3882 modeli
Please click if you appreciate my work :) The power of a classic meets rebellious tuning – presenting the RWB Porsche 911 (964) Turbo as a wall-mounted 3D print. This model embodies the aggressive style of Rauh-Welt Begriff, reimagined as…
Wydruk około 12,80 €–15,65 € nettoWstępna wycena jednego wariantu
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
I created this modular drawer organizer to maximize space in my drawer as compared to a store bought one. The total length was too long for my ender 3 print bed so each tray is split in half and joined together using a piece of 1.75mm…
Wydruk około 7,76 €–9,48 € nettoWstępna wycena jednego wariantu
I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
Hier das Feuerwehrlogo für Colorchange Farbdruck. The german firefighters logo for colorchange.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print this spooky snap together spiderweb napkin holder for your Halloween party table. Print 2 sides and 1 bottom, then snap them together. If the sides are loose you can use a bit of 3d Gloop or glue for a secure permanent assembly. If…
Wydruk około 4,28 €–5,23 € nettoWstępna wycena jednego wariantu
Further enhancing my custom silverware tray for my Knork silverware, I made it modular. Mostly this was so that I wouldn't have to reprint the entire organizer if I chose to change the layout of my drawers at all. I have uploaded all…
Wydruk około 12,95 €–15,82 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Schlüsselanhänger für alle Feuerwehr-Fans egal ob groß oder klein. Am besten zweifarbig drucken ;)
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Support me :: Please consider donating any amount as you see suitable to help me create more content and keep sharing it for free. Info :: This was a request from Koppa to (re-)create a model of the Mosby stasjon in Norway. We give this…
Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu
Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact, customizable silverware insert for narrow drawers. This particular design fits perfectly in the drawer of a friend's Escape 19 RV trailer and precisely secures their silverware set. The design was very simple to draw up. I…
Wydruk około 10,54 €–12,88 € nettoWstępna wycena jednego wariantu
This is a 3D printable model of a Tupperware bottle, based on a scan from a real bottle. It is available in two sizes: regular and small. The small version has a ring loop so you can use it as a keychain.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Silverware holder for dish drying rack. Air holes made square to avoid overhangs and bridging. The ‘hook’ on the back needs support. The support is included in the gcode if your printer is similar enough to a Prusa MK3. Made it so that I…
Wydruk około 8,74 €–10,69 € nettoWstępna wycena jednego wariantu
I printed it from PLA, and it is a tight fit, but it works. I'm also planning on printing it in ABS too, because it is less rigid. TPU would be the best, but I don't have that for now. I recommend drastically reducing printing speed…
Wydruk około 3,03 €–3,71 € nettoWstępna wycena jednego wariantu
I needed a simple grip that would enable me to use the Kindle one handed including page turning. After a while holding the kindle, it slips from my grasp especially when reading at night. Whilst a side to side grip would be easier to…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
I wanted to build a silverware tray that had all of my utensils single-stacked and arranged as close to the front of the drawer as possible. Supported utensils, with dimensions (total length x max width) Utensil Max Length (mm) Max Width…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
Minnesota Timberwolves
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Brändi Dog Erweiterung für 3 Spieler - das Brettspiel wird eigentlich immer zu viert gespielt. Mit dieser Erweiterung kannst du das Spielbrett auf 3 Personen anpassen und zu dritt - alle gegen alle spielen. Print Settings Printer Brand:…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Wydruk około 11,26 €–13,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand to dry Tupperware bottles from 310ml up to 1000ml. Can be linked together. Print Settings: Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: PLA
Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu
This nozzle is to make DM Air Freshener refill work in an Airwick auto dispenser. It is made with conically narrowing inside, to make it dispense the aerosol as best as possible. It can even replace the original Airwick nozzle on an…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
I had an Anker PowerWave wireless charger A2503 lying around that I didn't need. That's why I developed this phone holder for my BMW F11 and Samsung S20 Plus in a Spigen Tough Armor case. I like the inductive charging. So the wireless…
Wydruk około 8,76 €–10,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In our rotational Cutter from Tupperware the gear which transports the force to the knife's broke. So i designed it as close as possible to the original one. Fiirst i printed it in PLA but it not last for a very long time. So i decided to…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
English see below. Es gibt nun auch ein Variante für flache Straßenschuhe, siehe Remix . Ich habe mich immer darüber geärgert, wenn ich unterwegs nach einem langen Marsch oder einen Lauf im Regen feuchte Schuhe hatte. Im Hotel findet man…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D model captures the essence of the iconic Tupperware tumbler in a keychain-sized collectable. Designed to perfect scale, the model features the tumbler's signature details: Sleek, rounded body: The familiar silhouette of the…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Wydruk około 3,05 €–3,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ständer für Handschuhe, dadurch lassen sich gerade die Torwarthandschuhe sehr gut trocknen und lüften!
