180 modeli
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
I changed: • the location of the tail is moved lower; • the shape of the back handle; • my top handle (shape closer to anime); • my tail cord; • made a model of supports for the tongue, teeth and rear hole for the back handle. It is…
Baby Deadpool is my first design where I'm offering separated parts along with the usual files. Just use our separated parts, slice, and print them. After printing, fit the parts in their place. If they feel a bit loose, you can use some…
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…
Full credits goes to https://cults3d.com/en/3d-model/art/chicken-park-natcko I didn't want to paint this and I didn't manage to change filament color during print, so I just cut the original file in 4 new files. Just print each file in…
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
I re-created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. This V2 model has the eyes and eyebrows separated so that you can print them in a different colour! To print I…
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
Collapsing Katana all the parts separated. No vase mode Required.
Coaster set remix
I separated the files as I too was looking for a couple of pieces out of this assortment the original creator made. I've included his original file in the STLs as well, most of files in the original seem to repeat so that is why there are…
I separated the teeth in blender for us peasants without a multicolor printer. Printed on my Ender 3 V2 NEO.
This is a remix of https://www.thingiverse.com/thing:3082571 to split the helm and facemask into separate pieces to allow printing in different colors.
Spent a bit of time in Tinkercad splitting up parts and cleaning it up so that it can be printed separately in different colour filaments. The model itself is still massive, so be sure to change the scaling the same for each model if you…
💰You can access the commercial license anytime by joining my Patreon at the Merchant Tier or higher. However, the AMS multicolor version and the version without the keyhole of this model are only available for free by joining at the same…
This is a remix of Keenan's great lantern model. I separated the the cross hatch panels in order to get a cleaner print. Otherwise the model is the same. If you want the model with the socket, download the base from the original.
Team Fortress 2, Engineer PDAs 1:1 accurate Designed as a prop replica that you can simply print and put together (glue required) Destruction: full size : 14.8cm x 9.8cm x 3.5cm The antenna extends and the button can be pushed via a…
Cosplay Mask – Inspired by "Scream" (Ghostface) Note: Models labeled with the “Preview” prefix are meant solely for 3D viewing. These files are not suitable for printing, as they are low-poly and unsliced. All required printable models…
All Parts like rings, lid and bowl separated and repaired for easy printing. All parts are separate STL file. All credits to original designer @3_D_Ideation .
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
( originally posted on my Thingiverse ) Remix of my origin “Screen Accurate R2D2 Dock for the Amazon Echo Dot 3”, this time I've separated the colours (White, Silver, Blue and Black) so they can be printed and glued into place. The whole…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
🎨You can find the multicolor version of this model on my Thangs page. https://than.gs/m/1330823 💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above. 🔔The keychain…
Rather then painting the original model ( https://www.thingiverse.com/thing:2994999 ) I just wanted to print the teeth in another colour. My prints were at 50% scale, since that is the scale I printed the original design at. These did not…
I removed the connecting mesh and split into larger pieces to comfortably fit a 200x200 print bed. Included some close-up pics to help with assembly. Print Settings Printer Brand: Monoprice Printer: Maker Select **Rafts:** No Supports: No…
Put the Blades (Biggest → smallest) in the “opening”. Close the “opening” with the cover with Glue The individual Blades might get stuck inside of the other, but can be pushed back in the Handle with a little bit of Force.
Message me if anything needs changing or write in comments
Print the orb with no infill. Try and avoid supports for the Orb as supports added some ugliness that appears when lit. Should fit a standard electric tea candle for a soft flickering glow.
You will need these: 6 m3 x 30mm 2 m3 x 20mm 3 m3 x 10mm 3 m3 x 8mm 15 porcas m3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Toys & Games
💰You can access the commercial license anytime by joining my Patreon at the Merchant Tier or higher. However, the AMS multicolor version and the version without the keyhole of this model are only available for free by joining at the same…
Remixed @BlackHeartCon_260800's model to separate the blade from the hilt (I used this to make a glow-in-the-dark blade) for a Hobbit costume. A very easy print with no supports. Parts to Print: Blade x2 Hilt x2 Tang x1 Support x6 After…
A version of this model with separate parts so they can be printed with different colors without an MMU.
