3174 modeli
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This model includes almost all of the deployment steps of the James Webb Space Telescope including: Solar Panel Antenna Fore and Aft Sun Shield Pallets Left and Right Sun Shield Boom Extension Aft Momentum Flap Tower Deployment Secondary…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple gyroscope fidget prints in about 45min and spins remarkably freely. I usually carry several of these to give away as gifts, and they are some of my most popular prints
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Wydruk około 3,93 €–4,80 € nettoWstępna wycena jednego wariantu
Single-piece adapter for mounting a Sony E-Mount camera to a 1.25" tube. Thanks to this model/designer for the e-mount geometry. Designed for and tested with a Sony a6000 and Celestron NexStar 5SE, but should work with most E-Mount…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updates! Reorganized parts listing for clarity About After spending some time trying to use a telescope camera with the wonderful Hadley telescope by Maff , I decided I needed a focuser that didn't rotate. Rather than wait, I decided I'd…
Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu
EDIT 03/04/2023 Added f3d and STEP files so these can be remixed. __________________________________________________________________________ Designed a system of parts to create a means of mounting the Hadley to a tripod in a very sturdy…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
This is an easy to print JWST model with mirrors and support structure as they appeared during assembly and testing prior to being covered with protective material for launch. My way of teaching myself to use reference images for 3D…
Wydruk około 8,34 €–10,20 € nettoWstępna wycena jednego wariantu
Who doesn't love a Bug-A-Salt fly killer? I love mine and I love the looks I get when I bring it out and eliminate those pesky flies and other bugs. Just for fun, I made this snap-on version of a rifle scope to make my Bug-A-Salt even…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena jednego wariantu
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
Made out of PETG for Flexibility and Heat Resistant Hardware: 1x M3 20mm cap head screw 1x M3 nylock nut 42mm Zoom ring:
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This is a stylized version of the JWST with an enlarged primary mirror with enhanced curvature, since that is the most striking detail of the telescope.
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added folding print-in-place arms. Results in a cleaner print and a more accurate model!
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
The design is sturdy and saves about 800 g compared to a metal version. The dovetail uses the Losmandy mount points (3'') of the Celestron AVX mount and has alignment stops for easier mounting at reproducible positions. The parts are…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Make it a bit easier to stand your Hadley on the ground without the worry of tipping over. This is a remix of basically the same thing by emaxduck, however I found that model to be too small to stick onto a ½" aluminum rod. Have to assume…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vortex Strike Eagle 5-25x56 Parallax Wheel. ID of wheel is 35.35 mm. Hardware required: 4-40 x .375 Socket Head Bolt and 4-40 nut. Filament: Prusa Black PETG
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wikipedia: A Pinard horn is a tool used to listen the heart rate of a fetus during pregnancy. This is my second attempt (the first one was bigger and didn't work) and this is fully functional although some times it's hard to find the…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Meant to be used with Tripod Mounting System , this holder gives you a safe place to keep all your lens covers when not on the telescope. Socket head screws feed through the front of the holder and lead out the back. Holder mounts to one…
Wydruk około 2,72 €–3,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
Replacement knob for broken one on Rigol oscilloscope. 6mm shaft. Printed in white filament PM. Print instructions: Layer height 0,1mm, no supports.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Case design to hold one 2-in eyepiece and four 1.25-in eyepieces. In my case, I have the Svbony 34mm 72° (2in), 20mm, 15mm, 9mm, and 6mm 68° eyepieces. The case is sloped to both support the taller 2-in eyepiece while also allowing easier…
Wydruk około 15,75 €–19,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die Teleskopringe sind zweiteilig und gedacht für Teleskope mit 200mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder kleiner und alle Gewinde M5…
Wydruk około 8,77 €–10,72 € nettoWstępna wycena jednego wariantu
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena jednego wariantu
Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version. I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed. The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Those tube rings are specifically made for my Hand made Telescope which was missing Tube rings. As a way to mount hings to it, I decided to use countersank M6 bolts. Those are slightly to small for the bolts themselves which is…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed this LED light to slide into the phone illumination module for the GALILEO Modular Microscope. All of the parts were printed in Hatchbox PLA with the exception of the strain relief grommet which is PETG. Note that the grommet…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
