Wyniki wyszukiwania: rba

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Small Trash Bag Dispenser / Holder for 35L rubbish bags / garbage bin liner

Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…

Headrest for Thule Urban Stroller

The THULE URBAN is a jogger pram and the child lies more in the pram than sits. If you also use the carrycot for leisurely excursions and want the child to enjoy the view, you may occasionally want the child to be able to sit nicely…

Door Hooks (expandable) / Tür-Haken (erweiterbar)

Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…

Replacement Beard Comb for some Philips Hair Clipper Beard Trimmer HC BT models peine barba

Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.

20000 mAh Powerbank

ATTENTION: Strictly avoid short circuit and wrong polarity !!! Part list: DIY powerbank modul 2.4A (e.g. from ebay) 4 Samsung INR21700-50E (21700, 5000 mAh) 4 hex screws M3 x 6 4 insert nuts M3 x D4 x L5 1 m flexible cable 0,75 - 1 mm² 2…

Alfa Romeo 147 (and other contemporary) passenger airbag cover clips

Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…

MSpa Urban Surora Sandfilter Adapter

Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…

Wavy hairband

Sorry for the bad example print, not use to the new filament. I used Autodesk Fusion to create the flat model of the headband. Then I curved it using Blenders simple deform, bending it around a sphere placed next to it. I then cut the…

Spinning Dreidel Headband (Hairband)

This is a headband featuring a spinning dreidel (sevivon) for your next Hanukkah party! The dreidel is removable from the headband and will spin by itself, so you'll always be ready for a quick game! Update 2022-12-25: There is now a dual…

Thundarr The Barbarian

Thundarr The Barbarian

BIKEMATE Adjustable bike light mount with Bikemate Mount / Justierbare Fahrradlicht - Halterung mit Bikemate Mount

Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…

AK-47 underbarrel picatinny rail

3 parts that are held together with M3 screws you will need 4x M3x20 and 4x M3x12 and 4x M3 nuts

USB C PD Trigger Adapter für Powerbank und Ladegeräte für unter 5€

for English see below Wer hat nicht schon mal probiert eine Fahrradlampe oder ein anderes elektrisches Gerät mit einem einfachen 2 Draht USB C Kabel Adapter oder mit einem aufgeschnittenen USB C Kabel mit Spannung zu versorgen. Die…

Airtag Holder for Urban Arrow Electric Bakfiets (cargobike)

I recently bought some airtags for keeping track of my stuff. One thing I really wanted to keep track of was my precious Urban Arrow cargobike. I thought about attatching it to the frame, but wanted somewhere more discrete and settled on…

Bride - Hairband / Braut - Haarreif

Bride - Hairband / Team Bride - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well…

Marking aid for spirit level parameterisable - Markierhilfe für Wasserwaage parametrierbar

For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…

Florball Ball stand

I design a simple Florball ball stand.

Happy New Year 2022 - Hairband / Haarreif

Happy New Year 2022 - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print…

Clash Of Clans Barbarian King Altar

If used as an coaster print it completely solid so no liquid leaks inside it

Hairband - Happy Birthday

I had to create this for a little one who had its birthday. Can fit seniors as well :) Easy print, no special handling… I printed in silk PLA

18650 Powerbank

This is a powerbank ! It is designed to use four 18650 lithium-ion cells in parallel, providing up to 40 Wh on a single charge and supporting fast charging and USB Power Delivery. Materials: 4× 18650 lithium-ion cells with similar…

Clash Of Clans__Barbarian_King Statue

Welcome, and thank you for choosing my model. I made a detailed statue of the one and only Barbarian King from Clash of Clans You will need supports to print the Barbarian King. Happy printing!

Hollow Knight horns hairband

you might need to scale the model differently according to your head size, be sure to measure first before printing just the horn part is also included if you want to glue it directly to a hairband (might fit better) print with low infill…

Groom - Hairband / Bräutigam - Haarreif

Groom - Hairband / Team Groom - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well…

Handle tea bag holder (uchwyt na torebkę herbaty)

This set includes two models: Rim Tea Bag Holder – attaches to the rim (uchwyt na rant kubka) Handle Tea Bag Holder – hangs on the mug handle (uchwyt na rączkę kubka). The handle version allows you to adjust the height of the tea bag…

