1799 modeli
This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…
A simple burger patty press designed to be strong enough so you can really pack your patty tight. The bottom is removable so your burger just pops out. Waxed paper separator discs in a variety of sizes are readily available on Amazon.…
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Original Printfiles here https://www.thingiverse.com/thing:3681512. There's also a build instruction. The mobile phone holder is not compatible with new iPhones which have the large stove camera lenses on the back. The holder is only…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
Prusa MK4 feet's V2 Changelog increased stability and contact surface 100% infill to reduce springing and transmission selects Print settings material: Prusament PETG layer height: 0.2mm infill: 100% V1 Print settings material: Prusament…
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket. This makes it very unlikely to be found should an accident render the electronics unresponsive which could be deadly. This model…
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Yet another GoPro quick release mount.
Dice Tower | One-Armed Bandit with Functional Lever for Dice Release This model remindes of a one-armed bandit in the casino. You roll the dice inside the tower. When you pull the lever, the dice fall out and you can see the result! The…
11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
Give your fingers a break while one handing your Kindle.
Quick release desk stand for Alley Cat's T-Beam V1.1 Case.
A doorstop where you don't have to bend down to get it in place or try to position it with your feet. The door glides over it when opening and is released by pressing on the top of the doorstop. Prints in place as one part using a…
This project includes three versions of the 3D-printed Manfrotto 500PLONG quick-release plate, designed for use with Manfrotto video tripod heads. These models are compatible with the 500PL system and offer options for different printer…
Are you tired to screw the bar-nuts every five minutes during your workout, like me? Then easy print you some “Weight-Clamps” 💪 → simply squeeze togehter and slide on The nuts are designed for a spindle Ø28 x 3 mm. Tested with a weight of…
Piriformis & Psoas Release Tool Unlock targeted relief and soothe deep muscle tension with the Piriformis & Psoas Release Tool . Designed to simulate a therapist's knuckles, this ergonomic tool applies precise pressure to hard-to-reach…
Unlock targeted relief and soothe deep muscle tension with the Piriformis & Psoas Release Tool . Designed to simulate a therapist's knuckles, this ergonomic tool applies precise pressure to hard-to-reach muscles in your hips and lower…
Overview Most city bikes have the ability to have a rack in the back of the bike. These tend to be very narrow and it is common that people strap on crates or bags to make these racks usable. Almost universally these are difficult to…
A replacement part for the Dyson DC14 upright vacuum cleaner. This part replaces the wand release catch. Printing: Printed with ribs facing up Build-plate supports for at least 35 degree angles PLA, 0.15 layer height resulted in…
When the Prusa PSU quick-release is used, the pass-thru is useless and another hole in the enclosure to be closed. This model covers the pass-thru hole from the inside. It is simply snapped between the PSU and the back panel over the…
Reversed screw orientation on the arm backplate, as I didn't have screw with exact length to make contact with nut, and not to obstruct quick release mechanism.
The thumb screw for my Moza Mini-P gimbal broke (well more disintegrated) the night before a filming day. I'm a newbie so this stupid thing took me 3 hours but it saved the gimbal. Before you fit the cap on the screw, make sure all…
Alternative Quick release adaptor for Korum system
Spare part - releaser of Christmas Tree Stand Example link: https://www.therange.co.uk/christmas/christmas-decorations/tree-decoration
Hero Me Gen7.4 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across 3D printers, hot ends, extruders, ABLs, and other components. The Hero Me Gen7 is all about choice and personal…
Toilet paper version here ( Exclusive model for members ): https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r A paper towel holder with a print in place mechanism and quick release and load…
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
This is my remix of Jesses side release buckle over on Thingiverse: https://www.thingiverse.com/thing:312961 The male part now fits either way, also it is scaled down quite a bit from the original and the edges are rounded a little for a…
These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…
Printed with easy ABS. I also added an editable file to make it easier to modify. I used 1 x M6 furniture connector bolt (picture added). I hope it will be useful for you. For those who want to use only the screw and nut (without…
Quick Release Buckle Clip (backpack & belt Clip)
This model combines the functionality of both an AMS PTFE tube and cable release tool into one simple small part. Can be stored hanging behind the end of the cable (see photo) ≤0.2mm layer height. 6m45s print time Also available on…
This hook releases its load if you turn the little lever on the side. The force you need for this is independent from the load wight. If you attach a smaller rope to it, you can trigger it from a remote position or from the ground.…
Note: This model, design, and rendering was done by Arron_mollet22 . You can find this listing on Thingiverse . Reposting under the Creative Commons - Attribution - Non-Commercial - Share Alike license. I did not see this posted here yet,…
Allows you to take a small monitor or graphics display tablet e.g. Wacom Cintiq 16 off of a standard monitor arm and put it back without needing a screwdriver or precise alignment of the mounts due to the self-aligning dovetails. You'll…
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
Ever since stumbling upon buckle designs made specifically for 3D printing I kinda got stuck on the idea of developing my own. So this is my first official attempt ;) All parts are designed to be printed without supports. You can mix any…
Tripod hızlı bırakma plakaları evrensel değildir. Bu, en çok kullanılan ebatlı üründür. @Farklı ebatlarda ürüne ihtiyacınız varsa @en geniş yan ebatlar 44*44mm
Second type has a tight cap, to hide the srews. (you can remove it with a screwdriver) And one dust cap for the wheel. Watch the name convention, 1-2-3, find the file name connections beetween brackets and letters.
