667 modeli
Festool Abrasive holder with positioning aid - simplify your tool management Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, This is a compliant mechanism that can be used for percise positioning in two directions. The dimensions of the Compliant XY-Positioning Device are approx. 69 x 61 x 8 mm The range of motion in X is approx. 1 mm; the range of…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
ДЕРЖАТЕЛЬ ДУШЕВОЙ ЛЕЙКИ В ВАННОЙ ИЛИ ДУШЕВОЙ. 2 ПОЛОЖЕНИЯ ЛЕЙКИ.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
D.R.O.P.P.E.R. Durable Rapid Object for Painless P.I.N.D.A. Easy Re-Positioning Simply drop your P.I.N.D.A. down onto this tool for the perfect (?) P.I.N.D.A. position. To be honest I don't know if it's the perfect P.I.N.D.A. position,…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Printed with variable layer height. Standard Parameters.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Wydruk około 7,95 €–9,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modified version of this : https://www.printables.com/model/70791-einsy-door-with-fan but with different fan location more centered on the stepper drivers side. This replaces the einsy door on an MK3S.
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Pin that makes the snap mechanism of the fire selelctor switch of the Cyma 125 (USP) possible. It is that thing that flew across your room, nowhere to be found, when you took out the fire selector unit out of…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
type of nomal position
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Fixture for milling flats on a backplate for a k11-100 chuck. Jig helps to position the backplate in the vise at to the corrrect angle. 2 x 2 flats are needed to hold the chuck in the vise or to mount it on a rotary table.
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A physical version of the “good fast cheap” Venn diagram This is a redesigned mechanism for K2 Tech Designs' Good Fast Cheap slider. This addition uses a whippletree/rocker bogie mechanism to let you toggle any two switches, but not all…
Whole piece has slightly more flexion in the pinky than the split up version. Either one will need supports. Peg was designed for printing the model at full size. Base is if… I dunno, you want to remix into a lamp or something.
Stand to reposition the original LCD display to the top base. Reduces the printer footprint and modifies the angle so it's easier to view and operate. Uses original mounting points of the screen too. Screen holds in place respecting…
I pretty much just took the model 660 uploaded, chopped it up, and put it back together so that the s-foils (wings) are in 'attack position', or the distinctive X shape that we all know and love from the movies. I would recommend printing…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
I made this to watch movies on my phone during air travel. I needed something that folds flat in my carry-on baggage. This phone stand / tablet stand is printed in place as a single fully-assembled part. It includes a snap-lock mechanism…
A pistachio bowl to sort the shells
This is a 6" corner brace (for clamping), aka right-angle clamp, aka positioning square. As requested, there are now four variations: A: Sharp corner — measurements on sides (inches & millimeters) right down to zero B: Corner nipped — for…
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
I was bored, so I played a little with the FRT that I recently got.
Composition guide to look through when framing photos
UPDATE 1: Pin improved for V1 - Try Pin V1. 2 FIXED if the nebula pad is to loose with Base V1 UPDATE 2: I built a new holder from scratch (Display Base V2 + Pin V2). In V2 I fixed the problems that were present with V1 such as the wrong…
This stand is designed to hold your laptop in 2 different positions and to keep the workplace tidy. Option 1 The laptop sits at a 25º angle raising the screen at eyesight. It also allows you to store stuff underneath (like a keyboard).…
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
This latch includes an internal spring that provides 2 clear positions: open or closed. Printed in PETG for added strength. --------------------------------------------------------------------------------------------------- Ce loquet…
Holds alignment stick at different angles. Held in place w/ standard golf tee into ground. Can be swiveled around. 0, 45, 47.5, 50, 52.5, 55, 57.5, 60, 62.5, 65 degrees Stick hole diameter is 8.5mm Tee hole diameter is 6.5mm Lightweight -…
The painted stones, especially those heavy ones are usually arc shaped and common plate stands have no chance to hold it in position. This is the reason i made this positionable plate stand. I printed it from PETG and PLA. Both materials…
This is a 3D modeled body cap for the Micro Four Thirds Platform. This design features a rotation stop so you cannot over turn the cap. There is also a position marker on the front of the lens cap, like the genuine body caps.