I split the two contrast color rings so that you can use manual color changes for only 4 layers on each side. I'll attach my modified gcode along with 3mf and f3d. Note, 4 layers assumes 0.2mm layer height e.g. 0.8 mm. Attribution for CAD…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Solar/Lunar filter attachment for a Meade ETX-70 telescope. An absolute must for viewing a solar eclipse! Includes a built-in indirect sight for aiming. Use with solar film such as this for solar viewing.…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
The M2.5 screws now screw directly into the mount/adapter. Be careful about how many times you attach and detach the camera from the mount/adapter. It's not designed for that. Attaching it once should suffice. After that, you risk…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Delta-P Duct is an awesome concept. While there are already designs for fitting an endoscope camera, I wanted a system where the camera could be easily removed without disturbing the extruder cooling and restore the excellent view of…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To assemble this mount, you will need five M3 screws . I recommend printing this with ASA. It is designed with a slightly higher profile, allowing you to use iron sights even with larger scopes. It locks onto the Kar98k using a 3D-printed…
Wydruk około 4,71 €–5,75 € nettoWstępna wycena jednego wariantu
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, Here an enhancement of the camera mount I designed for my 3D printer Creality Ender 3 S1. The previous version had some weakness, like the camera support, too thin, and a bad angle view. I operate a new design with a better support…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Locks the probe in the 10x position saving the headache of having to constantly check.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This is an experimental device. Use with caution on your own risk. Verify dimensions of the particular device before printing. Manufacturing instructions: Ring: Material: TPU, 40D or other softer flexible filament. 3D Printer: FDM 3D…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚠⚠ DON'T LOOK AT THE SUN WITH A TELESCOPE ⚠⚠ I can't stress that enough. Serious damage when used improperly. This was designed to go on top of the Hadley Telescope . This adapter specifically fits the SVBONY SV229 Solar Filter . It needs…
Wydruk około 4,51 €–5,52 € nettoWstępna wycena jednego wariantu
Designed for the TPO 180 Ultrawide telescope, which is also called the Askar FMA180. It won't work with the new Pro version. Clamps around the reducer and the right position is at the back of that section. This give you more room for a…
Wydruk około 12,67 €–15,49 € nettoWstępna wycena jednego wariantu
DanAndersen remixed Arie Kanarie design for this fantastic mount but I'm already using a VESA adapter for the microscope and wanted to use the flexible LED lights with my metal soldering station. I added a few more steps to his Fusion…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
These are two different designs that are meant to go over the standard knobs used on Losmandy telescope mounts (i.e. G11, G8, etc.) in order to help with comfort and leverage, particularly during loosening. Especially during the winter…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnetic rifle scope with fron 50 mm and rear 44 mm diameter. You need 12 pices of gagnet 6x2mm (Aliexpress) - https://www.aliexpress.com/item/1005005884332595.html?spm=a2g0o.order_list.order_list_main.15.8b511802zbc0Fz Scope is Meopta…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Grommet with tapered bore to fit Jiusion USB microscope from Amazon. Intended to relieve focused pressure on microscope from two set screws. Improves stability during focusing.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu
We bought this microscope 8years ago, it came with a poor ccd with VCR connector. Since the original shop is closed now, I don't know the correct type lens to replace the CCD lens for camera. The most simply way is to add an adaptor with…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Replacements for the screw covers on the handle of TEK314 storage oscilloscopes.
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena jednego wariantu
The outer ring of a friends telescope golf ball collector broke off. I designed and printed a suitable spare part, so I could repair the collector. 0. Preparation To take off the original outer ring from the telescope rod, you carefully…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
This is an add on slide-in/out stage for the Universal Microscope Stage (USM) that includes a hole for light and three smaller holes for the attachment of a stage caliper. LED light “HeHe” Traffic safety Walking LED (Amazon) ""Pomya"…
Wydruk około 6,96 €–8,50 € nettoWstępna wycena jednego wariantu
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed something to protect my solar filter… so I designed a rudimentary one in Prusa Slicer. It’s not great but it works for me. The slicer wouldn't export a .stl file for the bottom piece, so I only have the bgcode file for that for…
Wydruk około 7,65 €–9,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Leica M320 surgical microscope is state-of-the-art technology. Nevertheless, hazards can arise during operation.
