Wyniki wyszukiwania: sg108

Sortowanie

Liczymy pasujące modele…

10" Rack mount for TP-Link TL-SG108PE Switch

This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…

Pobrania
1859
Polubienia
194
Ocena
4,78
P

TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…

Pobrania
1447
Polubienia
108
Ocena
5
P
Printablesowlish

TP-Link TL-SG108/SG608E 10-inch Rack Mount

This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…

Pobrania
1093
Polubienia
102
Ocena
5
P
PrintablesCeleste

Celeste's 10" rackmount panel V.1 for TL-SG108

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…

Pobrania
773
Polubienia
114
Ocena
5
P
PrintablesM. H.

TP-Link TL-SG108 8port switch mounting bracket

Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.

Pobrania
680
Polubienia
68
Ocena
4,7
P
PrintablesKIL0

TP-Link TL-SG108 mount

Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

Pobrania
524
Polubienia
36
Ocena
4
P
Printablesnerdybrew

10" Rack mount for TP-Link TL-SG108PE Switch no front logo

just removed the front logo because I could not get it to print cleanly.

Pobrania
437
Polubienia
35
Ocena
5
P
PrintablesDiew

10 inch rack TP-Link ER605 - SG108

How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…

Pobrania
416
Polubienia
53
Ocena
5
P

TP-Link TL-SG108(PE) | SF1006P 19-inch Rack Mount

A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…

Pobrania
413
Polubienia
42
Ocena
5
P
Printablesandyshinn

TP-Link TP-SG108 Switch Mounting Bracket

A bracket to mount the TP-Link TP-SG108 switch under a table or desk. Use 4 x #8 wood screws. Switch is held into place using bumps on the bracket that fit into the existing switch mounting slots.

Pobrania
403
Polubienia
64
Ocena
5
P
PrintablesCeleste

Celeste's sturdy 10" rackmount panel V.2 for TL-SG108 and TL-ER605

Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…

Pobrania
351
Polubienia
21
Ocena
5
P

TP-Link TL-SG108S-M2 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…

Pobrania
315
Polubienia
40
Ocena
5
P
Printablesn3bulus

Rack mount for Omada router ER605 & TL-SG108PE

Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…

Pobrania
303
Polubienia
22
Ocena
5
P
PrintablesCaptainAl

1U TP-Link SG108 (all variants, E or PE) 10" rack mount

There are other suitable designs for TP-Link SG108, but I didn't like them; I designed one in which you can easily slide the switch inside the rackmount. The hooks in the middle tightly fit with the body of the device, and it keeps it in…

Pobrania
297
Polubienia
41
Ocena
0
P
PrintablesReini

TL-SG108E DIN Rail (Hutschienen) Mount (FreeCAD)

The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…

Pobrania
285
Polubienia
19
Ocena
5
P
Printables<Charlie_root>
Pobrania
281
Polubienia
19
Ocena
5
P
Printablesbryanpryor

Bracket for TP-Link TL-SG108 Network Switch

Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.

Pobrania
267
Polubienia
37
Ocena
5
P
PrintablesThoreB

10" Switch Rack Mount (TL-SG108PE)

10" Rack Mount Solution (1U) for a TP-Link TL-SG108PE Switch. You can use double-sided tape to secure the power brick in place and zip ties to manage the power cord. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x…

Pobrania
264
Polubienia
31
Ocena
4,67
P
Printables7FM

TP-Link TL-SG108 Switch Mount

This is a remix of https://www.thingiverse.com/thing:3089825 with the following improvement: improve lan clip accessibility by changing the switch mount position reduce the mount width from 12 to 10mm slightly adjusted dimensions for a…

Pobrania
182
Polubienia
13
Ocena
5
P
PrintablesKevinC3

TL-SG108-M2 Switch Mount for 10" Rack

Designed this to mount the TP-Link TL-SG108-M2 in a 10-inch rack. The switch doesn’t fit through the front opening but fits inside, so I made this custom shelf to hold it securely. Printed with - PETG If this print helped you out,…

Pobrania
171
Polubienia
8
Ocena
0
P
Printablesmtominsk

TP-Link TL-SG108 holder for Ikea Skadis Voronoi Style

I had some fun do design this one. This might be the reason why it looks a little “fussy” :) I love the voronoi style, not just because of the optics but also to save material at printing. Donations are welcome and helping to keep my work…

Pobrania
152
Polubienia
19
Ocena
4
P
PrintablesPeter Martin

TP LINK SG108 Gigabit Switch Wall Mount

TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.

