Wyniki wyszukiwania: rescue

Sortowanie

171 modeli

P
Printablesjanuks

Replacement propeller for Schleich Animal rescue helicopter (42476)

Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)

Pobrania
148
Polubienia
2
Ocena
5
P
PrintablesA_R_B

Rescue Reserve Button (quick pressure closure or normal sewing)

Just another nice button. Can be sewn normally, or - if there is no time or no accessories - quickly attached with pressure for an emergency. Maybe not for permanent use, but enough until home, or until the day is over. Use Nylon or ASA…

Pobrania
95
Polubienia
36
Ocena
0
P
PrintablesJohan87

PAW Patrol Rescue wheels replacement projectile

I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…

Pobrania
80
Polubienia
5
Ocena
0
P
PrintablesJakub

Rescue boards scale 1:10 / vyprošťovací desky

Malé vyprošťovací desky v měřítku 1:10. Velikost XL : 35x137 , průměr díry 3,2mm Možnost kombinování s kanystry. Možnost přidělání na zadní držák kanystrů.

Pobrania
59
Polubienia
11
Ocena
0
P
PrintablesBounet

Bambu Lab spool holder rescue

The original Bambu Lab spool holder is such a pretty piece of metal I couldn't bear to put it away in a drawer forever since it goes to the worst possible place on the machine… So, I gave it some feet :) You will need 2 M3x10 or 12.…

Pobrania
2161
Polubienia
447
Ocena
4,97
P
PrintablesMatthew Henry

Rescue Boat

inflatable boat

Pobrania
2112
Polubienia
127
Ocena
4,89
P
PrintablesPechi

RC trailer 1/10, RC příves 1:10 RGT Rescuer RTR

https://www.printables.com/model/1122014-tazne-zarizeni-rc-110-towing-device-110-rgt-rescue it is necessary to describe the parts when printing! Pneu https://a.aliexpress.com/_EQaJNvO PLA AURAPOL 25% infill 3 walls .02 layer height no…

Pobrania
1085
Polubienia
361
Ocena
5
P
Printablesdbmeed

Fire Rescue Door Wedge

Simple little wedge that some members of the local FD asked for. Hole for a lanyard if desired. Printed in ASA 100% infill, and it'll take a beating. Fuzzy skin for extra texture/grip. Added a smaller sprinkler wedge as well; not yet…

Pobrania
986
Polubienia
176
Ocena
5
P
Printablesstayzeef

SeaRescue Catamaran - Versatile 3D-Printed RC Boat

SeaRescue Catamaran – 3D-Printed RC Boat (Mostly Functional, Occasionally Janky) What You’ll Need (V1 - Above-Water Propulsion): Motor: A2212 brushless motor (other sizes might fit too) Servo: 9-gram servo for steering Prop: 8045 or 8060…

Pobrania
811
Polubienia
103
Ocena
5
P
PrintablesDominik Trunec

Rescue wedge firefighters - Dveřní klín pro hasiče

eng: Wedge under the door that firefighters and rescuers can use. The wedge is modeled directly for use by firemen in traffic accident fires and other activities. The product is used at your own risk (everyone with an ID card knows what…

Pobrania
772
Polubienia
112
Ocena
5
P
Printablescmh

Fork alignment rescue tool

Quickly align your stem and handlebars with the front tire in a accurate-ish way. Place it on the handlebars, get it roughly centered, and use the top groove as a “sight” to center it on the front tire. I saw the original on the Berm Peak…

Pobrania
575
Polubienia
58
Ocena
5
P
Printablesvandragon_de

SAR - Search & Rescue

Let's go on another search and rescue mission. To support this task, I present SAR that is optimally prepared for it. It swims very well and has a small dinghy for direct support which can be quickly lowered into the water. So that there…

Pobrania
568
Polubienia
110
Ocena
5
P
Printablesmattala

RJ45 Ethernet Rescue Clip

I was inspired by the many designs for RJ45 repair clips, but they all suffered the same issue - the retainer part was bulky, fragile and never fitted my oddball collection of cables. They also required supports. The cable tie method fits…

