HDD 3.5" SEGATE STORAGE HOLDER 6x
Questo è per le unità di spessore 20 mm
- Pobrania
- 165
- Polubienia
- 27
- Ocena
- 5
336 modeli
Questo è per le unità di spessore 20 mm
Results were obtained printing with 0.3 mm layer height on a 0.4 mm nozzle in spiral vase mode. Print instructions Category: Video Games Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Filament: Monoprice PLA…
Tool-less and fully reversible mod to mount a Mini-DIN connector in place of the original RF modulator of RF-only Master System 2 consoles without the need to drill, cut or glue the original case. Can be used to provide a clean output to…
Hello, Today I have a Sega Game Gear Stand for you. The console fits perfectly into it. The logo is authentic. The printing profile is made as a multimaterial... An ornament for every Sega collection!!! I used PLA/PETG as the material. No…
A simple Sega Game Gear Display Stand.
Mein allererstes Projekt einst, jetzt überarbeitet für Multicolor. Und ein paar Probleme aus den Bemerkungen. Mit der alten Version voll Kompatibel. Die Siedler von Catan - Das Basisspiel für bis zu 6 Spieler. Das Original wird weiterhin…
Print the following parts: 1x Automa Divider 2x Birdcards 1x Bonus Cards Container 1x Bonus Cards Lid 1x Eggs Container 1x Food Token Lid 1x Food Tokes Container 1x Nectar & Dice Container 1x Nectar Lid (2x Lid ) or (2x Lid alt ) or (1x…
SEGA Master System D-Pad Versions Please check your controller against the identifier list, to see which version is required for yours. There are 3 different variants, and they all have slightly different dimensions, making them (mostly)…
Notes Fits my display stand for the Atari Lynx II in height and vertical angle.
A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…
This is a replacement battery door for the Sega Saturn. The OEM Saturn battery door's tab protrudes out further than the face of the door. This would interfere with printing it flat to get the best surface, so I designed this door in two…
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black or White PLA MAX Light Gray Variants: Rev 0 = Genesis Dongle Dock Rev 1 = Genesis and USB Dongle Docks Rev 2 = USB Dongle Dock Rev 3 = Double M30…
Print with the flat sides down, layer heights are not critical, but the smaller the more refined the curves will be. Infill is also not critical, anything over 5% is fine. You can install it without any screws, but for the best results…
Instructions This bracket was designed for the Fenrir Duo as it didn't come with any mount for me - but it might also work for the original Fenrir (untested as of now - please let me know if you do, so I can update and credit here!) It's…
This print is a replacement for the side expansion port of a Sega megadrive model 1. Print instructions Printed in 0.2mm layer height. Infill 20%. Used brim for better adherence to the print bed. Also used supports from the print bed.
Remix of the Sega Genesis / Megadrive cartridge trays, fitting 10 positions instead of 6. Note: Some cartridges may fit snugly due to variances in original manufacturing. Don't force your cartridge into a slot.
Lose one or both of the battery covers for your Game Gear? Fear not for you can now print replacements! Printing tips: Nothing overly complicated here. Just print with the flat side on the bed and put supports under the tabs as shown below.
