Liczymy pasujące modele…
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…
This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports
[Update: Added another variant for "Wilton Gel Food Coloring Containers". There are now trays with these diameters: 25.5 mm (e.g. Army Painter, both standard and elevated variants), 33.5 mm (e.g. Citadel, standard variant) and 29.0 mm…
Organize the workspace for painting models. Utilize the maximum surface area of a Prusa XL with this painting station that measures 360x360mm. The station holds 17 cans of Vallejo paint, 17 ml/0.57 fl oz (diameter ~25 mm). In addition,…
When you have to shake paint cans, this is the best tool. Hold the shaker onto any battery-powered screwdriver, open the lid, insert the jar upside down, close the lid, and press the button on the screwdriver. The paint will be agitated…
Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux
These are simple paint supports. Three versions, with different rounding. On wood boards, depending on the weight of the piece you paint, the pointier ones may leave a mark, hence the more rounded ones. I recommend the 3mm rounded ones.…
I needed a holder to hold my paintbrushes horizontally and not on the wall. Couldn't find an existing one so made this. Included the STEP files and print files in case you want to modify it at all.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
⭐ UPDATE March 2026: I have decided to change the license to Attribution only, which now allows for Commercial use. Additionally many people have printed this with no supports without an issue. It's your call if you think your printer can…
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
Using the various pegs in any combination with the base plate, you can have this design hold almost any piece while you spray paint it. Best when used in combination with a turn table. The photo shows the Ironman mask faceplate mounted.
What? A holder to align a small plastic funnel with the body of a 15ml dropper bottle for paint transfer. Used to help transferring paints, as in this tutorial from FauxHammer Why? Because: You want to transfer your Games Workshop paints…
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Painting supports for placing freshly painted objects. The triangular supports with a ball tip can be safely placed under freshly painted objects to minimize contact. The triangular base shape helps them to remain stable even on uneven…
A must-have tool to help get the paint off of your paint roller at the end of a job or between shifts. Provides an easy way to squeeze the bulk of the paint off of your paint roller before rinsing the rest down the drain. This is an easy…
Height-adjustable support cone. Thanks to its regulation, it is suitable for pieces with an irregular surface base. Easy and fast printing without supports. Ideal for painting work, crafts, miniatures,... Our conical paint holder set has…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
I wanted to have a little more ergonomic handle. I redraw the model froms crath using the model as reference. I also added a short trigger for one finger and later on a rubber band (just drill 2 holes in each pieces and use standard…
Update 4/Feb/2024 Light Version and Extra Light Version added. Diamond painting - Trays and Stacker Printing Trays I recommend to print the trays in PETG for better durability. Layer high: 0.20mm Printing Stacker The stacker can be…
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Modification of the model by Plutho to accommodate two instead of three AA batteries. This model may need to be customized as needed.
~ Design collaboration with Azurefilm ~ A pot design inspired by an overflowing paint bucket Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of…
M3 nuts and screws Bearing 608
The Universal Peg Board System is a mechanism for printing pegs and the useful part separately. This is a useful part that holds a spray can. It has a railing that keeps it from falling off during a mild earthquake (welcome to…
I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…
Paint Pouring Flower with 10 spouts. The Flowers dimensions are approximately; 70x30 mm. This Flower features unique holding tabs on top to allow easy lifting from the canvas after its used for pouring paint! I recommend printing with a…
The special thing about this cup is that it is much wider at the bottom than at the top, so that it can hardly be knocked over. It is also flat enough to be easy to get into with a brush. In addition, the cup has a storage area at the…
Plateau tournant D195x27 monté sur roulement 608ZZ (D22 d8 H7) Le roulement est facilement trouvable dans les magasins de skate, roller ou sur le net en utilisant la Ref 608ZZ ( https://tinyurl.com/r6swn5r9 ). PLA Remplissage 10% Couche…
Creating a spacer for an M3 screw Spacer for large screw hole Easy and fast printing Printing: Material: PETG Supports: no Orientation: can be printed from both sides
The second version of the stand for painting models with hinged holders and larger locking wheels. M3 nuts and screws Bearing 608
This is not just another Painters Pyramide! OK, basically it is. But I made an additional adjustible version to avoid wiggling. I provide a 3mf-file which contains a set of 3 non-adjustable and 1 adjustable Pyramids. All together these…
These compartmented paint-pouring cups allow you to pour up to four colors of paint simultaneously. Use them with acrylic paints to make pretty flower pots and whatnot. This is derived from a design by Jacob Brooks and remixed by Jeremy…
🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…
