Wyniki wyszukiwania: s5

Sortowanie

1541 modeli

P
PrintablesMatt-G

Playstation 5 (ps5) horizontal stand

one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…

Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu

Pobrania
21 540
Polubienia
1775
Ocena
4,89
P
PrintablesJon May

Playstation 5 (PS5) Digital Horizontal Stand

I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…

Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
9108
Polubienia
777
Ocena
5
P
PrintablesMatt-G

Playstation 5 (PS5) horizontal stand minimalistic version

Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…

Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
4493
Polubienia
371
Ocena
4,94
P
Printablesjcjames_13009

Festool TS55 REBQ dust cover

I designed and 3D print a dust cover located on the right side of the curricular saw that makes the dust extraction much more effective Starting from another similar project , I designed the same part but adapted to my TS55 REBQ version.…

Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu

Pobrania
2209
Polubienia
259
Ocena
4,88
P
Printablesjcjames_13009

Festool TS55 anti-tilt stops

This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…

Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu

Pobrania
2156
Polubienia
368
Ocena
5
P
PrintablesTrajan

Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)

This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…

Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu

Pobrania
1086
Polubienia
132
Ocena
4,86
P
PrintablesSp1y3rS

Playstation 5 Dualsense x2 and Headphone PS5 Clip

Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset

Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu

Pobrania
861
Polubienia
109
Ocena
4,86
P
PrintablesPassforce

FPV PS5/4 Simulator

FPV stick Simulator PS5/4 FPV stick for PS5/PS4 controller. Inspired by Taranis QX7 stick I advise to print with supports on the plate

Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu

Pobrania
825
Polubienia
108
Ocena
5
P
Printablesgwendal

Festool TS55 non-swivel dust port to 36mm cleantec connector

Replacement adapter to 36mm cleantec hose. It does not swivel, preventing the hose to get stuck on the rails. The side panel of the tracksaw needs to disassembled to install the new adapter.

Wydruk około 2,79 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
717
Polubienia
77
Ocena
4,8
P
Printables3DDIY

Festool Track Saw Kerf Jig for TS75, TS55 and TSC 55K

This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
571
Polubienia
102
Ocena
4,86
P
PrintablesMart80

Simson S51 Motor

Simson S51 Motor zum drucken. Der Motor kann auf die gewünschte Größe skaliert werden. Viel Spaß beim drucken :-)

Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu

Pobrania
546
Polubienia
34
Ocena
0

PS5 Controller and Headphones Stand

Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…

Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
501
Polubienia
81
Ocena
0
P
PrintablesMaselovic

PS5 Headset Hanger Holder Clip Minimalistic

Introducing my easy-to-use and fast-to-print headset holder for the PS5 ! Designed with gamers in mind, this simple yet effective holder clips easily onto the top of your PS5 console, providing a convenient and secure place to store your…

Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu

Pobrania
370
Polubienia
21
Ocena
5
P

ZWO Seestar S50 Power Bank Holder

This accessory securely attaches a battery pack to your Seestar S50, which prevents cords from getting tangled as you spend a long night taking beautiful pictures of the sky. Filament - PLA or PLA +, if you're going to use in the Sun then…

Wydruk około 10,15 €–12,40 € nettoWstępna wycena jednego wariantu

Pobrania
280
Polubienia
12
Ocena
5
P

ZWO Seestar S50 Dew Shield

Just print with the flat end on the print bed. Printing Tips: Just print with the flat end on the print bed. You can add a raft if you're concerned about bed adhesion. Filament - PLA or PETG works well. Infill - 15%-100% which ever is…

Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu

Pobrania
214
Polubienia
7
Ocena
0
P
Printablesmysak85

PS5 DUALSENSE držák na stěnu

V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Držák na stěnu pro ovladač Dualsense na Playstation 5 s možností vložení nabíjecího…

Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu

Pobrania
122
Polubienia
27
Ocena
5
P
PrintablesNahoj86

Roborock S6/S5 Max Base

Base for the roborock s6/s5 max, protects the floor from the moist cloth. Use PETG or PLA STANDARD 0.2mm STRUCTURAL This base is 5.2mm high = easy docking

