Wyniki wyszukiwania: ras

*~ Fully Printable ~* Butterfly Knife Balisong Design - CyberPunk Arasaka Remix Hardware Included In Print Files

Slightly Over Engineered Trash Bag Roll Holder

https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Vase Mode Trash Can

This model is solid and meant to be printed in “Vase Mode” or “Spiralize Outer Contour.” The model is 7in tall and 5.75in in diameter at the top. The Solidworks model is included if you would like to mess around with it. I recommend…

Raspberry Pi Zero frame for Einsy Rambo

For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print)

🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…

Slim Raspberry Pi Zero W Case

24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…

TrashiStand (Mechanical Keyboard Stand)

Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…

Trash bin (in vase mode)

With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm.

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Trash can

My first original 3D print model - A trash can to sit next to my printer and home my failed prints and filament stringies. Recommend printing at 150% scale.

Yggdrasil - World tree

Very simple and easily adjustable model of the Yggdrasil - a tree that grows through all nine worlds. Use a piece of double-sided tape to stick it onto a wall or other flat surface. The 3mf file included is for printing on the MK3S…

Raspberry PI Zero 2 (W) case

Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

MACH 1 Gen.1 - Raspberry Pi 5 Enclosure

The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…

Raspberry Pi Zero case

One more case for Raspberry Pi Zero. This is simple, compact and quite rigid. The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and…

Trash bin - box (in vase mode)

With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm. Lid can be found here:…

Case for Raspberry Pi 3b+ and SenseHat

Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…

Slim Raspberry Pi Zero W2 Snap-fit Case

Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…

Prusa Mini Raspberry Pi Camera Mount - by Clip-Fastening

The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…

Raspberry Pi 3B+ Case for Noctua 40x10

Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…

Raspberry Pi 3B+ Case (SnapTop) fits SenseHat

This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…

Raspberry Pi Zero 2 W frame for Einsy Rambo

A remix of Libang's Raspberry Pi Zero 2 W frame. https://www.prusaprinters.org/prints/85119-raspberry-pi-zero-2-w-frame-for-einsy-rambo Which is in turn a remix of the original Prusa Raspberry Pi Zero W frame.…

Raspberry Pi 5 Case (customisable)

This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…

Horizontal Chest Mount for Insta360 Cameras

Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…

Raspberry Pi 3b case

Raspberry Pi 3b case with holder for attaching to the frame of Original Prusa i3 MK3S+. The case has no screws and the case and the pcb inside is held together by placing it in the holder (the case can not be used on its own). The holder…

Raspberry Pi 3B+ Case HexVent

Vented Case, SnapTop... This case is built for a cooler CPU when active cooling is used... derived from the need to cool the Pi 4B, The case requires a fan for significant cooling. This case will not cool the sbc by itself, but the…

Raspberry Pi 3B Sleeve

This is a slim and configurable case for a Raspberry Pi 3B. It's not a case for systems that runs a heavy load for a long time, but my 3 Pis (pi-hole, openHAB, octoPring) do run with a temperature between 45°C and 55°C measured during…

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 for Octoprint and OctoDash Prusa for MK3s+

LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…

Retro Raspberry Pi 5 Case (snap fit)

A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…

Scooby Doo Mystery Machine : Crash Derby Cars

Scooby Doo Mystery Machine : Crash Derby Cars

Raspberry Pi Touch Display 2 Case

A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…

Raspberry pi zero webcam (HQ camera)

Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…

Prusa Mini - Raspberry Pi (3b) Case Mounting

In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket, I had to turn it upside down. Accordingly I renamed both parts. In order to guarantee nevertheless the ventilation, I…

USB to Dupont adapter for power supply 5V Arduino Raspberry Pi (Remix)

A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…

Cheech and Chong Love Machine : Crash Derby Cars

Cheech and Chong Love Machine : Crash Derby Cars Designed for use with the Crash Derby Cars Game Extra solo car included (remove from plate if not needed to save time) Print at .1 lh if you slice it yourself. Update (12/13/2025) : it…

