replica was made for a video project and is not, in any way, meant to be prejudicial. I am not responsible for what you do with it. ⚠ Cette réplique a été faite pour un projet vidéo et n'est, en aucun cas, faites pour porter…
Made this quick little snowball grenade maker after the kids I were having lots of fun with the dodecahedron snowball maker. Wasn't able to find a grenade mold that fit my likings so I thought I'd whip one together. I printed this model…
This is a mold for snowballs to make them look like Lego heads. It took 2 ½ hours to print on my A1. While I can't say it's the easiest print ever, even if it turns out funky, it's still functional with some post-processing. Use the model…
Remix of https://www.thingiverse.com/thing:4887165 by TheBrotherBean and https://www.thingiverse.com/thing:410699 by EdisonM. Inspired by https://www.prusaprinters.org/prints/100362-fred-the-frog-but-hes-also-a-cowboy by AdamTKWallace.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D 3D Printable Snowboard Finger Toy Bring the slopes to your desk with this mini snowboard finger toy! Featuring a realistic design and curved…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
Wanted a thicc cowboy Fred the frog but with a baseplate so I remixed it. I printed it on a Bambu Lab P1P with 0.4mm nozzle, 0.12mm layer height and auto tree supports for the hat.
Jippy ka Yeee, go back to the wild wild west with this Cowboy Hat for your Mega-Lego-like Minifigure. Printed at 0.16 layerheigt with 3 perimeters, 7% infill, 4 bottom, 4 toplayers and support on the buildplate only. The hat is slightly…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
This hat is designed to look like Oklahoma State's Pistol Pete hat. The hat requires supports to get the correct shaping. Normally I prefer tree supports, but I would suggest on this one doing traditional supports. I originally attempted…
A simple wall mount for snowboards. Should fit most boards up to around 12 mm in thickness. Make sure to use a strong material and adjust your print settings for maximum strength. Don't use in a place where someone could get hurt if the…
Be prepared for the toughest snowball battle's this winter !!! 4 Sizes: 80mm 120mm 150mm 180mm
A simple frame made to hold 6 Pokemon cards that have been cut out to form a shadowbox. All you need to do it cut your cards for each layer of the box, insert them in order into the slots in the frame, and then glue the base into place. I…
A cowboy hat for your wild west / modern / super-hero / horror or other tabletop miniature games. If you like this free files please check out the full set for July 2023 here on our Patreon https://www.patreon.com/user?u=89784988…
THIS IS NOT MY DESIGN I found it on another website and decided to upload it here I also scaled it to be different sizes.
A snowball maker for 80mm (3.2 in) snowballs, battle-tested in the Alaskan outdoors. Prints in place without supports, and no screws required! I recommend reducing the layer height to 0.15mm to accommodate the overhangs. However, it…
Say "Howdy" to the cutest cowboy in town with the "Cat Wearing a Cowboy Hat Keychain." This charming keychain features an adorable cat sporting a classic cowboy hat, ready to bring a touch of Western flair to your daily adventures.…
I desing several models: If you just make 1 board print the normal one for matching ankles with dummy 1.0 o dummy Beta, this need suports in the front and back. If you need to print several boards or want better finishing, print the…
Strong snowball maker for big snowballs. Print with a strong weather resistant filament (ABS, PETG, ASA, Nylon, PC). You can scale it if you don't want big (3.88 in.) snowballs. Use some support material to get best shape and finish. Just…
Yeehaw! Dress up your Dummy-13 with the first entry in the Western-13 lineup, and follow for future accessories that will perfectly compliment this hat. Easily print this model with included clean and easy to remove supports or download…
A rubber duck snowball maker.
The Finger Snowboard! Use a heat gun or hot water and bend the tips the way you like after printing! I couldn’t find one I liked anywhere so I cut the boots off of the finger skis I found on Cults3d. Prints without supports. Please post…
good rubber duck
Update : Added a “true scale” version to video game scale and all the other machines here, instead of the official board game's (which is much, much larger). If you aren't trying to match the SFG board game pieces I would recommend…
Źródło oznaczyło ten model jako treść 18+.
