Pi3B Case 2020 Extrusion Bear Frame with Regulator and Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just designed this case with fan and switch for my Octoprint server on a RPI3B on my MK3s Bear.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 783
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Just designed this case with fan and switch for my Octoprint server on a RPI3B on my MK3s Bear. There is a hole in the bottom where you could wire the Pi directly to an Einsy board, or you can simply wire the pi via USB and Power. Fan is connected to 5V/Gnd, used a 12V Sunon for this - But every 5V 40mm or most 12V 40mm would do the job.
The switch is one of these standard 19x13 or 20x15 ones from china.
Used the switch before the regulator, because I'm only remotely printing when I'm not at home - so the raspberry could relax in case I'm at home.
The case has an offset of about 4.5mm- so it will fit the optic of my einsy box. I'll upload a version which will be on the same level as the inner edge of the 2020 profile when i have time to redesign this.