Pobrania
337
Polubienia
53
Ocena
5
P
PrintablesJakub

Rescue stretcher scale 1/10 - Záchranářské nosítko

Scale záchranářské nosítko 1/10 podle předlohy reálného nosítka. Rozměry 218x62x3

Pobrania
333
Polubienia
46
Ocena
5
P
PrintablesDominik Trunec

Function rescue device Holmatro/Funkční vyprošťovací zařízení Holmatro

Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…

Pobrania
332
Polubienia
58
Ocena
4
P
PrintablesHoudiniholm

LEGO Airbus H175 Rescue Helicopter Wall mount

A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…

Pobrania
330
Polubienia
22
Ocena
0
P
PrintablesSurfalex2000

ROTOR PIN for PLAYMOBIL Rescue Helicopter 3845-A || Rettungshubschrauber

I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.

Pobrania
317
Polubienia
26
Ocena
0
P
PrintablesGulfstream86

LEGO DUPLO compatible Rescue Helicopter

A simple and fun helicopter designed to be fully compatible with LEGO DUPLO bricks. Perfect for young builders who love aviation! The model snaps securely onto DUPLO studs and can be combined with other DUPLO creations for imaginative…

Pobrania
313
Polubienia
89
Ocena
5
P
PrintablesJan January

Tire model rescuer 3dsets

opona do modelu rescuer 3dsets

Pobrania
275
Polubienia
56
Ocena
5
P
PrintablesMediaMan3D

Bambu Lab spool holder rescue remix

Updated Nov 3rd: Made the connection between the struts and the base thicker and wider. Changed the orientation of the STL to print on its back. Updated Sept. 8th: Moved threaded inserts to the back side of the stand for better strength.…

Pobrania
252
Polubienia
43
Ocena
5
P
Printablescclontz

Rescue Tow Boat

I loosely modeled this rescue / tow boat on the Carolina Skiff used by our local lake rescue. It came out a little small so I recommend scaling it up to 150% Print two of the canopy supports.

Pobrania
250
Polubienia
24
Ocena
0

Zodiac Rescue Boat

Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…

Pobrania
243
Polubienia
48
Ocena
0
P
PrintablesKatiekat

Megami Device Rescue Joints by PoofyBird REUPLOAD

This is a re-upload of the three Megami Device Rescue Joint file sets made by PoofybirdDesign for Waist, Neck, Chest, and Shoulder joints. I have not personally made these files, so I cannot answer any questions on them, I am just trying…

Pobrania
225
Polubienia
24
Ocena
0
P
Printablesfrankv

CICO Rescue Cricothyroidotomy Trainer V2

This is a modified version of the "CICO Rescue Cricothyroidotomy Trainer - Vortex Approach" by drandybuck... https://www.thingiverse.com/thing:2530474 As per my comments in the original part, I've modified it to make it easier to print...…

Pobrania
220
Polubienia
24
Ocena
0
P
Printableslegobrickman

Airport Rescue Vehicle Set (42068-1)

This is the Airport Rescue Vehicle set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…

Pobrania
216
Polubienia
47
Ocena
0
P
PrintablesoXiVanisher

Grappling hook (to rescue quadcopters from trees)

I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…

Pobrania
216
Polubienia
35
Ocena
5
P
PrintablesAndy Forsberg

Playmobil Rescue Helicopter Tail Rotor

My niece and nephew's Playmobil rescue helicopter had a broken tail rotor. This part is a snap-on direct replacement. You may have to ream out with an appropriately sized drill bit after printing so it freely spins. Print instructions…

Pobrania
206
Polubienia
9
Ocena
5
P
Printablesleonardocatuzo

LATEX RESCUE GLOVES POCKET

LATEX RESCUE GLOVES POCKET

Pobrania
206
Polubienia
57
Ocena
4
P
PrintablesJace1969

Pepper Potts Rescue Armour Revision 2

I was recently inspired by Aarons great work he did on his helmet build that after having looked back at the previous files, I could clearly see that I could improve on them greatly. Hope you like the changes, with additiional smoothing…

Pobrania
203
Polubienia
25
Ocena
0
P
PrintablesGulfstream86

LEGO DUPLO Compatiple Rescue Boat

I designed a Duplo compatible rescue boat for my daughter, and I’d like to share it here. I also created a matching jet ski. If you’re interested in that as well, just let me know in the comments and I can upload it, too. The rescue boat…

