951 modeli
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
D.R.O.P.P.E.R. Durable Rapid Object for Painless P.I.N.D.A. Easy Re-Positioning Simply drop your P.I.N.D.A. down onto this tool for the perfect (?) P.I.N.D.A. position. To be honest I don't know if it's the perfect P.I.N.D.A. position,…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
The same great SuperPINDA Precision Adjuster for the MK3S+ , now available for your MINI/MINI+! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe on your MINI/MINI+. Overview: The…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hides away by snapping directly into any 3030 channel, on both the Mini and MK3 series. Useful if you do frequent nozzle swaps. Tested and working, good offset for the distance for first layer calibration for the SuperPINDA specifically,…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Spatula 3in1 - Spatula, SuperPINDA adjust tool and Prusa Allen keys keeper. I used a credit card (0.80mm) as the right measure as we see the instructions at:…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
Print this model and simply swap spindles instead! Works great with my Dymo LableWriter 450 Turbo. This model can also serve as "replacement parts" as they are interchangeable with the original spindle parts that come with the printer.…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
45 rpm records to 33 rpm spindle included fusion360 file so you can customize print with engraved area on printbed change filament color when prompted if two color wanted 1st color is topface 2nd color is lettering and underbody
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This is a Spindlestop for a Lathe with 26mm Spindlebore. Extend it with M8 threaded Rod to the length thats needed. I added a 300mm Rod. For stabilisation you can screw one of the stops with M8 thread somewhere in the middle of the…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Diese beiden Anschläge werden magnetisch am Fest- und Loslager der Z-Achse der Volksfräse VF1 hinter der Spindelplatte montiert. Sie schränken das Spiel der Kugelumlaufmutter nach oben und unten genau um die Längen ein, dass die…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This may or may not work for your stairs, it's pretty particular to my staircase. Try out the test fit print first to save your time and filament. Here is a link to the onshape document where you can edit the diameters and spaces in…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
Om dat mijn oude pinda voederhuisje stuk was heb ik er eentje geprint. Je kan het aan de roosterdraad hangen. Er is ook een spie (wig) bij om het potje pindakaas te blokkeren. Het zijn vooral meesjes die er op af komen, de pimpel en de…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
UPDATE, Nu ook om tegen de muur de vijzen, Pindakaashouder vogels voederen. Now also to screw the screws against the wall, Peanut butter holder to feed birds. Porta mantequilla de maní para alimentar a los pájaros. Support à beurre de…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena jednego wariantu
This model has been updated and reuploaded. The parts have been redesigned to make the clock stronger and incorporate removable spokes. As a fan of George Nelson’s design work, I decided to recreate his Vintage Spindle Clock and turn it…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Searching for a better fan duct, i found this this (thx to xander1) https://www.thingiverse.com/thing:4124587 The initial tests weren't bad, but the airflow didn't fully reach the rear of the model. So I copied the design and gave it a…
Untested work in progress
With this sanding spindle you can use your drill / cordless drill / drill press as a spindle sander. I used it with 80 grit paper for shaping a guitar body. I will update this with different sizes in the future. Additional parts you will…
Last night I had to readjust the Super PINDA on one of my printers. I found a bunch of height gauges for the old PINDA/MINDA on prusaprinters.org, with a height of 1-1.2 mm: https://www.prusaprinters.org/prints/27679…
I don't like how the spool sits on the original Spindle so I adapted my old design to work with the Stock mount and also with https://www.printables.com/model/698864-anycubic-kobra-2-max-spool-kobra-2-plus-kobra-max- This Should fit most…
Prusa empfiehlt die PINDA mit einer Kreditkarte einzustellen, was mir nicht so gefällt, da man mit der Düse an das Druckbrett fahren muss und diesen beschädigen könnte. warten bis gereinigte Düse abgekühlt ist. Drucker ausschalten.…
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
Meet SpinDeck Fidget, a 3D-printed stress-relief toy born from the world of skate culture and magnetic magic. It’s made of two mini skate decks, each packed with 8 strong 8x3mm magnets that click, spin, and dance together with every move;…
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
This is a parameterized spindle for storing CDs / DVDs / Blurays with a screw-on top to prevent the discs falling off. It fits all the disc types listed above and has a small bump on the bottom so the bottom disc does not scratch on the…
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
A very quick remix of one of the parts in Tomas ' 100% Printable Clamp (Not only for Nipples! :-) to add a loop for attaching cord or chains . This is only the spindle part , so please see Tomas' original model for the other 3 parts you…
PLA works well, though higher temp materials will likely last longer if scraping while bed is hot. 40x180x9mm 1mm PINDA tool depth Rev 1: Slightly reworked geometry for strength and reduced overhang angle
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
(English version below) Erweiterbare Umkehrspindel basierend auf Vorarbeiten von Florian und Ideen von Florian, pinot und Stefan aus der ft:c . Zwei Endstücke mit beliebiger Anzahl von Mittelstücken. Die Endstücke alleine ergeben eine…
Will print without supports. You might want to use a brim for the taller part.