Wydruk około 2,63 €–3,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
75
Polubienia
11
Ocena
5

DeWalt DCW600 guide rail adapter for DWS5022 ; vedení frézky DeWALT DCW600 po liště DeWALT DWS 5022

Jednoduchý adaptér který se přišroubuje místo originálního průhledného plastu na spodku frézky. S frézkou je pak možné pojíždět po vodící liště, která je součástí příslušenství k ponorné pile DeWALT. Materiál: PETG, ASA Vrstva: 0,2mm…

Wydruk około 6,33 €–7,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
9
Ocena
0
P
PrintablesWolfiss

Feelworld S55 Sun Shade

Jednoduché skladné stínítko pro náhledové monitory Feelworld 5,5" Po vytištění opatrně odlomit bočnice od vrchní části a odřezat podpory a límce Simple foldable sun shade for video monitors Feelworld 5,5" Print it with PETG 0,2 mm , rafts…

Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesAinon3Dtisk

Stand for games Farcry playstation 2-5, ps2-ps5

Hi there, Here is a Far Cry -themed game stand for PlayStation (compatible with PS2, PS3, PS4, and PS5). It looks great and holds 10 PlayStation games (PS2 through PS5)... All the games fit perfectly. It’s ideal for a Far Cry game…

Wydruk około 6,70 €–8,19 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
4
Ocena
0
P

Dual PS5 Controller Stand No Supports

I've tested this design with PS5 controllers, but it should work with many different controllers. If your console controllers fit, please let me know what you have so that I may update the model listing. 😃 This model prints on its side…

Pobrania
11 121
Polubienia
1330
Ocena
4,98
P
PrintablesKabliga

PS5 controller scan

Simple scan of a ps5 controller I took so I could model some stuff. Thought others might find it useful.

Pobrania
10 865
Polubienia
240
Ocena
4,67
P
PrintablestheStonefox

Vertical PS5 Tentacle Holder (xbox, switch pro and 8bit do)

The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones

Pobrania
9906
Polubienia
2052
Ocena
5
P
PrintablesYellowtech

Stealth PS5 Controller Stand

PS5 Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…

Pobrania
9338
Polubienia
1365
Ocena
4,91
P
PrintablesHazzardness

PlayStation PS5 Dualsense Minimalist Controller Stand

Inspired by agepbiz's Xbox Minimalist Controller Stand(https://www.printables.com/model/449970-minimalistic-xbox-controller-stand), and not being able to find one for the PS5, I decided to learn some new skills and create my own. I have…

Pobrania
8508
Polubienia
1155
Ocena
4,83
P
PrintablesConrad Jun

PS5 Dualsense Controller Stand V2

I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…

Pobrania
7397
Polubienia
614
Ocena
4,98
P
PrintablesMatt-G

Playstation 5 slim (ps5 slim) disk edition horizontal stand

Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…

Pobrania
7290
Polubienia
302
Ocena
4,78
P
PrintablesOctaNik

PS5 Controller Stand

PS5 Dualsense Controller Stand

Pobrania
6754
Polubienia
843
Ocena
4,97
P
PrintablesHellweaver666

PS5 DualSense Controller Holder for Ikea Skadis

Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…

Pobrania
5544
Polubienia
662
Ocena
4,84
P
PrintablesHomefab3d

PS5 DUALSENSE CONTROLLER PHONE MOUNT

New version here: https://www.printables.com/model/1840378-ps5-dualsense-controller-phone-mount-bigger-strong This a remix of https://www.printables.com/model/148212-dualsense-simple-phonemount I wanted to be adjustable according to the…

Pobrania
4966
Polubienia
385
Ocena
4,7
P
Printablesneyth_makes

PS5 Controller Clip

This is a remix of DiilanDH's controller holder, but the system won't let me put it in. I improved the fit to the console and the controller so that it doesn't get knocked off so easily. I also have a version with the PS logo Check out my…

Pobrania
4796
Polubienia
619
Ocena
4,86
P
PrintablesPrint4Gods

PlayStation PS5 Dualsense Minimalist Controller Stand with PS LOGO

You inspired me to Add the Playstation brand. THX @Hazzardness https://www.printables.com/de/@Hazzardness_250785

Pobrania
4482
Polubienia
419
Ocena
5
P
PrintablesTower 3D

PS5 Dualsense Stand

For those who want to make commercial use of the printed parts, access the link below to find the 3D model licensed for commercial use and more complete editable files. PS5 Dualsense Stand for Comercial Use + Step File I made this support…

Pobrania
4449
Polubienia
1008
Ocena
4,93
P
Printablesnuurey

Playstation 5 (ps5) horizontal stand with Logo

This stand can be used to set up the Playstation (disc version) horizontally. I have remixed the original model.

