134 modeli
Playing cribbage with three people is so much fun, but most boards usually have space for only two players. To solve this problem without having to buy another board, I designed this to be able to be played with three players. The players…
Wydruk około 18,41 €–22,50 € nettoWstępna wycena jednego wariantu
This folding cribbage board houses a standard deck of cards and has a compartment to hold pegs. Print with 0.2mm layer height. Add color changes as needed, and add a pause to insert the magnets. Any material will do - I used PETG so it…
These include a taper that fits best with 1/8" (3.175mm) holes. Print multiple slowly with flat faces down and good cooling for best results.
I flattened an edge of MoltenLayer's Cribbage Peg for an easy print with no supports. There is a hull base and text for two colour printing using a colour change in your favourite slicer. Use Openscad to customize your name on the peg.…
This is a folding cribbage board that prints with no supports. The inner compartment is large enough to house a standard deck of cards and pegs underneath. I wanted to design a board that was compact and travelled easily. The magnets help…
The IKEA RIBBA frames included wall mounting hardware is about 1 inch deep set into the back of the frame, making traditional hanging with a screw difficult. To make it easier to mount IKEA RIBBA frames, and by extension, canvas prints, I…
I created this drilling jig to accurately drill holes in a hardwood board to make a standard 121-hole cribbage gameboard. The drill holes are sized for a ¼" bit and are chamfered to more easily locate the drill bit. I printed this with a…
This is a simple cribbage peg that I modeled in fusion 360. Print instructions I would suggest printing it on the side, no supports are needed, and use a brim.
Folding print in place travel cribbage board that fits a standard deck of cards and pegs. I designed it for my dad's birthday and figured I would share the love. Files include the .3mf and .stl of the board, set of 3 pegs, and a single…
Cribbage pegs - easily resized, recoloured and updated for any cribbage board!
Fully 3D printable cribbage board. Includes hole with screw-on cover for peg storage (fits six pegs). See below for specific printing instructions... Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes Supports: No Infill:…
Small Printer? I created this remix of @ChrisW_57231 Cribbage Board so that it could print on my Prusa Mini. Instead of a print in place design, the pieces can be printed individually and assembled using a metric bolt with a little super…
This is a two piece design that does not require any supports. The files are only for the blank version. Please post any makes or remixes to this, I have made a few cool team logos that I cannot post due to copyrights!
I designed a travel sized cribbage board for outdoor camping trips. The board comes with a slot for a deck of cards and another cubby for pegs. There is a sliding door that will keep the contents from falling out when carrying. The board…
Support me by checking out OctoEveryWere Here This is a replacement part for your lost or broken Bicycle cribbage pegs Recommended print settings: Layer height: 0.1mm Infill: Grid 15% Speed:100.0 mm/s
Folding Cribbage Board Folded Size: Length - 120.2mm (4.73") Width - 77.3mm (3.04") Thickness- 30mm (1.18") This 3D printed cribbage board is designed for those that want an easy way to take their game on the go. Compact and lightweight,…
a folding three track cribbage board with storage to a deck of bridge size cards and pegs. the peg area is a bit short. feel free to download and modify the fusion 360 file. update: I added .STL files, modified the peg compartment to make…
Changes Version 2.4 Added Length to Filename. Its from inside the lower hook to the top of the upper hook. Should be distance between the teeth of the metal piece on the frame, to the inner side of the frame. Added 100mm Version Added…
A small hook to use a nail or screw, to hang a IKEA RIBBA frame. I’m not quite sure what is IKEA’s intention about the unique designed hook on the RIBBA frame. Anyway, I needed this hook to hang it on the wall in a simple/easy way. It can…
I was inspired by similar designs while Christmas shopping/searching for anchor shaped cribbage boards. I'm using Sneq's more detailed Octopus Stand ( https://www.thingiverse.com/thing:2402131 ) to give it that extra nautical look. (I…
Create your very own YoutUbe play button award with an IKEA Ribba frame, TinkerCAD and 3D printing! What you need: a https://tinkercad.com account RIBBA Rahmen, weiß, 10x15 cm - IKEA Deutschland PLA for the Background White-PLA (or white…
A small game of Cribbage. Down and back twice for a full game. A full line is skunked. 3/8th pegs from amazon. 8x3 magnets used. Pretty tight on the magnet holes, I heat up the bed of the printer and lay it face down to let it relax a…
I love Chris W's cribbage board design. and have made a few. I had a couple issues that I decided to provide a solution to. First I found the pegs a bit small for easy handling so I designed some slightly larger ones. And second the…
Notes: No supports needed when printing Uses (18pcs) 10mm x 2mm magnets Canada Amazon - https://www.amazon.ca/Magnets-Crafts-Multi-Use-Refrigerator-Whiteboards/dp/B0CQR8P3ND/ USA Amazon -…