All pieces for a full SEGA Nomad replacement Shell. Includes buttons, switch, d-pad and cartridge door. If you want to get these printed through a service (instead of yourself), I also have a Shared Project up on PCBway (images show…
Recreated the Power & Reset buttons for both the round and oval versions of the Sega Saturn (including the Reset extension part found on the round original). Someone requested this one, and was a fun challenge! They've been printed and…
Impreso en PLA, altura de capa 0.2, función cambio de filamento (M600)
A display stand for the Retro-Bit brand Sega Saturn wireless gamepad controllers. Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black, Red, Blue PLA MAX Light Gray ERYONE Sparkle Glitter Silver…
This is designed to display your Nintendo Switch Online edition SEGA Genesis Control Pad and a Genesis / Mega Drive Bluetooth adapter such as the 8BitDo Retro Receiver or the Retro-Bit Bluetooth Receiver . Printing: No supports needed.…
Due to minor details required (top gears mostly), best fit for resin printing. For some reason, on my Elegoo Mars 2 pro, out of the 20 I printed (in 2 batches of 10), only one ended up not working - I am unsure why, but if you end up…
Best results would be using a Resin printer, but they can also be FDM printed. For best FDM Results, I would use PrusaSlicer “Cut” feature to remove the SEGA logo from the back (0.3mm depth), so it can lay flat on the bed, and then simply…
Wall mountable Sega Dreamcast controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This probably could have been split into…
The Sega Dreamcast VMU has a battery life problem. It eats CR2032s for breakfast. Changing the batteries involves using a screw driver. It's a hassle to maintain. Features This project adds a battery pack to the VMU that allows you to…
A display stand for the Retro-Bit brand Sega Genesis / Mega Drive wireless gamepad controllers. Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Black, Red, Blue PLA MAX Light Gray ERYONE Sparkle…
I saw Rdmueller's design and wanted to just make the logo to go with my Sonic collection. I printed this at 300% with .2 layers. I then hotswapped the filament just as it started to do the lettering outlines. Turned out well
Remix of e_cubed99 awesome casegauge filler. new bottom and hatch system to allow the gauge to be filled without the gauge underneath. I used heatset inserts so that it would be easy to use new bottoms for filling for example ammoboxes…
Fun Little SEGA Logo. Split into segments for single extrusion printers. 0.4mm Nozzle White and Blue Bambu Lab basic PLA Donate now and make a difference in someone’s life!
Lay flat on the side for print.
Retro Gaming Light Switch Covers Transform your standard wall switches into a nostalgic homage to classic gaming consoles. This project includes three interchangeable designs: the Nintendo NES D-pad, the Sega Master System D-pad, and the…
Designed to be printed in the orientation the models come in, with supports as needed.
Sega Game Gear game cartridge holder with flip option. Flip through your collection without removing your games from the holder. Quick and easy to print. 0.4 nozzle Layer height 0.2 0% infill 2 perimeters 3 layers for top and bottom I…
Want a great way to customize your Dreamcast without needing to mess with spray paint? Why not 3D-print yourself a custom lid! The lid itself, Dreamcast logo badge, and triangle piece are all separately printable so you can use any number…
Got mine printed by PCBWay, and as you can see in the pictures they're a perfect fit for the original! Files are available for free to print for yourself, however if you want to order them, please consider using the PCBWay Shared Project…
To store your favorite games, with or without a case. .2 has got the Game Gear Logo in front.
Wall mountable Sega Genesis Mini 6 button controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This has 3 pieces that must be…
A stand for displaying your Dreamcast VMUs. The VMU snaps into place by utilizing the wrist strap connector at the bottom of the unit so it won't move around or accidently fall over. The triangle emblem piece can be printed separately so…
I haven't had the chance to print this one yet (and it's gonna be quite a difficult print as well). Made a replacement cartridge cover/flap for the SMS2. I adjusted some tolerances from the original, so it wont shatter/break as easily…
This is a storage solution for the Nemesis basegame, the aftermath expannsion and the medic character. Everything fits in the core box premium sleeved with no lid lifting. If the “untold stories” book is included there is a small lid…
I had the pins on the right Trigger broken off, and made a small model to fix this issue. Was printed on a Resin printer, and glued into place. This allows the tabs themselves to still flex a little bit, so you can insert it from the top…
Item Unit Price (JPY) Qty Total (JPY) Total (USD) PLA (PRILINE 3D White 1kg) 2,299 2 4,598 $30.35 Tweeter (high-frequency speaker) 300 2 600 $3.96 Woofer (FOSTEX PK80K) 1,573 2 3,146 $20.76 USB 5V Power Supply Cable 699 1 699 $4.61 AC…
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE…
This is a replacement for a D-Pad which had broken on my cheap knockoff Sega Genesis Controller. The design mimics the D-Pad on the official Sega Genesis Controller. Key dimensions included in uploaded drawing.