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
The leg combination part of my sons telescope broke and I made this part to replace it. During the print it pauses to be able to drop the nut in. Just remove the support structure with pincers and drop the nut in and continue to print.
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
This is a James Webb Space Telescope that only uses 3d printed parts for the outside and center piece. I wanted a version that wasn't entirely 3d printed so I used wood as the back board which allowed me to save money and plastic. Sizing…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Wydruk około 4,10 €–5,02 € nettoWstępna wycena jednego wariantu
Zeiss LRP S3 4-25x50 Scope Parallax Wheel. Hardware required: (1) M3 x 5 mm button head screw.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 29.05.2023 . I do not use this design anymore because I made a superior model shortly ago. I recommend not using this model any longer and suggest you use my best nozzle cam (and still the most affordable solution) . Problems with…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
##WTF !!This is a Option of the Following Stands. (My prebious Item) https://www.printables.com/model/873777-stand-for-apexel-800x-zoom-digital-scope Please make it Wall = Over 1 < Infill =Over 20%
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
0.8 MOD gear 150T for the Pentax 100 SDUF-II telescope, which can be applied for focus automation. Note: To rotate the focuser, one could apply Gemini Astro's motor with 0.8 MOD gear 40, which has the sufficient torque for rotation
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wireless hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
vnitřní průměr 77,3 mm stěna 2,5 mm plná vnější průměr 82,3 mm hloubka uvnitř 15 mm dno 3 mm celková výška 18 mm
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
That's a very simple model of a solar cover for my telescope's finderscope. External diameter of the finderscope is about 57,5mm, so this design is rather tight fit, but it's quite easy to put on thanks to small internal curbs - visible…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
This is a wired hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Makes work easier when I park my LOMO stereo microscope when doing smd repairs with different pcb height. This is because of the installed LED ring illuminator ring depth when I park the setup on the side of the bench while keeping the…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an emergency fix; this part is not supposed to replace correct original manufacturer's part. Manufacturing instructions Material: ASA 3D Printer: Any FDM 3D printer capable printing ASA Slicer settings: no supports Post processing…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is a fidget gyroscope. It spins and doesn't have any pins so you can rotate it in any orientation Notes: The proportions change as the number of rings increases. The smaller the number of rings, the smaller (in height) I made the…
The Hubble space telescope , the largest single big metal tube currently in Earth orbit, has been gazing into the cosmos since 1990, taking some of the most influential photographs of our time. The first in a new series of model kit cards…
Official metric remix of Maff's amazing Netwonian reflector telescope nicknamed “Hadley” . Make sure you go and read his Printables post too, as well as the #hadley-instructions channel on his Discord server , as it includes some extra…
Looking for the perfect gift for a doctor, nurse, or medical student? This pen holder, shaped like a doctor's bust complete with a lab coat and stethoscope, is the ideal desk accessory to add a touch of professionalism and charm to any…
Model for broom handles from 18 to 26 mm with new system to avoid gear leakage. If you like it, a like would be appreciated Thanks.
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
Shock Cord Scope/Light Cover "by" Qwerm A shock cord retained cap for your light or scope based off of One Hundred Concept's ScopeCap/LightCap/ShockCollar. Included in the release are various sizes ranging from 30-70mm in 2mm increments…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…
This scope attachment allows you to shoot and record scope view simultaneously. It uses a semi-transparent mirror to send part of the light to the camera and the rest to the shooter's eye. The attachment is a modular design consisting of…
This is a 100% 3D printed phone holder for microscopes, designed to make capturing images and videos simple and precise. The mount allows smooth adjustment left, right, up, down, and forward and backward relative to the microscope lens,…
These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