UPDATE: added instruction video in german (sorry no english. you dont want to hear my bad english for 20 minutes :D) added a whorl in single and dual color with tighter tolerances and a corresponding press fit test. Use those when you…
Designed specifically for the "Makita RT0701C 1‑1/4 HP* Compact Router" Spindle holder is designed to work with stock lead screws, linear rods and bearings as well as anti-backlash nuts. In order to use the upgraded Z-Gantry, new lead…
Introducing the SuperPINDA Precision Adjuster! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe. This first version is specific to the Prusa i3 MK3S+, however the Drill Bit…
Spindle with reinforced base for Yarn Spinner (Rotating Skein Holder for Crochet/Knitting) by mshipman
The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.
Use petg, abs or a similar heat resistant filament
Hier ein Remix. Das Blanko-Schild ist zum Ausrüsten aller Spinde gedacht, da die AGT Träger ihr eigenes Schild erhalten. So ist alles einheitlich und kann bei Bedarf ausgetauscht werden. Für den farbigen Schriftzug einfach im PrusaSlicer…
This is a 4 part cnc router dust boot assembly designed to be used with the Makita RT0701 router spindle or similar 65mm router spindle. The main body features 12 exhaust ports to expel the spindle exhaust perpendicular to the boot and…
It helps you offset pinda and nozzle far easier than paper and ziptie method. Note: It is for newer S Pinda 1.5mm only. For 0.8 older version, you could open freecad file and decrease pad from 1.5mm to 0.8mm, then export stl file. Steps:…
Ich habe diese höhenverstellbare Regalstütze entworfen, um ein durchhängendes Regal von unten abzustützen. Über die gedruckte Spindel lässt sich die Gesamthöhe zwischen 300 und 350 mm einstellen; eine Kontermutter sichert die Einstellung.…
Just a 65mm Spindle Clamp
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
I wanted to reusing the PINDA probe (from my MKS 2.5S) in a voron-styled x-carriage remake. This allows you to mount the PINDA just like the other probe normally used in a Voron 2.4/Trident/etc. In my case, I'm using it to compliment the…
NOTE: YOU NEED TO MIRROR THIS FOR THE 2nd SIDE. A simple holder, you can use a ¼" or 6mm steel rod or upside down end mill to hold it in your spindle and then clamp the dovetail of your test indicator to it as well. Best to position the…
I created this die holder because a D20 is susceptible to being accidentally knocked over or rolled, losing track of your precious life total. This model is scaled for a standard Magic: The Gathering spin-down life counter. If you want to…
When looking at the machine, make sure the fan blades are slanting from top left to bottom right as shown in the picture. There is now a shouldered version stl if you are having issues with the fan sliding up the spindle
Dieser Remix eines Modells von Hannes Weisbach LINK und das Netzteil-Gehäuse wurden während eines Twitch Streams entworfen, modelliert und aufgebaut. Das Projekt ist für die Inbetriebnahme des Sets “ER11 Chuck CNC 500 W Spindelmotor mit…
Simple 1mm shim to correctly position the PINDA probe much more practical cable tie Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: prusament PETG orange Category: 3D…
This model is compatible with the lego system.