Pobrania
172
Polubienia
37
Ocena
5
P
PrintablesSavyNotSavvy

Earring Rescue Charm

The earring rescue charm is a flower with cavities to place an earring into. I've also included the components needed to make your own design into an earring rescue charm. Use these models as negative space to make a spot for your earring…

Pobrania
164
Polubienia
130
Ocena
5
P

LEGO FIRE RESCUE BOAT - Print and play

LEGO FIRE RESCUE BOAT - Print and play

Pobrania
151
Polubienia
35
Ocena
0
P
PrintablesLYOTRADE

Historical wrench (inspired by Hand Tool Rescue)

This is not exactly NASA wrench, but it is also easy to print and you can use it in so many different ways (see complete video below :) If you print this thing, I will be happy to see your make in "Post a make". Print Settings Printer…

Pobrania
150
Polubienia
27
Ocena
5
P
Printableserdnaskram

DLRG Gurtretter - Rescue Tube

Deutsch: Ich habe für unseren OV Schlüsselanhänger in der Form der Gurtretter designet. Ich habe ein Modell ohne Branding und eines mit "DLRG" & "RESCUE TUBE" als Aufschrift (wie im Orginal) hochgeladen. Für meinen OV habe ich statt…

Pobrania
144
Polubienia
12
Ocena
5
P
PrintablesKenPrint3D

Rescue Helicopter 42092

helicopter brick technic

Pobrania
139
Polubienia
12
Ocena
0
P
PrintablesNordheim

Rescue sled for Bruder Snowmobile

One of my boys wanted a resque sled for his Bruder Snowmoibile so I did this the evening before his birthday. The screws needed for assemble are 2x M4x10 with nuts. I printed this one with Petg, 0,2mm layerheight.

Pobrania
134
Polubienia
18
Ocena
0
P
PrintablesSchmelzzone

inflatable rescue boat coastguard

The original model is great, i just simplified it a bit to make it more robust for my little daughter as a toy. I printed the boat on my Sovol SV06 Plus with the following settings: Material: PETG from Sunlu in Sakura Pink Nozzle-Temp:…

Pobrania
132
Polubienia
10
Ocena
0
P
Printablesbillieillib

Rescue Your Glue! - Hobby Lobby / Adhesive Guru 4.5oz Emergency Nozzle & Cap

Summary A professional 2-piece replacement set for 4.5oz Adhesive Guru (Hobby Lobby) CA glue bottles. Designed to rescue full bottles when the original nozzle clogs. Engineered for easy printing and perfect fit. Don't throw away that full…

Pobrania
131
Polubienia
22
Ocena
0
P
PrintablesFoundry K41D

Dummy 13 Rescue Saw

In my latest addition to my line of breaching equipment for your Dummy, please enjoy the breaching/rescue saw. Stubborn, barricaded door? No match. Trapped victim in a car wreck? No match. Need to cut open a roof to rescue someone trapped…

Pobrania
130
Polubienia
67
Ocena
0
P
Printables3D-maker

key chain rescue

prints in 2 colors.

Pobrania
122
Polubienia
24
Ocena
5
P
PrintablesBudwin

Pepper Pots Inspired Rescue Helmet

Pepper Pots Inspired Rescue Helmet Enjoy Category: 3D Printing

Pobrania
118
Polubienia
41
Ocena
0
P
PrintablesRobertusMaximus

Rescue Benchy

Rescue Benchy Sometimes, bad things happen! Even to your Benchy! This is a display that allows you to rescue a wayward Benchy crashed high up on the rocks. So get out there and rescue this Benchy! (Before your neighbors do.) Scandalous!…

Pobrania
118
Polubienia
15
Ocena
0
P
PrintablesJohn

Flash Point Fire Rescue Board Game Organizer Sides

I created these to go in the box with the excellent “Flash point” central organizer by @Hammeredagain_208628 ( https://www.printables.com/model/350334-flash-point ). I have included it and pdf details as an extra .zip file. If you like…

Pobrania
106
Polubienia
19
Ocena
5
P
PrintablesMartin
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
99
Polubienia
19
Ocena
0
P
PrintablesSHR3D.eu

Last Rescue Buttons

[EN] "Last Resort Buttons" - A credit card sized card with spare buttons that can be carried in a wallet. The card contains three different sizes of buttons. [CZ] „Knoflíky poslední záchrany“ – Kartička o rozměrech kreditní karty s…

Pobrania
97
Polubienia
25
Ocena
0
P
PrintablesGakourna

RESCUE CAT token yugioh

HELLO! This is a rescue cat token for yu-gi-oh duel.

