Quick-Release Bar Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new type ofquick-release clamp designed to slide and lock on aluminum t-slot extrusion.
- Ocena
- 4,714 / 5
- Polubienia
- 200
- Pobrania
- 648
- Wydruki
- 6
- Wyświetlenia
- 4711
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A new type of quick-release clamp designed to slide and lock on aluminum t-slot extrusion. With this fully printable model you can build bar clamps of arbitrary size and mount multiple clamps on the same bar.
Minimalist/functional by design: only two parts, both print without supports and assembles like a puzzle.
The cam-lock lever mechanism is designed such that it puts slight pressure in the jaws when it locks and releases quickly with a snap then slides freely, making part switching effortless compared to classic vise/screw models.
The model is fully parametric via Customizer or OpenSCAD: not only you can control the size of the clamps and their features (grooves and such) but also fit these on the most common aluminum extrusions:
- Misumi 15mm/20mm (1515 or 2020)
- OpenBeam
- 80/20 1010 1"
- MicroRax 10mm
- ... or even your own T-Slot or C-section profile.
A few video examples: https://youtu.be/aWFwbUx84aI https://youtu.be/W1OkOy\_swrU