The Litterator - Cat litter scoop
An original design cat litter scoop created and tested by Christopher Schiller.
- Pobrania
- 3700
- Polubienia
- 495
- Ocena
- 4,98
1464 modeli
An original design cat litter scoop created and tested by Christopher Schiller.
Update Aug 23, 2026: I've created a new storage caddy for the Pooper Scooper available here... https://www.printables.com/model/1821217-pooper-scooper-caddy The influence for this litter scoop came from a Gopro handle by Nazzaf and the…
Two sided measuring scoop This model is a two sided measuring scoop with a volume of 60ml and 20ml for example washing powder. Most washing powders require a dosage of 60ml or 80ml. With this scoop it very easy to get the perfect amout.…
A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…
A 3D printable modern take on the Garden Scoop designed to scoop soil, sand, fertilizer and other items around your garden, yard or at the beach. The design consist of 3 parts that can be easily 3D printed, without any support, on a…
This is a variation of my previous two piece ice scoop with traditional handle. I found that the traditional handle that sticks out the back is a problem in the deep ice compartments of countertop ice makers. This design completely solves…
12x6mm wider slot holes. Base and handle are printed separately, then glued together. I've printed it in PLA. Just make sure you add supports.
WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…
Print directions | PETG material recommended but any material works fine, recommend 0.2 mm layer height or less for smoothest results on the angled edge. Easy print, no supports required.
Fresh air scoop for piper aircraft like Cherokee or similar. borrowed from thing verse.
GizmoGorilla's design was great, I just needed something a little narrower. Also refined the lead edge to get in the corners better. Printing notes: PETG (black, or anything very dark). .30 mm draft layer (this was only to cut down the…
Simple parametric scoop which you can adjust for you own needs. Files You can find the .f3d file for parametric adjustments in the Fusion360 directory. The STL directory contains multiple version of the scoop with different sizes. For the…
print with PETG Printtime: 1h 15 min
Here's the holder for this version https://www.printables.com/model/631014-cat-litter-box-holder *Edited the handle to be smoother and without the sharpcut * Printed in PLA 70%infill should do the work no supports needed. Works with PETG…
Ideální lopatka na každodenní úklid klece. The ideal scoop for daily cleaning of the cage.
CZ Jedná se o zakrmovací lopatku vhodnou pro všechny rybáře. Ke složení potřeba pouze jeden šroub a matka. (po otestování udám přesné rozměry a případně upravím model) Budu rád za zpětnou vazbu, jestli by byl zájem i o násadu. Díky EN…
Coffee scoop for one coffee 7 - 10g, Use lower layers for smooth surface.
This is the hood with a scoop, allowing extra clearance for additional motor cooling of your winch truck from 3DSets. You should print the hood with extra supports. You can also change the density of a mesh in prusaslicer. Honestly, I am…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to ANY SIZE - it prints without supports! Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers. The Super Scooper Squared has an…
No supports needed. Scoop with curve to ensure material does not fall back out when pulling the scoop out. Can be scaled to your liking, standard inner size is 74 x 74 mm. Angled opening part of the scoop should be placed on the printbed…
****NEW IMPROVED VERSION 2**** The model V2 no longer needs an elastic band to hold the bag in place over the open end of the scoop, the clips now do this job. As a bonus, supports are not needed when printing this version. Cat litter…
A solution I came up with for opening up the heat sink fins on the BC-250. This idea was inspired by the tools that are used for straightening AC radiator fins. Recommended Usage Instructions: Please be careful . The fins on the heat sink…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to the size you need, no Supports! Another version: https://www.printables.com/model/443953-ergonomic-pet-litter-scoop-no-supports New! Super Scooper Squared!…
I needed a scoop for granular material like chicken feed. Models There are 2 sizes, each with hole and without hole. Form of both models are equal, I adjusted the wall thickness as I scaled them. (small => 2.0mm, large => 1.8mm) For…
Cat litter scoop. 5mm wide holes. If you print as per picture you should need no supports. Handle and scoop prints separately, then clicks together. Added scoop and handle combined file. I've printed it in pla, but for longevity and…
Perfect size for scooping ice into glasses or cocktail shakers. Scoop dimensions (LxWxH): 120x50x40mm (~4.7x2.4x1.5") Total length including handle: 190mm (~7.5")
Cat litter scoop and bagging in one! Put the bag over the open end of the scoop, sift out the good litter, tip the scoop up and the bad stuff goes straight in the bag, continue scooping until you’re done. This scoop has an ergonomic…
Updates 2023/08: Updated the handles and the base on the 25 and 50 ml variant (v1.4). The new handles are scaled according to the cup size, are sturdier and look more appropriate. The base has been widened slightly, making them stand more…
It holds around 200 g of dog food, atleast with the kind my dog is eating. Updated the design so that the handle needs less support. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.35 Infill:…
I used the original for a while but it was always a bit hard to maneuver for me, especially if I'm trying to be careful or scraping the bottom of a jar. I hardly ever used the pick side so I just turned it into a T-handle for better…
A basic coffee scoop I whipped up.