Pobrania
96
Polubienia
9
Ocena
0
P
Printableskadous

Rescue knife

I make the rescue knife for cut the car belt. This knife use the firefighters when is it necessary cut the car safety belt. It is possible to use to any other reason. Knife is safety for children use, because the sharp part of the knife…

Pobrania
93
Polubienia
19
Ocena
0
P
PrintablesDed Makar

ADAC Rescue Helicopter

ADAC Rescue Helicopter

Pobrania
89
Polubienia
4
Ocena
0
P
PrintablesZanthrax

Engine bay detail for RGT Rescuer / FTX Outback Tracker

Prints without supports. Minimal painting makes it look a lot better. I used a black marker to hide the edge of the engine bay and servo tape to install the print.

Pobrania
88
Polubienia
9
Ocena
0
P
PrintablesNephlonor

The SELF-SEWING rescue Button printed w/ TPU

This button can be mounted without using any thread or tools. It's all printed in one piece from TPU. Button diameter 15mm, 20mm and 25mm It works without best with coarse fabrics (knitwear etc.). If used with tighter fabrics use a pointy…

Pobrania
87
Polubienia
64
Ocena
0
P
Printables141

Tayo Rescue Station

Simple garage for four cars, built to fit my son's Tayo toy bus. Also has a helicopter landing pad on the roof. I used aligned rectilinear fill options to smooth out the ramp, my print had some trouble with other fill patterns.

Pobrania
83
Polubienia
5
Ocena
0
P
Printablessnillor200

Toilet Paper Roll Rescue

Tired of flat, smashed toilet paper rolls that don't actually “roll” on the rod? Me too! I fixed the problem with this simple print. Just get the smashed roll as round as you can and insert the Toilet Paper Roll Rescue and it will remain…

Pobrania
80
Polubienia
16
Ocena
5
P
PrintablesTorsten Edmonds

RC Rescue Boat

I designed this as a cheap RC boat to rescue my nice speedboat in the event it goes dead in the water. I used a large RC truck servo to rotate the main propeller to steer and have an A2212 brushless motor as the main motor. The chasis is…

Pobrania
79
Polubienia
14
Ocena
0
P
PrintablesFAIR

KPZ/last rescue box

last rescue box (KPZ) is small every day cary box for small survival and medical stuff like small knife, paracord....

Pobrania
71
Polubienia
12
Ocena
2
P
PrintablesMatt Kay

PiP Rescue Truck

Print in Place Fire Department heavy rescue truck. Wheels are based on Fixumdude's but designed from the ground up myself.

Pobrania
71
Polubienia
8
Ocena
5
P
PrintablesCtrl_Alt_Ed

Flash Point Fire Rescue - Fire Engine and Ambulance

Flash Point Fire Rescue Ambulance and Fire Engine to replace the cardboard tokens The slots on these models are compatible with the my custom bases (on my profile) Fire Engine A fire Engine capable of carrying 2 figures 1 Slot for a…

Pobrania
71
Polubienia
22
Ocena
4,67
P
PrintablesPharane0

AWESOMATIX Diff Rescue Spanner Tool

AWESOMATIX Diff Spanner Tool Use it to un-tighten your diff, not to tighten it !