Pobrania
4160
Polubienia
280
Ocena
5
P
PrintablesJeff Chen

PS5 DualSense Controller Stand

100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ). Thanks to davec54's 3D scan, I have improved upon the original version of this stand. Now the thing fits like a glove. It's quite a bit…

Pobrania
4038
Polubienia
325
Ocena
4,95
P
PrintablesBenjDavidson90

Playstation 5 controller round wheel (Mustang style) PS5

This is a remix of https://www.printables.com/fr/model/157076-playstation-5-controller-mini-wheel from @pixel2_237985. Presentation The original wheel with two circles was not confortable to me, so I designed a real round wheel to be more…

Pobrania
4006
Polubienia
565
Ocena
4,63
P
PrintablesBubbleology

PS5 Controller Stand Holder

An easy FDM printable stand to hold your PS5 controller in the look of a PS5. There are already some models out there but they don't quite hold the controller as snug as I'd like plus the printing or the assembly were often times a…

Pobrania
3761
Polubienia
361
Ocena
4,97
P
PrintablesPrint4Gods

Playstation 5 Controller Stand with LOGO PS5

Playstation 5 Controller-Ständer mit LOGO PS5 THX @holonda_3d ich hoffe er gefällt euch! Bitte liken und folgen Sie für mehr Gamingstuff ---------------------------- Playstation 5 Controller-Ständer mit LOGO PS5 THX @holonda_3d ich hoffe…

Pobrania
3714
Polubienia
339
Ocena
4,91
P
Printablesnoetico

PS5 Game Holder

Made a remix of the original Mark579 PS4/3 full back game case holder with the same dimensions. Please contact for commercial use approval. Print Settings Supports: No Resolution: .2 Infill: 15 Category: Video Games

Pobrania
3525
Polubienia
261
Ocena
4,88
P
PrintablesDEADBEATDOOM

PS5 SLIM REPLACEMENT FEET

PS5 SLIM REPLACEMENT MOUNT FEET PRINTED AT .4 10% INFILL ON ENTINA 2 PRINTER

Pobrania
3254
Polubienia
118
Ocena
5
P
PrintablesChad_Taylor

PS5 Controller Racing Wheel 100% 3D printed - TEST FIT

TEST FIT TEST FIT TEST FIT Head here for the full PS5 design PS4 Version Available Here Xbox Version Available Here Print and test controller clips to make sure they fit. Two files provided here: 1: STEP file for those who'd like to…

Pobrania
3179
Polubienia
739
Ocena
0
P
PrintablesEthan Johnson

PS5 Controller Stand

This is a minimalistic display stand for your ps5 controller stand. Print with 20% infill and 2 perimeter walls. Should take about 1 hour to print

Pobrania
3116
Polubienia
209
Ocena
5
P
PrintablestheStonefox

Skull & Tentacle Floating PS5 Controller Holder

A haunting skull emerges from melting tentacles to create a dramatic floating display for your PS5 controller. Other controllers fit, but not as snugly as the PS5. This dark, sculptural stand blends gothic horror with modern gaming…

Pobrania
3020
Polubienia
556
Ocena
4,8
P
PrintablesJeff Chen

PS5 USB Cable Housing In Various PlayStation Controller Connector Styles

Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…

Pobrania
2767
Polubienia
834
Ocena
4,71
P
Printablesjdlg2065

PS5 Controller Holder

PS5 Controller Holder. Use double sided tape to secure holder onto a desk.

