468 modeli
Print in PETG. This is intended for range use. I would not trust my mags with it in the field. It's made for printing standing. I would recommend three or four perimeters. For the retention latch you should use supports, but I find it…
Protective cover for child's pouch Prevents the pouch from getting squeezed, protects baby from getting dirty and ensures that all snack contents end up in baby's tummy - Easy to grip - especially useful on the go - designed to ensure…
The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…
Snus Pouch Daily Organizer Insert Take control of your daily snus intake with this simple and effective insert designed to fit into your snus container. This organizer helps you manage your consumption by neatly dividing your snus into 10…
If you happen to have the same bike bag that I have ( Brand: “Wild Man”, model: V31 ) then you might have run into the same issues that I did. The mounting plate is fairly thin and weak, and can crack due to impact. This is a replacement…
Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…
Cat food pouches can be frustratingly hard to empty. This cute squeezer is here to save the day and do so in style! Made for: Felix brand pouches Slot dimensions: 95 mm x 2.2 mm Print time: ~1 hour Printer used: Creality Ender 3 v2…
Tired of using the disposable can you purchase you Nicotine or tobacco products in? Want to use something more permanent and stylish, look no further!! This design has a compartment for fresh Pouches and a small compartment for used ones.…
Print in PETG to be easily washable. v2 update: thickened the handles so it's more rigid when printing.
AR15 magazine pouch attached to a belt. The pouches are connected from three elements with an elastic cord with a diameter of 3 mm. The belt holder is composed of two parts fastened with 4 M3 screws, 16 mm long. The chargers are equipped…
My first attempt at making a magazine pouch was alright, but I was not very pleased with the outcome. This is why I now present to you this Taco Pouch. It is designed to hold Glock magazines, though I think it would work with similar…
Race Mag Pouch for 223 556 Pmags for ELS mounting system Update 11192023 Added Strengthening Ribs to the mounting side of the pouch Reduced mounting height by 1mm Made insert holes 0.2mm smaller Update 01152023 Got some feedback about the…
This organizer shape was designed so the pouch would easily slide in each niche while spreading the contents inside evenly to save space. All the pouches can be seen and easily taken from any angle. Prints with no supports :) As usual,…
Cat Food Dispenser for Wet Food Pouches Overview Designed for wet food pouches (~9x14cm) Two sizes: Tight fit and loose fit Features Can be printed without support Compatible with popular wet food brands (e.g. Whiskas) Printing Suitable…
Back in the late 1970s and early 1980s, My grandfather carried a small flexible plastic pouch in his pocket to hold his change to keep it from rattling around. I was experimenting with TPU the other day (and still not good at using it)…
I just added an MP5 to my airsoft collection, but all my gear is made to carry STANAG (M16/M4) magazines. Two of the slimmer MP5 mags fit in a STANAG pouch together, but take one out and the other will flop in the pouch freely. That's why…
Here is my take on a design for a Zyn/Nicotine pouch container. Simple, yet elegant. This design includes a built-in divider for used pouch disposal or keeping a second flavor. Textured ridges around the can/lid provide a nice feel in the…
Ridged pouch for STANAG magazines. This uses 1" elastic. The pistol pouch tested WE stingle stack 1911 magazine and ICS BLE magazine.
I found a mag pouch holster thing I liked and redesigned it from scratch in Fusion 360. I wanted to be able to print it assembled so you would not need screws. I made two versions one clip on one belt-fed on Monday I'm getting my blue…
This cat food squeezer makes pouch dispensing easier and cleaner. It features an open edge for half-portion servings and a larger size for improved grip and comfort. I’ve tested it using PETG material, which is ideal for easy cleaning and…
Soft cat food is sold in many places (Europe) in small soft squeezable pouches and just like toothpaste I needed some help it getting out that last little bit! I tweaked an toothpaste holder to a somewhat larger size.
I modified the mounting plate of the Double Stack Race Mag Pouch by CadeyzDad (https://www.printables.com/pl/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig-). Instead of the ELS mount used in the original it can be…
Please print the fitment file first to see how much tolerance your printer needs to get a good friction fit. Then proceed to print the model accordingly. Print it with the mouth side on the print bed, recommend 4 walls with a 0.4mm nozzle…
This is the SpeedSloth Mag pouch for Half Dart Mags. Attaches to Molle and Micro-Pals with Zip Ties. Update 10/30 - Added 3C - Rear Plate - Double Molle - Ziptie for Double Molle straps like on the SCRD Belt.