Model printed in PLA and PETG in Creality Print on the standard "Normal" profile. Layer height 0.2, nozzle 0.4, filling 15%. Brim and support disabled. Pins should be printed separately, Brim and support optional, but not suggested, with…
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
This nut positioner keeps flat square nuts (DIN 562) in their position, so they do not slide around in the Makerbeam XL profile. When adding brackets and other parts to your BeamCase, (or other projects using Makerbeam XL profiles)…
This is a simple and good looking adapter to rotate orginal filament spool holder. For assembly you will need: 2x M5 nuts 2x M5x20 screws (flat head recommended) 2x M5x12 screws CA glue to fix the nut inside the hexagonal hole
Print on its side, 3 perimeters 0.24mm or finer. Print solid.
Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…
Use this PIN with ' https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand ' for move stock LCD. The lock the screen with the new base.
UPDATE: I have replaced the profiles with ones containing four build plates. The following versions are included: V1.0 - classic version with feeder holders that fit snugly to the housing curves, PC4-M6 V1.1 - classic version with feeder…
These can be either a replacement or enhancement to the “L-shaped positioning piece” included with the XTool F1 laser. These L-pieces have a different hole location than the OEM L-shaped piece. To help out with “odd” things… *You only…
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
Composition guide to look through when framing photos
Please scroll down for English translation! Das Honeycomb an meinem Laser hat ein Außenmaß von 400x400mm. Dabei fallen jedoch auf jeder Achse 45mm für den Rahmen weg, sodaß ein Innenmaß von 355x355mm bleibt. Ich habe mein Honeycomb so…
I wanted the honeycomb to be consistently located for reliable repeated engraving. The xTool Honeycomb Riser by cbabbman fit into the 2 brackets I have made. https://www.printables.com/model/252052-xtool-honeycomb-riser Thank you…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
First, I needed to reposition the LCD on an Ender 3 V3 KE. The slots and posts are reversed from the SE (the slots on the KE are on the LCD) and I was unable to find an alternate LCD mount for the KE. TinkerCAD had a hard time with…
⇨ Click here for the standard version for the Core One (without L) Small bin for trash like purge lines - with positioning aid to prevent bed crashes. You can use the versions prepared for specific magnet sizes, or you can use the…
You ever had a problem that seatbelt is scratching your neck, or in case you have them going over your sensitive parts on the chest? This little thing will allow you to add a forth point of contact on your waist so that belt going over…
Simple Right angle clamp
It has come to my attention that if you have v-slot framing and not t-slot you might struggle getting anything smaller than MGN12 to sit nicely (mainly because the gap in the V-slot is over 9mm). Now I know many will say “Just buy T-slot…
Composition guide to look through when framing photos
This is our 3rd speaker design to date. We went way off-script with this loudspeaker, hoping to attract those with smaller build volumes and a desire for deep bass and excellent off-axis response. They pack the party animal of the FDM5's…
RIDGID 18V Drill Holder Upside-down Position Perfect wall mounted storage for almost any of your 18V RIDGID battery powered drills and drivers. This mount may fit other makes as well. Remixed - Removed excess holes from base plate, added…
This model is compatible with the lego system.
Developed in the summer of 2023, these 3D printed bookshelf speakers are our first attempt at properly meshing 3D printing and audio. We believe that we hit the mark! FDM5 Loudspeakers throw out an impressively wide soundstage and boast a…
Hello Everyone From the beginning of using HomePod Mini, I did not like its position because the screen is not visible from a greater distance. So I decided to design a stand for it so that it would be placed in a horizontal position. I…
i recomend to use resin or pla
I printed 3 walls, 5% infill, and slim tree supports and ended up right around 80g filament.
