DOOM Eternal Rune Coaster 2
Vectorised rune from the game. Two coloured print, red is original, but feel free to experiment.
- Pobrania
- 825
- Polubienia
- 194
- Ocena
- 5
378 modeli
Vectorised rune from the game. Two coloured print, red is original, but feel free to experiment.
Valknut symbol with runes - Two models diameter approx. 100mm Printing: Supports: NO Layer: 0.2 mm Filament change at 11th layer
Beads with all Futhark-runes plus the trinity knot. Prints without supports. Hole diameter: 5,5mm
This is a moving spinnable version of the quest marker icon from the MMORPG ‘Runescape’ made by Jagex. Introduced in the quest ‘Ancient Awakening’, The new in-game spinning quest marker was far easier to see and use. Reddit users were…
An insert for Shipwrights of the North Sea and runesaga just because there is space in the box. Fits sleeved cards
I received a long-reach prune tool from a family member but they did not have a pole/stick to mount the tool on. I could not find anything that would fit that prune scissor tool, so I made one. Not sure what the brand of prune scissor is…
This is a remix of the cable management chain for the Elegoo Neptune 3 PRO printer. I recommend downloading the .zip file ! and read notepad ! I recommend printing .3mf Please read the assigned notepad. The upper X chain is not needed. It…
MR (ANT) TENNA FROM DELTARUNE
Modified model tool holder for Elegoo Neptune 3 PRO For use of the upgrade with chain. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 20% Filament: AURAPOL PLA BLUE…
Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!
Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a one more Chapter 1 print left, and then I'll get started on Chapter 2!
The runes are approx. 30 mm in diameter. Single files for each and a file for whole set. The whole set fits on a 200x200mm build plate with 10 mm empty space on edges.
Printable Mehrunes Razor from The Elder Scrolls Skyrim this is the larger version at 16 inches/406mm.
Viking runes - Elder Futhark I designed all the known Elder Futhark runes. At the moment the height is 3mm Set the layer height to 7mm if you want them to be “symetrical” I will soon upload a “key ring - trinket” version and maybe “ear…
Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!
Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!
This is a stack of gold coins from Old School RuneScape.
A Runescape Party Hat Category: Video Games
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
Using the "Parametric Cherry MX/Alps Keycap for Mechanical Keyboards" as a template I created some keycaps that resemble some of the Runescape icons. The idea behind this is that it lets you easily see which function key is assigned to…
A simple chute to collect those delicious filament poops from the K2 Plus. This is practical if you have access to the back of your printer and don't want poop all over the floor. It's made to be easily removed and emptied without any…
This is a remix of the Dice Code Box by MAKR. Changes I've made: Adapted the outer ring to include the rune markings. The runes are recessed by .4mm and print well at .12. Originally I was planning to have the runes go right through, but…
if you want to use these commercially I recommend checking out Jagex's post on it: https://www.jagex.com/en-GB/terms/fancontentpolicy
These are the runes of the runeword Enigma "Jah - Ith - Ber" from Diablo 2.
The design features deep-relief runes and the central Vegvisir symbol. the symbol is intended to help the bearer find their way through rough weather. Because of the uneven surface on these coasters, sweaty glasses will not stick to them…
This "Runestone" drink and coffee cup coaster is richly decorated with ornaments and runes from Celtic culture. It's easy to print and looks simply stunning. The model is printed face down. The default dimensions are: 90 mm x 90 mm x 10…
The sword is created based on references from the game. if I made a mistake somewhere, I apologize. I hope you like this model and if you want to thank me, I will be grateful.
Printable Mehrunes Razor from The Elder Scrolls Skyrim. This version is slightly smaller at 13 inches/330mm long, this allows it to be printable on the Prusa Mini's smaller print bed.
Exported from runelite, patched, and modified for 3d printing. All parts should print without supports, though depending on the printer you may need supports for “cannon base” I print with 2 walls and 5% infill. CA glue to join all pieces.
Mehrunes Razor dice holder inspired by the Elder Scrolls Game series.
