Liczymy pasujące modele…
A measure with two pointed tips 10cm apart from each other for use as a scale reference in photogrammetry work.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
A measure with two pointed tips a fixed metric distance apart for use as a scale reference in photogrammetry. Designed flat so you don't have to worry so much about stepping on it.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
A measure with two pointed tips a fixed amount of inches apart for use as a scale reference in photogrammetry.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Print recommendations : Material : PLA Layer height : 0,3mm Brims : 5mm Perimeters : 4 infill : 15% Number : 3 Details : Printing time (for 3 models) : 21min Filament used (g) : 4 Note : The models shown on the picture are the "20mm…
I watched Josef Prusa's video on photogrammetry and tried it out with a donut hole. Uploading this as part of the gag print contest.
At the entrance of many sacred Japanese shrines, gardens, etc are these Komainu “Lion Dog” statues--usually in pairs, on either side of the entryway. I took about 100 photos of this komainu at the Portland Japanese Garden, and then used a…
Photogrammetry scan of a starfish shell I got in Croatia in 1998. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with an iPhone X and Meshroom was used to reconstruct the…
0.4mm nozzle -QUALITY- 0.08 Layer height Ironing Type - All Top Surfaces -STRENGTH- 5% Infill Gyroid infill pattern -SUPPORT- Enable Tree supports auto
Printing instructions So far I have printed this model up to a size of 40% scale of the upload. At that size, it was already sensible to support the middle of the belly with some support. But I do not recommend support at the head or the…
Downloaded PolyCam and just started scanning a bunch of figures and sculptures around my house and loved how this one turned out and how relatively easy it was to capture. I Recommend this app, unlocks a whole new way to 3d print and view…
A photogrammetry scan of a Sphinx statue in Prague Rudolfinum. Postprocessed in Blender 2.8 The photogrammetry software used is free and here's the video guide: and an article guide:…
So, what's this then? If you do any kind of photogrammetry, markers are great for ensuring that the software ‘recognizes’ what areas are shared between images. While scale markers make it far easier to lock said scans to the correct…
Using my phone to take pictures, and some photogrammetry software I reconstructed a lost pair of earrings for a friend. After cleaning up the model in Blender I printed it in resin (Mars 2 Pro). I used Vallejo Model Paints for the wood…
This starfish was scanned and exported into a stl file that is perfectly textured.
Photogrammetry scan of Antonin Dvorak's statue, which stands in front of Prague's Rudolfinum. The pictures for photogrammetry were taken with a Panasonic GH5 and Meshroom was used to reconstruct the model following this tutorial:…
One of my first tries in photogrammetry, with a really basic stand. My mother really likes the series, so I had to try it. The model is still a bit rough at some spots, but I did what I could with my limited skills. Original sculptor is:…
This bread photogrammetry 3D model is a highly-detailed and realistic representation of a freshly baked loaf of bread. The model was created using advanced photogrammetry techniques, which captured every detail, contour, and texture of…
I needed something quick and easy to create. There were numerous 608 Bearing turntables out there but none that fit my spool, most were too wobbly. I included Step files and a Link to ONSHAPE with parametric variables to drive dimensions…
Photogrammetry scanned bear that was initially carved out of red wood. Used Meshroom to compile the images of the bear. Print instructions Recommended to use supports for the nose. Will print without them but may be create spaghetti.