2nd Update 2025 March ATTENTION: New Insights tell, that Sculpfun FRAMES also might differ . ==> Before Printing, please initially check size of LASER frame My calculations base on the FRAME Size of my Sculpfun Laser. Measurement from the…
Remix of https://www.printables.com/model/205599-itty-bitty-fidget/files with 3 positions using 6x3 mm magnets
This is a positioner for the IWISS SN-2549 crimp tool for Molex SL contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut. Replace the existing screw with the new screw while the jaws are closed to…
Update: I forgot that the Ender 3 KE has a different spool stand, with an additional part that makes it incompatible with my model. As such, I've updated my model to support the KE stand. Please let me know if it's still incompatible, in…
This phone stand has 2 moving arms with pads that adusts to the size of the phone. The parts are quite small and have to be printed in the right orientation (see the picture) in order to have a good fit. The parts are glued together with…
This is a positioning jig for easily aligning and attaching PEI steel sheets to the bed with Voron v0.1. It prevents frustrating PEI sheets from sticking to magnets in unintended positions. Use ABS or a material with a higher heat…
Double sided phone holder with two different angled supports. Hole and support cutout for charging cable. Can be printed without supports.
I have acquired many Wiha precision (261 series) screwdrivers over time, usually in 8 piece sets. Wiha provides a bench top stand with the 50+ piece sets and I wanted something similar rather than continuing to use the multiple green…
I made this clip to give you roughly a 25mm starting gap for you filament when using the 3D Chameleon. This is just easier to use to line up the filament instead of tape. I use PETG to print this because it's a little more flexible than…
Reduces the printer footprint and allows to move the printer closer to the wall on the right side.
All Modifications are done in bambuslicer 1.10 and are contained in the 3mf file. You can choose the text in the slicer: Right click on the text_shape objects and “edit text”. Once you have chosen your texts, you can either: Choose the…
A huge set of customizable Photography Composition Guides. Use the attached OpenScad script to create your own version or stack several guides together to combine their attributes!
Allows adjustment of X-axis endstop switch offset. I needed something like this since the stock bracket for the Sprite Extruder kit has a protrusion that creates an ~5mm offset/print area loss from stock. I didn't care to modify that…
This is a 3D printable cabinet for an 8" powered subwoofer by Deposition Sound LLC. If you have a medium/small living space that is in desperate need of thick, juicy, and fast bass, these are just for you! They have been carefully tuned…
Resize in slicer. I use 150x150x20
Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the…
This is a remix of Voron v0.1 PEI Sheet positioning jig. I designed the curvature, which facilitates and self-positioning the inserted PEI sheet. In addition, I converted it to a CAD model for later easy editing.
This is a four-position screwdriver holder I designed for the French Cleat system on my workbench. My cleats are cut on 45° angles and are 19mm x 19mm. The screwdriver shaft holes on this design are 6.5mm diameter. I realize French cleat…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
This is a functional stand designed to help position and support puppy ears during the early stages of growth, especially for breeds where ear shape is important (e.g., Dobermans, German Shepherds, Great Danes). 🔧 Designed in Fusion 360 🦴…
When using the exposure test of the Elegoo Saturn 4 Ultra 16K, the individual test objects must not overlap the boundaries of the 4, 6 or 8 segments under any circumstances. To ensure this, especially with larger test objects (e.g. the…
This is a standard Fibonacci spiral composition guide which can be taken everywhere disguised as a bookmark in your sketch pad, or tucked into your camera bag. Mine is printed in PETG to give it a little flexibility and therefore make it…
Cam reposition with swivel and tilt for fully custom POV. Takes 3x M3x 4.5mm OD x 5mm L heat set inserts and 4x M3x10ish screws (tbh didn't measure which ones I used) Credit to @Henryk for the swivel idea.