🇧🇳 Selamat datang ke Brunei! Welcome to Brunei! This model was created in Tinkercad by Dany Sánchez . (!) See the print details & instructions below. Brunei is a small muslim country in the large island of Borneo, in southeast Asia. It…
The Vegvisir, also known as the runic compass or the Viking compass/Nordic compass made of eight Viking rune staves, is a symbol of protection and guidance believed to be used as a compass by Vikings. The word vegvisir means ‘wayfinder’…
These were thrown together in a very short time period to create a cosplay for a (at that time) 3 day old character, Tenna. The cosplay was a hit at Phoenix Fan Fusion 2025. Included are the STEP and Fusion files if you want to modify.…
Pick your favourite runes :) Air Fire Nature Law Blood Water Cosmic Earth Death Chaos Astral Mind Body Soul Wrath
I wanted a cute statue of light furred Ralsei, but I couldn't really find anything to my taste online, so I modelled this little guy. The peg for the stand was only sort of guessed in blender, but it fit neatly in my test print, so…
Included here is a full set of the Elder Futhark Runic alphabet carved into 24 unique hand modeled and etched runestones, as well as a set of 22 unique blank runestones for risting your own, or making custom game-pieces (mahjong,…
It's the Deltarune from… well… Deltatune, in keychain form! Can pretty much be printed in two colors on any printer, just add a stop in the slicer at layer 14 for a .2mm layer height and switch out the filament.
Created this model of the Roaring Knight from Deltarune , and just wanted to share it. A shame that Deltarune has so few 3D models—on any site, for that matter—so I hope it's a worthwhile contribution on my part. If all goes well, I plan…
Avalanche, Great Fireball and Sudden Death runes from the MMORPG Tibia by CipSoft. With optional hangers.
Elder Wand This wand is printed in 5 pieces and screwed together. There are 2 versions of the middle piece, one with runes inscribed on it and one blank for custom inscription/painting. I actually made this model in 2018, but just now got…
! ATTENTION ! I've added the models separately for better control, different presets, and faster pick-what-you-want :) Runes can be expensive, and when starting out (or for collection), this is a good substitute. I have wanted to do this…
I designed a 3d printable model of Lancer making his iconic face after joining your party in Deltarune. after realizing that there was nowhere you could download a 3d model of lancer making this specific face I took matters into my own…
Model is about 1.5" long. “rune1 acceleration” is the main rune Jayce has on his bracelet, and the others are shown in season 2. Printed with clear blue PETG, but can also be printed with PLA. All 8 can be printed at once.
It's really just an alphabet substitution, but in the end I still like the look. (The cover photo shows qwerty layout, fyi) The logos are 1 mm raised, and I intend to resin print them in transparent so I can mask them off, and then paint…
Vectorised from the game as cleanly as one can. Slowing down print speed helps the circumference letters/symbols print better.
Runebound 3rd edition insert with enough space for all the expansions and compatible with sleeved cards. It is designed for for combat tokens in capsules (29mm interior diameter) You need to print one of each except: Combat_Tokens_x15:…
Original model by VibaPop : https://sketchfab.com/VibaPop Great thanks to @OscarTbatt for preparing and sharing the model. Here comes the awaited remix, bringing ease of printing in multiple parts. The resulting mini stands at around…
CREDITS TO @JOHN9DOE1 ON X THE EVERYTHING APP FOR THE MODEL! (I posed it but he made the model of the character) CREDITS TO DELTARUNE / TOBY FOX FOR THE GAME When you import the model into your printing software, it will most likely says…
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
THAT’S RIGHT! NOW’S YOUR CHANCE TO BE A [[Big Shot]]! Glue pieces together when done printing.
A thornring for Noelle, can be scalled up at will. This needs tree supports for the spikes, Made with PLA
Hole size: 5mm Print time per bead is around 15min. Any questions or feedback ? Dont hesitate to reach out. Thankyou!
The Deltarune, turned into a pendant! SVG Source: https://svgur.com/s/9Hx
Use min 50% infill or light are gonna light through wall I use lights with usb cable for best effect like it's glowing obviously, just round about walls and you are done Maybe you can use lighter and do little burn marks for effect but i…
I want to make an rs3 version of this too at somepoint. The Rune Scimitar is an iconic weapon from Runescape. Haven't printed this yet, so unsure how it comes out. I know there is someone else's model on here too. There are slight…
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
The “Connection Lost” message from RuneScape. To match the in-game appearance, start with black filament and switch to white when letters begin to print. Beware of scaling down, because I got poor results slicing with Cura 5.1 on the…
Eolh (Liferune) with ornamental viking Design.