Will write more details here soon. Decals to go on top to look like an original are available here: https://retrofied.uk/products/sega-genesis-3-case-decal-set You can order these for yourself through the PCBway Shared Project as well:…
This is a remix to fit a 3,5" IPS Screen KIT (e.g. Hispeedido Model) into a Sega Nomad
- The one ring that should have been them all- Design Goal Designed a ring for the Prusa Printers flash contest. My goal was to make something nerdy yet simple/elegant, at which I think I succeeded! Printing & size The inner diameter (ID)…
Update October 2022 replaced mid for support of the new Fenrir Duo This is a custom mount for the Fenrir and Phoebe/Rhea on a Sega Saturn. You will need to source a SD Extension with mounting ears, 4 #4x1.25" or M3x30 screws, and 12…
Shell for turning Sega Game Gear into a console using the following parts. https://console5.com/store/sega-game-gear-controller-port-adapter-pcb-kit-for-genesis-mega-drive.html https://etim.net.au/ggtv/ggtv.htm
I remodelled the Master System 2 Power Switch, and made a variant which can fit a 5mm (or 3mm with a lot of hotglue :P) LED. I added some slots in the shaft so you can have the LED's legs stick out through there, and not have to worry…
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
This is an remix of https://www.thingiverse.com/thing:3208337. The thing i've added was the use of an USB-C PD trigger.
I wanted to showcase my DC console but the angles on my shelves are a little weird, so I came up with this model. It raises the console off the surface by a few centimeters and displays it at a roughly 15 degree angle.
Ladies and gentlemen, I present to you the Sega Dreamcast VMU battery cover! Painstakingly re-created from scratch down to (almost) every minute detail! From the pointless little circles to the battery tab slot to the ever-so-slight angle…
-- !WIP! -- Replacement power button, modelled after a SEGA Nomad button. Please note, due to being such a tiny object, you need support, print as slow as possible, and have the smallest possible layer height. Update 4/30/2020 Added new…
I wanted an M30 stand to match the awesome 8bitdo SF30 stand here ( https://www.thingiverse.com/thing:2777612 ). That doesnt allow remixes so can't list as inspiration but used all the ones listed as either source material (for the…
This saturn cartridge are reference from original saturn memory card you can put your flash card or extended RAM Cartridge PCB on it PS.the little 4 pillar on corner was add to prevent warping,you need to cut it off after finish Category:…
A base I 3D modeled for a Rei Ayanami 1/7 scale figure that has a really huge and cumbersome base that takes too much space on my shelf. The figure is this one ( https://myfigurecollection.net/item/199818 ). Designed a simple round base…
A simple Game Boy DMG dpad adapter for a Sega Master System controller. The model is split in two parts because I hate supports. Use a drop of super glue to join. A DMG membrane is required, but you can also use an NES dpad. Requires no…
The rear “actuator” plate behind the D-pad on the Retro-Bit Sega Saturn Wireless / Bluetooth controllers is known to crack , when this happens that particular directional will be inoperative. Printing: Print in PETG or PC. Note: PLA, ABS,…
🕹 Stackable Sega Genesis Game Storage – Support-Free Print with Dust Covers Level up your retro organization with this custom-designed storage system for Sega Genesis cartridges. Each unit is built to hold individual games securely and…
New Design for a Bracket designed to fit the Console5 composite LCD screen (big driverboard variant) inside the SEGA Nomad. https://console5.com/store/universal-3-5-composite-video-lcd-module-320x240.html Print Settings Printer Brand:…
EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modelo Eu só peço para me seguirem nada mais obrigada e eu farei o mesmo. FR - Merci…
Here is a simple "Sega" logo to decorate your gaming room at home! No MMU is needed for multi-color printing if you use the filament change function in your printer's g-code. The logo can be printed with either 0.2mm or 0.3mm layer…
A simple and clunky stand for Sega GameGear console. Sorry I don't have a better pic right now.