I printed the original height adjustment tool which is awesome since it is a consistent reference to set the SPINDA height to, and also because it stows out of the way right on the printer frame after use. However, I have a Bondtech LGX…
Printable spindle container box (75x25x68mm) for Festool Systainer Organiser (such as item number 204852). Held in place using 2 pcs 5x5mm cylinder magnets. Best held in place with a small bit of glue. Make sure to align the magnet's…
12mm neodymium magnets, nut M3 DIN 562
for slim spools like the old Makerbot spools.
This is a remixed version of the Bear Extruder 0.7.0-beta ( https://www.thingiverse.com/thing:3716110 ) with the intent to allow the use of a standalone BMG extruder within the frame of the original extruder body. Compatible with…
Pastamatic - Filament Spool Winder - Drive (spindle) Retainer Helps to prevent the drive spindle from popping out of the gears …
Back Ground I found the “Spindle Wool” by efrost on Thingiverse. It was a good model both the size of the spindle and the STL file provided were problematic. So I designed this Spindle from the ground up in Fusion 360. I made this one…
With this JIG you can calibrate the height of your SuperPINDA probe everytime you need to calibrate it. It is 1mm height, between the recommended height for the superpinda probe.
This is a little mod for the MK3s to add a 608 ball bearing per Z spindle at the top end. The Z motors need to be a few mm higher (additional length of the spindles at the top end to fit into the bearing) so there also new mounting parts…
This simple accessory mounts directly to the pen drill to protect against material projection during processing. The spindle wrench is more convenient than the supplied fork wrench for small diameter bit. Accessories designed for the PFBS…
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
Inspired by the Abbey Bike Tools Saddle Height Bullet (part of their Fit Kit ), these tools are inserted into the end of an installed bicycle crank and allow for easy and consistent measuring of saddle height. Improvements from the Abbey…
I love this yarn spinner design but found that the spindle peg was a weak point - over time it would weaken and snap in half on me at the junction between the spindle and the base. I think it'll be much stronger if it's printed lengthwise…
This is a Turkish Spindle I designed for a friend who needed one for her weaving. It doesn't require supports. I printed it in PETG.
In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…
My wife really likes this model a lot but I noticed that I couldn't find it or something similar here on Printables so I wanted to reupload it. It uses a standard skateboard bearing to spin. From the original upload: Print both parts,…
Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…
A large spindown die to hold your smaller dice. Uses 8mm dia magnets (3mm thick) that are glued in place for the hinge / locking mechanism. The “CTG” lid has the logo of my local gamming store. To assemble: Items needed: Magnets, 8mm, 3mm…
This magnetic dust shoe is designed for 80mm CNC spindles . It was designed to be used with transparent PVC (>1.0mm recommended). The PVC is simply wrapped around the magnetic ring, after which the retaining ring can be press-fittet (e.g.…
This part needs no screws, it just sits on the top extrusion of the Ender 3V2 frame. It fits one ball bearing with outer diameter 24 mm and inner diameter 8 mm, for example SS-628-ZZ Print it the same orientation it will sit on the frame,…
Schleifspindel / grinding spindle Schleifspindel in den Größe: 30mm x 50mm 50mm x 50mm 80mm x 50mm Bohrung für Gewindestange: bei 30mm -> 6mm bei 50mm -> 6mm bei 80mm -> 8mm Grinding spindle in the size: 30mm x 50mm 50mm x 50mm 80mm x…
This is an upgrade for the standard cooling fan included with the 500W Spindle commonly used on small DIY CNC milling machines. It prints easily and needs no supports. There is an open and a closed version, depending on personal…
Edit 01.08.2025: Zurzeit wird ein neues Zahnrad getestet, da anscheinend das aktuelle Zahnrad mit dem Zahnriemen zu stark abnutzt und die Riemenspannung zu hoch ist! Suche hierfür auch ein paar Leute die dies für mich testen! Um eine…
SUPER PINDA 1.5mm adjustment tool 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Only 10 minutes to print. No support needed. Keep in mind : Always recalibrate the Z-live after a Super…
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
I needed a way to mount the Stealthburner with an original Bondtech LGX to my CR10 S5. I found this Afterburner adapter on thingiverse and remixed it to fit my needs ( https://www.thingiverse.com/thing:4638150 ). The LGX adapter came from…
A friend needed an adapter to try out a 65mm spindle in the existing 69mm spindle mount on his small CNC router, so I drew one up and printed it. Prints upside-down on the flange so you don't need any support.