Red Dead Redemption 2 is one of my favourite games. I've made this model using Meshroom and in-game photo mode screenshots. You can watch the whole process here: https://www.youtube.com/watch?v=cCq9qCuH7FM Model processed in blender later…
A spiral sea shell I captured via photogrammetry. This was only my third attempt at photogrammetry and came out well. I have not printed it though prusa slicer accepts it. When it asks you to convert units for meters to mm accept the…
I wasn't sure if I should post this in everyday essentials. However, for some of us working in fields where we need to be able to share and pass around objects, be it for education, research, design, etc, having the ability to digitise…
Since my original upload got a lot of downloads, I thought this is only complete if Columbo gets his dog as well. So here it is. Original sculptor is: Géza Dezső Fekete (1939-2021) If you like it, visit Budapest, and check out his life…
Photogrammetry scan of the Sitting Woman Stute by Václav Bejček from 1967. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with a Panasonic GH5 and Meshroom was used to…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
This is a photogrammetry scan of a bust of Roman Emperor Antoninus Pius (reg. 138-161). The bust is located in the "Saal der römischen Bildnisse" at the Glyptothek in Munich (Item Number 337). I made around 70 photographs from different…
Top is 20 mm in diameter Bottom is 50 mm in diameter Height is 100 mm
The original design of the Ciclop scanner was by BQ Educación, a brand of Educación y Robótica, S.L.. The design of the Ciclop was released as open-source which allows the design to be modified and extended as required. A particular…
I created this model using Cyberpunk's Photo mode and using Agisoft Metashape - a Photogrammetry software, with a little post-processing in Blender. I describe my process a little bit here: https://www.youtube.com/watch?v=c_AoHm1NOzY…
Just startet with 3D scanning (photogrammetry) using Meshroom and therefor wanted my own turn table. Features: printed only (tested it with a object weight up to 5Kg) optional integrated reference points optional antislip or mounting…
The 3D-scanner is built from a kit named ‘openscan basic’ available at https://www.openscan.eu. I printed the plastic parts myself. The original model has been established by putting together 80 photos from different positions via…
3D Photogrammetry Scan of statue in Sedlčany, Czech Republic named “lidé bez domova(homeless people)" The monument is dedicated to people who were displaced from Sedlčany during World War II. The Sedlčany region was part of the Waffen-SS…
A repaired model of a 3D scanned pumpkin via photogrammetry. Just started out, so the repairs aren't the best. Overall scan is decent, though. Bought a cool lookin' pumpkin, but knew that it will eventually rot away. So, I decided to try…
Photogrammetry scan of my personal "froggy bank" Print instructions no support needed
I used 3df Zephyr Free to 3d photogrammetry to make a STL of a Robby the robot latext rubber glove molded from the the screen used glove. The scan was less than perfect in detail and surface but Maker Zarior "lets call him Dan, took the…
This model consists of a 300x300 base plate with slots for 25 tiles. This is ideal for 3x3 ArUco patterns for ground control of drones. This design is heavy enough (~610 gm) to withstand wind and vibration. It's weatherproof. The tile…
The material used and recommended here is matte black PLA. To further reduce any reflections, I sprayed the turntable down with matte black spray paint. I took the photos using my cell phone on a tripod every 3 seconds at 4 levels of…
This printable features the Austria statue, an allegorical bronze sculpture created by Austrian sculptor Hans Brandstetter in 1891. Originally placed on the Hauptbrücke (Main Bridge) in Graz, Austria, the statue was relocated to the…
This is the Church of St. Anne, located in Vilnius, Lithuania. I 3D scanned it using photogrammetry and 3D printed it as my final history project. It took around 500 photos from my drone and DSLR, and after some errors, i had an okay-ish…
Tiger Statue 3d Photogrammetry Scan
I was looking for an archaeological trowel to 3D print as a toy , but I could not find any printable models. While searching, I came across a detailed photogrammetry model of a real archaeology trowel , so I decided to adapt it to make it…
Turntable made from the bearings and aluminum rods from the mmu2s spoolholders and the mk3s feet. (22mm bearings and 8mm aluminum rod) It uses a prusament spool as its base and a cutout of a Prusament box to have a good underground for…
Coded targets for photogrammetry designed for use with Agisoft Metashape. The center of the model features a cavity for a 2x8 mm magnet.
https://umenipromesto.eu/katalog/detail/1865
Photogrammetry model of this statue: https://maps.app.goo.gl/4bmZfKqWttUHPNgU6 No support is needed.
This is the famous Horseshoe Bend in Arizona. This is not an ordinary height map driven model. It is a photogrammetry scan of the 3d information in Google Earth. So it's essentially a copy of a copy, but still plenty accurate. Normally a…
Had this little thing around and wanted to test out PolyCam. Raw scan was pretty rough and needed some touching up in Blender. Interesting that the surface of this model is suppose to be rough and weird like it was make out of clay…
WISH I HAD AN XL- I had to print this in several pieces. The cam will need a little sanding to fit perfectly and work correctly.
This 3D scan captures a life-size model of the iconic Mozart bust found in the Graz City Park. I was particularly drawn to this piece because of its striking resemblance to Mozart’s death mask, showcasing the composer’s delicate features…
A scan of a ceramic seal I bought as a souvenir since it was adorable. It's 125mm long at 100%, roughly. (5 inches-ish?) (Used RealityCapture to scan it, in case you're curious.) Unlike most things I've printed it's pretty lumpy and…
A bear model I made using photogrammetry. The model shown in the photos is made using transparent fillament.