Pobrania
2744
Polubienia
202
Ocena
5
P
PrintablesRhys34512

PS5 (Original - not slim) Side Panels

These are side panel files for the original (not slim) DISK PS5 - Digital hopefully on their way soon, they require a large format printer to be printable, printers such as a CR-10 or likewise build volume (around 390mm high). This step…

Pobrania
2744
Polubienia
187
Ocena
0
P
PrintablesTwoPuncakes

PS5 DualSense Controller Wall Mount

A remix of kiwithreed's design from Thingiverse . Modified the following: Removed headphone holder. Simplified the design so it prints with drastically less filament. 3M Command Strip (Medium) compatible. Recommended print settings (.3mf…

Pobrania
2712
Polubienia
225
Ocena
4,71
P
Printables3DCatt

ps5 controller dual stand

This is a remix of two stands fused in one

Pobrania
2676
Polubienia
160
Ocena
5
P
PrintablesHedd

Dual ps5 controller stand

found a single design then doubled it to fit 2 PS5 controllers back to back.

Pobrania
2533
Polubienia
164
Ocena
4,7
P
PrintablesPhunXter

PS5 Games holder

2 sizes of PS5 Games stand/holders - One that holds 10 games and one that holds 6 games Includes letters file so you can print in black or other contrasting colour Also fits Bluray's or DVD's Resolution:- 0.2 - 0.3 Filament:- PLA+ or PETG

Pobrania
2506
Polubienia
241
Ocena
5
P
PrintablesSebomasteR

PS5 Under Desk Mount (Disc Version).

There are few ways to mount the PS5 under the desk but since I have a 3D printer I decided to make my own version. Two brackets with slots for self adhesive tape for easier assembly. Printing Print the parts in the suggested orientation.…

Pobrania
2495
Polubienia
263
Ocena
4,89
P
PrintablesBiro 3D

PS5 Controller Stand Holder

Un remix donde añadí el logo de PlayStation

Pobrania
2454
Polubienia
205
Ocena
5

Playstation 5 Joystick/Thumbstick Extender (No Supports!) (PS5)

This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…

Pobrania
2386
Polubienia
136
Ocena
4,7
P
PrintablesPrime Project

Support manette PS5

DESCRIPTION DU MODÈLE 3D Stand PS5 DualSense: Grace à se superbe support de manette PS5, conçu et designer pour votre manette DualSense, vous allez pouvoir l'exposer avec élégance. comporte 3 partie ( gauche , centre , droite ) s'imprime…

Pobrania
2330
Polubienia
210
Ocena
5
P
PrintablesMike

Deadpool ps5 controller case

if you are searching for the ps4 version it's finally out!! 3D TEXTURES ARE HERE!! To ensure a secure and seamless closure for your Deadpool-themed PS5 case, we recommend using a high-strength adhesive glue or premium double-sided tape .…

Pobrania
2313
Polubienia
329
Ocena
2,75
P
PrintablesReferentiel

DualSense PS5 Controller

I have a project: make a perfect PS5 controller holder. For that I need one thing: the 3D of the controller! It is complex and requires only one technique to obtain it accurately: the scanner. So I bought a scanner and reworked the…

Pobrania
2203
Polubienia
88
Ocena
4,8
P
PrintablesOndrashek

Playstation 5 (ps5) horizontal stand small print bed remix

Print it and snap it together Original size for MK3 https://www.printables.com/cs/model/229447-playstation-5-ps5-horizontal-stand 28.12.22 Added No Logo version 27.12.22 Added better joint for snap (preview image is with old joint)

Pobrania
2177
Polubienia
142
Ocena
4,91
P
PrintablesKimboo

PS5 Dual controller and headset stand

Stand for two Dualsense 5 controllers and a headset. Features a passthorugh for a charging cable that will connect to either controller or the headset. Designed for Dualsense 5 and the Pulse 3D headset, but should work with most headsets.…

Pobrania
2136
Polubienia
223
Ocena
5
P
PrintablesWesYarber

PS5 Wall Mount (Disk Version)

Remix of Charly88 on Thingiverse's original design. This works to mount the disk version of the PS5 and secures it with the screw included in the mounting plate that originally came in your PS5 box.

