400 modeli
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux
Wydruk około 41,99 €–51,32 € nettoWstępna wycena jednego wariantu
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
Here's a holder for 12 Army Painter Warpaints bottles. My design intent was to keep material usage to a minimum.
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
A mixing tray for oil , acrylics or water colors. just use areas around Bob , to blend colors… make his space happy! you can use Bob to get off excess paint off your brush too.. in memory of Bob Ross (fan art)
Wydruk około 2,86 €–3,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
Here's my take on the painter's pyramid. I've designed it in three sizes, measured by the long edge of the triangle. The design is meant to be 3D printer friendly such that you should not need supports to print this. Update: I printed 6…
These painter’s props (also called painter’s pyramids) let you elevate your workpiece while painting, staining, or finishing. The small pointed tips minimise surface contact, allowing you to work on both sides without sticking or marking.…
Cleaning your rain gutter can be difficult if your ladder is too short to reach the roof. Therefore I created a little scoop (or shovel) that can be mounted on a (telescopic) Gardena stick. The angle can be changed in two directions…
Finger painter badge designed with the paint separated for printing with colours, dab of glue on each finger for a perfect finish If you want the silver colour change make sure to setup a filament swap
These are various holders for miniature / acrylic paints. 25mm (Vallejo, Army Painter, …) 33mm (Citadel / Games Workshop) If the need comes up for myself, I will add other sizes as well in the future. If you want to change them yourself,…
The great idea of the dry brush add-on for The Army Painter palette got my attention - since i was not satisfied with the provided models, i came up with my own solution. There is some headspace under the lid of the palette, which is…
This is an add-on for the Army Painter Wet Palette with different forms to test the amount of paint on the drybrush before switching to your precious models. Specifically with parts and features from my fantasy ruins sets: Base set…
Paint bottle holder designed to fit Vallejo, The Army Painter, and Reaper MSP paints. Each brush or tool slot has a cutout for easy cleaning if things get messy inside; it also helps fit The Army Painter triangular brushes. This model has…
Got this idea from the video in the first photo Print at .01 to make sure the cutting edge is sharp. May be best to print on a resin printer.
This is a dimensional model of the great The Army Painter Wet Palette (affiliate link). Be aware that the model is not intended nor optimized for 3D printing, it is a reproduction of the injection moulded part. The intended use of this…
This Easter egg painting holder allows you to work with eggs of different sizes, from chicken eggs to duck and geese eggs. In order to paint comfortably, it keeps the egg at 45 degrees, which achieves greater precision in the stroke with…
I like my army painter wet palette but never really liked the paint brush holder lid. This texture palette insert for the wet palette lid is remixed from other cool texture palettes. The large section fits perfectly and brushes still fit…
English It's just a small painter's pyramid. The existing templates were either too big for me or too unstable. I've tried to find a good balance. The pyramid is only 25mm high and (in contrast to the templates found) not so sharp at the…
I created a OpenScad Painter's Triangle for elevating an object while painting. I provide a minimum contact to the object. It is also stackable. The OpenScad code allows you to customize the height and width the triangles. Enjoy. 4may19:…
Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…
Gorilla tag cosmedic
A Gridfinity System 3x3 bin for tightly holding 25 Army Painter paint bottles (or other bottles with 24mm diameter). Designed to store the Army Painter Speedpaint mega set.
Got the army painter set for christmas + the ones I already had and I quickly needed a solution. So I whipped this up
Support free version of The Army Painter Wet Palette Addon - Drybrush Test
KEA Skadis - Paint Bottle Holde Print with a 0.4mm Nozzle It's made for 26mm Bottles like "The Army Painter" Happy printing!
Simple stackable painter's pyramids to print without supports. Most other I saw have circular holes on the sides, which are hard to print with no supports. This design has triangular holes for that reason.