Cribbage name tags that can be edited using scad The bottom is not flat so you will have to make it flat by reducing the placement height of the model. Made with Openscad 2025.11.03 ----Not polished-----
Made this small french cleat design to fit the Ikea Ribba frame as i use this for mostly everything at home. The wall part fist normal 4mm diameter schrews. for the frame part i used 3x 3x12mm screws. these have the most lenght and are…
I saw one similar to this somewhere, it was a good idea, this has the proper hole sized to use standard pegs since many like there own special pegs when playing, i also attached a box with a lid that is snug enough to stay on and hold 4…
Growing up, cribbage was a game of choice to pass the time. I created this with the idea of being able to take it on the go without having a big board to pack. This board allows for 3 players and is an up and down path for each. The…
This board printout in four parts. the boards and then two snap in place hinges. the board includes storage for 12 pegs and a deck of poker sized playing cards in the box hinges come tin two varieties regular and flat fold. the regular…
Cribbage board designed in Fusion 360. It's a Work in Progress (WIP) and I have not printed it yet… I still need to add a pack of cards holder/drawer and a drawer insert for the pins. The full version as included is 400mm long with 2.5 mm…
This is a hook for Ikea Ribba picture frames. The original hanger is too far away from the wall if there are only short screws/nails available. Print it lying on the side. Different Versions There are different versions. Short: The Hook…
Update 2026-09-27: See my new version for multi-material printers here Folding Cribbage board for 3 players. This will fit a deck of cards in the middle. The tracks are at different heights so you can color the tracks with a simple…
A basic, simple (and admittedly not very elegant) template to define the holes in a cribbage board in OpenSCAD. Main purpose is to be overlaid on a variety of custom boards.
An oversized cribbage peg as requested by a Reddit user. Available diameters at the bottom are ¼", ⁵⁄₁₆" or ⅜" and the height is 2½". No supports needed.
Print this model using Prusa Slicer and a multihead printer such as the Original Prusa XL. Print the model top down. I added a pause in the print job to insert the magnets. I used Input Shaper with .32 structural and didn't have a problem…
adapter to hang IKEA RIBBA with an ALFTA adhesive hook
I was gonna make an infinity mirror based on the 23x23cm IKEA Ribba picture frame. The visability of all the resistors and the contact pads made it look cheap... So I designed these covers to hide everything but the LEDs themselves. There…
The version in the photograph was printed with creality wood-fill filament which worked wonderfully and created the finish I was looking for. Happy printing :)
The IKEA RIBBA frame is so deep, that I cannot hang it with a normal nail. The design by PennybridgePioneer is promising, but did not fit with my version of the RIBBA frame. This is why I made my own design for a wall mount from scratch,…
This is a blank slate of my cribbage board I designed. There are two pieces, a top and bottom and they are held together magnetically by embedded magnets. This was designed to be printed on a Bambu labs with AMS and to be highly…
Ikea, in their infinite wisdom (and more likely their aggressive cost cutting in production) have deemed to make the biggest selling picture frame in the world include a wall hook that doesn't actually allow you to hang it to the wall….!…
An assortment of animal pegs for your cribbage board
I created this drilling jig to accurately drill holes, and rout out the outline in a hardwood board to make a 29 shape 121-hole cribbage gameboard. The drill holes are sized for a ¼" bit and are chamfered to more easily locate the drill…
Keep your old Ikea Frames up to date and in use for many years Replacement to the metallic pegs that easily break when swopping out pictures Solution based on the concept of Ikea PAX system to keep the photoframe secure Uses a short 3mm…
Round cribbage board that can be customized with a round image/logo in the middle. Update: Had to make a few adjustments, should work now. Sorry to the first 3 downloads. I had issues with incomplete boolean operations during compilation.…
This Cribbage board is designed for multicolor printers. I print the base in Red. The veneer is the only multicolored print. I print it separately so that I can inspect the quality before gluing it to the base. I apply superglue along the…
I use a large RIBBA framed picture to hide our unsightly electrical panel. However, it was always really annoying to rehang if we need to access the panel. This cleat solves that headache. It's so easy to hang from the cleat and it feels…
Folding Cribbage board for 3 players. This will fit a deck of cards in the middle. It's just small enough to fit on a standard 200mm square bed. The tracks are at different heights so you can color the tracks with a simple material change…
This is a cribbage board in the shape of Montana! Has the right amount of peg holes and everything
Its a Heart for Ikea Ribba. Print it laying down and glue it in the frame.
