Wyniki wyszukiwania: quik

Sortowanie

45 modeli

P
PrintablesJaimesTheGinge

Milwaukee Quik Lok Hook

This hanger is based off the original hook/hanger that comes with the Milwaukee Quik Lok accessories. I was one short so I measured it up and voila! Printed in PET-G 20% infill 3 walls supports for the key way/hole and the top of the hook

Pobrania
776
Polubienia
104
Ocena
4,5
P
PrintablesAdam Knepper

Milwaukee Quik-Lok Attachment Wall Hanger

This mount holds any of the Milwaukee Quik-Lok attachments securely to the wall using a snap cradle design. Simply press the shaft into the cradle and it will snap into place snugly and safely. This may work for other brands of similar…

Pobrania
557
Polubienia
67
Ocena
5
P
PrintablesCal_9000

Wall mount Milwaukee QUIK-LOK Hanger

Allows you to wall mount your Milwaukee QUIK-LOK accessories easily. Tested with the trimmer, edger, & hedge trimmers. Not sure how it will handle some of the heavier tools like the power brooms. The V2 holder is a bit thicker because I…

Pobrania
450
Polubienia
59
Ocena
5
P
Printablestsylatac

Milwaukee Quik-loc Attachment Hanger

Printed in both PLA and PETG and works fine. Included STL and STP files. Doesn't really need to be printed with supports but I added them for cleaner lines

Pobrania
200
Polubienia
18
Ocena
5
P
PrintablesPetclaud

Wall hanger / clamp for Milwaukee QUIK-LOK (FOPH) tool and attachements

Inspired by Adam Knepper's design, I have designed this from scratch. All sizes in mm, except for the clamp which is ~1". Added diagonal supports making this version significantly stronger. Also reduced the diameter of the clamp slightly…

Pobrania
126
Polubienia
10
Ocena
5
P
PrintablesArek Suchy

Attachment to Fiskars Quikfit handle

Handle for Fiskars replaceable tools. I printed from ASA in two parts (A and B) and glued. SW x2 nozzle 0.4 layer 0.2. You can print with Petg, it should also withstand. A slight cut can be needed on the handle. Fastening to the nit.

Pobrania
123
Polubienia
15
Ocena
5
P
PrintablesCaptain Hammer

Fiskars quikfit adapter for DIY tools

Printed with Prusament ASA, 5 perimeters (fully filled walls), adaptive layer height. Wall thickness is 3.5 mm. Bottom plate geometry is shown in a picture. Tested with telescopic handle L.

Pobrania
111
Polubienia
11
Ocena
5
P
PrintablesHacksolot

Gridfinity Chipquik Flux Holder

1x1 Gridfinity Block to hold a thing of flux. Pretty self explanatory Print with supports if you don't want to deal with cleaning up the holes. 2nd photo shows how deep it sits inside the block, proving the need for the height

Pobrania
84
Polubienia
13
Ocena
5
P
PrintablesEccentriclulz

Thumb Screw for Flycore Quik Blaster

Thumb screw remixed to work with the Quik Blaster's extended battery tray by OldFusionDesigns. Requires 1 (EA) M3 bolt and 1 (EA) nylon lock nut. Print orientation as imported. Enable support touching build plate (optional).

Pobrania
83
Polubienia
13
Ocena
0
P
Printablesandrepadua

Gridfinity Flux Chipquik bin

Gridfinity bin for a Chipquik SMD29130cc flux syringe and up to four needles (which i lost, but the holes are there and i hope they fit).

Pobrania
82
Polubienia
13
Ocena
0
P
PrintablesGrendziol

Fiskars QuikFit hanger

Fiskars QuikFit hanger

Pobrania
81
Polubienia
9
Ocena
5
P
PrintablesJohn Doe

Flux Paste Syringe Cap (Chipquik SMD291 with Needle)

Simple cap designed specifically for the Chipquik SMD291 with needle (best flux ever)

Pobrania
70
Polubienia
6
Ocena
0

QuikSilver Logo Plate

Red and White QuikSilver Logo

Pobrania
67
Polubienia
9
Ocena
0
P
PrintablesKatherine Dubé

Needle Caps for ChipQuik 5cc & 10cc Syringes

@AcEKrystal designed a really great needle cap for dispensing syringes, but it didn’t fit the ChipQuik flux syringes I use for soldering. After some quick resizing, I created updated dimensions for both 5cc and 10cc syringes. Depending on…

Pobrania
53
Polubienia
12
Ocena
4
P
PrintablesJamie B.