Pobrania
2132
Polubienia
136
Ocena
4,86
P
PrintablesCrazy3D

Crystal Cluster Dual sense controller stand Playstation 5 PS5

Created this stunning PS5 controller stand with realistic quarz crystals. Looks best with two materials. Update 2025-06-07: Increased the clearance to the controller. Would be happy to see your makes!

Pobrania
1984
Polubienia
278
Ocena
2,5
P
PrintablesReferentiel

DualSense PS5 Stand

I'm glad to introduce the PS5's controller stand that I created. Nice design and perfect fit, this is what I wanted for this stand. To achieve this, I scanned the actual playstation 5 controller very accurately : DualSense PS5 Controller…

Pobrania
1924
Polubienia
319
Ocena
5
P
PrintablesVlastimil

PS5 controller and headphones holder

This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…

Pobrania
1903
Polubienia
212
Ocena
4,91
P
PrintablesKnurbine

Competizione PS5 Driving Wheel

PS5 snap-on driving wheel with high tolerances. This is a PS5 controller snap-on driving wheel meant for ultimate performance. Tolerances are very tight to eliminate play and sloppiness. All parts are 3D printable, but supports are…

Pobrania
1871
Polubienia
154
Ocena
4,56
P
PrintablesForker45

PS4/PS5 Simple Case Holders 10x | 12x | 14x

I needed a game case holder for 14 PS4 cases but only found designs to hold 10/12 cases on here & Thingiverse. I didn't want to print multiples or consume the time/material required for existing case designs, so I made my own. This holder…

Pobrania
1859
Polubienia
295
Ocena
4,81
P
PrintablesWojciech Kawa

PS5 Headset Hanger

Hi, here is my design of a playstation 5 headset hanger. I tried to make the hanger as best suited to the headset as possible and well presented, I moved it away enough so that the headphones did not lean against the console. It is best…

Pobrania
1842
Polubienia
161
Ocena
5
P
PrintablesKabliga

PS5 Controller Stand with PS logo

Very simple yet good looking PS5 controller stand. This stand is a perfect fit due to using a 3d scan of the controller. Minimal size with no supports or brims needed for easy print.

Pobrania
1810
Polubienia
175
Ocena
5
P
PrintablesSerVito3D

PS5 Controller and Headphones Wall Mount (2 Versions)

PS5 Controller and Headset Wall Mount (or Single Controller) This wall mount provides a versatile solution for organizing your gaming space, allowing you to conveniently store one PS5 controller and a pair of headphones (or a single…

Pobrania
1766
Polubienia
122
Ocena
4,7
P
PrintablesDogInABox

PS5 Controller and Charging Cable Holder

This is a remix of neyth_makes PS5 Controller Clip. I trimmed it down and made a few modifications to hold the controller more securely. I also added a little cut out at the top to hold the USB charging cable. This is my first time…

Pobrania
1764
Polubienia
229
Ocena
4,85
P
PrintablesJmaxime89

PS5 skates disk edition

I have designed these PS5 skates for a buddy of mine. He was super happy about them so I am assuming they fit well enough

Pobrania
1759
Polubienia
181
Ocena
4
P
PrintablesPrintuin

PS5 Digital Edition Wallmount

I created the Playstation symbol by using the "Negative Volume" function in PrusaSlicer 2.4. Scaled to 50% (orientation: X=-40; Y=0; Z=1.05; and rotated in the appropriate direction). The wall brackets need to be mounted at a distance of…

Pobrania
1758
Polubienia
283
Ocena
4,25
P
PrintablesMart80

Simson S51

My “Simson” S51 for printing. I worked on the 3D data set for a long time, now it is finished and printable. You need some patience and sensitivity when breaking out the support geometry... Have fun printing.