Remixed the Gonk GNK Power Droid to have separate parts for easier printing without support material (both solid and hollow top and bottom parts available) as well as movable legs.The legs push fit in and provide enough resistance to hold…
Took Meatthermometer's file (love his work!), and split it into two separate databanks to give some more options when setting up a scene. Super simple modification, but I thought I'd share. Thanks again to Meatthermometer! I also made a…
VortyZA's Corner clamps are great and really helpful but the original model comes only as an STL with all the components together. I like to print pretty tight so I was annoyed by this decision i separated everything into 3 files so you…
This is a blade for the Collapsing Lightsaber (Removable Blade) by 3DPRINTINGWORLD. The segments are separated from each other to help aid in the printing in case your printer can't handle the clearances. This will allow the blade to…
Princess tiara with separated gemPrincess tiara with separated gem
💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above. 🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring. 🔔This model requires keyboard switches…
💰You can access the commercial license anytime by joining my Patreon at the Merchant Tier or higher. However, the AMS multicolor version and the version without the keyhole of this model are only available for free by joining at the same…
Separated all the figures from original file which had them all bunched up and really close to each other. These are ripped from game files so the resolution is low. Originals summary: "All 20 of the bobbleheads in fallout 4 riped…
💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above. 🔔Please follow the assembly image and make sure the raised joint pieces are facing upward, with the…
Grogu Halloween version I repaired various errors that made the surface difficult to print. I also used the separated head version so I could print with fewer supports.
needed to separate files for individual printing in different colors print 8 pins, 4 large gears, 4 small gears, and 1 center piece Post-Printing could benefit from a few oil drops Category: Engineering
Saw somebody in the comments section of the Team Dark amiibo model set ask for a version with the pole separated from Shadow. Since I was bored, I loaded the STL up in Blender and was able to split up the pole model and the Shadow model.…
The slugs that were presented to the daughter of a friend laid eggs. I thought it was a good idea and babies should hatch from the eggs. That's how this remix came about. Kid made from the tail. Therefore, less mobile than the…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
Only want a pickaxe? or a sword? Well, now, you don't need to print them all to get the one you want! Category: Other
It is exactly the same as the original design but I converted it from STL to 3MF so one could print the parts individually instead of all at once. I wanted my vice multi-colored and different parts at different print settings. By popping…
Note : This is a remix of “Seeds Organizer” by @ Yoann (https://www.printables.com/model/363850-seeds-organizer). I have separated out the components of the model into individual STLs so they can be printed individually ---- Original…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
3 Files are full black: Shaun_Head_black_1 Shaun_Head_black_2 Legs_V2_1mm_thick 2 Files are full white: Shaun_Head_white_1 Shaun_Head_white_2 The file Shaun_Head_white_black_EYE you start with white, and the last 3-5 layers you change to…
Based on the the updated version, I used Tinkercad to disassemble and customize the case into individually printable parts. It is held together with hot melt inserts and M3x6mm screws. For the support strut 2x M3x8mm are needed. The fans…
I separated the fire/tar/coals from the cauldron so they could be printed in whatever color you choose.
Invincible logo with separated letters. So this can be made without using an AMS system.
Simply used Tinkercad to separate each bat from Faberdasher's trio o' bats. Did this because I wanted to print larger individual bats. Category: Decor
Nothing fancy here. I just wanted to be able to print the bolts for this model individually since I was having some trouble with the tall ones failing. I used the cut tool in Prusaslicer to separate the models and then saved them…
Split into 3 parts and added slot for bolt in handle and hole for embedded nut in blade. Intended for 6-32 hex head machine screw and a 6-32 hex nut. You can probably omit supports on both blade and hilt. They're small enough holes. Guard…
I've been asked for at separated file where the nametag and base is separated so it easily can be printed in different colors.
Here is my video explaining the process of making such wall arts:
Remixed model from printedobsession's sculpture separated using blender. The Models should auto orient into the correct way to print. Supports should still be used for the hair and body/head, but not the hands/arms. Manual trimming will…
I've split the original parts so they can be printed out separately and to allow moving them across the plate and rearrange, so they can be made to fit your plate. The small lugs have been separated in two forms: all four or a single lug,…
Another remake of this model separated the cat lifting mechanism to make it print better. I found that the arms were still too weak so i made them stronger. I also added a key hole in the back. print all other parts from the original…
This paddleboard fin is separated so the fin can be printed flat to take advantage of the layer line strength. Glue the two pieces together and attach them to your board with the clip from the source thing:…
I am happy to introduce you to the new Stegosaurus model! A dream for every 3D printing enthusiast without multicolor printing options. This Stegosaurus is completely printable with a simple single extruder printer and the result is…
Coin Sleeves for US coins in separate files I took apart the coin sleeves file to separate the individual denominations so that they may be printed in different colors, and one at a time. Print Settings Printer: TRONXY 802E Rafts: No…
Poe Dameon's black 1 t-70 X-wing starfighter
Greetings Helldivers! To protect our managed democracy I have split the Armoured Charger model by parts. Now it can be printed at a larger scale and with higher quality on most of the surfaces due to minimizad overhang. The model…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Separated files of "Lautrec_996" model of the Good Samaritan.
