Źródło oznaczyło ten model jako treść 18+.
- Pobrania
- 49 247
- Polubienia
- 12 541
- Ocena
- 4,75
18 342 modeli
Źródło oznaczyło ten model jako treść 18+.
Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
I love the original ButtPals design by dgoalva but I like to twist my bread clip to put it on and off and the original design was to thick to give me that freedom. So I printed them at 2 mm height and noticed a weak point breaking the…
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Perfect gift for Mother's Day Presente perfeito para Dia da Mãe Regalo perfecto para el Día de la Madre If you like my work consider Buy me a coffee 😊
First of all, I am not the initial creator and only did some adjustments specially for Prusa Printers all credits for this awesome work please to this Guy: https://www.thingiverse.com/thing:3356047 Hello all, I still feel that MMU2s…
About This Remix: This is a remix of the Sith Acolyte Mask (Star Wars) by Killonious . Killonious did a wonderful job designing the mask as a prop display mask. They also have an etsy shop . I made this remix because the mask was…
I saw the super cool print in place box by DrJones and i wanted to try to make it so only I can open it. Print it with low filament flow so the parts dont get stuck together. (All redy set to low flow in the g.code) All box sizes are the…
This is a really fun print that has mulitple layers as originally designed by 5narkHunt3r. The only issue I found was it broke really easily. I removed the joints and replaced them with a stronger one I designed. It took some time but was…
Round version of the eye is added Project file added G-code file added
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Support from build plate only Seam: Rear/Back If you like my work consider Buy me a coffee 😊 Check ou my other cute keychain
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Multimaterial remix. Original model by Alsamen: https://www.thingiverse.com/thing:4410839 Print instructions Adjust purge volumes for your filaments.
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
This model was recreated based upon user Laurens model “ cigarette container with lighter” - but I wanted one to hold a full sized lighter and 100 sized cigarettes. I also wasn't overly fond of the amount of threads on it. I went back to…
Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up…
Marble filament Click on the image, no matter what sizing I did, the import cut off image.
You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
I wanted to speed up the print time and save some material so I made the hex holes bigger.
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
Hose strut for swimming pools Intex, Marimex, Bestway, etc. Ideal use with 32mm pool hoses. The size of the hole is 40mm
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
This is a remix of the print sheet holder designed by Waldmops. This a stand alone version. I printed in PETG but it should work with PLA Infill: 15% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
MultiMaterial version MMU remix from: https://www.thingiverse.com/thing:246198 Print instructions E1 Yellow E2 Black E3 Orange E4 Red
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Design Concept This 4 Ring Gyro Fidget Keychain is a compact and portable remix design meant to provide a calming fidgeting activity. Circular rings nest inside each other, offering a smooth spinning effect. Use Ideal for stress relief…
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…
The tolerances were a little tight so I changed them in this version. Also fixed the weird looking hole on the large flap. UPDATE: I messed up the orientation, new model has the helical gears in the right orientation so that they can be…
Can be printed without support
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
I purchased this model to make as a gift for my niece. The dragon and flames are beautiful and printed without any issues. The stand prints fine with a brim, but was a bit weak for my tastes. It obviously needs weight on the stand to…
Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…
Video of the make The Supportless Cute Dancing Fox Figurine created by Macroglossum is now available for 3 color printing on bambustudio! Follow me on Instagram / TikTok / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy…
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
Saw this and did not have the container mentioned in the description so i pushed some threads and a bottom lid into the frog and avoided having to buy anything. Log space is fairly short. probably 10-15 mm (1/2") or so. printed in abs to…
This is a great dragon's head model by printedobsession. This will look amazing on any display, from a desk to a shelf. I RECOMMEND USING YOUR OWN SLICER SETTINGS. This is a very complex print. I recommend (for fdm printers) scaling it…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…
This is a remix of one of the excellent handles by @TripleGWorkshop. It provides a stronger print by changing the orientation during printing. The original model is split and alignment pins have been added to aid in gluing the halves of…
Update: If you're having trouble printing both back halves together, I've uploaded them as separate parts so they can print separately. When printing the back half, I suggest separating out the parts into objects and setting the infill on…
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
(Thicker) Mini Shoe Horn with HONEYCOMB Cut-Out | REMIX Made a HONEYCOMB Cut-Out remix from the great original model and added a hole/honeycomb version for the thicker version of the shoe horn as well, the original hole was a bit too…
A crank with longer shaft for manual re-spooling when the hexagon adaptor for an electric drill is in place. With this crank you can turn the spool manually even when the electric drill adaptor is installed. The normal crank will collide…
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Bed Scrapper w/ Replaceable Blades: Tired of reprinting a whole bed scrapper when the edge gets worn? Just print another blade! A practical, fast and environmental solution! Print time on the blade is only 9 minutes ! A multipurpose…
The frog itself doesn't need supports, but the hook does.