Designed this to help my kids to unbuckle themselves and it's also a great aid anyone unable to depress the seat buckle release. Print Settings Nozzle Size: .4 or .6 Layer Height: .2 (.4 nozzle) or .4 (.6 nozzle) Infill: 20% Material:…
version 2 is out and its smaller then ever!! Introducing the super cool Quick-Release Picatinny Rail Mount, a game-changer in the world of firearm accessories. The quick-release allows for easy changing of accessories or adjustment on the…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
mixed the quick release (thanks DerrickDarrell) with my front Y bracket Update: New version added - bracket moved to the left about 13mm to give more room to be able to use it with wider bins than mine. See picture from spitfire in makes.…
Hi, This is my take on a tool to help release filament from the gears in the CFS's 4 way hub. This is useful if you experience a jam and need to manually retract the filament back to the CFS. The position and firmness of the motor release…
Strong quick-release square pipe clamp For 20x20 mm square pipes. Scale proportional for other dimensions. I may add more sizes. Included variants for horizontal / vertical attachment of accessories (with M5 screw hole). You could remix…
I designed this toilet paper holder with a quick release system. You just need normal setting for printing but it does need supports although they should come off fairly easy. Then obviously, you'll need to screw it to the wall. If you…
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
What even is this? If you're interested in a sturdier card box that uses more filament, check out Dre Wizards Stackable Trading Card Drawer . I designed this one from scratch with their design in mind (same internal drawer dimensions).…
Printer brand: Creality Printer: Ender-3 S1 Pro Supports: Yes Infill: 50 Filament brand: Sunlu Filament color: Black Filament material: PLA+
Strong quick-release tube clamp - fully printable I built this for fun, based on my Quick release clamp for square pipes as it may be useful for round pipes too. For tube diameter 33,7 mm. Scale proportional for other dimensions. You…
Perfectly sized pins for my MMS designs or your Picatinny products! They're designed to be held in by tension. And if printed correctly, they'll hold very well until specifically pushed out when needed! ///These Pins Need To Be Printed…
This was designed to be very minimalist and a quick print. Feel free to make and sell these if you want but please be sure to give me credit for the design. My truck is a 2010 F150. But I know it works for multiple years near mine at a…
Made this to wall mount my NRG Quick Release steering wheel when not in use. Printed at >50% infill No Supports needed Use 4x wall anchors to mount into drywall.
A tight side-release buckle for 25 mm straps. Final dimensions (width x length x thickness): 31 x 67 x 9 mm Do NOT use in places or situations where life depends on the device! It was not load tested. Print Settings Printer Brand: Prusa…
This is a quick release connector! To open it, push the middle ring upwards! To close it, insert the lower connector into the upper one and slide the middle ring down! Quick and strong hold! Print settings: Infill: 75% . Support: No Layer…
3d printed quick release This masks were given to us by our employer. They are very nice but putting them on is kind of tricky. This quick release makes it much easier! There is a .step file if you want to change it to your needs. Print…
Want your young kids to be more self-sufficient and get out of the car on their own? This allows for them to be able to unbuckle the lower buckle of a car seat on their own. Ideally only given to kids who are mature enough to not unbuckle…
Cable chain? Umbilical? Introducing the SwingArm! We love to innovate and we constantly improve our existing printers. Even with the tight time constraints in the development of the CORE One, we reworked a vital part of the printer before…
*** DISCLAIMERS: This is our first 3D print, and we might not always know what the best 3D printing practices are. If you are more experienced, feel free to adjust the files if needed. Some components can be a bit snug. It might be a good…
Hexagon styled seedling planters 3 heights to combine for visual esthetics or different plant needs. Easy to fill when connected due to reduced spill over. Careful release by gently pushing up the bottom inlay. 13 pieces fit one standard…
A better way to attach your t300 wheel and you can skip the annoying screw.