18650 powerbank - 4 cell

This is a nice small and handy power bank. Built around the very popular 18650 li-ion cell. Also uses a handy charging/discharging module. Here is the link https://www.amazon.com/dp/B0CDWT9295?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4…

floorball medal hanger

Držák na medaile

Maniglia accensione tagliaerba

Maniglia per accensione tagliaerba, dimensione universale adatta anche ad altre applicazioni

Ceiling Curtain Rail Connector Clip fits UrbanRed

Made to fit the UrbanRed Ceiling Curtain Track Rail System https://amzn.to/43jKipe * * Amazon Affiliate Link

Fold-down Handle for an Urban Proof Crate

With the fold-down handle, it's easier to shop with the crate because you only need one hand to hold it. The model is stable. In my test, it easily held 18 kg (two six-packs of 1.5 l bottles of mineral water). To put the handle together…

aeberbach JNS remix semi-threaded

Remix of " Jigsaw nozzle storage blocks for M6-size 3D print nozzles ", I made a slight modification in the thread, so its a semi-threaded entry, that way you can press the nozzle until a point where a manual or slight threading can keep…

solder spool holder wall mounted right | Halter Lötzinnspule wandmontierbar rechts

(English below) @Shiba_Vindicator hat einen wirklich schönen Abroller für eine Lötzinnrolle entworfen. Leider kann dieser nur auf den Tisch gestellt werden (und rutscht beim Abrollen auf einem glatten Tisch einfach hinterher…) und ist nur…

Capybarbar

I recommend adding supports under the axe, the shield, and the capybara’s butt :-) I’ve also included a version with supports in the G-code file.

PSU-lock bewegen, wenn PSU-handle verbaut ist

Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…

Modular Bait Holder for 1x2 inch rail, smelly jelly and powerbait

A handy bait holder that clamps securely to a 1x2 inch rail such as found on many American boats. If you need a bigger rail clamp, you can easily modify the clamp part and not have to redo the entire model. This is due to the slide-in…

Original Prusa Enclosure MK4 Mülleimer vor dem Drucker / Garbage bin front

It's a garbage bin which can be placed in the front of the printer in the Original Prusa Enclosure. I designed it to use the free space in front of my printer within my Original Prusa Enclosure. Notes: I printed the objects with 0,2mm…

21700 powerbank- 20000 mah dual output/input

21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…

Hairband repair

Look at the dimension, before you make.

Tvorba vlastní propisky

Studenti si po výběru náplně změří a načrtnou možnou podobu propisky. Dále přes aplikaci Tinkercad vytvarují tělo propisky, které budou pomocí tisku prototypů postupně vylepšovat.

Wii SensorBar Holder für Philips TV (65PUS7906/12)

Simpler Halter des Wii SensorBars für "Philips 65PUS7906/12 65 Zoll LED Android Fernseher". Zum selber mit Klebeband draufkleben. Mit zwei Haltern auf der Rückseite für das lange Kabel des Sensors.. Einfach mit PLA in Schwarz (oder…

Vykrajovátko na linecké cukroví ve tvaru florbalového míčku

Vykrajovátko na linecká kolečka ve tvaru florbalového míčku. Vykrajovátko je oboustranné, tedy z jedné strany kolečko (spodní vrstva) a druhá strana je děravé kolečko (vrchní vrstva). Je potřeba zapnout podpěry. Fotografie je jen…

Od žáků pro žáky - Tvorba hmatové abecedy pro žáky 1. ročníku

Cílem našeho projektu bylo vytvořit něco smysluplného, po konzultaci s vyučujícími 1. stupně ZŠ jsme se ROZHODLI pro 3D učební pomůcku - hmatovou abecedu pro žáky 1. ročníku

Functional Print-In-Place Garbage Truck

Join the Patreon or Printables club! Or checkout my paid models ! The truck has a working lever for picking up the trash can and dumping its contents, a working back door, and rolling wheels for added functionality. The trash can also…

Rubberband Submarine - Print in place

Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…

Capybara Barbara

Meet Barbara, an adorable capybara with an oversized snout and a cute, chunky shape that's perfect for animal enthusiasts looking for a touch of wildlife. Her smooth lines make her the perfect companion for beginners and experienced…

Side Protection for Electrical Insulating Tape /Seitenschutz für Isolierband

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…

Rubberband Gun / Rubber Band Pistol

Pokeball, MasterBall, Greatball - Pokemon

If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Easy to print and assemble Pokeballs. Assemble with superglue. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…

Barbarian - Male - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Barbarian Collection

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Barbarian - Female - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Desk Bin - Medium garbage bin - Trash

Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Medium Waste Bin Prints without support, perfect for your desk. Notes: All parts print without support.…

Compact Rubberband Spiderman Shooter (Web Shooter Style)

print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best

Garbage bag holder top/side. Standard, Hexagon and Voronoi design.