Hexagonal motif paint stand for Army Painter bottles which holds up to thirty bottles. There are three designs: (1) Solid walls throughout body. (2) Body has 6mm wide side cutouts to reduce the amount of filament needed. (3) Body had 9mm…
A Tool for Straight and Flat Application of Painter's Tape on a Surface This design is made for 1" Wide Painter's Tape. By holding one of the handles and pushing against a surface, the tape is flattened leaving no air pockets. Refer to…
Shout out to wolffshaut for the great models! I just had to give it my twist with a foot for vertical printing and a little less angle on the cups. I tried to print this aligned to the x axis first and it came loose twice so I went for 45…
This model is a remix of Bryan Duke's fantastic model, the only thing I've done is to add some (very hacky, very quick) cutouts to allow for easier reading of the paint bottle's labels while they're in the rack. This doesn't quite make…
I remixed the original to fix a few issues I found when using it with my masking/painters tape. Problems The U shape that slid on from the side This design of the original made the model inherently roll thickness specific so as you used…
4X3 Gridfinity Paint rack for Vallejo and Army Painter paint bottles. Holds a total of 20 paint bottles. Each row is slightly tiered for easier visibility.
A holder for 6 Bottles of Army Painter Bottles. Object dimensions provide clean mounting for horizontal and vertical expansion, without wasting space on your Board R1: Increased diameter of hole for bottle by 0.6mm, because some bottles…
This is not just another Painters Pyramide! OK, basically it is. But I made an additional adjustible version to avoid wiggling. I provide a 3mf-file which contains a set of 3 non-adjustable and 1 adjustable Pyramids. All together these…
It is a stand that already exists in a similar way. Only this can be connected with bolts and will be expanded for other parts as the dimensions allow. You can print the parts with a printer that has a print bed of 220mm+. The two upper…
Painter's Pyramids (aka Painter's Tripods) securely elevate your project off the work surface with minimal contact, allowing painted, stained or glued projects to be completed in one session with less mess and great results. The tabs…
Pyramid Painters Cone - Stackable - Scalable in size and requirements Painter’s pyramids for creative projects Lift your project off the work surface while coating, gluing, or finishing. The pyramid shape stays stable and touches only a…
Main item is the Brust Palette, which I use in place of the brush holder comes with the Army Painter set. I have also worked up a compatible base and lid (optimised for FDM printers) if you don't have the Army Painter set and a cutting…
EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…
Want to use a painters pole to hold up your Starlink Mini? This adapter fits the plate that comes with the unit. A threaded hole is provided that fits the standard painters pole thread. I would print with 4 walls and a decent amount of…
I'm working on a Games Workshop Citadel version (Stay Tune)/ Je travaille sur une version pour Games Workshop Citadel (Restez à l'écoute) Video on Reddit:…
This case is designed to elevate your low power radio device 30~40 in the air on top of a standard telescoping ‘painter’s pole' available at many hardware stores and keep it protected from the elements. An upgrade from the case I designed…
This is a remix model of Painters Tape Labeler from: https://www.printables.com/model/602611-painters-tape-labeler/file I modified the dispenser and changed the design of the teeth so it would print with less support and reinforced the…
A simple holder for dropper paint bottles, such as used by Vallejo, The Army Painter, and similar. It is designed to hold nine bottles, and secured to a standard pegboard that can accept 6mm pegs. This is remixed from an earlier design on…
An aligator style clip to assist with model painting. Clip strength is firm and feels like a strong pinch on skin. Model clip allows for different style of teeth caps to be added - Tall, Short and Wide. Model clip can be attached to BBQ…
Took inspiration from this Vortex Mixer and modified its parts to fit my hand held drill instead to mix my miniature paints, vallejo/citadel/army painter/etc. https://www.thingiverse.com/thing:534894 This requires two hands. One to hold…
A modified of the Clip Stick to accept basic painters poles or even broom handles. The threaded portion is a little thicker than it needs to be but it helps when wearing gloves. Supports - Yes Print with the threaded part flat for minimal…
To make painting of parts easier I made some painter's pyramids to elevate the workpiece (thought there must be a better way than putting nails in strips of wood every time.) There are already a lot of designs out there, but I wanted to…
This will fit 30 paints per unit and the units slot into each other to create a larger rack. The 5 row version takes 5 fronts, 5 backs and 2 sides make one unit. Paints fit upright or upside down. Glue parts together with epoxy or super…
I used it to mount this on a expandable broom stick. Printed in PETG with 4 walls and 25% infill to make sure its holds.
