64 modeli
I've re-created a ZoomGear for the Sea Frogs Sony housing (https://seafrogs.com.hk/) Lens Support: Sony FE 16-35mm re-used the gear part from https://www.thingiverse.com/thing:5850202 and added a cylinder to match the lens diameter Add a…
Wydruk około 2,73 €–3,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Catan is one of my favorite board games of all time, and even thou there are already plenty of version of 3D printed Catans out there, I really wanted to make my own. I found a lot of inspiration and I have remixed a lot of designs that I…
I wanted to make the sails the player color rather than the ship. The seafairers multimaterial ship has the foam under the ship shared with the sails so that'd make the foam look funny. I edited the Tinkercad source files to remove the…
This insert is for Catan PLUS (2016) that includes the 5-6 player expansion, two new maps (in this case are Mallorca and New York, but it depends on the country I think), two mini-expansions “Frenemies” and “Helpers of Catan”. It also…
Trying to stay organized as you sail the high seas of Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
Erweiterung für (mein) Catan - Überarbeitet für Multicolor. Das Original wird weiterhin benötigt. Basisspiel wird benötigt. Von mir erstellte Erweiterungen: Städte & Ritter Verpackung Multicolor in .3mf, Einfarbig (mit Einprägung) in .stl…
This insert requires minimum recourses while being very sturdy. Fits Catan base + seafarers tiles (total of 51 hex tiles). The top guard piece prevents the hexes from falling off if you store the Catan box vertically. Design is based on…
Replacement ships for Catan Seafarers with a storage case to hold them. Printed on Prusa Mini with PETG or PLA. Supports not needed when orientated correctly. I used 20% infill.
I printed some of the Catan piece holder plates, but got tired of dumping them into a bag for storage and then reinserting them every setup, so I designed these stacking magnetic piece holders. They're made to fit the seafarers expansion.…
This is an option to store the Catan main game and the “Cities and Knights” and “Seafarers” expansions in a single box. The models have been slightly changed from the original, so the “5 - 6 player” function is lost, as space was needed…
Is able to hold the base Catan game, as well as the base Seafarers expansion. SCAD can be edited if you need any of the places to be deeper for other expansions. Split into four pieces for easier printing. Uses about 40 hours and a little…
Border for Settlers of Catan, to be used with the original tiles (not the printed ones!). Category: Toy & Game Accessories
My gaming group got Seafall with the intent to play it, and I was looking at the terribly boring cardboard treasure chests that came with it, and I just felt the need to do something more fun, and although I originally planned to secure…
Small MOLLE clip - SEAF (inspired by Helldivers 2) Precious as democracy itself - Blueberries lead the charge! Fly their flag into battle and show the galaxy you stand with the SEAF. Small SEAF-inspired insignia for your gear . All prints…
I liked the original design because it functions as a 2in1 storage box + tray. However it was tight and tricky to close when I added the ships from the Seafarers expansion. I made 4 changes: 1- Made the model taller (around 37.5mm). This…
We've been playing Settlers of Catan with Seafarers for years. While I was first starting to learn 3D modeling in Blender during the pandemic the piece shapes made good practice. When I got my first 3D printer I decided to design a plate…
In my Seafarers expansion pack the ships made out of plastic and not wood. Therefore I did a remix and created a modified version for the plastic ships.
| BASIC DESCRIPTION | number chits containers/boxes with lid and game type indicators for seaferers expansion of settlers of catan 3-4 players and 5-6 players | DESIGN DECISIONS | containers are designed so that the game type is visible…
Adjusted the tolerances of some of the slots, Added lids for the Chitlet holder and the player pieces, Reduced how deep
This is a box that has the capacity to hold all of the cards from the base game, Seafarers, CIties and Knights and the 6 Player Expansion. That's a lot of cards to be floating around in one box (you do consolidate all these games to one…
| BASIC DESCRIPTION | number chits sets for seaferers extension of the game settlers of catan for 3-4 players and 5-6 players The numbers for 3-4 version are: 2x"2" 3x"3" 3x"4" 4x"5" 4x"6" 4x"8" 4x"9" 3x"10" 3x"11" 2x"12" The numbers for…
Based on the Model by Matt Cooper, I made my own version of the tokens. Please note that I altered the thickness form 2.4 to 2mm. So if you already printed his tokens for the base game, you probably want to scale them back up to 2.4mm in…
Slightly remix of CATAN insert to fit parts that original insert couldn't fit: thicker hexes, more harbors and circular number tokens some of the hexes are stored in “wares tray” due to lack of other space (2x20pcs fit to their original…
Border for Settlers of Catan, to be used with the original tiles (not the printed ones!). Category: Toy & Game Accessories
A border to be used with the original game tiles (not the printed ones) for Settlers of Catan and the Seafarers expansio
I've taken the boat base from the original model (https://www.printables.com/model/304054-inserts-for-seafarers-of-catan-supports-5-6-player/remixes - all credits to @ChrisHuab_370618 ) and modeled a lid to enclose the boats when oriented…
Catan Holder – Player Pieces Holder This 3D model is a custom organizer designed to neatly store all game pieces for one player color in the base game Catan and its expansions Seafarers and Cities & Knights . It provides dedicated…
This is a storage organizer for lautapelit.fi version of Catan, the Seafarers expansion and 5-6 player expansions. The insert fits in the base box (286x286x70) with a slight lift caused by rulebook and the sea border pieces being upright.…
A pistol grip for the Seafrogs underwater housing, hosting a action camera mount and a lineard ring. The grip can be attatched using four M3 screws.
10x5 round magnets used for player boards
This model is simple no supports required just a tip i would use a raft for adhesion.