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
This sleek and stylish case is the ideal way to jazz-up your Raspberry Pi Zero! It is aesthetically pleasing, as a number of color combinations can be used, as well as displaying the Raspberry Pi logo proudly. It also doubles as cooling…
This is based off of the NIH surgical mask comfort strap designed to hold the loops off of the ears. https://3dprint.nih.gov/discover/3dpx-013410 and https://www.prusaprinters.org/social/1755-eric/prints This needs to be printed at: 0.2…
Increased base height to strengthen and made less deep to make getting parts in and out a little easier. Supports: No Resolution: 0.3 Infill: 20% Notes: Sliced in Cura w/ Horizontal Expansion = -0.3
I printed the Makerbot gear fidget a few times and wanted it to have two sides so i remixed it. Print instructions Layer Height: 0.15mm Infill: 15% Supports: No
While optimizing the placement of instruments on the pegboard, the original clips broke frequently. I created a version with enhanced spring strength and was pleased with their survivability. The original model can be found here…
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Small model of a stove/oven/range, REMIXED for one-step printing
Normally Id avoid uploading a design ive changed so much at all let alone as a remix but with the satin sheet, MK4 quality and decals I wanted to share it for other people to have the same success. Altered the design a little to look a…
Check out Digital-Twins original Print for the first Gen. Apple Pencil! It's necessary to print with a raft. Else it will hardly stick to your printed because of the small first layer. You can set the rest of the print-parameters as you…
This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…
Remixed the ethernet port cover to print in an orientation that makes it far less likely to break off within the port. This orientation also increases the part surface on the build plate - reducing the need for brims. Finally, I changed…
Same as original remix but for spools with thicker walls (thanks to WhatWouldAnEngineerDo for pointing out that cardboard spools are a bit thicker). The first remix is at:…
I remixed Jonas whistle with a scout sign emboss. Now updated! with 2 new models.
Self defense use, a novelty, or whatever you choose. Maybe this will help you drink from the skull of your enemies? Maybe use it while smoking a cigar and using the skull of your enemies as an ashtray.…
This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position. The flamingo…
I took this excellent model and remix the hinges (bigger with a plug to make it mobile). I've change the interior covers (to participate in a printing challenge), in one side I added a Sun clock, and in the other side a message Witten…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, Organic If you like my work consider Buy me a coffee 😊
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
28 April 2023: I will no longer be supporting revisions to this model. You can use it as is, and add negative shapes to fit the dimension of your tape/magnets. I have been so busy that this has fallen off the list of priorities. It's…
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Same as the original with hidden screws but cut down to four sheets and scaled up so you can put your sheets in landscape orientation. Print instructions Rotate the object by [0, 0, 33°] and print the infill with an angle of 78° .
E3D socks will fit the mini and worked well for me, but there is some noise in the community about how stable they are. I wanted my own. If you're based in the UK and would like one of my prototype moulds or socks, private message me.…
I've printed it with scale 120% (=40mm) and some with 150% (=51mm) for big bags. You can also scale only the z-direction for more strenghts. The originally size is 34mm. Easy to print!
MMU remix of Grim reaper https://www.thingiverse.com/thing:497124 I am not a direct owner of the model. Scythe First color - brown Second color - silver Lantern First color - silver Second color - black Third color - brown
Remix of https://www.thingiverse.com/thing:4894166/files A simple travel case for those who often keep a pack of gum on them. Much studier than the typical disposable paper-backs but small enough to fit efficently in your pocket. Remixed…
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…
Disclaimer: This is a remix, original designs belongs to creator. Original model: https://www.thingiverse.com/thing:2975582 Design improved for better motor fitting and cable management. Designed for 40 x 40 x 12mm 5V fan manofactured by…
More FDM optimized version of iLabs CLIPPY. CLIPPY seems to be a rather exact copy of the JAYO/SUNLU/(others?) filament clip supplied with 250g spool sets. This design is my absolute favorite after testing many. Big thanks to iLabs for…
This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…
I have remixed this to add a hole in the bottom. This hole is sized just shy of 7mm so that you can melt a threaded insert in nice and tight. Big thank you to the original upload, this helped with my PiCam security system mounting. I…
A quick remix of https://www.printables.com/@Robert headrest hanger to have it stick out less. Thanks for posting the .step file to make remixes easier. Picture shows the original and the remix. I printed with 0.3mm layer height and 4…
This holder fits Prusa MK2/MK3/MK4 steel sheet size. It is not compatible with Prusa Mini or XL steel sheets. For mounting options, please see the the original model . Please note that you don't need to mirror this model whether you want…
I love the model by @RobertSoto_503356, it is a real work of art. He mentioned that he needed to print a portion of them in TPU to do the assembly. And they needed supports to print. So… I thinned the shell and filleted the edge to make…