I am fan of airsoft, military, cameras and photography and I like a usefull gadges, so I decided to add my model Universal Molle Pouch V1.1 (UMP-1.1) to everone, who need a universal pouch to Your stuff. UMP V1.1 fits to Molle web. To…
Holds on magazine locking protrusion. Sloped inside to have some pressure. Hole at the bottom to lock it in the pouch trough the drain hole. Update: Added retention washer to put on from the bottom to hold on the pouch more securely.
If you need a size that I dont have, just let me know and I'll get to it as soon as I can!! Cant adjustable from 0 to 70° You do not have to take this apart to adjust the cant. Loosen the arc screw and pivot screw (pivot screw is behind…
This model is compatible with the lego system.
Hey everyone, thanks for checking out my design! I set out to create a robust and rugged designed M4 mag pouch after failing to find one to my liking that was printable. After trying several production pouches, I liked the Gcode mag pouch…
These are very simple belt clips to hold molle pouches like this . They're pretty sturdy but how much weight they can hold will depend on how sturdy your belt or pants waistline is. Update - 20/11/2024: Added a slim version Print in…
I wanted to be able to reuse one of my Guga Ribas rigs when I take the MKIV to the range. So I made a retention-adjustable magpouch for the magazines, and figured while I was at it I could make some alternative attachment systems so it…
Glock mag pouch & belt mount for IPSC belt
New version, made entirely from scratch. Please post a make if you like it :) I needed something to hold my higher capacity BX-25 magazines. After trying others, and adapting other designs, and not beeing satisfied, I deceided to make my…
This is the improved version of the Fish Pouch. Some of the most notable changes include a new tail design and the inclusion of a lid. The new tail design is easier to be printed out of TPU. The lid can just be printed out of PLA and…
A magpouch for AR-15 magazines to be used with my Moonbeam Mounting System! Attach to a belt, or quickly swap it over to another picatinny rail capable mounting spot! I personally keep mine on a wall mount made with my MMS collection.…
Clip on OWB Mag Pouch for SW Equalizer and other 9 double stack Shield models. The modeled magazine body dimensions for this one is 20.1mm x 32mm. 10 rd mag shown in picture For this mag pouch i purchased the belt clip, MRD, retention…
The MMS Stacked AR-15 Double Magpouch! Is the single magpouch just not enough, or you want to carry more mags on your belt? Here you are! Holds 2 AR-15 magazines in one module! Use with the MMS Heavy Belt Module and other MMS mounts for…
Print in place model, fits into a belt.
The 1911 Magpouch for the MMS Collection is here! A slightly thin, lower profile 1911 Magpouch to be utilized with the Moonbeam Mounting System Collection or your other picatinny rails if you're creative enough! Grab an MMS Belt Module…
If you want to be able to hand your kid one of those squeezy pouches full of baby food without them causing an explosion put it in this protective cover. The neck of the pouch snaps into place and holds on securely. Action video:…
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
BOM: Printed with ROSA3D Starter PLA Red Stop wasting expensive wet pet food or thick sauces! This oversized pouch squeezer is designed specifically to handle large, wide sachets that standard toothpaste squeezers simply cannot fit. With…
Just a simple slingshot Category: Gadgets
Was going to leave this off the full suit as I assume people would do a leather or foam model to go with there wearable suit, but after a couple of requests here it is, Cheers Jace Print instructions Category: 3D Printing
ODST SOCOM pistol holster ODST SOCOM Mag pouch ODST SMG Mag pouch scaled for the odst/80% scaled version of the pistol
This model was created for the most popual standard sized pouches (85g), it can hold up to 32 of them. The model is 179mm x 183mm so i recommend at least a 200x200 bed size. Its optimized for a 0.4mm nozzle. For as big as it looks it's…
A remix of a remix, handle design was from anderfrank that I modified to be a bit stronger and without the need for supports. Original pouch protector design created by GangStead Print settings: Perimeters: 8 for a strong uniform print…
This simple design can be used to hang various types of food pouches, clearing space on the shelf for everything else. Print and hang multiple side by side to organise different flavors and types of pouches Dimensions: 31 x 45 x 243 mm…
This pouch fits in with the system here: https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig created by @CadeyzDad You must download the other parts of this system from the original page above for it…
Double mag pouch for Canik TP9 SFX pistols designed to use Safariland ELS mount. I believe this will fit all TP9 Magazines There is O-Rings between the plastic to hold tension on the retention screws. Hardware needed (2) M5x20 screws (2)…
This is a stencils that makes it easier to cut out the pouches for a slingshot. They are modelled after these instructions on YouTube by 1611torsten : How to make the fastest slingshot bands; extreme speed PART 1 . They are customizable -…
I made this procedural mag pouch insert to improve the grip of my aliexpress fabric pouches. The result is a strong grip and the magazine won't fall even if you shake it. I'm pretty happy with the result. It has a hole for fitting hi capa…
It gives you a better grip to pull the bungee cord off the magazine. should work with any mag pouch that uses bungee cord keepers. I printed it with fuzzy skin in PrusaSlicer to give some texture to it to help aid with grip.