I recently bought several ikea RIBBA frames but the mounting plates are far from the wall. I suppose that they are designed to be mounted on plastic adhesive hooks because they are super light. However, I want to change the acrylic for…
Self created FreeCAD file added to make adjustments to fit your needs. Print on side (for rigidity), add supports. See my other models for threaded heat insert mounting bracket
Ikea Ribba frames are terrible for not being able to be actually hung on walls due to the gap between the hanger and the actual wall (go figure Ikea!). This model solves that by allowing you to mount with a single screw and hook perfectly…
Debe imprimirse tumbado para evitar que rompa entre capas, preferiblemente la versión 2 Category: 3D Printing
IKEA RÖDALM/RIBBA Frame Hook Enhance your IKEA RÖDALM/RIBBA frame setup with this easy-to-use, custom-designed hook! Perfectly crafted to bridge the large gap between the wall and the frame rail, this hook ensures a secure and stylish…
Feet to support Ikea RIBBA photo frame stand
Optimized Translation: WordClock 23x23cm IKEA Ribba Project Required Materials: 23x23cm IKEA Ribba Frame If you test it with the HOVSTA frame, please provide feedback. ESP8266 NodeMCU 114x WS2812B RGB LEDs (60 LEDs/m, self-adhesive) 30AWG…
Cribbage board in the shape of Mickey's head. This will just barely fit on an ender 3 sized printer. Be sure to take extra care with bed adhesion. the holes are about the right size to fit a set of colored toothpicks, or you can print a…
As you know, the Ribba frames have a terrible recessed wall hook, which makes mounting them a nightmare. I wanted some wall hooks that could be screwed to the wall securely so I didn't have a untightend screw in the wall. So I made some…
Plastic backing plate that holds the cribbage pegs in place during storage and travel. This fits the most common cribbage board that they sell everywhere (I'll upload a pic). Original plate was too loose and easy to fall out during…
The Ikea RIBBA is a deep frame. My 3m command hooks didn't work with it, so I designed this. Designed to be used with command strips. Use just the hook, or add the optional supports to give it a wider surface area to add multiple strips…
pic1: take empty Ribba frame insert acrylglas in it pic2: lay white paper on it. I use think packing paper. pic3: insert “Frontplatte” and inner frame in it pic4: insert 16x16 led panel…
35x4mm pegs . Neighbor needed some for a homemade board her father had made years ago (they were using round toothpicks) but didn't want the Blue/Green/Red. She opted for Black/Grey/White. She also asked for them to be a bit taller (old…
This is a replacement part for your big cribbage pegs. Recommended print settings: Layer height: 0.1mm Infill: Grid 15% No support needed.
This is a Kraken Cribbage board holder. The tentacles are printed with bronze silk PLA, the rocks with a grey overture PLA, and the Water was a sparkly blue PLA I had laying around. I didn't make the Anchor board, but I designed this…
I LOVE Ikea Ribba frames and Ikea Hovsta ones . But what I like a bit less is the constant pain in the •ss when it comes to hanging them. You need a very specific nail. Not too short (and you can't use most of wall hanging material with…
I needed to hang up a big Ikea RIBBA Picture Frame, using Command Picture Strips. I tried a couple of off-the-shelf designs, but they weren't quite right. So I threw this one together instead. Loosely based on similar designs here and…
Restore your Old Ikea Frames with this universal Ribba Frame Mount Scaled hook ensures frame rests always flush against the wall. Consistant marking distance to top of frame (circa 27mm) Easy to level Fits all frame sizes I secured with…
I bought a few Ribba picture frames from IKEA to hang some prints on existing nails but this was a struggle due to the depth of the frame and the odd bracket that comes fitted to the frame. This little bracket will push up into the metal…
These cheap frames are really difficult to hang because of the distance between the border and the hook. This hook bridges this distance.