Picnic Table Trash Bag Holder

Updated v15 includes a cap for attaching the clamp to glass tables and improved clamp. The screw and arm have stayed the same. Easily screw a pair of the Clamps to the end of a picnic table, slide in the brackets and attach your trash bag…

Flexi Parasaurolophus

Flexi Parasaurolophus Dimension de l'objet 128x64 mm épaisseur 12 mm Le Parasaurolophus était un des dinosaures ornithischiens au sous ordre des ornithopodes . Il était bipède et herbivore et vivait dans ce qui allait devenir le Midwest…

Raspberry Pi Zero/Zero2 frame for Einsy Rambo

This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…

Raspberry Pi Zero 2 W frame for Einsy Rambo V2

Remix of original frame for new Zero 2 W. New Zero 2 W have slightly different placed components. Updated model to V2. No need to use remix.

Butterfly Knife Balisong- CyberPunk Arasaka Remix Comb Version

CyberPunk Balisong (Comb) Arasaka logo + full printable hardware/ Perfect trainer knife

Raspberry Pi Zero 2 W frame for Einsy Rambo

This is a complete remodel to ensure it adequately supports the Raspberry Pi Zero 2 W, as the original model interferes with some resistors/diodes on the pi. This remodel also add a bit more clearance for the headers as I found that some…

Minimalistic Wall mount for Raspberry Pi 3b / 4 Armor Case

Simple wall mount for the RPi4 armor case. Uses very little filament and prints quickly. I used PETG but PLA should also work. Has a nice fit and you can easily slide your Pi in and out after installing it to your wall. I printed the…

Cat Grass - Growing Kit - Standard and Wide Mouth Canning Jar

This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…

Trash Walker

Hi! This a Remix of some parts used in my previous design Tow Walker . UPDATE 30/6/2018:: added 'long-bin.stl' . a 25mms taller bin suitable for tools or other stuff :D Useful as a penholder, desktop bin, planter or if you can print at a…

Stackable Shelf for Raspberry Pi Argon One V2 or Other uses

I needed a way to stack my Argon One V2 cases for Raspberry Pi 4s. I didn't really find anything that fitted my needs so decided to design one. This is my model that I've designed and made available. You can print as many of the…

Raspberry Pi 4 + Adafruit 3.5 tft case with fan

This is a case for the raspberry pi 4 with an adafruit 3.5 tft screen. In the bottom of the case, you can use a noctuna fan NF-A4x10 5V. I used a 5V fan, so I can use the voltage of the USB port. The bottom and top is clicking, no screws…

Müllbeutelrollenhalterung (Gelber Sack, k-classic Müllbeutel) - German Trash Bag Holder for Bio, Yellow, Black and Bathroom

This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…

Klinge Rasentrimmer Einhell, Grass Trimmer Blade

ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill

raspberry pi 3 case

Youtube Fusion 360 tutorial follow along. Tutorial called for the snap lid that you can see broke off on my print. Honestly the channeled lid fits tightly enough I removed the snap components in my file prior to uploading.

Wavy Square Trash Can

This trash can was made by using sine waves of varying frequencies to define the outside surface, giving it its rippled appearance. Slightly different sine waves were used on each side so that no two sides look the same. The ripples also…

Office Trash Can Basketball Hoop

We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…

Raspberry Pi 5 NVMe case (with Pimoroni NVMe Base board)

This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…

Kia EV6 Trash bin

To install the cover on the bin, first put the bigger tab into the hole, then push the smaller one in and it should go easily. Then just superglue the handle onto the cover.