Update Feb 2026 : Multiple diameters of spindle have been added. All new models have the V2 prefix. New spindles are not compatible with the old V1 base and bolt. Details: This is a smaller yarn winder spool for a generic Amazon yarn…
These are small plates with indentations for your magic spindown dice. I made two plates, one for the regular spindowns and one for the newer big spindowns. Fast and easy to print and a nice gift for your friends. I added two dice per…
Designed this Shivling as per a request. Have uploaded the Shivling as a whole model and as divided into 3 parts. You can scale down as per your printer dimensions. Have mostly kept it as hollow to allow to instal LEDs and to save…
We had a difficult time getting the files to make a spare dust shoe, so we downloaded them from OnShape, resized them to the appropriate size (100%), and re-exported them in a ready-to-print size. They're easier to find, download, and 3D…
Dragon Burner remix for 8 mm diameter inductive probe, tighten the probe with M3 screw. OnShape: https://cad.onshape.com/documents/e60d6bbb7afa598d50a74769 Offsets (from OnShape): X: +31.300 mm Y: -17.418 mm
English: Should fit every locker. If not, you can easily adjust the hook with the f3d file. Deutsch: Sollte bei jeden Spind passen. Wenn nicht kannst du den Hacken mit der f3d Datei leicht anpassen.
This a super basic 4030 Desktop CNC Router Design for 65mm Spindles, eg a Makita Router or 1.5kW Air-cooled VFD unit. I'm publishing this due to a request, however it doesnt fully match my current machine spec, and may be incomplete in…
Hallo zusammen, hier teile ich euch meine Halterung für die Z-Achsen Spindel. Ich habe diese Halterung konstruiert, damit ich kein Wobble mehr in meinen gedruckten Teilen habe. Als Lager habe ich ein 608RS genommen. Welches einen…
I made this dust shoe after upgrading my Genmitsu CNC 3020 to use a Makita RT0701 trim router. I never really liked how the Genmitsu dust shoe bristles would get crushed and pusshed into the endmill during deep cuts so I decided to make…
Make sure you have the correct distance between the bed and the PINDA. Tool to use when adjusting. According to PRUSA KB distance should be between 0.8-1.0 mm. This tool measures 0.9. Follow the official Prusa guidelines and use this…
A replacement spindle for the yarn winder, it is 120 mm long (the original one is 82.5 mm long). Helps to wind larger balls, created to prevent the slipping of yarn when the ball gets too big. For SLA/resin printing : it can be printed…
I created a mount for the pinda probe to fit the Voron-style head as I didn't find a mount I liked. The provided gcode is for PETG, but the Voron team recommends it to be printed in something rated for higher temperatures. Brass inserts…
simple spindle for those of us still rockin CD's and DVD's.
Important! Before printing this, please check the spacing of your CNC X axis rods. I've added two test pieces to check the fit before printing. One for 68mm spacing and one for 72mm spacing. I didn't realise there were so many variations…
A large Spindown D20 (Icosahedron) to use in a game, or just for aesthetic purposes. Printing Tips - If you do not use the included G-code: Supports are necessary (but not for bridges) A high infill % will take a lot longer to print, but…