A new VMU holder design for 2024 has arrived! This one ditches the simple square design of the last one and adopts design elements from the Dreamcast case and VMU to make what could almost pass as an official Dreamcast accessory!…
Source https://www.tinkercad.com/things/cb55SPayMos You can print it as two-color-version or as white and then paint it.
I have been working on display stands for various controllers and decided to do one for my VMU I printed 0.2mm layers at 15% infill, no supports are required. Category: Video Games
** Update from 11/Sept/2018 New version A lot of sizes corrections and position adjustments Adding space for GG Everdrive micro SD card Adding pegs to clips the to parts Adding TOP variations: a simple without logo, a SEGA and a Krikzz…
The best way to store and display up to 10 Dreamcast VMUs or memory cards! Completely redesigned from the ground up, my new VMU holder has slots with a snugger fit, snazzy rounded corners, and a new customizable design for the front. Two…
Created a stand for the Sega Genesis/Megadrive Model 2. Enjoy! default is .16mm HQ, speeds are lowered to help with peaks – some supports on the crossbar (they're easy enough to chip off) ⚠ License Notice This model is provided for…
Update 3/23/2020: I have since making this started to learn Fusion360, and have recreated this model (v2). Along with some Quality of Life updates to the file (namely to the supports that hold the LCD to the mainboard - 1.5mm holes and…
Print supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…
Made a case for my OctoPi implementation. Not much on ventilation, but the pi stays under 63c at full load with ambient temp of 21c (70F).
This is a remix of a MD1 usb-c mod I found and used as a base. SEGA Mega Drive MD1 Genesis 1 USB-c PD Board Power Mod Uses HW-398 Black PD board with 9v-20v max 5a I like these boards because they are 5V-20V, so they can be used for most…
Instructions This bracket was designed for the GDemu, the one I had was the recent release from AliExpress, please let me know if it doesn't fit yours and I can adjust the base as required! It's designed as modular system, and the…
Designed this to hold 10 Sega Game Gear carts Printing: Your choice of material, I used PLA. No supports are needed and super easy to print. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .3…
This speaker mount reuses two screw posts from the front shell as anchor points. No cutting required, just drop the mount, install a second speaker (either standard or premium - see below for explanations), run the wires along the shell…
Sega Cartridge Holder hold 10 carts
Enclosure for a Sega Genesis / Master System SNAC adapter for the MiSTer FPGA system. You can find the PCBs here: https://github.com/blue212/SNAC-adapters
8BitDo M30 Gamepad controller for use with Sega Genesis / Mega Drive or Analogue SG.
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/hn8a9pwTwkK Instructions This is a filter holder that will fit Ilford filters. It will replace the red filter on the enlarger and therefore it may be fitted…
The back piece to a Sega Saturn Dpad. Category: Video Games
Sega DreamCast Controller Stand + Cable Holder
The JST VL power plug housings for Sega Naomi arcade system seem to be out of stock. So I had to create one for myself. ---------------- 3rd-Party Parts I used pre-made cables with headers from DigiKey. Part No. is ASVFSVF14K203 [ US ] […
Install a DC Jack in the original PSU port on the Saturn Category: Video Games
a retro logo i made, couldnt find one i wanted so i had a go at doing it myself.
As many Sega collectors will know, the short lived theme park Sega World Sydney merchandise can be hard to come by (and expensive when it does!) I decided to have a go at recreating the easily recognisable logo with the help of 3D…
After remixing the SNES display stand from @jordanhoff I wanted a similar styled stand for my SEGA Genesis games so… here we are. Trying to showcase the artwork has it's challenges making the stand be much taller than the SNES version and…
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
This model is for the classic 3-Button pad, with approx. 1.20 m long cable. The cable makes two turns and then the connector fits gracefully in the allocated slot.
This is a simple drop in replacement for the original Sega Saturn cartridge door. It's designed to print easily without supports on FDM printers. There are three parts, the cart door, left arm, and right arm. The arms slide into the cart…
A fairly accurate model of a Dreamcast VMU that I created in Sketchup.