Gridfinity Chipquik Solder Flux Holder

A 1x1 Gridfinity block to hold a plastic syringe (0.35 oz, 10 g/cc) of Chipquik solder flux. Angled for easier access but still fits within the single 1x1 block footprint Magnet recesses on the bottom corners for stability Drain hole so…

Pobrania
50
Polubienia
6
Ocena
5
P
PrintablesWill Miller

Multiboard compatible hanger for Milwaukee Quik Lok 2528-20

This is a multiboard compatible hanger that I created from 3d scan I made of my Milwaukee Quik Lok 2528-20 power head. Print as oriented Print with tree supports for back multiboard attachments that are included in the file 15% infill

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesMartin_J.

Fiskars Quikfit broken lock - no glue repair

Fiskars Quikfit broken lock - no glue repair / náhrada zlomeného zámku Quikfit bez lepení - print in PETG or any a little bid flexible material / tisknout v PETG (3 perimeters, no infill) - clean the hole from any left broken edges with…

Pobrania
43
Polubienia
10
Ocena
5
P
PrintablesDIYgrandpa

CRP Bakkie - QuikRead go CRP POK cuvette car medical transport holder Aidian

As the GP's in a local practice were struggling to transport all relevant bits for a POK CRP test when going on house calls (keeping reagent tube upright during the car ride), I designed this cup that fits most car cupholders. They now…

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesIvan Lipcan

Milwaukee Quik LOK - Trimmer and Edger

I have made a simple wall mount for Milwaukee QUIK-LOK power head, Edger and Trimmer. You have to mount the Tops first and then align the bottoms before screwing them into your preferred walls. I have placed a small slit in the models so,…

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesMate Sinku

TP holder bottom smacker Quik reload

toiletpaper hit new one in from the bottom to wipe'r own bottom, faster model, for times speed is necessary. have a pleasant wipe.

Pobrania
25
Polubienia
2
Ocena
0
P
Printablesc0nsumer

1UP USA Quik Rack Add-On Hole Plugs

These are replacement plugs for the threaded add-on holes in the 1UP USA Quik Rack . These were generated using the Plug that hole OpenSCAD file and tested to fit. Printed in black ASA these have held up nicely in the sun all summer, or…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesRD Kidd

Rigel QuikFinder Mount with Strap Holes

Rigel Quikfinder is a popular telescope accessory. This version of the mounting plate (with two additional holes) allows you to use two bands of elastic, string or zip ties to temporarily mount the finder to the scope tube to find the…

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesTeraflop

Pampered Chef Quikut Paring Knife #1250 Sheath

A parametric sheath with parameters specific to the Pampered Chef Quikut Paring Knife #1250. These came with carboard sheaths which these replace. The parametric model can be adjusted if the blade fits too tight or loose based on your…

Pobrania
22
Polubienia
3
Ocena
5
P
Printableszebulon

OFD Quik Grip Tape template

no support needed, print any infill at least 2 walls. Grip tape used: https://amzn.to/4bNBoCW

Pobrania
22
Polubienia
0
Ocena
0
P
Printablesnekonomikon

Quiksilver Keychain

Quiksilver Keychain

Pobrania
21
Polubienia
1
Ocena
0
P
Printablesdav88

3 roll quik change toilet paper holder

holds 3 rolls of toilet paper and you can quick change the rolls . need to print 6 tabs to go into holder spots. make sure tabs are facing right way when you snap them into position on the frame. one end has a chamfer to signify that…

Pobrania
20
Polubienia
9
Ocena
0
P
PrintablesCaptainRV4

Rigel Quik Finder Dew Cover

I needed a cover over my Rigel Finder to prevent it from getting covered with dew. Works as I had hoped.