DUMMY 13 V 1.0 COWBOY HAT ACCESSORY A simple Cowboy hat for the excellent Dummy 13 Figguirine created by Soozafone. Will fit the original scaled model. ORIGINAL DUMMY 13 MODEL HERE…
The Cowboy Hat Tray is a fun and functional home accessory that brings a true Wild West vibe into your space. This playful tray is meant to capture the iconic shape of a classic cowboy hat while delivering practical storage for your keys,…
Dallas Cowboys 1st Layer White 2nd Blue
Instructions My son and a friend asked me to make some Finger-snowboards. Kids love them and it's my fav 3DP giveaway these days! I usually print them in PLA and then put the tip's in boiling water to bend them up a little. Stickers are…
Ah well who wants to make a duck if you can make a dodecahedron? (probably nerds like us) Update I broke mine after pushing really hard on it. So please don't push to hard! Also I have the idea PLA doesn't like the cold, so maybe print…
This is a crowbar designed for Six Inch Scale Action Figures such as Marvel Legends, WWE Wrestling and DC Multiverse among other six to seven inch scale lines. This sculpt was used in the Super Action Stuff Bag of Violence action figure…
Belt buckle with glue on clips to attach to any generic belt. Best printed flat on build plate with ironing enabled Clips attached with superglue Main buckle can be heated gently and pressed around bottle or curved object to give a better…
This is a tuning and waxing stand for snowboards. It uses a M10 screw and nut to clamp to a table or workbench. This model is a remix of this model by 0161design to fit the MK3 print bed. Print instructions Printed with 4 perimeters in…
You ever look at one of the containers from a recently-finished Pringles Snack Stack and say that sure looks like a cowbow hat? Me too. Print it flat, use heat to carefully bend the brim to your ideal shape.
There are 4 different cowboy boots made with AI. I touched-up some blemishes. You can use them just as deco pieces or as pen holders in the office. Fun detailed prints. I did not find too many cowboy boots of that sort around. Enjoy
Wanted a higher quality cowboy Fred the frog for a friend
Mod of original hat and foot to make hat and boots
This is our best catapult yet! 2 spiral springs power the winter snowball catapult. There are print in place bearings to help us throw further. A roller on the trigger makes it super smooth. Prints with no support in PLA. Print your own…
Giddy up with the "Dog Wearing a Cowboy Hat Keychain," a charming accessory that showcases man's best friend sporting a cowboy hat. This delightful keychain is perfect for dog lovers and those who appreciate a touch of Western charm in…
Here an cool Mod and Cover for the Stealthburner Toolhead that Supports: LGX LGX Lite CW1 CW2 Designer: https://grabcad.com/sandman-8/models
A trailer for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets Remix of the smaller trailer. For me it was too small and it was too high compared to the car. So I remixed it. Also fixed the…
Lucky 13 Snowboard If you like it --> press like it :-) Snowboard as a remix for the funny lucky 13 figure. The original is from soozafone . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy to…
This is a extender for oil draining on a Honda snowblower with belts. -One model is made for 2009 HS970 with belts. This is the type with the “tongue” under the drain plug. You need to add support on the “wings”. The 18cm one fits…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
There are two parts: boat_dish_body.stl and boat_dish_deck.stl. Each part prints easily and without the need for supports. The deck, which can be removed for cleaning, fits perfectly into the body of the boat. The boat can hold large bars…
Designed to be printed with a Palette, Palette+ or Prusa MMU. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Category: Sport & Outdoors
I print this with pla no supports need it layer color change set 5 will fit in the holder
I tried printing a bunch of snowball maker ideas and finally decided to just make my own. The issues I had with others were they either would break easily, required too much support to print, required gluing/assembly, were hard to…
Intro Bring the slopes to your fingertips with this Mini Finger Snowboard – a fun 3D printable fidget toy that lets you perform tricks, slides, and spins right on your desk or anywhere you like. Inspired by winter snowboarding and…
The detail on the black plate might be a bit tricky if your adhesion isn't great. I used a 0.6mm nozzle and it still turned out fine. Logo needs supports. Box itself can be found at https://www.printables.com/model/479648-shadow-box
This model is compatible with the lego system.