Pobrania
68
Polubienia
2
Ocena
0
P
Printablesnotspelledright

Token Holder for "Flash Point: Fire Rescue" board game

This is a set of token holders for the board game “Flashpoint: Fire Rescue”. There are two holders: One for the fire tokens, which doesn't have a cover because it is the full height of the box One for all of the other tokens, including a…

Pobrania
66
Polubienia
15
Ocena
5
P
Printablesminiellipse

Another Minimalistic Soda Bottle Pontoon Rescue Boat

Rescue air boat for my float plane using pvc pipe, 4 soda bottles(Vezu soda 76mm dia). Note that full throttle reverse may cause the boat to capsize. Program throttle on Tx accordingly. Needs 1/2-inch PVC schedule 40 pipe 45-Degree S x S…

Pobrania
65
Polubienia
30
Ocena
0
P
PrintablesMormoDeVermis

Paw Patrol - Marshall Rise & Rescue water ammo

print with PLA, 0,2mm layer, supports necessary, needs some postprocessing with sandpaper

Pobrania
64
Polubienia
14
Ocena
5
P
PrintablesSteven Phung

Flash Point Fire Rescue Board Game Organizer

A board game insert for the Flash Point: Fire Rescue Board Game. Tray 1: pawns, vehicles Tray 2: poi, heal, hazmat, action, door Tray 3: threat, hot spots, dice, hot spots Player cards and instruction cards go on top of Tray 2.

Pobrania
64
Polubienia
10
Ocena
0
P
PrintablesZen Aku

Power Rangers Lightspeed Rescue Badge - No AMS or MMU!

LIGHTSPEED! RESCUE! Made the Lightspeed Rescue logo badge in Autodesk Fusion (360). The gold base and blue logo are split for easy two-color printing over two separate plates — no AMS needed. The blue logo press-fits into the base. I’ve…

Pobrania
61
Polubienia
9
Ocena
4
P
PrintablesJohn Doe

DJI Mavic Pro water landing float recovery rescue

Too hard for find good version of water landing. Take it. All-in-one. Foam or fully buoy. Base infill - 40%. Buoy/ponton - 5%. Category: R/C Vehicles

Pobrania
58
Polubienia
8
Ocena
0
P
Printablesmethanejuice

TF2 Rescue Ranger (Nerf silly shell blaster)

If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This uses the Breacher + Preacher kit, plus some additional HW on the Rescue Ranger extension: M4 x 20mm SHSC QTY 2 M3 x 12mm SHSC QTY 1 M3 heatset inserts QTY 2 #4…

Pobrania
56
Polubienia
59
Ocena
0
P
PrintablesBlueberry

Petzl Spatha rescue conversion

This little platic piece covers the tip of the climbing knive "Petzl Spatha" in order to reduce the risk of injuries when cutting harnesses, ropes or belts which are wrapped around a human. The protruding part is ment to be placed between…

Pobrania
55
Polubienia
22
Ocena
0
P
PrintablesNikos Kar

Search and rescue basket

Search and rescue basket in 1:48 scale for the fellow modelers Print Settings Printer Brand: Anycubic Printer: Photon Mono Rafts: No Supports: Yes Category: Model Furniture

Pobrania
54
Polubienia
4
Ocena
0
P
PrintablesChristian

Rescue Board Clip for 3dsetsLandy Roof Rack

I modified the Board Clips from the African Trophy Set for the Landy to fit on the normal Roof Rack for Model 4. Now you can clip the recovery Board side by side to the normal Roof Rack.

Pobrania
52
Polubienia
11
Ocena
0
P
PrintablesDed Makar

Canadian Rescue Helicopter

Canadian Rescue Helicopter

Pobrania
51
Polubienia
4
Ocena
0
P
PrintablesNikos Kar

Search and rescue basket

Search and rescue basket in 1:48 scale for the fellow modelers

Pobrania
50
Polubienia
8
Ocena
0
P
PrintablesKj_temmes

RescueBoat

Its a simple and effective rescue boat, easy to build and cheap and easy to handle and drive. No need for super complex electronics etc… Only needed to assembly: Glue and pvc pipe 16mm and some flotation material. Electronics: Some motor,…

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesBen Burnski

Drone Rescue Gripper (DRG) / Universal Grab and Helping Hand

Drone Rescue Gripper (DRG) / Universal Grab and Helping Hand I often fly at a model airfield, and once a week, someone is hanging from a tree or lying deep in the undergrowth. So I came up with a DRG -> Drone Rescue Gripper that can be…

Pobrania
48
Polubienia
25
Ocena
0
P
PrintablesEndersson

Stand for Rescuer from 3DSets

Simple stand for Rescuer car - pins on top of stand fits to holes at battery holder of car