Air Scoop – Fresh Air for Cars Without A/C Stay cool on warm drives without air conditioning. This Air Scoop mounts securely to your partially open window and channels fresh outside air directly towards the driver. It uses a cap that…
I needed a scoop with these characteristics: long handle to reach the bottom of the 500g container. pick up 5g of creatine (optimal amount for muscle growth). a hole to hang it. I designed this scoop for a 500g yamamoto creatine…
This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form. There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly…
Description: Cup to dispense washing powder / detergent. Has a ml scale on the inside. I hope you like the model! → Makes and Comments are very much appreciated :) Two V ersions Available: → New version (v6): Fully support-free design –…
Model created in the process of learning to work with Fusion 360 I've attached F3D file in case if somebody will want to customise it --- Do you like my model? Buy me a coffee! 50% of all earnings will be donated to charity…
While the lockdown gardening shops were closed, but spring was already in! So had to quickly model and print a pocket shovel so solve some gardening time! Print without support and so far very solid! Print instructions PLA 0.2mm height, 3…
I was looking for a new scoop for my hot chocolate mix (since it didn't come with one) that was both good looking and easy to print ( 45deg angles or better! ). I was going to make just one, but then got carried away and figured they'd…
My mother has always used them in the kitchen since I was a child, but they were made of wood. I wanted to recreate them to be 3D printed. They are very comfortable, especially for sugar and salt. I use the LARGE model to salt the pasta…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 7.5 unit_volume_1…
Prints just fine with only 2 perimeters (0.4mm nozzle) and no infill. Also no support needed For reference: 1ml suitable for measuring spices 2.5ml equals the volumen of one average sugar cube 5ml-15ml Usefull around the kitchen 20ml-25ml…
My mother had a wooden sugar shovel and my sister also wanted one of that size. My father then said he would like to have "one number" smaller. So I took my calipers, took some measurements and created a quick model in Fusion 360. Nothing…
The original coffee scoop that I used for some two years broke at the connection between the handle and the measure cup, so I did a redesign using Fusion 360, preserving the original dimensions.
Description Cute but practical dog food scoops to measure out an expected amount of food/kibble. Available in 3 sizes. Although visually similar to the earlier version (minus the handle changes), this version is completely redesigned from…
who doesn't know it? you always have to dig around in the Chunky Flavour to find the spoon and end up with sticky fingers. That always bothered me. That's why I created this spoon holder so that the spoon is always within easy reach. The…
Simple Cat Litter Scoop. Fast and Easy to print
Here is a perfect scoop for ground herbs and spices! Create your own blend of tea! Print 100% infill. I used PLA
I use a scoop for scooping up wood pellets while cleaning a parrot cage :) Print instructions In the .3mf file, the scoop is separated into tho pieces (base and handle). STL file can be also separated by PrusaSlicer function Separate to…
Introducing the PoopScoop , a scoop specifically designed to pick up your pet's waste quickly and hygienically. If you are tired of struggling to clean the yard, especially on grassy areas, this 3D model is the perfect solution. ✨ Key…
I needed a scoop for some powder detergent, couldn't find one I liked so designed my own. Prints without support in the orientation shown on the print bed picture. I used PETG and it's holding up nicely. Thanks to some lovely printers…
I added the straightener teeth on both sides because they tend to wear out with use. This way, a single print serves the purpose of two.