Hi, This is my version of garbage bag holder. I sticked it with double sided tape on upper side of my cabinet. You can place it also on side. I prepared several models, inner diameter 51mm and 68mm and 51mm dual holder. Also you can…

Fixum Dude Motors Print in Place Garbage Truck

Introducing the FDM (Fixum Dude Motors) print in place garbage truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…

Mini Garbage Bin

no supports needed. prints well under most settings. stl for single color and multi color prints in files. Use filament for lid hinge with balled/flattened ends. Edit1: fixed a slicer error. repaired model and reuploaded

HairSnaps, The Modular Hairband!

HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…

Jebediah Kerman (Kerbal Space Program) (IVA suit)

Jebediah Kerman from the game Kerbal Space Program in his IVA suit. the suit is a mix from the different suits that the game had along the different versions, cinematics and the ACES suit. I printed it at 250%, .08 layer height on my…

Thule Urban Glide 2 - Leg holder

Leg holder for Thule Urban Glide 2. Print without supports. You can cut model to smaller height.

Garbage Can

I wanted a small garbage can for my printer scrap that could be printed in vase mode. The model can be easily scaled to any size. Update : I added a slightly lower res version so the file size is not so large. Don't forget to hit the Like…

Barbarian Collection

here be barbarians for your TTRPG needs

More durable spring attachment for no rubberband OTF

The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.

Horns on hairband

Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA…

Konfigurierbare Box (incl. Fusion File) - configurable Box

deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…

Rubberband Butterfly

This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…

Barbarian Santa Claus

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Kit Card Version - Print-in-Place Garbage Truck

Original Model (this kit card uses the small version) This model was just for fun, however, it does provide better bed adhesion for those that had issues printing the original model. There is no support or assembly required. If you would…

Barbarian Collection 3

My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…

Ikea Skadis erweiterbar

Erweiterbares Model von ikea Skadis. Durch eingeschränkte Druckgröße habe ich das Ikea Skadis als erweiterbares Model erstellt. Man kann den Skadis Organizer so lang wie man möchte machen. Benötigt mindestens jeweils 2 x Ecke 1 2 x Ecke 2…

(22) Barbarian - Female - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Burbaloni Luliloli

Burr baloni luli loli, capibarello cocossini, it is very rarely seen on the coasts of Bali, a unique coconut of its kind, which contains a capybara inside, it is such a rare event, that the locals gather around a bonfire, to celebrate the…

Backrest raiser for Thule Urban Glide 2 stroller

The most upright backrest position on the Thule Urban Glide 2 stroller is too reclined. This gadget props it up higher. It's based on the ingenious design by @Thomas_157995 which is really clever and well done. I've used one of Thomas's…

Pot lid holder (expandable) / Topfdeckelhalter (Erweiterbar)

English: Expandable pot lid holder. Each print is for 2 pot lids. There is a start piece ("Topfdeckelhalter_Anfangsstueck.stl"), a middle piece ("Topfdeckelhalter.stl") and an end piece Length: 131mm Width: 140mm Height: 100mm Towers…

Mini garbage bin for 3D printing waste (vase and normal mode)

Basics about this design: The design of this elegant octagon bin was actually done in a few minutes. Only after I had printed it from PETG, I realized that when printed in vase mode, the slight shrinking of PETG gives it an additional…

Barbarian Miniature

This is my character from my DnD game. He is the avatar of Thor to walk among the humans. I hope you like it and have some awesome adventures with him.