29.Aug. 2023 Shape has been changed to improve installation stability. This is a positioning jig for easily aligning and attaching PEI steel sheets to the bed with Voron v2.4 It prevents frustrating PEI sheets from sticking to magnets in…
Stand for Oral-B electric toothbrush. Pegs for 3 toothbrushes and space for the charging dock with cutout for the wire. This is a quck and dirty remix of the original stand with 4 pegs. I only needed 3. I tried to do the changes in…
My dear friends, after the impressive pole and win by Max Verstappen of the F1 Dutch GP I decided to create his Pole Position Award . I think it looks really good and I decided to share the gcode here exclusively on PrusaPrinters. So if…
Ender 3 V3 SE LCD reposition stand variant. Reliable holder, verified installation location, does not interfere with calibration, is equidistant from the hot table and the edge of the case. I suggest you familiarize yourself with the rest…
This is set for “spin to pick your Easter egg color prize” I added pictures of other wheel legends for you to get ideas for your wheel of fun Filament piece to retain wheel on shaft Fusion 360 file for wheel inserts
This is a remix of Owen TF's “Fidget Switch” : https://www.printables.com/model/764872-fidget-switch/comments . I wanted a small, simple switch that I could use as a reminder tool that I would carry with me in the coin pocket of my jeans.…
Fixed configuration nozzle storage box with space for 3 variations on each size (brass, nickel-plated copper & hardened) for each of the common E3D V6-style nozzle sizes (0.15, 0.20, 0.25, 0.30, 0.40, 0.60, 0.80 & 1.00mm). Print…
Honeycomb Storage Wall Inserts; Slightly more refined versions of M4 and Multipos with alternate tab versions. 6 tabs for max holding power, 3 tabs for moderate holding power and 0 tabs for primarily test location finding before locking…
THIS MODEL IS NOW DEPRECATED (I mean it still works great I just updated): https://www.printables.com/model/1089271-svo8-camera-reposition-adjustable Never understood why Sovol hung the camera upside down like that, the view was just…
You need one bearing 8mm/22mm Print instructions mat. PET-G layer 0,2 nozzle 0,4
With the sliding guide you will be able to position your products fast and easy. Ideal for batch productions. Additional hardware needed: 2x M3 bolts (minimum length 5mm, max 10mm) for securing the slider guide to the plate. 1x M3 nuts…
it will fit right inside the top of that clear bin im planning on filling up with other knives.(see picture) thats why i made it this particular size. let cool before debedding to keep flat Super glue the joints. tape in place to dry. bin…
Inspired by the "Ultimate Extruder" I created this modification which includes all original parts. The position of the nozzle as well as the leveling sensor remain exactly the same, even identical in Z to the tenth. So you don't have to…
Gridfinify - 90 Degree Positioning Squares Right Angle Clamps Woodworking Carpenter Tool Holds 4 x Positioning squares and additional storage in the center
A positioning tool to align objects on the plate. Use M3 bolts for securing the tool. Available in 3D (stl) and 2D (svg) This product can be used in combination with:…
French Cleat Sandpaper Storage for 5inch random orbit sanders with dividers and positioner for quickly mounting sandpaper onto the sander base. F3D file is included and fully parametric. 3/4inch french cleat attaches to the main body with…
Includes a little space for you to add a card with details, a name, ar date… whatever
The original design is awesome & I love the way it looks & works, but some spools are wound too loose, so added a guide. Guide was borrowed from https://www.printables.com/model/115109-filament-guide designed by Matt Boyer, & fused…
A friend of mine wanted to build his own base plate for the ACMER P2 laser engraver. I designed these positioners which allow a separation of base plate and laser engraver for better storage and flexible use. The positioners allow the…
John's printbed mount is great, except that the screw hole isn't aligned correctly with the bed's bottom-right corner. I only included the modified bed mount and the original camera housing. For the ribbon chains and full instructions,…