The footprint has been made as little as possible to avoid marks in your newly painted objects. Therefor, they are well suited for stacking multiple painted objects on a small working area. Stackable for easy storage Red (Big) :…
Kids love to paint, and when they paint, the need a little squirt of each color. The kids in the school love these little ten pot paint organizers. Your little ones will love them too. When the day is done, it's easy clean up in the dish…
EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…
Introduction Do you have a woman in your life? Does she have hair? Or maybe you are your self are a person with hair. Then do we have the thing for you! Here we have an outstandingly modelled claw clip that holds hair all day long! And…
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…
Při tisku 4ks stojin je potřeba pozastavit tisk a vložit matice M5 - v gcode je to již nastaveno. Budete potřebovat 8ks matice M5 a 8ks šroubů M5x20 While printing 4 peaces of stand, it is necessary to pause printing and insert nut M5 -…
You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…
Description: This is a universal hobby paint shaker I designed to solve a simple problem. Shaking hobby paint. It is designed to be used with a reciprocating saw. It may also work with a jigsaw though I have not tested this and may…
Tiny and simple paintbrush holder. Very easy to print, can be printed on every 3d printer. I uploaded 4 versions: V1: print 10 minutes V2 print 5 minutes V3 print 1 minute only (deleted) V4 print 3 minutes RECOMMENDED Print settings: (v2)…
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
I made this remix by scaling up the original model and tweaking it to make it fully FDM printer friendly. The original design by Redsing from Thingiverse looked great, but it was a bit tricky for regular FDM setups — so I reworked it for…
There is not much to say. I believe that the photos are self explanatory I printed with PETG but PLA would work too My son is named Felix. Please replace the name by yours or anything else as needed
Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod
Choose between 9 unique splatters! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
🖼 Dart Vader Oilpaint Art by AI .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA…
The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 6 x4 bottles (maximum Prusa i3 print bed) and 0 degree and 20 degree stand. If you wanna change number of bottles or…
A 3x3 base to keep your Vallejo (and Army Painter) bottles organized. Oooh, look, they stack too!
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE GRINCH FIGURE This 3D model captures the iconic Grinch with his mischievous expression and sly gesture. Perfect for 3D printing and adding a touch of holiday humor and fun to any space.…
A friend of mine shared a link to buy this kind of object, and I decided to make an easy to parameterize and 3D print version. ^w^ Usage: Simply press the object firmly onto the injection site (the side with the spikes facing the skin)…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Introduction: This case features a flexible lid and base that allow for quick pull-to-open and push-to-close use, while full-length threads keep the lid securely in place. The threaded design also allows you to adjust the length to fit…
This is a 5 color print. Created using Hueforge and midjourney. Instructions are for bambu slicer and prusa slicer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm (used a base layer of 0.24 to provide some…
Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…
A repair "kit" for USB-C plug casing. Depending on how much of the casing is missing, print “USB-C_cable_plug_repair_additional”. If only one side broke of then you can skip “USB-C_cable_plug_repair_additional”. Please also note the…
Paint Carousel 35 Bottle paint rack with a lazy Susan to spin it around. I designed the rack for Mission Models paints but it works well for Model Master, Testors, Badger Needle Juice and with the insert Vallejo. There is a Test Fit to…
I created this model to remove the arm from a Ikea FRIDANS roller blind but the model may also be used to replace broken parts of common roller blinds. The mechanism is working quite well, if you are having issues please write a comment…
3d map of the Sagrada Familia and its environs In a 3d map with the reliefs of the city and the surroundings of the monument (it is a similar representation by copyright).
Needed to fix my patio umbrella. Two of the arms broke after the wind knocked it over. Just needed to use some M5x35mm bolts with some washers and nuts. I used some nylon washers since it's supposed to be able to to articulate when…
A few years ago I found a moose antler shed in the woods of Northern Alberta. Inspired by the art of Steve Kerr https://stevekerrartist.com/art-work/moose-antler-paintings/ , my wife decided to try her hand at painting a scene on the…
Vor- und Nachteile auf einen Blick: + verbindung oder verlängerung von GT2 6 mm Zahnriemen + schmarl/klein/minimalistisch + Druckerfreundlich (Überhänge >55°, keine Brücken, etc.) + wiederverwendung von defekten Zahnriemen Einkaufsliste:…
stojan na maľovanie striekanie plastových modelov lietadiel vytvorený pre potreby opráv starých modelov. 1 x základňa 4 x L lišta 05 alebo L lišta 70 mm 2 x nadstavba krídlo 02 2 x nadstavba trup 02 4 x voditko 01
it is a tray to pour the little gemstones for diamond painting back into the container when you are done. they are also slightly bigger and less flimsy when using. the riges are the right distance apart.