Urban Card Kit - Fork, Spoon, Knife, Toothpick

This simple but clever print might come in handy one day. It includes a fork, spoon, knife (with a serrated edge), and a toothpick. Additionally, it comes with a clip that is made to hold everything together after its been disassembled.…

Bambu Lab P1P/X1 garbage chute

A garbage bin for the P1P and X1 printers that funnel the ejected filament to the from of the machine. This way you don't need to reach around to the back of the machine to empty the bin or check if it is full. Model prints in 3 pieces…

Garbage Bag Holder

This is a bracket that you can use for a small trash bin. It uses the small carrier plastic bags that stores use for your items or any other small plastic bags.It has two mounting options. It can be attached to a drawer or cabinet door of…

(32) Barbarian Elf - Gender Neutral - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…

Urban style Ghostface [NO AMS]

Urban style Ghostface No AMS is needed, Ghostface is printed in parts and you can use any color for hoodie, pants, face and shoes as you want The last print plate is if you want the face print in multicolor using AMS but is not needed.…

Rubberband gun target

3 knock down targets for rubber band guns. May also work for airsoft bb's, but the targets are designed to fall over with very little force. For best results, mount the base down or add weight to it to help keep it stationary. If you…

Conan the Barbarian Bust (STL)

✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) CONAN THE BARBARIAN! This isn't your Arnold Schwarzenegger Conan the Barbarian, it's more like your Frank Frazetta Conan the Barbarian,…

Garbage Bin - 24x24x45(x) cm

Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…

Fenerbahce 5 Star Logo (STL file fixed)

Fenerbahce SK's 5 Star Logo.

The Durbar Container - 6 Sizes

The Durbar Container This container series was created for everyday use. The Durbar pattern provides a grip area on the container and a raised surface on the lid. One lid fits all containers. The inner diameters of these containers are:…

Powerbank 21000 mAh - 18650. Power 22,5w

Powerbank 21000 mAh with 18650 Li-Ion batteries. Part list: powerbank modul SW6208 (power rating of 22.5W) 6 Samsung INR18650-35E (6x3500 mAh) 2 screws M2x10 (for housing) 2 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the…

Kleiner Pokal für zweifarbigen Druck - Modifizierbar

Kleiner Pokal für zweifarbigen Druck (Sockel und Pokal sind separat). Beide Teile sind modifizierbar um zum Beispiel einen Text auf den Sockel zu drucken. Support bei den Griffen am Pokal empfohlen. Beliebig skalierbar. Befestigung der…

Dust yerba mate remover (desempolvador) [v3]

Dust yerba mate remover (desempolvador) This is a new design [v3] of my dust yerba mate remover. The thread is assembled to be strong and unbreakable. Print Settings Printer: Kuttercraft Rafts: Doesn't Matter Supports: No Resolution: 200…

Raging Half Orc Barbarian Collection

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Duplo popelářské auto / Duplo Garbage Truck

CZ: Remix modelu od @Juergen_285577 a @Scared__Bunny, který se více podobá popelářským vozům používaných v naši ulici. Další úpravy: z modelu byly odstraněny ostré hrany a výstupky pro větší bezpečnost malých řidičů hmotnost modelu byla…

Strong vase mode garbage bin / can

Thanks for choosing this model! It is: Quite sturdy Designed to print using vase mode. A fast print (prints in under 2 ½ hours on a MK4). Remixable (with .step and .f3d files attached) Able to be used commercially / sold (see licence) I…

Razorback from THE EXPANSE TV show - 1:30 Scale (adaptable)

Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…

The Barbarian - Owls & Dragons

A mighty owl-man barbarian. Strong and down for anything. ANYTHING. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build…

Small Dumpster Garbage Bin for failed prints

I was looking for a small garbage bin to keep close to my printer for failed prints and other excess material to throw away. I was looking for something rectangular to maximise the volume while fitting in the limited space I have…

Desempolvador de yerba mate 75%

Despolvador de yerba mate.

Leatherback Sea Turtle Bust

This is the printable version of a Leatherback Sea Turtle I created for the Digital Life 3D Project . I test printed this model on my Ender 3 and now working on painting it. The main piece prints best with the head pointed upwards and the…

Case for Makerbase MKS TS35 V2.0 touchscreen

I could not find a ready made case, so I decided to design something by myself the case is for the Makerbase MKS TS35 V2.0 touchscreen (shipped with MKS robin nano V3) it is the one with a control button but no reset switch maybe someone…

MSPA filter housing for filterballs/Filtergehäuse für Filterballs

The filter is for the new paper filters with combined filter and return, please print the version with open lid. The filter can also be used for the older whirlpool types with separate filter and water inlet, but you will need the adapter…

Horns on hairband v2

The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA (matt PLA was used for the pictures) both 0.1 or 0.2 mm layer height should work. 15% infill is sufficient…