An old door decoration digitized using photogrammetry (Meshroom)
Test file produced to test COLMAP-CL>Meshlab>Meshmixer Workflow. https://www.agisoft.com/downloads/sample-data/
https://www.vetrelciavolavky.cz/sochy/reva-divka-s-hrozny
Photogrammetry practice on a gourd. Category: Scans & Replicas
100x10mm tool for scale calibration of 3D scans rendered from photos. (i use Meshroom/MeshroomCL)
My first shot at photogrammetry. Meshroom for the file, Meshmixer to clean it up and .2 Quality with supports everywhere on PRUSA slicer. I need to go back and eliminate the base but I'm happy with the file and how well the prints,…
A small, easy-to-print rotating turntable for object scanning with a phone on a tripod (photogrammetry). The platform is driven by a 28BYJ-48 5V stepper motor via a ULN2003 driver and a simple spur gear transmission ( 20T pinion → 60T…
This was a test to see if my elderly machine and I could even perform a photogrammetry construct using OpenMVS, OpenMVG, COLMAP, MeshLab, Meshmixer and other software. While a model was surprisingly created using this convoluted method, I…
My “Mole” Scanner came with a 200 mm scanning table, which was too small for my needs. So I designed this larger table of 380mm diameter. It replaces the original table and fits onto original rotator base which is 124 mm diameter. The…
I have the dream to make it better: contact me. In the future, I’d love to develop this into a complete 3D scanner , integrating advanced controls like a dual switch system for better rotation control and an IR LED to synchronize the…
A drone photogrammetry target. I printed it in grey and black as the white/black targets are often overexposed. Has a central dot that should be quite visible at 1-2 cm GSD.
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ I scanned this statue Johann Josef Fux
This 3D model of Yaroslav Usenko (yep, that me) bust is perfect for all kinds of creative uses! Whether you want to use it for art, a joke, or just print it and admire, this model has you covered. This highly detailed 3D model represents…
https://www.vets.cz/vpm/42611-pomnik-tomas-garrigue-masaryk/#42611-pomnik-tomas-garrigue-masaryk
Photogrammetry target for scaling and color calibration of underwater 3D models. Each bar has four 12-bit coded targets from Agisoft Metashape, and a cut-out shape for a Keldan Color Checker card. There are two cut-outs to add some…
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ I scanned this bust of Paula Grogger
https://vetrelciavolavky.cz/sochy/mir-1
Some of the photogrammetry services or programs became out of free by time. I wanted to share my realy free method for current time: After taking a series of photos or extracting extracting them from a video with VLC, i edit them by GIMP…
I shot 168 photos of this statue, "Large Head with Beard,” by Shay Rieger (1958). The point cloud render took 13.4 hours to chew through. It was a mess. Noisy as hell and a huge, gaping hole in the skull where the very faint sun had been…
The print turned out quite robust using PLA with a 30% infill.
https://mapy.com/s/hehadosocu
https://eknihy.slovackemuzeum.cz/slovacko/slovacko-2013-17.pdf
https://vetrelciavolavky.cz/sochy/vinna-reva
https://www.vetrelciavolavky.cz/sochy/zena-na-slunci
https://www.vetrelciavolavky.cz/sochy/muz-s-kamenem
Photogrammetry scan of cast
Simple clone trooper helmet made using photogrammetry and blender, scanned from a Captain Rex helmet. Can be used for decoration purposes. Suggest printing with supports as it is not optimized.
This part allows for a simple if not elegant way to connect the housing for a full-frame digital camera and lights to a Dive-xtras Barracuda Dive Propulsion Vehicle for use capturing high-resolution still images intended to be used to…
Digitized using Meshroom
https://www.vetrelciavolavky.cz/sochy/polibek-1
Digitized using Meshroom
Digitized using Meshroom
I made this one a few years ago to see if it improves taking images of my forearms for possible custom-tailored projects. It kind of worked and kind of didn't for the scan results, but it printed pretty easily, it's a large one so makes…
Coded targets for photogrammetry designed for use with Agisoft Metashape. The center of the model features a cavity for a 2x8 mm magnet.
https://www.vetrelciavolavky.cz/sochy/zena-na-slunci
Photogrammetry model of this statue: https://maps.app.goo.gl/4bmZfKqWttUHPNgU6 No support is needed.
https://www.vetrelciavolavky.cz/sochy/zena-na-slunci
https://www.vetrelciavolavky.cz/sochy/muz-s-kamenem
https://umenipromesto.eu/katalog/detail/1865
An old door decoration digitized using photogrammetry (Meshroom)
https://www.vets.cz/vpm/42611-pomnik-tomas-garrigue-masaryk/#42611-pomnik-tomas-garrigue-masaryk
https://eknihy.slovackemuzeum.cz/slovacko/slovacko-2013-17.pdf