Painters Pyramid Support when painting things Category: 3D Printing
I wanted a way to organize my paints so I used Fusion360 to whip up this stackable paint organizer Print instructions Printed on the mk3s with .3mm layer height. No supports needed.
I was always annoyed when my painting cones or pyramids moved away on the workbench when oiling or even polishing wooden boards … So I just thought about having a painters cone which uses my workbench dog holes, or which I can also screw…
A simple holder for dropper paint bottles, such as used by Vallejo, The Army Painter, and similar. The earlier design I made was for five, but there was some extra space so I replaced the ends with these seven bottle holders. It is…
My version of the vase mode paint organizers, this simple paint stand can be mostly printed in vase mode. The containers are 28mm minus wall thickness, and should fit most model airbrush paints. Set vase mode with a wall thickness of at…
This is an easy turnable painting table and you only need one hand for it while you can paint with the other one! The small cubes are for holding the position for clueing it down or just hold the casing together which should no problem…
I made these painter pyramids with holes in the solid base so I could screw them down to a piece or wood or even cardboard. It holds the pyramids in place so you can move the work piece if need be. They stack nicely on there side for…
One of the simplest designs for a painter's triangle with a minimum of print time and material usage. Three of them will be ready to use in less than 30 minutes. Edge length is 40 mm. PLA, PETG – use whatever is available.
This allows you to use a painters pole to attach a pool skimmer. Printed in Petg 0.04 Nozzle 20% infill
If you've looked for a painter's pyramid before, you're probably aware of the variety of designs out there. I faced the same situation and, while many models had great features, none quite ticked all the boxes for me. That led me to…
These painting stands offer multiple advantages compared to traditional models: Unfailing Stability: Thanks to their three-point support design, they ensure perfect stability on any surface. Interchangeable Tips with Locking System: The…
A taller version of Stack 'n Paint: Stackable Vallejo Paint Bottle Organizer to fit bottles with custom paintable caps such as Paint Bottle Cap Swatch Adapter
Quick little modification to make the original file easier to printer while fulfilling the original intention
Pyramide für Oberflächenbehandlung von Holz (zb. ölen, anmalen oder lackieren). Mit Schraublöchern um diese auf dem untergrund festzuschrauben.…
Box for Army Painter Hydro Pack. Holes are for magnets 6x3.
Update 11/24/2023: I added a lid to go on top of the stack I wanted to create a stacking holder for my paints (14 each). They go into a bin for storage but stack well enough for a desk. I wanted it to be large enough to hold most of a…
Army Painter 100ml bottle holder
A tape dispenser for painters tape
Paint rack for Army Painter, Vallejo, Scale75 etc. Includes STL, DXF for laser, and F3D. Wall mounted. Suitable for 3D printer or laser cutter (mountings need to be 3d printed). Requires: 4x wall screws to mount, or 8 for an extra secure…
Tray for 12, 15 or 18 Armypainter bottles that you can stack on top of eachother. The feet screw on and are only needed for the upper trays since the top of the bottles on the bottom tray slots in to the feet on the top tray. I made 3…
Painters pyramid to set things on while they dry. V5 has blunt corners for all the corners. Category: Tools
Pen holder for Army Painter Speedpaint Markers. Holds 37 markers
Painters palette tool, simple. Enjoy!