Wydruk około 10,32 €–12,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: This is a dock I have designed for our ABC Design Stroller “Salsa 4” or better said for the carrycot that is part of the set. I wanted to build a table for the living room with the docks attached on the top to easily use the carrycot…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Show your love for the iconic Tupperware Salad Bowl with this adorable keychain! This meticulously designed, miniature replica captures all the details of the beloved container. Perfect for Tupperware enthusiasts, collectors, or anyone…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Blood Group Keychain (all types) + Your Information Text / Brelok z Grupą krwi i informacjami do kontaktu. A+ , A-, B+, B-, AB+, AB-, 0+, 0- Below are videos on how to edit the inscription on the back of the keychain How to ADD any Text…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I offer a set of parts for holding the phone more securely. New parts are fully compatible with original parts. The presented set includes two arm.stl options (for a large phone in a case and for a thinner phone) and two options for the…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Wydruk około 5,09 €–6,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tupperware Quick Chef Replacement Gear and Adapter (3D Printed) Lost or broken the gear for your Tupperware Quick Chef? No worries! We have the perfect solution for you – a 3D printed replacement gear made from durable PETG material. This…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für Rundmagnete 8 mm x 3 mm
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen
Wydruk około 2,31 €–2,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little box for four sugar cubes. I designed it für cubes in the size of 16 mm x 16.5 mm x 11 mm. I uploaded also the *.f3d file, thus you can adjust it. You have to print it twice.
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
A magent sized 30x30x6,89mm with the logo from a german soccer club (Rot Weiss Essen). In the BGCODE is a pause for a 15mmx2mm magnet and a colour change at the end for the logo finish. Printed on a Prusa Core One
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Gedruckt in PLA mit MK4
Wydruk około 7,60 €–9,29 € nettoWstępna wycena jednego wariantu
This model is a great way to organize all of your silverware items!
Wydruk około 23,83 €–29,12 € nettoWstępna wycena jednego wariantu
variable angle phone holder (needs m4 40 screw)
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5 slot Silverware Tray for a 215mm wide drawer. Fits Prusa MK4S Bed barely! Printed using Overture Black PLA. Tray itself is 248L x 208W x 75D in Millimeters. Height can be scaled down in the Z to achieve desired depth. Mine was printed…
Wydruk około 16,54 €–20,21 € nettoWstępna wycena jednego wariantu
I think the model name says it all just snap it on and slide the attachment in and you're done.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Farberware vegetable peeler part that holds the blade. The old blade is use in the replacement part and a pause in the g-code allows the blade to be inserted into the part as it is being printed. The…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I didn't use any of the original model for my design, though I did reference it to apply the same shape as it's a good logical approach, so hat's off to the OG! I did make a couple of changes. I wasn't a fan of the boss/pins for one end…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ausschnitt/Relief der Stadt Bigge/Olsberg - NRW - Germany
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
Vogel-Futterhaus mit Auffangschale. Da die Vögel oft eine ziemliche Schweinerei ums Futterhaus machen, kann hier eine Auffangschale angehängt werden. Oft ist das Futter qualitativ noch einwandfrei und dann darum wieder eingefüllt werden.…
Wydruk około 17,87 €–21,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gusset for repairing Volantex TrainStar motor wall. If you broke it in this place , just print this gusset and glue it with CA glue! If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A bumper for Adafruit's FeatherWing Quad 2x2.