Three-Body Problem Themed Cribbage Board. (No Pieces)
Simple small cribbage board and peg. The board is an easy print. The peg, not so much, I finally printed it 100% infill, part cooling turned off, brim on and limited to 50mm/s to get the pegs to turn out. If I were to print a second one…
As a regular cribbage player myself, I thought this would be a fun board to make. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two…
I made a golf themed cribbage board for a friend using these router templates I designed. There's only one like it in the world (which my friend has) so here's your chance to create a (nearly) unique gift for the golfer in your life (or…
Used only the base from the trophy and reshaped/resized to fit the skunk model. Turned out really cute. My color purging was too narrow and I had some color bleeding when printing. The default values will work fine. I only bumped mine…
The Green Bay Packers version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks…
Print inside-colour with crib-pegscrib-pegs Print middle-colour with crib-pegscrib-pegs Print outside-colour with crib-pegscrib-pegs body-1 has a colour change body-2 no colour change peg-tray no colour change
Remixed the IKEA RIBBA Picture frame wall mount by t0ffluss to be a little more simple in design and less to print. Removed the middle frame mounting screw and also removed the large screw hanger for just a simple nail hanger. Category:…
The Minnesota Vikings version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks…
For the lines, I used waterslide decal paper with the attached PDF. I also added a multi-body STEP file with simplified lines for multi-color printing. These are the settings that worked for me with generic PLA on my QIDI Plus4. Crib &…
Overview : My family plays a lot of cribbage, and I’ve designed a lot of boards. I have a hockey stick prototype I made that we travel with. I designed this threaded box to store the pegs with a holder that attaches to the board and holds…
The Detroit Lions version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of…
Modern Ribbed Planter Cover – Minimalist Pot Cover (size M 155 / 115 mm) 🔥 Short Description (very important!) Elegant 3D printable planter cover designed to hide ordinary plastic pots and instantly upgrade your plant display. Clean…
Traditional 60 hole cribbage board. The board (in the uploaded pictures) was created using a single extruder and pausing the print to swap colours. If the Pin Cover is too shallow for your preference, its height will need to be scaled up.
Cribbage This is a cribbage board. Print Instructions I printed it in PETG because that is what I had but PLA would work much better The pegs should be printed on there side for better structural integrity. The pegs will need support if…
The IKEA RIBBA frame can usually not be hung over an EILIF sound proofing wall. Hence, I modified it to fit on either the flat or bumpy side of the wall. Material: PLA, PETG Layer heigth: 0.2mm
Sliding frame hook to fit: IKEA RIBBA https://www.ikea.com/au/en/cat/ribba-series-16456/ Command Large Strips https://www.bunnings.com.au/command-large-white-adhesive-refill-strips-6-pack_p3930051
The UoM version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of 120 holes…
I have created several versions of this and finally got it so that it prints consistently without needing to turn off the fan. All you need to do is some sanding at the end and you will have a great replacement or new marker peice! Design…
Das ist eine Bilderrahmenschablone für den Ikea Ribba Rahmen (13x18cm). Hilft sehr gut bei Ausrichtung an der Wand. Lochdurchmesser für den Nagel ist 2,5mm geeignet für herkömliche Nägel für Bilder. Category: DIY
Grid for 32x32 Pixelmatrix 6mm pitch. Panel: IFH6-32x32-16S ADA1484 Fits in IKEA Ribba 23x23cm Pictureframe. http://www.ikea.com/de/de/catalog/products/00378403/ Has a front hole for IR-Sensor. For: http://docs.pixelmatix.com/SmartMatrix/…
A simple hook for hanging stuff from your RIBBA picture ledges from IKEA. No screws, glue. Just hook it on.
The Chicago Bears version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of…
The MSU version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of 120 holes…
A small cribbage travel set. The space inside holds a single deck of standard Bicycle cards. Each board has 60 slots. The bottom also has a compartments for 6 tapered pegs, included in the design. The upper and lower part are connected…
Simple cribbage pegs that I made for my grandparents, I used 100% infil
This cribbage board is perfect for your favorite computer geek! Inspiration came from a friend of mine who refused to count by 5 (typical in cribbage). He would count by 2's generally. So I decided to make one for specifically for him.…
I have a MagicMirror which is built into a 7x50cm Ikea Ribba frame. I wanted to upgrade the MM with a Grove gesture sensor to control it (PAJ7620U2). But as the frame does not provide any good options, I designed some covers which can…