Perhaps your adventuring party needs to activate some ancient runes. Perhaps they need a meeting place. For whatever roleplaying purpose I have a nice chicken nugget-shaped runestone for your party to be intrigued by! Roll to investigate……
I designed and printed this chess set for someones birthday and I have not played runescape in the past so the pieces may not be 100% accurate since there arent many clear reference photos on the internet but I did my best. This model…
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
This is a remix of Targ 's Baby Sword Rattle , with embossed Norse runes added to the blade. They spell the name of the name of the baby this gift is for. I only added to the design of the blade. The other model files and detailed…
these are 4 keychains each based of a different rune in the legend of Zelda tears of the kingdom (TOTK) including ultra hand, fuse, ascend and recall. These keychains can be used on a bag, set of keys or anything else. (keychain equipment…
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
Added some extra material to the right arm (had a tendency to break off) and thickened the antenna. Also made a version with a keychain hole cutout. Category: Food & Drink
use petg filament and tree supports work the best if you are scaling the size down dont go past 80% or else it will break or 100% mess up use a 0.4mm nozzle for the best results you can use 0.2mm too it will take very long tho DELTARUNE…
Deltarune Symbol in 3D. 0.4cm high.
Nothing special about the print - default settings Just choose the 2 or 3 millimeter version, depending on what pen you will be writing with The futhark is a 16 letter Viking alfabet Rune converter can be found here (choose Long Branch)…
Runescape Law Rune coaster
I made this coaster set and holder for a Reddit secret Santa a couple of years back. When I uploaded it the first time, I did not have a base on it because I just used the pieces to make it. I have now added a base for a print-in-place…
A dwarf mage with long beard glowing with carved runes, holding a floating stone tablet.
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
Disclaimer : This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…
A high-detail, realistic female figure captured in an elegant swimsuit pose. This Beach Edition focuses on smooth anatomy and a serene, beautiful aesthetic. Perfect for figure study, art collectors, and those seeking extremely…
EDIT: Wow, printables apparently removed a lot of the attached images in the description and the ENTIRE zip file of the model files. I have no idea how that happened or how long this post has just been a preview mode, but THE ACTUAL FILES…
The Classic Runescape Bot/generic player model Category: Video Games
To pair with my previous upload, I decided to make a Susie model! This is now ⅔ of the fun gang done! The scaling in the slicer is a bit weird, you may have to size it to your liking yourself. I plan to upload a Kris model soon as well.…
This minimalist wall mount holds a Dewalt cordless battery powered pruner. The screws go through the mount point so the tool is secure, can print with petg / pla doesnt matter as long as your screw is into something sturdy.
A dwarf warrior with heavy armor, hammer raised, and runes engraved on his chestplate. One-piece figurine with a stable base, optimized for 3D printing without thin or fragile details. Model was tested in Orca Slicer for printability.…
When one costume comes with a wand and the other doesn't, my little witches will complain. Modeled after the wand that came in the costume so there would be no arguing over which witch's wand was wonderful! print with long side down…
get you lil sponge, he can do all kind of wacky poeses, errr, well, there's kind of of a limit but still he's cool plus no screws required. sword a and shield included. infill : 30 % supports : probable a good idea filment : petg or pla…
$11 platform designed to fit in the hands of the rave crab model that is included here which was not made by me. Crab Rave model is by Tahu505. You can find the original by searching "crab rave tahu505" on Google or your preferred search…
l wanted runes for my Wolfspear, so after looking around I went to the Sones of Vikings Website - https://sonsofvikings.com/ and decided to create runes based on the 'Elder Futhark' -…
Camera case for a pi cam with IR blasters. Took inspiration from the great setup that kevinlo designed, however this was designed from the ground up to exactly fit my model of the pi cam, link to Amazon below. This model of the pi cam has…
Angelic rune with the effigy of the series Shadow Hunter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 5 Filament: PLA black Instagram: @roiku3d
Very simple runestone made for miniatures. I suggest to use Filament printer and slap some modelling textures like Citadel Stirland Mud / Astrogranite. Don't forget to add moss effects. If you have any suggestions, let me know. I can do…
Ender 3 - Stealthbruner X carriage for MGN12C linear rails. The originial has holes for full MGN12, this is for a MGN12C. Moved the holes around a bit, they are 15mm instead of the 20mm of sepratation they are the same distance apart in…
Rune and emblem frame is separate, glue them together after printing.
This is a standable plaque based on the "deltarune" symbol from Toby Fox's indie game DELTARUNE. The version in my make is made using black and white on a Prusa XL (although the file provided is sliced for a MK4S.) Note : for those who…
Runescape Nature Rune coaster
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
Rune dice tower Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Fantasy Items here: https://www.printables.com/@StudioMechanik/collections/2975356
A 3d figurine of the Shadow Mantle holder from Deltarune. Inspired by the Deltarune figures at Fangamer. please share your makes!
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
Hello All! Here is a OSRS Dragon Warhammer model that I created. This model is not an exact replica of the in game Warhammer but a homage to the item that is easier to print. I created this model in many pieces that all link together with…