IWB/AIWB mag pouch. Uses original clip. Allows carry of double stack 9mm magazines(tested with glock and HK P30/VP9 steel magazines) nose forward inside the waist band, or perhaps outside the waistband if you're left handed. Two different…
Fits common P-Mag AR / 5.56 / .223 magazines and who knows what else. These can attach to a belt, screw to a wall or cabinet, belt attachments, paddles and misc. My modern P-mag's fit “just right” and the last 5mm insert locks them in. My…
Have you needed to clean your eyeglasses but cant remember where the cleaning cloth is? stop using you shirt!! Now you can take your cleaning cloth with you easily and in a compact way. All the time! Just print it, add it to your keys and…
More support for a better print. I also made the slit in the front smaller, which lets the two halves somewhat fuse together, which helps support the model mid-print.
Rugged Molle Admin Case/Pouch Horizontal/Vertical It's hard to find a nice rugged admin pouch so I decided to design my own. Hardware: 1. 6 X M5 Screws and Bolts 2. 4-8 X M3 Screws and Bolts (optional washers) 3. 2-4 X Velcro strips…
I designed it for my dogs, as the pouch is hard to squeeze completely with hands only. After several iterations the tool is quite convenient and used daily in my household. The perforated structure ensures both proper stiffness and strain…
Version 2 of my inserts for Slay the Spire standard edition! The main purpose of these inserts is to allow you to store the playmats in the standard edition box along with the rest of the game pieces. This version also offers the…
A compact 74 x 23 mm snus/ZYN-style container with a main bottom compartment, a top disposal compartment, and a separate disposal lid. The model is designed to be simple to print, assemble, and use. No supports or brim are required under…
Remix adds detents for the 10 round Pmag. Belt clip was shortened to work with a 1.5" belt. Print in the default orientation, use organic or tree supports. Highly recommend 3 to 5 walls depending on your nozzle size.
Based on pose of Z. Tsereteli's ballerina statue. I printed the supported model and uploaded a make. Print went well, support removal was easy. It really is amazing what you can 3D print these days.
Designed to help my toddler get all the applesauce out of the bottom of applesauce pouches. Just insert the bottom of the pouch in the top of the device once it has been opened and continue to push/pull it through as more is consumed.…
Do you hate it when manufacturers of pet food make pouches that do not stand on their own? You can use this holder to keep your half used food pouch from falling over in the fridge. Printed on my Prusa Mini+ with Prusament Galaxy Black…
Short AR Mag Pouch V1.1 (REMIX) by Qwerm A remix of FecalDisco's "3D printable molle universal rifle magazine pouch" that is shorter, allowing it to hold 10 and 20rnd AR15 magazines. The MOLLE attachment was also replaced by a belt hook…
This is a modified MRD that uses an M6 nut to keep from stripping out when using materials like ABS. MRDv2 uses a standard M6 nut. MRDv3 is designed for a nylon locking nut. Measurements work for the Hillman brand nuts carried by Lowes.…
Allows you to use the pistol mag pouches you already have for Ruger MK magazines. I modeled this off the size of a Glock mag to fit into my esstac pouches. So should fit any double stack pistol mag pouch just fine. The slots on the sides…
This is a remix I made from a taller pouch holder. I made it slightly shorter and added pouch grips to keep the pouch from falling out. It printed well with petg and I'm impressed with the results. I added both models to this thing, no…
As recommended in the main model, I recommend printing with 3 walls and 25% infill.