Pobrania
48
Polubienia
8
Ocena
5
P
PrintablesTritschi

Rescue Car (Red Cross) Mercedes for Lego Applications

Cut out inner structure, added wheels with rims and axles, divided the read doors, added hinges, added Red Cross signs, cut out side windows. Added red and blue alarm lights. Maybe good idea for remakers to cut the roof off and print car…

Pobrania
47
Polubienia
6
Ocena
0

3D Sets Rescuer Alternative Printable Tires

This more agressive tire for the 3D Sets Rescuer is printable with the 0.15mm Structural 0.4mm nozzle profile. (Standard suggested settings from 3D Sets) The model is already hollowed out and prints without any supports. The underside has…

Pobrania
47
Polubienia
6
Ocena
0
P
Printablesmilks

Playmobil Air Rescue replacement skids

As per the title, these should fit neatly in place. They require two small zip ties to fasten in place. Print instructions Category: Toy & Game Accessories Print Settings Supports: Yes Infill: 50% Notes: Print for strength, I used 5…

Pobrania
46
Polubienia
10
Ocena
0
P
PrintablesCtrl_Alt_Ed

Flash Point Fire Rescue - Damage Tray

This is a simple Tray for the damage cubes from Flash Point Fire Rescue, taking them from bottom to top in each row starting with the right-hand side shows house Integrity at 75%, 50% and 25%.

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesGeekSculpt3D

Rescue Rangers Monterey Jack Cartoon Figurine

Bring home the biggest cheese lover from the Rescue Rangers crew. This model captures Monterey Jack in his iconic outfit. He’s wearing his sturdy tan trench coat and his signature pilot’s cap, looking ready for an adventure—or more…

Pobrania
42
Polubienia
14
Ocena
0
P
PrintablesZanthrax

Bumper light bar for RGT Rescuer / FTX Outback Tracker

There is a small panel hiding a spot for a light bar in the front bumper. It is held in place by a few small plastic pegs that are easy to cut. The inside of the bumper has 4 screw holes. 4x M3x8 screws should be more than enough to keep…

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesGrogg3D

Paw Patrol Rescue Wheels Chase Power Haulin Cruiser Projectile Ball Net (2 Variants)

With this model, Adventure Bay is safer now with this replacement projectile for Chase's Power Haulin Cruiser. I found a few other projectiles online but I could not find the "ball net" so I made my own. It might not be exactly the same…

Pobrania
40
Polubienia
3
Ocena
0
P
PrintablesThommyfix

Improved dashboard for 3D Sets Mini Rescuer

The dashboard and steering wheel were painted in Prusa Slicer. The colors of the extruders are: 1=blue, 3=grey, 4=red; 5=green ; Extruder 2 is not used. Printing with 0,15mm layer height and PLA.

Pobrania
39
Polubienia
9
Ocena
0
P
PrintablesCtrl_Alt_Ed

Flash Point Fire Rescue - Player Bases and Badges

Upgrades for the Flash Point Fire Rescue board game A simple fire badge, to replace the player cards. A colour base for the mini's to push into (ideal for painted mini's but not needed for unpainted ones) Small bit of tolerance included…

Pobrania
39
Polubienia
7
Ocena
0
P
PrintablesRayner

Rescue my Drums

I created this sign from a photo for my son who is a drummer.

Pobrania
36
Polubienia
14
Ocena
0
P
Printableswotfan69

Multicolor Rescue Rangers Logo Magnet

This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…

Pobrania
34
Polubienia
9
Ocena
0

Rocky and Rescuer Stand

I make stand for Rocky and Rescuer from 3dsets. I use 2x M3x10 screws and PETG, but you can use material what you want. Enjoy it. :)

Pobrania
34
Polubienia
7
Ocena
5
P
PrintablesZanthrax

Mud flap washer for RGT Rescuer / FTX Outback Tracker

Installs using the original screws. Remove bumper first for better access.