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
Millennium Falcon Scale 1:500
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Cute spider on a web in the corner on his print-in-place web. Space for (4) 12mm (1/2") magnets to stick to a metal door frame, or just tape/command strip in place. Mine also stuck to the metal corner beads of unframed openings at my…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Fan made Star Wars chess set. Made with my students in class (grade 8). We used existing models we found online to create chess pieces out of them in tinkercad. Some are exceptionally good, some could do better. But somebody else might…
This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Create your own DT series Sentry Droid and take over the galaxy! Description: This is a KIT CARD of a DT series Sentry Droid. After a long time I felt like designing a kit card again. This will be a great gift for friends who love Star…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
Tupperware lid holder for 12 lids.
Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…
This is a customizable silverware holder that fits your specific silverware like a glove. No more sloppy generic buckets. As an added feature, it can stack with other gridfinity modules to make even better use of the drawer space. Note:…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
''I'm a one-man apocalypse.'' I present you Roadhog in his tuckered out emote pose. Roadhog is one of the heroes in Overwatch. He is a bodyguard and an international criminal who is infamous for being an unforgiving cutthroat with a…
Model of the Elder Wand from the Harry Potter series. This is a 2-part wand which goes together without magnets or glue. The joint isn't noticeable. The assembled wand is 15" / 38cm long. .02mm layers 2 walls 15% Infill The print profile…
The Unicorn of the sea now comes you a printer near you! This cute little narwhal comes in three different styles: Alone - They are just out here catching some sun living their best life On a rock - Relaxing on a rock trying to do their…
MechWarrior Online Timberwolf, roughly 130mm tall. Fully articulated, and tested, all parts should be 100% printer friendly and error free. Most of the joints are the same as the Articulated MWO Timberwolf by 7Fish (…
this whistle contanis major improvements compared to my V29.1 whistle. please be careful and use it responsibly. The whistle responds very easily due to an improved labium. It provides lesser air consumption aswell I built in reflectors…
This is one of the toroidal propellers we've tested in this video: https://youtu.be/w90gM7bGdvk This is the right propeller. To get the left version, simply reflect it in the slicer. We've achieved the avg max speed of 2.26 m/s, at 1079W…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
Good results without any support-structures. Print needs 25h with a Creality Ender 3 S1 Pro and 60mm speed (via Klipper). Because of the enormous number of edges, you should do some fine-tuning in optimizing the speed at corners and the…
Summon the Spirit of the Frozen Sea – the Arctic Narwhal! 🐋🦄❄ Rising from the icy depths beneath shimmering auroras, the Arctic Narwhal glides silently into your world. With its elegant spiral horn and smooth articulated body, this…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Thanks Black Tie, that worked a treat ; ) Hopefully this is what your after : ) I sharpened one with more defined lines and left the other smooth, so your choice : ) As always check the sizing suits your needs and post some picks if you…
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
A while ago I saw an extruder indicator consisting of a hamsterwheel and a silhouette of an hamster in it ( https://www.thingiverse.com/thing:3139180 ). I re-designed the wheel from scratch, took a pikachu model from Thingiverse (…
Erweiterbares Model von ikea Skadis. Durch eingeschränkte Druckgröße habe ich das Ikea Skadis als erweiterbares Model erstellt. Man kann den Skadis Organizer so lang wie man möchte machen. Benötigt mindestens jeweils 2 x Ecke 1 2 x Ecke 2…
Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…
This group of models was inspired by Gridfinity_1x5x6Utensil.3mf by clarkwgriswold on Thangs.com. His did not fit my silverware well, I wanted more depth, and his only had a fork/spoon holder - I wanted a whole set, so I designed my own.…
Tesla Cyberwhistle with actual whistling action. Not the most efficient or loudest whistle you've ever used, but it works. Calling this the “Twhistla” after Simon Giertz's Truckla Tesla car conversion.
Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…
English: Expandable pot lid holder. Each print is for 2 pot lids. There is a start piece ("Topfdeckelhalter_Anfangsstueck.stl"), a middle piece ("Topfdeckelhalter.stl") and an end piece Length: 131mm Width: 140mm Height: 100mm Towers…
Shelf/holder for Dyson Airwrap. Can be used as a stand or hung on wall.
Spiderweb Layered Fidget 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill No supports needed, print in place. Dimensions of Spider Web Layered Fidget: 4 in. in diameter x ⅞ in. tall I do not recommend scaling the…
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