The left and right side have been separated so each fan has it's own path. No other changes made.
Might want to make the tail slightly smaller as it doesn't fit well by itself, will fix later. 6/21
Separated colors for easier painting. Needs to be scaled down likely. Also included is Bambu .3mf pre-painted
Enlarge the hole and add a divider
I slightly reworked the stellar render of the lightsaber concept, by kawbabbitt90, to be printed in segmented pieces for different color filaments. Its been resized to be comparable in size to Yoda's lightsaber, altho its a bit bulkier,…
The arrival of summer and soon my first-born son, I got nostalgic and remembered these water squirting prank rings from my childhood. Now I can relive those happy summer days and so can you! This is a variation of my print in place Prank…
Original model https://www.thingiverse.com/thing:4672484 I originally tried to paint this model in Prusa Slicer but there are a lot of nooks and crannies making it almost impossible to get 100% coverage. I separated out 44 different…
I decided to take the .step files and piece out all the components for the V6. The lens cone is specifically for the Fujinon SWD 75mm f5.6 lens. You will need to print a different lens cone if you do not have that exact lens.
This can be printed on any machine for a multicolor finish. The pieces are properly resized. The inner section looks and is a bit ugly to print because of thin walls and holes, but I figured its okay since it will be unseen. It is also…
bencolt45's pandemic organiser is great but I wasn't a fan of the two-in-one lid for the tokens and research stations, so I split them into two separate lids. This upload only contains the two lids – please download the rest from the…
The original design by Diogo Sergio is just fantastic! All I did here was split the model up into a few more pieces so that they can each be printed in the proper color, rather than requiring paint. All except for the upper grip, that is.…
Original Author: montylpettit Original Author Profile: https://www.thingiverse.com/montylpettit/designs Original Design: https://www.thingiverse.com/thing:2670271 THIS DESIGN IS NOT ORIGINAL AND HAS BEEN MODIFIED FROM THE ORIGINAL. THE…
it's deigned so that the top comes off like it does in the show it's split into pieces that make it easier to either print in different colors or paint
Upon printing my PIP Confetti Cannon the lid and base were melted together during printing. This was due to a common scaling errors and PETG Printing. Therefore I created this model of the same party confetti cannon with a lid printed…
Uploaded by request, Chuck Hellebuyck's Christmas Countdown Calendar separated by colour, for printing each bit in the appropriate colour and then sticking them together with superglue. This is a very fiddly process and I wouldn't really…
I separated the base from this model so that you can print the base in a separate color than the spiral. I did this because my turn table is white and I want the base to also be white. Please import your model, select the correct…
The Mirror Shield from The Legend of Zelda: Majora’s Mask. A project I worked on to separate each color for the model into separate pieces so pieces can be printed out in their own color (no painting / minimal painting required to post…
I learned from the past few that I've uploaded, just splitting in half is really annoying to print, so this is separated by color. Look out for more lightsaber models coming soon (I have 15)
1 Version as a polished exterior - 1pc 1 Version with separated Top and Bottom, hollow interior to be a container- 2pcs
you can print the model in white and use acrylic paints to paint each part as you with. or you can print the model directly if you have filaments with the colors white, black, grey, and blue. note that the black ring has a perfect fit to…
please download and like! check out the other free sculpt 3d print in my profile :) sculpted by albaro_3d I'm sorry, I'm not sure specifically how to print it, a friendo of mine already printed and it worked doing a little bit of easy…
Already having issues with my printer and my print settings so I didn't want to try multicolor printing. I separated the plates to have a design and a base plate. I haven't printed these because I'm waiting on filament so idk the adhesion…
Separated version for ease of printing
I cut the garnish to print it separately.
I made this because I got a request to do so. please comment and like!
Introduction This version has the sail and mast separated into two parts. This allows standard printers to get the sail and mast to be different colors. I also found it interesting to print the sail in TPU. See the original model for more…
I separated the original file into two pieces so that it fit onto my Ender 3v2
