1984 modeli
Christmas Tree 4-in-1 We present our latest Christmas decoration – Christmas Tree 4-in-1 ! This model includes four different variants that you can print in various modes to create a unique atmosphere in your home. Tree Variants 1. Solid…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I probably won't use this for my final setup but someone might find it useful. Use the plastic rivets to secure it to the top of the enclosure. I made sure there was clearance. It's designed to be used with the PTFE tubing that comes with…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
Filament Pass-through for IKEA Lack Enclosure Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15%
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
GRAVITRAX ; Wanted to drop the ball through the plate but the height stones are in the way? Now just drop the ball through the height stones, just print your own! GRAVITRAX; Height stone 40 mm with 14 mm diam. hole and roll out…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
This is a parametric design of a hole cover with thread developed in Freecad, and the source code is here: https://github.com/christiangda/3d-printing-hole-covers I used this to configure an Ikea PAX enclosure for my Prusa Mini, this hole…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
For best results, print each piece in a different color. Higher infill will create heavier parts that will passthrough each other better. Works fine at 5% as well. No Support Needed!
Wydruk około 4,05 €–4,95 € nettoWstępna wycena jednego wariantu
See-through spider with just the right thickness (1mm) to be flexible. Decorate your house or scare the kids. Easy and fast print (20min). Print instructions Feel free to scale this up or down but 1mm thickness (z-axis) is recommended.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This pass-through is designed for filament dryers or dry boxes. It consists of a threaded connector combined with a magnetic interface. The threaded connector requires a 0.5” (13mm) hole in the box, and is secured by a nut screwed on from…
Wydruk około 6,82 €–8,33 € nettoWstępna wycena jednego wariantu
There are a lot of filament pass through solutions here on Printables, but I didn't like how they stick out of the enclosure, so I designed these two fairly flush versions. One is for the mid cover part and the other for the edge of the…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: glasses with customizable texts & customizable see-through lens patterns lenses are: interchangable you can print your own pattern using different infill pattern and percentage (see 3mf samples) customizable texts: i prepared 3mf…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Pass Through V2 Wargames Wall - Section 8 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 9,24 €–11,30 € nettoWstępna wycena jednego wariantu
Phone Stand which can be placed on a cable, e.g. behind the keyboard
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Various buildings from the show The Owl House. Ten buildings which surround the Covention Hall . These are the Book Nook, eight non-descript buildings and a tower. Also included is a gate. Each individual building is 20-40mm long, 15-30mm…
Wydruk około 8,86 €–10,83 € nettoWstępna wycena jednego wariantu
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Pass Through Armoured Wargames Wall - Section 6 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
This replaces the center plug for the Prusa Original Enclosure. You can pass the PTFE tube from the Print Head to a dry box. For best, performance, replace the FS-Cover with this one . I used this PTFE adapter for my Sunlu Filament dry box
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Added a modifier to make the top see-thru. Adds no functionality, but it's more fun to look at.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
The parts pass through each other while rotating, creating an unusual visual effect that resembles an impossible object. The smooth motion and continuous interaction make it both satisfying to handle and interesting to observe. Its form…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…
Wydruk około 7,35 €–8,98 € nettoWstępna wycena jednego wariantu
I love the original design, but wanted to be able to see the screen status LEDs better so I added a section to print with a translucent filament. The main body is tool 1 which is the primary color, tool 2 is the section for the…
Wydruk około 7,53 €–9,20 € nettoWstępna wycena jednego wariantu
This flower dice was designed in Fusion 360. I'm making the file available so you can adapt it as you wish. I offer two tolerances between parts: 0.15 mm or 0.20 mm. If you want the parts to slide easily, I recommend the 0.2 mm tolerance…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Created a passthrough for the hinge on the front side.
Wydruk około 2,03 €–2,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Nutcracker for wal- and other nuts. Material : (HT)PLA, PETG Layers : 0.3mm, 0.2mm if you have more time or a faster printer :-) Supports : no Perimeter : 3 should be enough Infill : 30%…
Wydruk około 6,53 €–7,98 € nettoWstępna wycena jednego wariantu
For my Ikea drybox mount I needed a filament pass through for PC4-M10 fittings which don't stick out of the drybox. So I made this model for the 10,6L size Ikea 365+ container for two filament spools. Printed in PLA with 0,2mm quality…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Makes the system leak potentially on the shelf underneath instead of water spreading inside the roof panel. Drill 20mm hole to roof and IP-rated junction box Cut the tube to length Install with generous amount of sealant Print from PETG…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diseñe el modelo con el objetivo de poder tener dos portalápices fácil de juntar para ahorrar espacio, pero que tuviera un diseño lindo y llamativo, me inspire en los juguetes de giro con paso imposible para llegar al modelo, al cual a…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this bike mount to transport MTBs with a through axle securely in a car. Make sure to use additional load securing. The diameter of the hole is 16 mm and the width of the mount is 90 mm. Printed it in PET-G, 0.3 mm layerheight…
Wydruk około 6,64 €–8,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
12HP storage trough for sd cards, USB sticks, guitar picks etc. I had a need to keep some loose things around when I'm playing and this solved the need. Nothing special or complex here, just a hole to throw your stuff in. Enjoy! I hope…
Wydruk około 4,12 €–5,03 € nettoWstępna wycena jednego wariantu
This mod enables you to mount two BondTech BGM Dual drive extruders and a BL Touch probe to a Lulzbot TAZ 1 through 5. (It will also probably fit on a TAZ 6.) This mod also converts the TAZ to use 1.75 mm filament. Print instructions This…
I needed a nice way to get a hole in my rack, to get power from the front to the back of the modules.
