33 modeli
This is a remix of the raspberry pi3 case, originally designed by Joe and remixed by Wilts01 to enable bottom mount. Thanks to all original creators! Changes in remix: Remove the side mount, the side wall is flat again Added 4 bottom…
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
(Update 3/27/2024) Added Pi5B Bottom/Lid. (Update 11/14/2019) Added Pi4B Lid. (Update 4/12/2019) Uploaded IGES model files for easier remix. (UPDATE 3.28.2019) Pi3B Case: improved structural strength by slightly thicker walls. Desktop…
(Update 2/7/2023) Added a fan version for Pi3B Lid. (Update 11/23/2022) Added a fan version for Pi4B Lid. (Update 11/14/2019) Added Pi4B Lid. (the bottom part is same as 3B, so please use "Pi 3B Bottom".) (Update 4/12/2019) Uploaded IGES…
I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…
This case mount is a remix of the popular Rpi3b/b+ case by 0110-M-P. Other mounts I found used less ideal cases, and the mounting method wasn't the strongest. This version has all the great features of the original popular case, with an…
Case for Raspberry Pi model 3B
Designed to fit a Raspberry Pi 3b and a mmdvm single hotspot. Hole for a 30mm fan on one side. Air vents keep the rpi running at about 35C in my set up. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
I modified the Rpi3b Prusa Mk3 Mk3s Frame Mount Case form 3D_Dynamics. I have used the case he based his design on on my old printer and the rpi would run a little hot sometimes. And I wanted it to look more like the Einsy case of the…
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
(UPDATE) Added a picam quick mount! A Raspberry Pi 3B/2B case with integrated mount for Prusa i3 MK3, mainly intended for Octoprint/Octopi scenario. Also a quick mount for Raspberry official camera. Necessary parts: 4x M2 6mm (or shorter)…
13.12.2019 UPDATE: Door issues Fixed! But still WIP now... BASIC INFO *Multicolor Einsy box without the need to have MMU . You can design your own box & doors patterns or make them changeable... (You do not need to glue it!) ASSEMBLY TIPS…
Low profile Case for Raspberry Pi3B and B+ It allows easy access to the GPIOs, 15mmx15mm heatsink Hardware needed: 4x M2.5x6mm screws to secure the board to the bottom case 8x 6mmx3mm circular magnets
Just designed this case with fan and switch for my Octoprint server on a RPI3B on my MK3s Bear. There is a hole in the bottom where you could wire the Pi directly to an Einsy board, or you can simply wire the pi via USB and Power. Fan is…
Remixed version of Jerlo's Bear case with updated geometry and a Cybertronian flair.
The base that connects to the shed is the same. I reinforced the dish area and unified the hooks as well as extended them. This allows it to firmly grasp a raspberry pi 3B in an aluminum case. Any 28mm raspberry Pi case should fit in…
Boitier "jeedom" à base de Raspberry Pi 3B+ et carte X850 V3.1 pour support SSD. J'ai adapté le boitier depuis le super modèle https://www.thingiverse.com/thing:922740 Nécessite 4 vis M3*30mm
rpi BOX Category: Tool Holders & Boxes
You need 4x 12x2mm magnets and 2x countersink M3 screws. Don't forget to add a print pause to insert the magnets into the mount.
wanted to use the Electronics tower for my modified prusawire, since i didnt have any space under my bed since i started from a MK3 i didnt have the xbuddy box and decided to make one that is compatible and printable, plus some…
I saw a similar model from another user, but not as expandable, so made this to hold P4b or P3b for as many as you have.
A bracket to mount the Pi 3B on a bottom panel on the Rook 2020 MK1. The m2.5 screws are threaded in the plastic. The bottom plate needs heat inserts to fasten the bracket. added the .STP file so you can easily mod it to any other pi.
Remixed the ports to fit a Pi 3B
Updated: Reloaded .stl file. Original was exported using inches instead of metric making the model super tiny. Corrected the .stl file export in metric for correct model sizing. Also refined the .3mf model to smooth out the model…
(Update 4/12/2019) Uploaded IGES model files for easier remix. (Update 3/28/2019) Pi3B Case: Improved structural strength by slightly thicker walls. (Update 1/21/2019) Added small notches to better hold the lid and Pi case together. A…
If you do not screw the Pi3b to the base then the lid will fit. However I chose to screw the Pi to the base which then forced the lid up by the height of the screw. I have attached two pictures showing before and after. The uploaded stl…
I created little box for LM2596 DC-DC converter which is converting 12V to 5V for Raspberry Pi 3B+ server. this box sits on ALU KOMBI 30x30mm profile.
I have been trying to power a Raspberry Pi 3b+ reliably for ages and finally found a solution that works. Modified oljea’s original design to fit the board without any size changes and just adds the correct holes. I soldered the power…
The case for the RPi3B is - from my other project https://www.printables.com/model/1601936-5-inch-dsi-lcd-display-raspbe Two M5x25 screw Printing suggestions: Materials: PLA, PETG Layer height: 0.2mm Infill: 25% Support: None
https://www.patreon.com/posts/38832324