This is an old school type of fire engine based on the Yellow Zil Truck Chassis model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added for…
These pegs are ment to be screwed in with a #6 wood screw. I screwed the top pegs into a piece of wood and attached that piece of wood to the wall. The base pegs are ment to be attached to the wall right above the tail of the board. The…
This is a cowboy hat that fits the lego inspired glue stick cap. This hat fits is directional as the front brim will have a slightly higher rise. Fits: https://www.prusaprinters.org/prints/150515-glue-stick-cap-lego-inspired
One of Crow's skins in brawl stars.
Snowboard sedící do stavebnice lego.
This model is compatible with the lego system.
If you print a Rocker hook then the second hook must be mirrored. Resolution: 0.2 mm Wall loops: 5° hook 5-loops / 30° hook 10-loops Infill: 5° hook 20% / 30° hook ~40% but more is better Material: PLA , PETG Supports: No Brim No Screw…
An excellent tool for making snowballs :))))))))))
Purely aesthetic. My dogs hated wearing it, but they look very cute. Once the other dogs get haircuts, I will add more photos! Supports are necessary
took a riptide mainsail holster left hand iwb and converted it to right hand owb
Lets print a snowboarder on a rail! This is a fun challenge where your patience will be tested.. Can you balance the snowboarder on the rail? See https://youtu.be/JJjutUP91OE for building instructions and more...
One of the lace lockers for my Snowboarding boots broke so I designed a parametric replacement using OnShape . This is for the thin inner laces of Snowboard Boot Liners , not the thick outer laces of the boot itself ( see photo &…
Cowboy belt buckle with long horn bull I would absolutely love to hear how it printed for you!
Cowboy Boots based on a 3-D scan
This model is compatible with the lego system.
In celebration of the upcoming live-action Cowboy Bebop, you can now have your very own zipcraft key! Choose between three variations: Solid key (easiest to print and assemble) Key with a separate outer jacket (outer jacket needs to be…
Remix to adjust for an M8 bolt. I cut up an old inner tyre of a bicycle to make the rubber surfaces. No glue required, you can press fit the bolt and nuts in place and screw on the plate. Printed with PETG, 6 inner walls for added strength.
A polar bear is snowboarding!!
Remix of a remix. Following changes: Adds the missing knob, sized for 3/8" bolt Adds a retainer for the nut resizes the hole in the tuning stand to accommodate the height of a 3/8" nut Resizes the hole in the bolt cap to accommodate a…
I modeled a high collectible value figure for gamers, collectors, and movie enthusiasts something they can display in a corner of their home or in their workspace. It is a visually and artistically high end product, at a level that could…
Works on three of the four "13" classed bots by Soozafone, albeit loose on Mini 13 (incompatible with Dummy 13). Trim off the little bumps on the inside if needed. No supports.
An ultra low profile stand for the Blue Snowball stand. 5/8"-27 mount for the mic. Just enough clearance to fully tilt the microphone on the screw. 70mm diameter base ensures the microphone won't tip or roll while still being a small…
The sandballs will have a diameter from 55mm. Models: Ball Cube Multi Sided Cube Print this model 2 times and combine them with a 5mm bolt. Have Fun :-)
You can see other one https://www.printables.com/model/1280120-corners-for-growbox-for-tube-16mm
Yeehaw! Give your camera a little cowboy flair with this hot shoe cover—because even your gear deserves to ride in style! Category: Hobby
I originally made this for my wife so she would still be able to access battery enclosures after her pedicures, but liked how it turned out so much that I thought I would share it. Printed in PLA with 100% infill for structural integrity.…
Go crazy…. Mix and match colors! Change the panel when you get bored! Change the panel when you have filament to use up! Also included are the hex textured grip panels by Slimjim240B. Print Settings for the grip Use: PLA+ or better…
The original model from oxo3dprinting is very realistic, but it doesn't print well with a lot of support material. This version has been sculpted to improve the overhangs on Ein's belly, mouth, and ears. Yes, he looks a little bit fatter,…
