2963 modeli
A simple yet beautiful science design inspired by the looks and vibes from the atomic-punk game - Atomic Heart Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some…
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
Inspiration This design was inspired by a toy that my son had which was made very cheaply and broke much too quickly. Years later I now have a 3D printer and some CAD knowledge with which I was able to create a much more robust version…
This is the “Freight Ten” as inspired by my four “Mongruxx” Novels. It includes the articulated version. It can be printed as a stand-alone Freight Ten, or with the powered tailor. For all of you Sci Fy tread heads out there. Transport…
Bookmark for students or really anyone, who likes science. You can print it with PLA or anything else. I made it with 0,4 mm nozzle, however it would probably be better with 0,25 mm. But it works and looks nice anyway. For the different…
This is the Tank Demolior Class Heavy, “Deathhead II ” as inspired in book four of the “Mongruxx” Novels (Mongruxx Until We Cross This Bridge Again). For all of you SCI FY tread heads out there. Designed on Tinkercad, the chassis/Treads…
100x160mm sign, reading “Science” with art of an atom, beaker, and a frog in a jar. 2024-07-10: added a version with just the “frog in jar” art Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with…
This is the “Super Freight Ten” as inspired by my four “Mongruxx” Novels. It is specifically in Mongruxx: Until We Cross This Bridge Again. For all of you Sci Fy tread heads out there. Transport your Armoured Shelter…
Windows at my place do not have this nice feature of remaining locked half open. I have therefore designed this particular item which does the trick. Printing a bunch of these was way cheaper than having all the windows replaced (and…
This is the “Freight Ten” Command version as inspired by my four “Mongruxx” Novels. For all of you Sci Fy tread heads out there. Transport your Armoured Shelter…
This is a “Fuel Tank.” Designed to be carried on a Freight Ten, the articulated Freight Ten Trailer version, or the Super Freight Ten. More cargo for all of you Sci Fy tread heads out there. Freight Ten…
This adapts the eyelet drive on my scissor jack (meant to be used with a hooked shaft by hand) over to a ¾" or 19mm socket. My 1.5 ton scissor jack didn't have any method of driving with a drill. I had seen this on other jacks online, so…
SCI FY Cargo containers. Armoured, with bolts on the sides. Prepared for anything! Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff:…
Scissor holder for IKEA Skadis board, with t-clips. Two sizes - for medium and large scissors. See pictures for reference. Should print fine without support, both flat on the print bed or standing. 20% infill.
This is part two of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
A simple box that looks like a storage crate from a science fiction movie. Pre-scaled to three sizes: 60mm, 90mm, and 130mm. Can be printed in separate pieces to accommodate multi-colored prints. No supports needed! Multi-color lids have…
Jet a 45° pour piscine Intex qui permet de crée un courant circulaire et donc un meilleur brassage de l'eau et cela concentrera donc les différents débris au centre de la piscine.
This is the “Freight Ten” Single Cab as inspired by my four “Mongruxx” Novels. Transport your Armoured Shelter https://www.prusaprinters.org/prints/121033-armoured-shelter-terrain-two-models or carry the Machina to their next destination…
Not all interstellar or in-system cargo gets transported in military dropships, so I re-modeled this source design into a civilian drop shuttle for your all-purpose basic inter-orbital transportation needs, at 6mm scale (it could also…
Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…
Freight Ten Sides "Accessories." This set of sides for all the Freight Ten models. Keep your stuff from falling out. BullNose Freight Ten: https://www.prusaprinters.org/prints/143750-freight-ten-bullnose-model-science-fiction Single Cab…
Generic Sci-fi Greeble #2 Wall Plate Like. Switch Cover?
This is the Freight Ten “BullNose” as inspired by my four “Mongruxx” Novels. The Freight Ten “BullNose” Recovery Vehicle: https://www.printables.com/model/175215-freight-ten-bullnose-recovery-vehicle Transport your Armoured Shelter…
Generic Sci Fi Greeble #1 Radial Symmetry Stuff.
StarWars - Scifi - Hercules DJ Knob Set
Comboulator Sincropazinator Magilicuddy Tinestick Die. The distracting dice Zaphod Beeblebrox used to help steal the Vogon Ship “Heart of Gold” There are two versions. Regular and Thick.
Tomb Raider Atlantean Scion The Atlantean Scion is the central artifact and main plot device in the original 1996 Tomb Raider and its 2007 remake, Tomb Raider: Anniversary . Key Details What it is: The Scion is a powerful ancient artifact…
Soporte para colgar la pértiga tanto del barre fondo como de la red de la piscina.