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesEleusisT

Rigel Quikfinder FastMagnetFix

Rigel Quikfinder FastMagnetFix Update History 1) Upgraded Quickfinder fix Change the fix to remove tilt of original version during usage, causing shift when trying to target. Use “Quickfinder fix v1.1” to fix this. I'll let the original…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesKyverik

Rigel QuikFinder Storage Case

Case for the Rigel QuikFinder. I didn't like the idea of just tossing it into my telescope bag unprotected. Printed in PETG at .2mm Uploaded in recommended print orientation.

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesAnže Kuret

Quikdraw carabiner lock

This device prevents clipping carabiner rotation and side. Be extremely careful when installing, because you need to clip carabiner to quick draw sling!! Based on 16mm Ocun quick draw sling. Print in TPU with 50%-80% infill. If you use…

Pobrania
13
Polubienia
0
Ocena
0
P
Printablestimmgleason

Quik-Lock Toilet Hinge Mounting Plate

There are several brands of toilet seat with fast release hinges (at least in the United States). I purchased several of these last year, and recently had one of the hinge mounts break. Being made of plastic that can happen. Could not…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesBootjevaarder

Nesquik / Coffee Scoop

For Nesquik or coffee. No support. Print with PLA or PETG - 0.16 mm layer height.

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesUdp53

Finder base for Rigel Quikfinder

Print in PETG with supports on, with the recessed socket side down on the build plate.

Pobrania
8
Polubienia
0
Ocena
0
P
Printableshiyaprinter

Quik-Tube 8" Form Bolt Holder

This fits over the top of a Quik-Tube 8" Form Tube to keep your bolt supported and center while your concrete cures. Fits standard 5/8" bolts (such as J and L bolts) Holder is 1/8" thick with additional 1/8" extensions on wings to keep it…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesАлина
Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesWill Miller

Milwaukee 2825-20 Quik-Lok Power Head

This is a 3d scan of the milwaukee 2825-20 quik-lok powerhead

Pobrania
5
Polubienia
4
Ocena
0
P
Printablesfoamo designs

OFD Quik 1.2 trigger group plate for Bolt OS

This piece allows the controller board of Bolt OS to sit next to a small trigger switch in the pocket in the front of the Quik. You still need to place a selector switch somewhere (in the back there is a good spot). Thus giving your Quik…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesUdp53

Rigel Quikfinder to PrimaLuceLab mounting plate

Attaches to PrimaLuceLab telescope rings, which have a pair of M6 threaded holes 55mm apart. Print in PETG with supports on, with the recessed socket side down on the build plate.

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesfoamo designs

OFD Quik 2.0 select fire and TDS related mods

For people who know the know, TDS 120 fps thanks to the bcar and select fire plates for Bolt OS.

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesOuliere

QUIKLOX phone stand

Jednoduchý nastaviteľný stojan telefónu pre adaptér QUIKLOX bez zámku. Použitá skrutka M5x20 DIN 933 Použitá matica M5 DIN 934

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesGonza Altant

Bowl bottom ring for Braun Multiquik attachment

This is the bottom ring for BRAUN Multiquick Food proc accessory MQ70 bowl. The original ring has stretched out and did not fit the bowl. The ring should be printed using a soft enough TPU/TPE rubber-like filament. I used BFGummy by…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesEHZ_115

M72 LAW Quik Primer

This addon allows for very quick reloads for M72 law 37mm projectiles. Connect your round to the primer holder via tape match or alike, and load into the primer holder w a 209 primer into the primer housing. After closing the latch, you…

Pobrania
3
Polubienia
2
Ocena
0
P
Printables

OFD Quik 1.2 trigger group plate for Bolt OS

This piece allows the controller board of Bolt OS to sit next to a small trigger switch in the pocket in the front of the Quik. You still need to place a selector switch somewhere (in the back there is a good spot). Thus giving your Quik…

P
Printables

Wall hanger / clamp for Milwaukee QUIK-LOK (FOPH) tool and attachements

Inspired by Adam Knepper's design, I have designed this from scratch. All sizes in mm, except for the clamp which is ~1". Added diagonal supports making this version significantly stronger. Also reduced the diameter of the clamp slightly…

P
Printables

A&A QuikClean Style 1 LOW FLOW Pop Up Pool Head Drill Jig (3 holes)

As with all tools, and especially ones that are printed, use this at your own risk. And if you do use it, please use with caution. Make sure your drill bits fit the guides (and that the guides are not worn out). And like Norm Abrams…