LCD Cover for Raspberry PI4 w/ Hyperpixel Display

This is a remix of the LCD Covers for Raspberry PI4 w/ Hyperpixel display. After reading some reviews about the existing ones being too tight and possibly cracking the display, I designed this one so that RPI w/ Hyperpixel simply slips in…

Raspberry Pi 4 NAS open frame with two 2.5" drives

This is a open frame chassis for Raspberry Pi 4 with 2x 2.5" HDDs/SSDs. You can mount drives with a height of 15 mm. The holes in the Raspberry have a diameter of 2,7mm. Therefore i drilled them to 3mm. BOM: 4x 20mm M3 screw (pi mount) 4x…

Mini Tower Computer Case for the Raspberry Pi 5

Mini-Tower Computer Case for the Raspberry Pi 5 with acrylic windows and NVME daughter board. Any NVME HAT should do the trick but I used the slim ElectroCookie one for its minimalist style and quality. The case clips. You can add a M3…

Raspberry Pi Compute Module 4 IO Board Enclosure

I tried to print this once and it didn't quite fit. I gave the card some extra space and organized the code a bit. Hope You didn't try the last version. Parting the model and turning the lid over in PrusaSlicer works well for me.

White Board Marker & Eraser Holder

If you have a whiteboard these gadgets will be very useful. Holds 5 board markers and a board eraser. Can also be used separately. You can glue magnets at the back and install on a metal surface or use 3M double sided tape. Print…

Modular enclosure compatible w/ CM4-NANO-B Base Board for Raspberry Pi Compute Module 4

WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…

Filament Trash Can / Abfallbehälter

Einfacher, kleiner Behälter für Filamentabfälle, kann dank der Aussparung leicht unter die Tischkante gehalten werden. Platzsparend und immer zur Hand. Simple, small container for filament waste, can be easily held under the edge of the…

CORE One Purge/Trash Bin - Remix for 6x3mm magnets

This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets. There are two versions available: Holes for magnets are 3.0mm deep Holes for magnets are 3.2mm deep They exist because the first layer squish…

Raspberry Pi 3 toolless clip-on case Prusa i3 MK3/S

This is a modification of the Raspberry Pi sleeve case by Tobias Christensen. It has a clip attachment that allows you to attach it to a 30mm v-slot aluminum extrusion such as on the Prusa i3 MK3/S. Since it's a sleeve case and just…

Raspberry Pi 1/2/3/3b/4/4b/Zero/2/W Standoff for electronics placement

A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…

Herramienta Precisa para Proyectos de Carpintería Escuadras de Ensamble en X y T para Muebles de Melamina 16mm

[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…

Llaveros Letras

Llaveros letras iniciales en mayúscula, ideal para regalo

Cable fixing pin for grass (Compatible with STIHL iMOW)

Prints flat without any supports . You can use it to lay down the perimeter wire for your automatic lawn mower. You can also use it to lay down any cable you want this way. I used it for a 12V wiring for my garden lights. The grass will…

Raspberry Pi Camera Holder

A very simple and quick printing holder for Raspberry Pi camera v2.1 (or others). Screws on to standard camera mount.

Trash bin - box 2x (in vase mode)

With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm.

Cyberpunk 2077 — V’s Crash Pads

Damn, kid. Lucky you had these. Maybe stick to four wheels next time; leave the bikes to that partner o’ yours. These crash pads really do the job though, huh? Some of my patients rock just one or two, but four on each arm is the way to…

Home Assistant Raspberry case with Sonoff Zigbee Dongle

A simple case for a Raspberry Pi and the Sonoff ZBdongle-E, not ZBdongle-P! Pay attention, they are almost the same dimensions and look the same. I think all -E models have the label “Zigbee 2.0 USB Dongle Plus ” on them while the -P…

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

stable Diamant Edition Case/Box incl. Stand for Raspberry PI 3b with applied 3.5" LCD Display (plus option for fan or sensehat)

Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…

Addams Family Munster Coach : Crash Derby Cars

Addams Family Munster Coach : Crash Derby Cars All versions have an extra version of just the car included. Remove if not needed.