Get the original: https://www.printables.com/model/441731-pet-litter-scooper-no-supports New! Super Scooper Squared! https://www.printables.com/model/468026-super-scooper2-no-supports/files
The idea behind this item is to be able to: Weigh my coffee beans with my Acaia Lunar scale (dimensions are so it fits the scale well). Feed it into my grinder with a steady beans stream. Usable capacity is around 70g of beans. I use it…
The Ultimate Creatine Scoop is a fully parametric, support-free measuring scoop designed for creatine (or any fine supplement powder of the same density). Built in Onshape and publicly available, you can easily duplicate the design and…
Base ramp insert for easy filament debris removal, one piece design. Can be printed in one piece on the bed of X1C, P1P and P1S. Designed for optimal fit and easy install. Best in PETG for temperature resistance, added print profiles to…
The ammount of protein in the scoop depends on how much you fill it. If you fill it like a “bro” you'll get around 15g. If you fill it just to the brim you'll get roughly 12.5g. Enjoy!
This is a mostly 3D printed wind generator. It includes a 3D printed alternator with hand wound coils and magnets in a halbach array. A build guide can be found here: Hackaday article here:…
The cat's expanding waistline was entirely my doing because I couldn't resist filling its bowl whenever it gave me the "feed me" look. The vet had the audacity to prescribe a strict portion of 1 dl of cat food per day: 0.5 dl in the…
Simple but sturdy washing powder scoop. May have other uses.
Nothing special needed with this, print, it's quick.
Filament need cca 7-30m. Use brim. Size width x lengt (mm) 42x141 (A,H), 70x164 (B,I), 60x197 (C,J), 100,x212 (D,K), 72X215 (E,L), 120X229 (F,M), 160x229 (G,N), 55X180 (O), 75X183 (P), 64X188 (Q), 98X189 (R), 90X223 (S), 128X221 (T),…
Wind scoop / wind shovel / windschaufel Measurements are in the pdf file!!! Print with UV resistant material and with support!
Kitty litter scoop to separate intact pine pellets from the spent sawdust. Not designed to remove waste from other types of litter but it may work for that, your mileage may vary. Print Settings Printer Brand: Monoprice Printer: Maker…
A Mini Herb and Spices Scoop. No special settings needed. Happy printing.
Can be swapped directly out with the original claw attachment pieces. Created to scoop more beans!
Features Scoop Volume : 70 ml Robust : 2 mm Wall thickness Slim design for high slim boxes Long tip to reach corners Low Material Usage: 23g Print Settings Layer height/Resolution : 0.2 mm Infill : 100% Material : PLA Support : Not needed
Lopatka na kočkolit. Cat litter scoop
Remix of the grain scoop by tray_withdraw at https://www.thingiverse.com/thing:3544205. Closed the hole in the handle, greatly increasing its strength and keeping stuff out of it.
I could not find here a model of a bonsai soil scoop that would satisfy me, so I've created my own. The base has 5 cm of diameter. The height is 17 cm. Cut is at 45 deg angle. Enjoy!
A slide-to-drop scoop designed for easy and mess-free transfer of powders into bottles, shakers, thermoses, or containers. The scoop features a sliding bottom: simply collect the powder, place the scoop onto the bottle opening, and slide…
Take a look to my new and complete redesigned spoons here: EN: A spoon that holds about 15g of powder. The spoon is an improved version of my “old”, smaller spoon. If you like my model(s) please leave me a like to support my work. Thank…
It's pretty simple but I wanted a robust scoop, cause they get thrown around and generally abused a lot and this stands up to that.