This is a custom-designed player piece organizer board for the board game Catan and the expansion Catan: Seafarers . The board helps keep all player components neatly organized during gameplay, including pieces used in both the base game…
Seaflo 300A battery switch mounting adapter - Used this in my sprinter camper van build Printed in PA-CF. Added M5 inserts in the back.
MAYE NEED TO BE SCALED DOWN FOR YOUR NEEDS. Category: Props
Desert token made to match Dakanzla's undiscovered land tokens in the Seafarers 2.0 extention. Fog island senario. https://www.thingiverse.com/thing:3072272
I am a big fan of Dakanzla's magnetic 3D Catan design. I printed a mix of his two main Thingiverse postings with a few remixes with the set I made. (I didn't include every model from the two, see his page for everything) I also wanted to…
TOTAL HIEGHT 37 INCHES. MADE TO SCREW TOGETHER OVER A 3 INCH CARDBAORD TUBE. Category: Props
VP-token for Longest Trade Route (replaces Longest road in Seafarers) Matches the other tokens, see my profile
Tokens to glue the paper harbours of the original seafarers expansion into. This extends their lifetime and makes them easier to handle. I also designed a small box to store them together with the island settlement victory points. Printed…
VP-token for when you build yuor first settlement on a new island in Seafarers expantion pack for Settlers of Catan
Some SEAFLO boxes do not contain the 25 mm connection. I have also included my freeCAD file to make it editing easier.
This is a simple wheel design that fits perfect if your printer is calibrated correctly. I printed this with 25% infill and 8x walls for added wear.
Tired of the jumbled up mess that this expansion always becomes? Have some inserts to organize that chaos! Each of these inserts nominally fit inside the factory bins, but provide an actual location for each piece (No More Piles!). *Note…
A container to hold the additional tokens from the Catan Seafarers expansion. Very similar to the source number holder, it just has a cut out to show that these tokens are for the seafarers expansion.
Found a nice organizer for the base Catan game here ( https://www.printables.com/model/1397573-settlers-of-catan-organizer-2025-edition ), but couldn't find a similar style organizer for the Seafarers expansion. 5 files, 6 prints (Need to…
Wear ring for 1990 Ultranautics SeaFlash. May need sizing adjusted to fit based on how worn your machine is. This right here is why I bought a 3D printer. I was given a non-running 1990 Ultranautics Seaflash. One of the main issues was a…
With the original design, I was concerned that boats might spill around the box if it got tipped. I created a lid for the token cup and designed it so it would keep the border pieces in place over the boats, as shown in the pictures, to…
A bar soap dish that drains itself. Your soap stays dry and firm and doesn't sit in a puddle of slime. Six raised wavy ribs hold the bar 8 mm above the floor, so air gets underneath and the bar touches only thin rib tops. The floor slopes…
Compatibility This set of inlays is compatible with the recent box version of the game. The box has a dimension of 29,5 x 29,5 x 70mm . Please check before printing, i made the same mistake :) Also check out my inlays for the basegame…
This is a zoom gear for the Canon EF-S 18-55mm f/3.5-5.6 IS STM when used with mirrorless SeaFrogs housings (wont work with DSLRs) Best is to put the gear on the lens from the camera mount side. The contact surface may need a bit of…
If you're using the Seafrogs Underwater Housing for Canon M50 with a zoom lens, and by that also the zoom gear for the housing/lens, you probably also had it happen to you (more than once) that the zoom gear sometimes slips towards the…
3D Print Files in STL format of the SEAF Trooper Helmet from Helldivers 2. The helmet features: - Assembled and casting version. - Bambu Studio Project and GCODE files to get started printing sooner! - Visor stand-in and vacuum forming…
The helmet features: - Assembled and casting version. - Bambu Studio Project and GCODE files to get started printing sooner! - Visor stand-in and vacuum forming bucks. - Default scaled to fit up to 24.5" circumference heads. - Expertly…
This is a storage organizer for lautapelit.fi version of Catan, the Seafarers expansion and 5-6 player expansions. The insert fits in the base box (286x286x70) with a slight lift caused by rulebook and the sea border pieces being upright.…
This is a custom-designed player piece organizer board for the board game Catan and the expansion Catan: Seafarers . The board helps keep all player components neatly organized during gameplay, including pieces used in both the base game…
Some SEAFLO boxes do not contain the 25 mm connection. I have also included my freeCAD file to make it editing easier.
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== File Dimensions and Minimum Print Area X/182.94mm x Y/182.94mm x Z/155.85mm This is for e26/e27 lightbulbs. You require a hanging light cord such as this:…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== File Dimensions and Minimum Print Area X/180.00mm x Y/177.27mm x Z/121.35mm This is for e26/e27 lightbulbs. You require a hanging light cord such as this:…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== This is for e26/e27 lightbulbs. You require a hanging light cord such as this: https://a.co/d/dKbt8kF You must use an LED lightbulb. 6-12% infill 5 top layers 2-3 outer walls.…
3D Print Files in STL format of the SEAF Trooper Helmet from Helldivers 2. The helmet features: - Assembled and casting version. - Bambu Studio Project and GCODE files to get started printing sooner! - Visor stand-in and vacuum forming…
The helmet features: - Assembled and casting version. - Bambu Studio Project and GCODE files to get started printing sooner! - Visor stand-in and vacuum forming bucks. - Default scaled to fit up to 24.5" circumference heads. - Expertly…
You can find my newest lamp designs for commercial use here. Commercial license for MODERN MACHINE. This is a premium model that has been released for free. ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer…
COMMERCIAL LICENSE FULL COLLECTION You require a pendant light cord with threaded rings Use mini LED bulb Fits E26/E27 SHADE INSTRUCTIONS • Do not print shade in vase mode. • 8-15% infill. • 6 top layers. • 2-3 outer walls. • Supports not…