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Raspberry pi 3B+ case for 3030 beam (Octopi)

A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.). An optional cable guide for the pi-cam cable. No screws needed. Everything snaps together.. There are holes to attach the Raspberry to the bottom part using…

Raspberry Pi Pico Open Remote Control Walking Robot

I tried to make a robot that everyone can enjoy. 3D Data, How to Make, and Code are open to the public. You can put it together with parts that cost around 7000 Japanese yen (70 US dollars at ¥100/$, excluding PLA filament). The power…

Housing for the Raspberry Pi standard camera module v2.1 with integrated focus adjustment

The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks

JSN-SR04T ultrasonic sensor lid mount for IBC water tank

This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.

Raspberry Pi Pico Soldering Rack

In case you need to solder header pins to a new Raspberry Pi Pico, here is a handy rack to keep everything in place. Got inspired by this model: https://www.prusaprinters.org/prints/44141-arduino-nano-every-solder-holder

Cheap, minimalistic razor holder/ razor stand // günstiger, minimalistischer Mühle Rasierhobel Halter, Ständer

The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…

Prusa Mini Raspberry Pi Model 3 A+ & RPi 4 Mounted Case

I was looking for a simple solution to mount the RPi Model 3 A+ to my Prusa Mini but could not find any low profile solutions. So I made a quick modification to one and used the below parts: Parts Needed to Mount the case (2) M5 x 10mm…

L-mount for Reolink and TP-Link Tapo IP-cameras

Mount is compatible with Reolink E1, Reolink RLC-410W, and TP-Link Tapo C200/C210

Türgriff Draußen/ Terrassentür Griff / Balcony Door Handle / terrace door handle / Window Handle outside/ Door closer

Eine Halterung die an die Tür geschraubt werden kann um die Tür von außen entspannt zu zu ziehen.

Prusa MINI Raspberry Pi 3b+ Cover

Many thanks to Joe for the inital publishing of the case for the Pi3. The 3b plus have some parts at different places as well additional connectors. I updated the cover only. The buttom remain the same from Joe. It fits 100% and very…

Minecraft grass block dual color

Dual color version of Minecraft grass block. Fits nicely with ore blocks . I know the one green pixel in the left corner is missing, but otherwise it would not work. Made in onshape .

Raspberrpy Pi 3 Case - IKEA Enclosure

Hey guys, I designed this because my RaspberryPi3 got really hot in my enclosure, especially when printing materials that require high heat bed temperatures like ABS or ASA. Therefore, I placed the Pi outside the enclosure which gave me…

Whoops! Backspace Eraser Keycap

Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…

Pi Rack (For Raspberry Pi 5 with N04/05 NVMe Hat or Pi 4)

This is a simple rack for 2x Raspberry Pi 5 with N04/05 NVMe Hat from GeekPi. You need 4x M2.5 screws to mount the frame. You can print colored frames to have color coding to identify the Pis. The first frame insertion will be tight,…

Raspberry Pi 4B Case with Noctua NF-A4x20 5V Fan

Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…

Raspberry PI AI Camera Case

The full instructions on creating a hidden AI camera with Raspberry Pi: Find 3D-Printed RC cars here.

Car Trash Bin (print-in-place, minimal & clean supports, optional magnet support)

DESCRIPTION Is your car door pocket full of trash, snack wrappers, or travel receipts? No more! This elegant trash bin snaps on your car door pocket and solves that problem ;). Upcycle disposable lunch bags or old supermarket plastic bags…

Parashift: cable travel adapter for mixed shifting

Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…

Raspberry Pi Pico WH case

Allows BOOTSEL to be pressed and LED to be seen. No extra materials required (except for the Pico WH). Use the original model if you don't have the extra header(s), as this model leaves a hole in the bottom:…

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Raspberry Pi5 Case (Exposed Cooler)

Raspberry Pi5 case with the cpu cooler fully exposed

Thumbscrew for eco-friendly deskside trash bags holder

This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.

Raspberry Pi Camera Case - OctoPrint - Security Server

This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…

Tripod (telescopic) with Universal Mount (1/4" screw or Gopro-mount) for digital cameras / camcorder / light DSLR

English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…