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesCtrl_Alt_Ed

Flash Point Fire Rescue Hotspot

Simple hotspot marker for the game “Flash Point Fire Rescue” to replace the cardboard tokens Designed in Tinkercad, Printed on Anycubic i3 mega. Base is 1.5mm thick if you wish to split the process to change colour on a single colour…

Pobrania
32
Polubienia
10
Ocena
5
P
PrintablesJakub

Rescue boards scale 1:10 / vyprošťovací desky

Malé vyprošťovací desky v měřítku 1:10. Velikost L : 35x50 , průměr díry 3,2mm Možnost kombinování s kanystry. Možnost přidělání na zadní držák kanystrů.

Pobrania
32
Polubienia
5
Ocena
0
P
Printablesmmuzikar

Rim extension for 3DSETS model Rescuer

This rim extension is for the Rescuer and Rocky models from 3DSETS and is to be able to use other tires from Aliexpress with a larger inner diameter. Can be mounted on the original rims. It was tested with these tires:…

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesSebash

Dickie Toys Fire Rescue Unit - Inner Ladder

Toddlers play hard and thin material will break if stepped onto. Happened for the inner ladder of the Dickie Toys Fire Rescue Unit 203306000 I got the original (broken) part to take measures and here we go, Mission accomplished, Toddler…

Pobrania
31
Polubienia
7
Ocena
0
P
PrintablesTheBoss3D

Turtle Rescue - Ultimate Pool Game

I created this game because I wanted to bring even more excitement to pool time. Swimming is already fun, but adding a playful challenge makes it unforgettable. I’ve always loved turtles, so I built the game around them - something…

Pobrania
30
Polubienia
26
Ocena
5
P
PrintablesSkyGuy

Bambu Lab spool holder rescue re-remix

TPU feet stay in place without glue, but if you don't want to print the TPU feet, you can use ½" self-adhesive felt or rubber bumper pads in the 2mm recessed feet holes. NOTE: This remix requires 2x M3 brass insets and 2x M3x16mm bolts. I…

Pobrania
27
Polubienia
1
Ocena
0
P
Printablesseasonwarez

Joanna the Goanna - Outback Egg Bandit Rescuers

"These are not Joanna's eggs!" Bring Percival C. McLeach’s hilarious, food-obsessed reptilian henchwoman to your display with this high-fidelity, static-pose figurine. This model is a frame-accurate tribute to the classic 90s…

Pobrania
26
Polubienia
3
Ocena
0
P
Printablesby cadcat

outdoor insect collection/rescue box

Do you have a slightly strange friend who finds injured insects everywhere he goes to rescue them? Or are you this person? No? Anyways. With this box you can safely rescue insects from the roadside and nurture them at home. Or you can…

Pobrania
25
Polubienia
3
Ocena
0
P
Printablesdwbmb

3D Sets Mini 4×4: Rescuer servo arm

Modified servo arm for use with Mini Rescuer. Print with 0,15mm layer height.

Pobrania
24
Polubienia
6
Ocena
0
P
PrintablesMeesterEd

Critter Rescue Ramp Modified For Smaller Printer

I took Critter Rescue Ramp by DuaneIndeed and straightened out the straps a bit to fit my pool and then separated the second ramp from the lily pad and resized it to 200 x 145 x 27mm to fit my print bed. If I come back to this I'll…

Pobrania
24
Polubienia
8
Ocena
0
P
PrintablesShaggyDawg
Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesMANIC 3D PRINTS

Dog Rescue Love – NFC Keychain Set

🐾 Rescue Love – NFC Keychain Set Show your love for rescue pets with this trio of layered round keychains designed for proud pet parents and animal advocates alike. Featuring three heartfelt sayings—“Adopt Don’t Shop,” “My Kids Have…

Pobrania
21
Polubienia
7
Ocena
0
P
Printablesk.makesstuff

Rescue Helicopter Toy Airwolf Bell 222A

Use case, I was asked to create a toy helicopter that could carry a net to be used in toy dinosaur rescues. I couldn’t find a suitable model so I used Ai tools to quickly make a model and modify it to fit. Elapsed design time 45 minutes…

Pobrania
21
Polubienia
2
Ocena
0

Dye marker buoy to use with drones for water rescue

Shapeways and DJI had a contest for 3d printable drone accessories to be used in water search and rescue operations. I had a lot of fun with fluorescein dye, PLA, and 3d printers, and Rhino5. I was a runner-up with a prize of $500 credit…

Pobrania
21
Polubienia
4
Ocena
0