Designed for twelve 17ml (25mm) dropper bottles and one water cup. ---------------- Für zwölf 17ml Flaschen und einen Wasserbecher.
EN Repair of scissor handles two models, : one for small and one for large scissors Print out the necessary template Heat the handle sufficiently (80-90°c) to seal it into the handle. Do not overheat, try several times to find the right…
The tall versions of their Paint tip over all the time! Use this holder and you will not loose your expensive paint
Designed for eight 17ml (25mm) dropper bottles, one 60ml (36mm) bottle and eight brushes. ---------------- Für acht 17ml Flaschen, eine 60ml Flasche und acht Pinsel.
Png de harry potter preparado para imprimir con 4 colores. Al laminarlo: Capa inicial 0.16 Altura de capa 0,08 Colores usados Negro until layer #5 at 0.48mms Rojo until layer #11 at 0.96mms Madera o crema until layer #22 at 1.84mms Blanco…
Paint stand This is my own design from scratch but I would like to first credit @jonnyboy_star_535044 on Printables for inspiration. This is designed to print on a 220x220mm print bed, without supports. I have made the joins quite loose…
Connecting parts might fit snug. I've provided 2 gcode files with the best print orientation for each necessary part. Front leg is optional to provide support against tipping forwards.
I used black and white Overture PLA Start with black and swap to white at layer 6
A simple holder for Testors model paints, holds up to 24 bottles at a time.
Stand for up to 10 paint brushes, with 5 horizontal storage supports (three for paint brushes 8-9 cm long and two for paint brushes of any length) and with 3 removable water cups. Print without supports. Stojánek na max. 10 štětečků, s 5…
I had bought a huge 121 bottle pack from Army Painter, and had just left them in the box they came in for the longest time. I thought it would be fun to try my hand at creating a stand for them. My goal with this design was to hold as…
Clip to replace a broken one on your dryer horse with 15mm inner diameter rods. Print two halved pieces that join when forced into the rod. No supports needed due to half cut design.
5 Color Hueforge model of a mech in a field at sunset. DO NOT RESCALE Ive included a small 100x100mm and a large 200x200mm model slicing is the same for both Colors used: (all matterhackers build series /polymaker (I do not know the…
This is a holder for Vallejo 17ml acrylic color bottles. The holes have a diameter of 26mm and can also be used to hold other colored bottles. Each rack can hold 4 bottles.
Print profile 0,20mm SPEED (Input Shaper) No glue needed, all snap connections, and I recommend printing in PLA for dimensional stability, however others have had success with PETG as well. As described by the original author
This 3D-printed jewelry-making assistant is designed to make painting and assembling handmade wooden bead jewelry easier, cleaner, and more organized. The design features three useful sections: 1. **Painting area:** A board with 14 holes…
We have a few Tommy Bahama Beach chairs and after many years the plastic part that connects the chair frame and allow for the chair to fold broke at the main junction. The challenge was to create an ASA 3D printable part that can take the…
Glue the two parts together and replace the old one with the new one.
This is my paint carousel. i adhere bottom part with museum wax. some post printing sand and deburring is needed. I used some petroleum jelly as lube and everything spins like a dream. I printed with PLA on a .6. used
4 Color Hueforge model of a cowboy at sunset. DO NOT RESCALE Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Red Transmission…
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
The seat adjustment knob on my 2015 Toyota Tacoma broke off. Glue wouldn't work so I designed a ring to reinforce the broken gears and an inner part that spins to hopefully provide more bite to the inner shaft of the seat. I used an M4X20…
The clamps holding my 25 odd years old Klick fix attachment to the handlebar broke. I found it was quite easy to print a replacement. Print with PETG, flat on the bed. Use roughly 6 perimeters to make it strong.
Magnetized tops for Redgrass painting handle with groves for 40 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. The rack for those plates are also working, just stacking…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