Some cool Aperture Science Wheel Center caps. I would advise to print in PETG and maybe Anneal it afterwards. Worked well with my MMU2s. I also printed really hot so that the layer Adhesion is good. The Stringing doesn't matter since it…
This model will be a great addition to your D&D tabletop adventures. Just unscrew the nose-cone and put down on the table a toss your dice in. I have two different models the “Screw Top and Porthole” and a launch pad (Pad # N20 ) to…
Durable, kid-friendly, and perfect for any desktop or nightstand, this 3D printed piggy bank is a unique gift that will provide enjoyment while helping develop good financial habits. Its cute prints will look great displayed together in a…
This tool holder is suitable for REGAL VISE (shaft diameter is 9.5mm) You adjust holder height by using spacer tube(20mm) ・2 square holes for scissors ・2 square holes for tweezers ・1 hole for vise shaft(dia.10mm) You can choose hole…
This is just a small modification of the tool hanger made by @Eightbit. All I did was expand it to about 70mm in width. It fits the oscillating tool made by Bauer but likely fits other tools that have a wider handle. No supports required.…
A catch-all box tray for holding common tools for use with ThermoFisher LC and MS intruments.
Cello RockStop Kit : Sci Fi Themed
Keep your mini scissors secure and within reach with this 3D-printed Mini Scissor Holder! Designed for convenience, it’s perfect for craft tables, toilets, sewing kits, or desks. I printed using a 0.4mm nozzle, 0.2mm layer height, 5…
The Aperture Science Shopping Cart Key is special designed to unlock Shopping Carts in europe. European Testsubjects should always have one on hand, when shopping some food or other stuff, that humans need, to stay alive.
A gridfinity bin for a Fiscars Pro. It is a low as it can get. It fits in my drawer with 1mm left :-)
I liked the original model, but I wanted permanent Skadis pegs instead of the original design. As it is now, this model needs supports, but should work fine with some organics. Personally I use 3 perimeters and 15% Support Cubic infill. I…
Lost one of the Small Bushings, so made a replacement. Printed with ColorFabb HT, Auto Organic Supports.
Supporti con cuscinetto per asse z. Questi non danno problemi con la calibrazione. I cuscinetti sono i soliti 8x7x22. Vanno accoppiati con i nuovi supporti dei motori i quali innalzano la vite e la barra di scorrimento, di 3 mm. per…
“Remember kids, the only difference between screwing around and science is writing it down.” –Adam Savage, Mythbuster, Season 10, Episode 8 Features M600 color change at layer 5 “draft” by Chaiwat Kinkaewfrom Noun Project (CC BY 3.0)…
Imprimer sans support, le PLA ne pose pas de problème avec l'eau mais il peut y avoir des infiltration d'eau prévoyez donc d'épaissir les bords et de l'imprimer avec des couche fine.
This model will need supports. It's oriented for printing, just select “support for build plate only” Colored and sliced file included for a 5-toolhead Prusa XL. Use glue or an m3x20mm countersunk screw to attach the head to the neck…
I had the luck to visit Portland recently, and to my great joy (and even greater misfortune for my bank account), I happened to find the Saber Forge showroom, while looking for an Airsoft store. I ended up buying a premade Acolyte saber,…
Fix for Westcost titanium scissors (central pin where scissors pivot). Print with material that is good in layed adhesion. PLA works for me. Join again with original screw. No support, no brim. Useful links: If you broke handle for this…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
intercalaire lame scie circulaire. printed in PETG but should be print in PLA
The stock tube trays from Thermo only hold Thermo MS vials which are far too small for sample fractionation. Hence we designed a tray holding 2 mL tubes and printed it. Note that you need to mount the appropriate data matrix codes (these…
Print the character sequence and stick it on a skewer.