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
This was the original description ronsprenkels had for his model: My take on a angled filament feedthrough for my filament drybox. I printed a few others that are available here, none were completely to my liking. So I took the…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I really like this design since I've had all three mmu units. another reason was I wanted an orange label plate since I chose to print my mmu3 in orange like the first one I got years ago. the first one i printed was text up and i feel…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Overview A compact, support‑free hook for hanging baskets, rings, or tools from the underside of a shelf or ceiling. Designed by hakkaisha for people who want a quick, strong, and low‑profile hanger that installs with wood screws and…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
I use this grommet in an unfinished basement with partial drywall walls. Use this if you have access on both sides of a drywall wall Includes fusion360 files as well as STEP I printed with default ASA settings on a Prusa XL. PLA should be…
Wydruk około 0,41 €–0,51 € nettoWstępna wycena jednego wariantu
Wallart - 3 colors: black-white-red
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
I made this remix for usb plug hole in the mini enclosure to use it with the usb mount by https://www.printables.com/model/1003952-external-usb-socket-for-mini-enclosure. Printed in Prusament PETG ultramarine blue.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use this to install 4 Festo plugs on both sides with M5 Inserts. You don't have to put the hoses through the lid. Parts needed: 1x Enclosure Top Plug Edge for Festo + Inserts 8x Festo QSM-M5-4 8x Ruthex Insert M5x9,5 4x PTFE Tube…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The reinforcement allows 2.5mm thick panels to be attached to pillars or similar without bending. The bracket is pressed in firmly and locks securely into place. 0,2mm Qualtity 25% Gyroid Infill
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “Strength Through unity” with a “V for Vendetta” V over strike. This is a 3 color, 3mm high sign. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm and…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
After printing the hydroponics tower and adapting it to live on a 2 gallon bucket, I needed a way to pass the power cord for the pump that lives in the bucket through the lid without a gaping light leak that would encourage algae. 25x20…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple remix of the honeycomb storage wall filler piece to allow for a 3.25mm D cable to pass through it. The pieces sandwich together when installed onto the wall and gently clamp down on the cable.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clips onto the lip of a trough to hold a phone or other small items during an ice bath.
Wydruk około 2,72 €–3,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a passthrough style shed I designed to fit Lincoln Log tracks. It is not based on any particular Lincoln building - the goal was just something that would appeal to young train enthusiasts. I printed in PLA with the default Prusa…
Wydruk około 10,03 €–12,26 € nettoWstępna wycena jednego wariantu
Threaded bulkhead fitting for 110mm pipe, designed for DIY wastewater treatment setups (an eco septic system using IBC totes, but works for anypass-through on a flat-walled plastic tank). Will upload more pictures asap. TWO PARTS: a body…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena jednego wariantu
This is another spiral passthrough fidget. The center can pass through in either direction. Do not scale down and I recommend not to simplify the model. It stands 3.375" (85.725mm) tall. The model in the picture was printed out of ABS…
This is a scaled version of Zagatorz's amazing fidget toy. My friend had printed another version of the spiral passthrough that would break when dropped, so when I found Zagatorz's one with the thick base, I was elated! However, the shape…
What makes it special Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Print settings Infill: 0% - there is…
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
A swim through structure for your fish! Includes: SpongeBob's Pineapple House Squidward's Easter Island Head House Patrick's Rock House Baseplate Instructions: Print the houses and the optional Baseplate glue the houses on the baseplate…
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
An easy-to-print spiral passthrough fidget cone with a small pointy handle. A Quick Note: These fidgets take hours to design. Please consider subscribing to my Patreon to support my work and get access to my full library of designs , with…
Do not forget to visit my other designs: https://www.printables.com/model/1194818-stylish-tissue-box-pillow Update 30.1.2025 - Tight version This updated version includes a reduced gap between the inner and outer parts to 0.2 mm. The…
This spiral fidget toy is designed with two interlocking, twisted cone-like structures that fit perfectly together, offering a satisfying passthrough experience. Each half features a smooth spiral design that rotates effortlessly within…
The Design Since some have asked for other shapes, here is Version 3 of the Impossible Passthrough/ Vortex Thread Illusion with an Octagonal Base This also fits perfectly with Impossible Pyramid Passthrough, Greater Clearances give smooth…
What makes it special I put all twelve of my BEST passthroughs into one download with this V1.1 set. The set covers the original BEST passthrough, the square pyramid, triangle, 4D octagonal pointless, octagonal vortex, rectangle, circle,…
XY Size Compensation on the Inner Piece at -0.4mm
Passthrough Fidget Christmas Tree 🎄 A fun holiday themed fidget toy shaped like a Christmas tree. Easy to print, no supports needed Works with PLA, PETG, or glitter filaments Great as a desk toy, stocking stuffer, or small gift
What makes it special This triangle version takes the BEST passthrough idea into a three-sided shape, and its structure runs smoothly once the pieces are set up right. It prints with a structural design that helps the print go smoothly,…
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
First model i have made in fusion360 after following an online tutorial, i hope you enjoy it! Print in place I gave this passthrough a little more tolerance then most that i have personally tried, this thing glides like butter.