Supportless print. Scoop with wide hole, dispense with small hole.
Scale to ANY SIZE - it prints without supports! Printing on it's face is faster and allows for larger sizes. May also make the bottom stronger with diagonal layers. Also Check out the classic Super Scooper:…
This scoop is an upgraded version of my previous litter scoop. https://www.printables.com/model/680766-hexagonal-cat-litter-scoop Changes from V1/V2: Thicker walls Holes at the back. Got feedback that sand got stuck at the back. Threaded…
A modern curved pet food scoop that is printed upside down. This way no supports are needed. The curved shape prevents the pet food from falling out when lifting. The standard dimensions are 173mm x 80mm x162mm . Freely scalable according…
A scoop I made to feed my dog but could be used for anything really
A 2 tablespoon coffee scoop. A fairly easy print. Also, fully customizable in Fusion360. Category: Household Supplies
Scale to ANY SIZE - it prints without supports! Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers. The Super Scooper Squared has an oversized grip based on user feedback. Original Super Scooper…
Set of ice cream cones and scoop for your summer sandbox party! You can use scoop for creating your original sand ice cream - just put created sand ball to the printed cone (you can choose between two modifications). Printing: Print the…
UPDATE: Model has just been updated to our latest design. It's improved and should work very well at .2 layer height with PLA such as Sunlu PLA+. Note: Some mechanisms were designed for .2 layer height so if you're using adaptive layer…
I recommend printing it in PLA with the following parameters: 4 walls 0.15 layer height no supports
Sturdy detergent scoop. Comes in two models, solid and hangable
Create dry measuring scoops in any size. (common sizes provided as examples) Pre-published STLs print nicely at 0.2mm layer height, no support, no brim To customize: install OpenSCAD and Overpass Font (Optional) create MeasureScoop.json…
New updated version with larger air intake. Now supports both 18" and 19" wheels and also both the original smaller brake calipers and the larger brake kit (see note below). For 60mm hose (inner diameter) PRINTING: Can be printed without…
remixed to be one part without hollow innerts
Designed for either 1, 3, or 5 8x3mm disc magnets . 8x2mm, 8x1.75mm, and 6x2.5mm models are also available If you're using an Opal 2.0 Side Tank, there is a convenient metallic pad under the top plastic cover. In this configuration,…
Derived from my other model “Divided Gridfinity Boxes" but now have added Finger Scoops for getting small parts out of the boxes easier! Included source code and a random selection of box sizes and divider configurations. #adjust these…
This is a straightforward print that looks good with a range of layer heights, but supports are required. My preferred printing orientation is with the greyhound logo facing up, and supports underneath the handle. Alternatively, you can…
Simple measuring cup for dog/cat food. This model is designed for 1 cup, 1.5 cups, and 2 cups.
This model is a simple powder scoop with a 2-cm channel through the handle that allows the powder to be funneled quickly and cleanly into a bottle. Useful for most powdered drinks, such as sports drinks, lemonade, or protein powder. This…
Here are 2 models of a scoop that could be used as a small candy scoop or for baking dry goods. One is a 3d scan of a typical metal scoop you would find in a bulk food store. The other is modeled with the same volume but less rounded and…
Updated version of 5g Creatine Scoop v3. The volume of the cavity still holds exactly 5g. The handle was lengthened and returned to the original shape from v1. Perforated handle allows for strength and saving material. The lip of the…
2 foot chips in a scoop sphere design. These are extremely technical. Category: Sport & Outdoors
Cat litter scoop The cat litter scoop I bought was difficult to use, so I made one. The following points were emphasized. ・ Sand falls ・ Being hung on the edge of the toilet ・ Be as small as possible I hope it helps you. 2022/5/1 update…
Here is useful Scoop I designed in Onshape.