Pobrania
1704
Polubienia
104
Ocena
4,8

PS5 Games Holder 10 and 12

The holder holds up to 12 games at once The logo is printed flat and separately to achieved a high quality look that then slots into the front of the holder itself witch you can then glued in place The dimensions if you wish to print a…

Pobrania
1677
Polubienia
210
Ocena
4,86
P
PrintablesTheFlocke

Simson S51 - Werkzeugkasten (mit Schloss)

Simson S51 Werkzeugkasten Der Werkzeugkasten setzt sich aus folgenden Bauteilen zusammen: der Kiste selbst dem Deckel einem Briefkastenschloss 4 kleinen Kabelbindern Das Schloss sollte einen Durchmesser von 16 mm haben und einer Länge von…

Pobrania
1675
Polubienia
91
Ocena
5
P
Printableschris

PS5 DualSense Controller Stand

PS5 DualSense Controller Stand

Pobrania
1594
Polubienia
158
Ocena
4,75
P
PrintablesKnurbine

PS5 Mini Wheel Modification/Remix

This is a modification of the ubiquitous PS5 controller mini wheel add-on by pixel2: https://www.thingiverse.com/thing:4693372 Here is a video of it being printed and operated: https://youtube.com/shorts/xQ8_doe1zzo My modification…

Pobrania
1574
Polubienia
142
Ocena
3,75
P
PrintablesCraig Wagner

PS5 Slim (Disk) Vertical Stand w/Storage

I've been looking for a vertical stand that would hold the (larger) horizontal feet and the hole plug. All the ones I found with recesses were for the (smaller) horizontal feet of the digital edition. I imported the STEP file into Fusion…

Pobrania
1561
Polubienia
117
Ocena
5
P
Printablesrvij

PS5 Slim Wall Mount

It's a simple but super sturdy Playstation 5 (new slim model) wall mount. It utilizes the M3 screw at the bottom of PS5 to secure it on the mount. No need for any additional top part. Out of the two screws, I screwed one into the stud and…

Pobrania
1552
Polubienia
90
Ocena
4

HeadPhone Holder PS5

Headphone holder on PS5 whit logo and name: Pro Player

Pobrania
1549
Polubienia
179
Ocena
5
P
PrintablesLordTalon34

Video Game Stands (PS2,PS3,PS4,PS5,XBOX,XBOX ONE,PSVITA,GAMECUBE)

Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse

Pobrania
1529
Polubienia
182
Ocena
4,6
P
Printablesdrhollen

ZWO Seestar S50 light/dew shield - baffled

ZWO Seestar S50 light/dew shield - baffled. This light/dew shield is an interference fit and slides into place. Remember to remove it before shutting down the Seestar. This design has many baffles inside to help reduce light reflections.…

Pobrania
1493
Polubienia
65
Ocena
5
P
Printablesadhicurry

ps5 controller wall mount

got rid of the headphone holder from the original model

Pobrania
1479
Polubienia
99
Ocena
4,83
P
PrintablesTower 3D

Keychain PS5

Keychain PS5

Pobrania
1475
Polubienia
278
Ocena
4,71
P
PrintablesTim

Roborock S5 Vacuum Eyes

<<UPDATE>> Model updated following some feedback. The top surfaces for the main eye and eyeballs have been flattened, so that it is easier to print with minimal supports and post processing. Download the files labeled “xxx - Flattened”…

Pobrania
1471
Polubienia
1058
Ocena
4,97

PS5 Pro stand - optimized airflow and foot compartment

Je remercie le créateur pour son modèle original et je l'ai amélioré pour qu'il corresponde parfaitement à ma PS5 pro. J'ai optimisé l'évacuation des aérations de la console pour évité toute surchauffe et créer un compartiment pour mettre…

Pobrania
1461
Polubienia
139
Ocena
5
P
PrintablesTJDesign

Guide rail adapter for Makita DSS501

Guide rail adapter for the Makita DSS501 (18V compact circular saw) Turn Makita's smallest 18V circular saw into a track saw. This adapter lets the DSS501 run on Makita guide rails, and on similar rails from Festool and other brands, for…

Pobrania
1418
Polubienia
188
Ocena
4,88
P
Printablesaviv r

mini ps5

a miniature of the ps5 for gaming area or just for fun

Pobrania
1412
Polubienia
169
Ocena
3,4
P
PrintablesMuloo

PS5 Wall mount Disk version model CFI-1216A

Summary I made this remix for the disc version that fits ;) Corrected the anchor hole placement and depth. Replaced the text "Teo's PS5" by PS5 in the correct font. This is for normal orientation (PS logo facing towards you) of the PS5…