XY Size Compensation on the Inner Piece at -0.4mm
BIG EDITION IMPOSSIBLE PASSTHROUGH FIDGET TOY A BIGGER FIDGET TOY FOR MORE FUN.250MM!!!!!!!!!! WARNING:FOR THE {{{GREEN PART}}} {{{OUTSIDE PART}}} BEACAUSE I HAVE 2 FAILURES WHEN THE PRINT GOES ON 4h30min YOU MUST TURN THE SPEED ON…
I wanted to have an "impossible passthrough" style model that is small so I can print one for everyone in a group, as a surprise present is sturdy works well has maximum possible detail for the size both parts should seem like a full size…
This is a battery door that fits GoPro Hero 9 through 13. Designed so that you can plug in a USB cable while the door is closed. I have personally tested with Hero 10 and others have posted makes showing it is working with Hero 9-13. Make…
I made a pack of metric nuts and bolts. Modify the length in Fusion 360 as needed! Size M3 and up prints well on a Mk3s+ in PLA. M2 and M2.5 didn't print well but I included them anyways. Please note, these will not survive a lot of…
I wanted to try designing an impossible pass through model and decided to use a simple 20mm calibration cube as a base. The tolerances between the parts measure 0.4mm - so it's rather simple to accomplish a working 3d print. Please…
This is the Pear-fect Pass Through Fidget for all the pear lovers in your life 🍐 I designed two styles: a pear with a closed bottom and a pear with an open bottom for the core to pass all the way through.:) 3D PRINT SETTINGS Layer Height…
December 2024 A friend showed me a twisty cone that she liked the look of. https://www.printables.com/model/927393-spiral-cone-fidget-toy The original is too loud for my taste, so I started from scratch in Fusion and found that mesh…
Squares See-Through Bowl - Vertically This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from above, the intricate latticework reveals a captivating…
XY Size Compensation on the Inner Piece at -0.4
Model Description Introducing the passthrough Easter egg, a special 3D creation that combines the charm of a festive decoration with the practicality of a fun fidget toy. This model allows for endless creativity with customizable color…
I designed these three fidgets that are interchangeable. Let me know if you would like any other shapes. NON-COMMERCIAL USE ONLY
What makes it special I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is…
XY Size Compensation on the Inner Piece at -0.4mm
To print these designs, you can use your regular slicer settings. All the models are pre-oriented and can be printed without supports. Print them in two colors of pla/petg to achieve a stunning two color effect, or do a few color swaps at…
The Design Here's a new Tall mini version of the impossible passthrough! Fully Compatible with the V2- Mini Vortex Thread (see end of gif) The “male” part of the thread seems to defy physics by passing through the slightly larger “female”…
Just another passthrough fidget cone… Find other PASSTHROUGH FIDGETS from us. Enjoy and have fun! Material: PLA Layerheight: 0.2mm (or better) Infill: 15x
This a more rough textured palette which could be used for dry brush to dial in the right amount of color before using it on your miniature or other things you are painting. Maybe it is useful for you too. Palette is about 160x120mm.…
XY Size Compensation on the Inner Piece at -0.4mm
Introducing the Chess Rook with a fascinating passthrough illusion! This model appears to defy the laws of physics as the "male" part of the thread passes through the slightly larger "female" part. This effect is not only visually…
Allows PTFE tube to run through printer frame for use of lid
I roughly based the aircraft off of the American F15 Strike Eagle.
Feedthrough connector for WAGO 221-411 connectors. Perfect for going entering enclosures or going through walls with cord with up to 3 wires. There are three options of entering the connector from the “outter side” Corrugated tube…
Safer, Tougher and Easier to play with than other designs Here we have the Pointless Impossible Passthrough Cone. This has been specifically designed to be easier to play with There are no pointy parts on this design and its much less…
Visit my latest design and give it LIKE! https://www.printables.com/model/1063874-rest-charge-mobile-holder Dive into Halloween spirit with my newest 3D model, the "Halloween Duck - Passthrough." This spooky bath duck, originally designed…
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
The Design Back by Popular demand with a Mini Pyramid Passthrough. Compatible with the rest of the V2 Series Now in the shape of a 3 sided pyramid (a tetrahedron), The “male” part of the thread seems to defy physics by passing through the…
The Design After something different? Here we have the Vortex Shift! This is the most confusing and satisfying yet! Whilst i designed this some months ago i took some time to refine it and get it perfect. Import note: Whilst fully…
A twist on the famous Moai statues on Easter Island. Use glue stick when printing. Also needs support. I used tree supports with 30 degree threshold angle from build plate only. Remove small overhangs.