Climbing stick clip with painter pole threads for mounting. I attach it to an extendable Mr. LongArm pole. Reuse some twist ties to hold the carabiner and gate open. Printed with default settings (0.2mm layers, 0.8mm shell, 10% infill, no…
A paint stand for 20 Army Painter paint bottles. The slots are designed for a snug fit for 24.5mm diameter bottles (it should fit both Vallejo and Army Painter). It is in 4 parts to avoid excessive filament usage. Gluing together is…
Stackable Painter's Pyramids These keep your paint items raised with a small point of contact. I've included two sizes. 23mm tall - 0.17 meters 46 mm tall - 1.22 meters Check out my selection of Household Items. Colors used Yellow - Bambu…
Clip Stick attachment I made for a telescopic painters pole, diameter approximately 22mm. No moving parts, compliant holding of the gate. Friction fit, no glue needed. Carabiner is held open without the need of tape or elastic band,…
Here's my painters wet pallet, complete with texture pallet this can be printed in one piece without supports, hinge in place Print in 2 parts/clip together version: https://www.thingiverse.com/thing:6922138 Category: Art Tools
The stand was made for army painter brushes for a dry brush. no support needed. Print flat on the printer table. Holes: 2x11mm 1x8mm 14x7mm 2x5mm Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0,2…
A holder for the Army Painter wet palette to be mounted on the IKEA Skadis board. It has space for extra foam sponges and papers. It uses the skadis universal hook to attach to the Skadis board (original can be found here:…
Using a painter's pole for an antenna mast? You need an end to screw on securely to hang a wire or carabiner? This oughta work for you. The internal threads should match your painter's pole… matches my LongArm Painter's Pole I got at…
A simple holder for dropper paint bottles, such as used by Vallejo, The Army Painter, and similar. It is designed to hold five bottles, and secured to a standard pegboard that can accept 6mm pegs. This is remixed from an earlier design on…
I have this posted on cults if you would like to support me! I was tired of having nothing to put my paint on but I didn't want to shill out money for a wet palette. So, I came up with this! lots of small holes makes it perfect for a…
This is a texture palette insert for dry brushing that fits inside the lid of The Army Painter wet palette while still allowing the lid to close. The source files are also included as well as a blank version of the wide textured side so…
Verschiedene Helferlein die das Streichen von Brettern o.ä. erleichtern kann. Möglichst kleine Auflagepunkte verhindern das Festkleben. Mehrer Versionen mit unterschiedlich großen Auflagen. Different tools that can simpfily painting of…
Army painter Wet Palette Skadis holder
Building my painting and model working corner. After some research I didn't find any Paint Shelving/rack I liked so I decided to project my own. Result completely meets my needs and I really like it. So maybe I will be not the only one.…
This is the rack I made to hold my Army Painter Fanatic Paints. It has three rows with six slots each to match the six color groupings of the fanatic paints. Works with Vallejo and other 17ml dropper bottles, too.
This 2x2 gridfinity compatible holder fits 9 Vallejo / Army Painter bottles (17/18ml size). The perfect height to securely support the bottles while still allowing you to see the sticker text.
Update: This is for Heltec ESP32 LoRa boards and an 18650 battery. Since I've been working with other boards, I have switched my development efforts to a more universal style “radome” for GPS/LoRa/Meshtastic/RAK WisBlock style devices.…
These paint racks hold 12 dropper bottles each across two rows, packed as densely as I could get them. They come in an A and B version which can mount flush with each other across (pretty tight, but they fit). In other words, if you want…
Overview : I have several painter’s poles that adjust to various lengths. I’ve developed a number of attachments for them, but the ACME thread definitions in Fusion 360 are not compatible with the ¾” (075) x 5 tpi definition used for…
Basic pyramids for painting projects. Wanted them to be a reasonable size and barely fit 4 on a mini+ build plate.
Stainers or Painters Pyramid/Caltrop. This little doohickey is optimized to create and open up space while spray staining or painting. I would not step on this shiza. The voronoi version is questionable. I realized it would get full of…
Just a quick design I made for my wife. She got the army painter mega paint set and wanted to see how the colors would look on a printed surface. the color card fits all of the army painters colors (and some extra) and is modeled after…