Easy release hook, holds very well when under weight, didn't properly test it, but it can hold several kilograms easy. To build it, you need: 2x Screw A 1x Screw B (optional) 1x Screw C 1x Hook A 1x Hook B 1x Clamp (dual screw version for…
This is custom GoPro mount for my friend's special order. The idea was to mount GoPro base in front center. It works fine and get a best possible camera angle. I will post better pictures of real print soon ;) Skechup file included - feel…
After an extensive search for a suitable heat set insert tool online, I was unable to find one that met my requirements. Inspired by various sources, I decided to design my own tool, utilizing 3D printed components and readily available…
Update 2022-05-12: Design tweaked for the V3 again after some feedback from folks. Personally tested on both Rapidfire + TBS Fusion modules! Update 2022-04-02: MAJOR DESIGN UPDATE! V3 adapter has been overhauled to successfully fit other…
Umbrellas are the best way to stay dry on a rainy day, and their main downside is that one has to hold it. This model solves this by making your backpack hold your umbrella for you ! Also works with sticks or other long and thin objects…
This is the second version of the Quick-Release Picatinny Rail Mount. The V2 is about 40 percent smaller by volume then the V1. The quick-release allows for easy changing of accessories or adjustment on the fly. This thing is fully…
3d printed quick release for corona face masks. This masks were given to us by our employer. They are very nice but putting them on is kind of tricky. This quick release makes it much easier! There is a .step file if you want to change…
A new type of quick-release clamp designed to slide and lock on aluminum t-slot extrusion. With this fully printable model you can build bar clamps of arbitrary size and mount multiple clamps on the same bar. Minimalist/functional by…
Have you ever dropped your Nintendo Switch or bumped your joy-cons too hard or just worn them out and they won't latch anymore when you plug them in? Well majority of the time, the little plastic piece hidden on the backside of the…
This is a tilting style mousetrap with an adjustable magnetic release for a snap action. The counterbalance weight is also adjustable. I designed it to work with pennies, but the two threaded plugs can sandwich any type of mass and allow…
This replaces the housing core part of the Annex Engineering's Sherpa Mini Release 2 extruder to accept an ECAS coupling for the reverse Bowden feed. Has non-round geometry to allow printability and minimal force to push-in. Other designs…
*05.12.2024 I just noticed that on the rear part of the Long Levers, some dimensions are too tight/ not how i want them
I made some modification of model by dede67, his model has the same thin walls like original (which is originaly made from ABS), such thin walls is is easy to crack (around the holes). My remix add some material around the holes and the…
Use PETG or possibly ABS/ASA (PLA does not flex well enough). Designed to be printed without support. Note that one of the pieces should be reversed when connecting them.
This push-release support for remote is a remix of the 2 following: https://www.printables.com/fr/model/223384-google-chromecast-tv-remote-push-click-mount by ByteSlinger…
A print of the Surgical Mask Tension Release Band for Ear Comfort & Extended Use from the NIH website. Perfect for the Prusa Mini. https://3dprint.nih.gov/discover/3dpx-013410 No nurse/tech/doctor will refuse these. Contact your local…
Quick description is:- The rear portion stays attached to the printer. The front portion is held in place by Eight 6x3 magnets. When you need access to the tool head, you simply pull the front portion off and that's that. Instant access.…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The special feature is that the buckle can be mounted without having to cut the loop band. Due to the screw used as a retaining pin, the buckle…
I wanted to be able to quickly disconnect all the filament feeds to my MMU2 unit. I decided to use these quick release parts from the PTFE tubing I recently purchased and created a coupler to pair them up. It gave me a chance to learn how…
Just a simple snap into place knob that allows you to more precisely, and better control, your pressure release by hand. (replaces the need to use the lever) Note: Tolerances were designed around the use of ABS filament with a .4mm…
This is a humane mouse trap for catch and release, so as to not hurt the mouse and allow relocation. This is not really a leave and forget kinda a trap, but one to either help you catch a mouse as opposed to using a cardboard box. Or in…
I STRONGLY RECOMMEND PRINTING IT LAYING ON ITS SIDE. There it is! For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.…
Mag release lever replacing the standard button on the Nerf Stryfe. There are two versions, a short and an extended one. STEP-Files are included. Print Settings Supports: No Infill: 20% Notes: If you experience many blobs on the surface…
Belt buckle quick release, Print with 80% infill for more strength in the locking tabs.
Update 10/24/22 New version uploaded. ESPAÑOL Subida la nueva versión. Update 10/23/22 User SwagDad informs me that the design always leaves the button pressed. This is true. I have had ten coils with these buttons and have not had any…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers, 4 perimeters and infill 15% for the main body 100% infill to little parts Support is needed…
I have a tripod with the Velbon QB-4W Quick Release Plate. So I remixed these two components together to have a cell phone mount for my Google Pixel 2. A bit overkill for what I needed, but a fun little project. Supports are not required…
This is a very simple model. I did not find a buckle for cord with a release by pressing the sides. It prints without support, the cutouts will have a little bit issues without support, but just a little bit. The holes have a diameter of…
remix of a remix extended mag release
UniFi AP Release / Removal and Reset Tool for "unlooking" UniFi Accesspoints Print instructions Category: Hand Tools Summary UniFi AP Release und Reset Tool for "unlooking" UniFi Accesspoints Print Settings Printer Brand: Prusa Printer:…
This is a tougher and easier to print quick release version. I made this mainly with face masks in mind but its good for all kind of applications. Print instructions You can print this with your standard setup. The only thing you might…
No supports required. Printed in PLA. Have not tested the weight capacity, but 1kg should be easily doable. Tolarances are tight to ensure a wiggle free connection. After printing, open and close the quick release system a couple of times…
![[REMIX] Side Release Buckle](https://media.printables.com/media/prints/893197/images/6954021_bcb3ca3a-2941-4485-b2c8-8efc9394b770_1937b2a9-331b-4a86-a6f8-c3370d38a7c7/remix-srbuckle-1-1.jpg)