Pobrania
1397
Polubienia
129
Ocena
3,88
P
Printablesern

PS5 Controller stand

Modeled to fit any controller with the same dimensions as the base PS5 controller. The Playstation 5 DualSense Controller has a height of 4.2” (106 mm), width of 6.3" (160 mm), depth of 2.6” (66 mm). If your controller does not fit those…

Pobrania
1369
Polubienia
134
Ocena
5
P
PrintablesTerso

PS5 Dualsense charging station with logo

Remixed. I simply added the PS5 Logo via Tinkercad. Printed with my now retired Anycubic in white PLA, brother in law loved it. Full credit goes to odbo on thingiverse, it's a remix of his plain charging station !

Pobrania
1317
Polubienia
155
Ocena
4,94
P
Printablesobscuresausage

PS5 Game Stand

This game stand is simple, easy to print and is robust in its usage. You can print out some thin letters to glue into the front to achieve the the nice two colour effect! The stand fits five games and has a flat back and flat sides so it…

Pobrania
1302
Polubienia
195
Ocena
5
P
PrintablesOwl

Double Controller Holder for Xbox | PS5 Vertical Wall Mount

Screw mounted holder for 2x Video game controllers. Works with Xbox 360, Xbox One, Xbox Series X/S, PS3, PS4, PS5. Purchase it here :) https://www.etsy.com/listing/1768995799/double-controller-holder-for-xbox-ps5

Pobrania
1282
Polubienia
130
Ocena
4,89
P
PrintablesEMA Labs

PS5 controller Holder COD

v1.1 - softened more angles on letter Z and E easy printable ps5 controller stand , angles softened so no need for supports 0.4 nozzle, 0.4 line width, 0.2 layer height , 20 infill , standard stuff happy printing !!…

Pobrania
1280
Polubienia
116
Ocena
5
P
Printables3D_Design

PlaySation PS5 Logo

PlaySation PS5 Logo

Pobrania
1261
Polubienia
338
Ocena
5
P
PrintablesSpank

Playstation PS5 wall mount (left/right sided)

Printed on PLA infill 50 % to be very solid and strong , i think its better if you can print it on PETG How about buy me a coffee buymeacoffee.com/spank7

Pobrania
1257
Polubienia
164
Ocena
3,67
P
PrintablesMAKE IT TV

Playstation 5 Console Side Contoller Holder/ PS5 Controller Hangs / Stand / Clip

Thx @ @neyth_makes_106416 Du hast mich inspiriert diesen Playstation 5 Konsole seitlicher Controller Halter etwas umzugestalten You inspired me to redesign this Playstation 5 console side controller holder a bit

Pobrania
1217
Polubienia
105
Ocena
5
P
PrintablesGetBent57

PS5 Controller Stand With Logo Remix

Added the PlayStation logo to this controller stand.

Pobrania
1213
Polubienia
156
Ocena
5
P
PrintablesShaunmull

PS5 Game Disc Holder

Remix of the game holder, I needed a vertical face that would allow the stand to be hard up or back to back with more stands within a drawer. PS logo has been recessed so you can either leave open or print the logo separately and add in.…

Pobrania
1213
Polubienia
86
Ocena
5
P
PrintablesRendered.

Ps5 Symbol Controller Stand

I loved the idea of utilising the flat spot on the PS5 controller. Print as orientated, use supports. Incorporated the playstation symbols for this stand.

Pobrania
1211
Polubienia
174
Ocena
4,8
P
Printables3DBen

PS5 Controller Holder

Update 19.02.2023 Reinforced weak spots; optimized for less supports There is some Space between my TV and the Shelf above. So i decided to design the holder to use this Space for my PS5 Controllers, which usually lay around everywhere.…

Pobrania
1199
Polubienia
169
Ocena
4,67
P
PrintablesLatesuperd50

PS5 Spiderman Controller Stand

The stand will have an imprint of the Spiderman logo, you will need to use tree supports for the logos imprint to come off nicely. Then as simple as it can possibly get just print and plop on the spider logo onto the stand!

Pobrania
1191
Polubienia
167
Ocena
5