A simple stand for my Canberra / Bicron 5H5. Designed with a 5 cm high sample chamber
I created this lid for the center where I work. It had deteriorated by the pressure working. I took as a reference one in good condition. I recommend printing at layer height 0.15 or lower, since the thread pitch must be very sharp even…
Il s'agit d'une scie à onglet Metabo KGS 216 M. Le cache qui se trouve sous la lame et qui protège le laser et la lampe LED était cassée. J'en ai profité pour remplacer la LED OEM par un modèle plus puissant:…
Remplacement des deux “poignées” permettant de déverrouiller le mécanisme d'ouverture du plan de coupe. La fichier stl est pour la poignée gauche, mais dans PrusaSlicer, il suffit d'appliquer une symétrie pour la poignée de droite. Vis M4…
Un panneau avec lettrage en relief, à mettre au pied d'un plant de cive/ciboule, avec le nom scientifique en dessous. Print instructions Print the layers from 0 to 1.5mm in one color, and the layers after that in another color to have the…
In this model I remixed the keychain for shopping carts and put Science Salon PRG on it. Support: NO Brim: YES Filament: PLA Time: 30min
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
Présentation du modèle : Cette valve anti-retour est conçue pour faciliter la vidange d’une piscine tout en empêchant le reflux d’eau dans le circuit. Vidange piscine, système de filtration et pompe à chaleur. Le système comprend trois…
Our base unit thermometer that we have had for years broke the stand that keeps it upright. I designed a simple model with PLA I had around.
Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…
Robot Select de maytronic
Space-saving holder for the trigger point presses from Liebscher & Bracht. The presses are made for acupressure and pain therapy. My wife doesn't have a proper place to store them. That's why I designed this holder for wall mounting.…
Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.
Garden grass bush scizzors replacement part
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 97.97x174mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Voici une aide pour le remplissage de la piscine "INTEX" imprimé en PETG, accroché sur la margelle de la piscine, sans outil juste un effet d'appui contre appui, un filetage est prévu pour visser un raccords type Gardena.
salut a tout le monde c'est ma première foi que je poste sur printables et le model que vous voyez est un support pour maintenir le tube de remplissage de piscine il y a aussi 4 trous pour visser le support merci
Voici une boîte que j'ai créée pour fixer au bord de ma piscine "INTEX" ce qui permet d'avoir le téléphone à l'abri de l'eau mais près de soi, ainsi qu’une poubelle pouvant accueillir différentes choses comme des mouchoirs après…
Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing. Features: Threaded Screw Mechanism:…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 6 M3x25mm socket head fasteners, 2 Stainless…
Rolling Foot Massagers for Plantar Fasciitis – 3 Styles Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, available in three unique styles. Each design offers a slightly different feel to…
Simple solution for large scissors storage on a Ikea Skadis pegboard Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
This is a wider version of a scissoring mechanism designed by Richard Swika on thingiverse Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 30% pick material wisely, Pla may break at handle
*UPDATED 12/27/2024: The “Fix Model” warning has been resolved. Safety first! Rule #3: Keep your finger straight and off the trigger until you are ready to fire. I scaled mine to 122% to fit my G.I. Joe Classified and Action Force gear.…
Functional 3d printable airsoft ak body kit with folding stock. Uses standard airsoft ak internals. Includes stl and step files. Takes about 1kg of material to print. I desingned the model with 0.25 mm tolerances between each part.…
Print your own gothic sci-fi ruin city. Everything prints without support. Every level with a floor is separate with big pegs and holes to keep them aligned without glue. A quick and easy method for painting them:…
A remix of a scissor holder Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
Today, I want to share a design of one of my patrons with you - this awesome dice tower was created using the terrain lib, so now you have a dice tower that fits perfectly to your tabletop terrain. A big thank you to the original creator…
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
One week after the initial release of the terrain generator, I published a big update. Many more options came in, like full buildings with all 4 sides (previously, only a corner ruin was possible). To give you some more buildings, I…
A remix of the Large Scissor Holder for Skadis by MattBurt that fits the honeycomb storage wall by RostaP
This is a model of the right gauntlet of the Predator gear. The gauntlet contains a retractable Wrist Blades and Scimitar Blade. I skipped any instruction video as this is rather simple assembly. Note: during the assembly insert the…
Your scissors always in the same spot: grab them and put them back with one hand. A scissor holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
The Gömböc is a fascinating mathematical object with a unique geometric property: it has only one stable equilibrium point and one unstable equilibrium point. This means that when placed on a flat surface, it will always return to its…
This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…
Uploaded authorized by the original modeler Indigenous Effects . Check him out. There are two options of covers: 1: Option cover etc… It is compatible with the swing set but are “plain”. (Yes the parts list photo is a little it chopped…
This is my model of the Scirocco Class Heavy Cruiser from the Show the Expanse. The model is a kit and does not require any glue. Unfortunately it is not done in scale with my previous MCRN ships as that would mean the ship would reach…
Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.
Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…
This is an OpenSCAD library to generate an ergonomic handle that distributes hand contact pressure as evenly as possible, for any size of hand. The dimensions in this model are based on several research papers using anthropometric data…