Stackable cat and dog food pouch dispenser, each section can hold up to 12 (85g) pouches. For pouches with size up to 150x100 mm (100g), tested with 85g pouches. Printed with PLA 0.4mm nozzle 0.32 layer height 2 perimeters 5% infill (used…
LAST UPDATE 08 SEPTEMBER 2026 - 4 hooks tag library _______________________________________________________________________ MOLLE Pouch ID Tags – Labels, Pictograms & Blood Types A large and growing collection of 3D-printable MOLLE pouch…
A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag. It can be mounted on MOLLE webbing or on a belt loop. TPU bands provide tension to keep the magazine securely in place. Primarily based on a Gen III FastMag…
Our cat loves Felix Tasty Shreds, but everyone who buys them knows how hard it is to get all the food out. We usually need to use a spoon. I made a simple squeezer / extruder that lets you get every bit of food out very easily and…
A taco style AR15 mag pouch. Utilizes a shock cord for retention. It can be mounted to a belt or MOLLE webbing, as well as being attached together in a double mag configuration. The MOLLE strap is designed for traditional webbing and may…
If you like the original black_bunny's pouch for glock, but it was too loose for your gun, despair not. This version will accomodate snuggly your P-10 magazines, regardless of the size of your gun (Compact, Full, Subcompact). The model is…
Bring a smile to your workspace or shelf with this adorable 3D-printed kangaroo! Perfect as a whimsical desk companion, charming shelf decor, or even a mini storage bowl for small items like candy, coins, or screws – this friendly…
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
🐾 Pet Food Pouch Dispenser – Vertical, Space-Saving & Easy to Use! Store your wet dog or cat food sachets neatly in this compact vertical dispenser with a convenient bottom slot for one-handed access. Designed with cute paw-shaped cutouts…
MagPouch insert fo 3 cmya, or similar AEP magazines, long and short type. Uses M6 melting nut to fix it on your pouch. -Have Fun! update 05/05/2024: added two new models to use it without a melting nut: you can use now a nut (ISO 4032)…
This is intended for range use. I would not trust my mags with it in the field. Print standing up with no supports. Material and print settings depending on how robust you want it. Fasten pieces with 3mm shock cord. There is one back…
Carrying things around in a plain bag or case is boring and lacks style! Introducing the Fish Pouch, a small container made out of 90A TPU that looks like a fish. Simply squeeze the top and bottom of the mouth to open it and put items…
This ambidextrous pouch allows the pistol operator to store two magazines of cartridges in his nondominant pants pocket. It holds the mags upright, minimizes rattle, and keeps pocket lint out, in contrast to carrying magazines in a pocket…
Tired of wasting pet food stuck at the bottom of the pouch? 🐶🐱 This 3D printed pet food squeezer gets every last drop out — fast, clean, and mess-free! Perfect for dog and cat owners who hate wasting food or getting it all over their…
This is a belt pouch, or molle adaptable, for CZ .22LR rifle 10 round magazines. It is also useful as a small tool or knife holder. The V3 file is specifically for TPU. It has a thickened pouch lip to stiffen a bit. I lean towards the TPU…
This pouch fits in with the system here: https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig created by @CadeyzDad You must download the other parts of this system from the original page above for it…
This model is compatible with the lego system.
there are are a view models. ones with a removable spoon and a solid model. incase you like to print less separate parts or don't want to use a real metal ring en pin to complete it. Personally I recommend to use the ones with the…
Keep your cat food pouches neatly organized and always at hand with this practical dispenser. The stand is designed specifically for 85g pouches (we have 100g and it is possible) and has two separate compartments. Each compartment can…
Foldable storage pouch for hygiene masks. Quick and easy to use. Faltbares Aufbewahrungsetui für Hygiene-Masken. Schnelle und einfache Handhabung. Print instructions Prusa i3 MK3s MMU2s Material: PLA or PETG Layer height: 0.1 mm First…
This Pouch hook was originally designed for a Helio A6 wheelchair from Motion Composites, but it may fit others (or be easily modified for them); STEP files have been included to facilitate customization. The Helio A6 has 1” (25.4mm)…
Works well. Threads are tight and will need to be worked in for best fit. Cap is swappable by inserting the eraser end of a standard pencil to remove the cap and press fit a new cap. USA flag and standard re-mixable cap included in the…
Keep your wet cat food pouches organized and easy to reach with this dispenser. It holds up to 12 standard-sized pouches and uses a simple gravity-fed design, so the next pouch is always ready to grab. A removable lid makes refilling…
Remix of Gangstead's squeeze food pouch protector. I imported the file into Tinkercad and added some handles at the request of my Wife. Category: Kitchen & Dining Remixed from: https://www.thingiverse.com/thing:3222280
This is my design of a shepherd pouch. Normally they are made from leather but TPU is extremly strong and i think it will do the job. If David had a 3d printer, he definitely print this…….and a benchy :-)
Food pouches are always makes mess in fridge shelves. Half-eaten food pouches always tend to fall somewhere. I thought i can make special shelf for them. So, here it is. - Food pouches hanger/holder for fridge. Print tips: Any plastic…
Added a slit so that the carrier can hold empty mags without the plunger stopping the insertion of The magazine. I've printed this at 15% infill and used it on a few range trips and it works Fine, I might look into making a remix for it…
These were designed specifically for the Mark IV 22/45 mags. They may fit other mags unchanged, or with some scaling, or with small mods. Fusion 360 file included. Mags fit bullets inward or out. Optional magnet to temporarily join…
This magazine pouch insert is used to convert soft M4 or AR magazine pouches into double MP7 magazine pouches. The design allows the magazines to be drawn quickly and, above all, stowed away again quickly and easily. The insert is…