Pobrania
142
Polubienia
9
Ocena
5
P
PrintablesTRIMAGIA

tp-link TL-SG108E 10-inch rack mount

3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.

Pobrania
137
Polubienia
31
Ocena
0
P
PrintablesR2D2D2

TP-Link 8-Port Desktop Switch Mount (TL-SG108)

I wanted to mount my TL-SG108 Desktop switch under my desk to use the space better but the mounting channels are meant for walls. i designed these brackets to be as unobtrusive as possible and hold the switch securly upside down.

Pobrania
117
Polubienia
12
Ocena
5
P
PrintablesFinkerton

TL-SG108 Rackmount Pin_Clips

To secure the switch, insert into the rack mount, Then insert the small side into the switch slot and slide the large side (with the flat side toward the back of the switch) onto the raised area on the mount to lock it into place.

Pobrania
117
Polubienia
10
Ocena
5

TP-Link 1 Gig Switch 8 port Model number: TL-SG108E

A simple mini rack slot in for TL-SG108E TP Link switch

Pobrania
117
Polubienia
7
Ocena
5
P
Printablesmaggoh

TP-Link TL-SG108 Network Switch mount compatible for ikea pax (32mm grid)

TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)

Pobrania
113
Polubienia
25
Ocena
0
P
PrintablesUwUTastisch

10inch Rackmount, TP-Link LS108G, TL-SG108 and 2 Keystones, FreeCAD

I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…

Pobrania
111
Polubienia
18
Ocena
5
P
Printablesklein_walke

Lab Rax - 10" - 1U - TP-Link_TL-SG108E

---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…

Pobrania
102
Polubienia
24
Ocena
4
P
PrintablesJesse Schauer

TP-Link TL-SG108E Mount for Leviton Structured Media Center

A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…

Pobrania
99
Polubienia
10
Ocena
0
P
PrintablesBrandon

TP Link SG108E Desk Stand

Small switch stand designed to work with TPLink SG108E, 8-port switch, but should work with any switch that is 158mm wide which I believe a lot of 5 and 8 port switches are; just double check yours. The bottom cable ties allow for your…

Pobrania
98
Polubienia
22
Ocena
4
P
PrintablesLerry

TP-Link TL-SG108 Rack Mount

This is a 1U mount for the TP-Link TL-SG108 8 port switch, but I suppose it will hold anything that fits this opening. Dimensions ( W x D x H ) 6.2 × 4.0 × 1.0 in (158 × 101 × 25 mm) The idea is the pins hold the wings in place as well as…

Pobrania
95
Polubienia
5
Ocena
0
P
PrintablesJonas Wallen

Tp-link SG108-Mount remix

A remix of an already good model. Changes. 1. Adjusted the height on the inside as my switch was 25.8mm high. 2. Added radius on the ventilation slots on the side to reduce the bridge when printing it standing on the front. 3. Added…

Pobrania
88
Polubienia
6
Ocena
0

1U TP-Link SG108 v2, 10" rack mount

Adaptation of the original print for a TP-Link SG108PE v2

Pobrania
87
Polubienia
13
Ocena
4
P
PrintablesMixmeister

TP-Link SG108 - 19 inch Rackmount modular

Remixed this to make it fit a 19" Rack, adapted mount from @Mauker you can use the mounts side by side, ore use some of @Mauker's modular Parts 3x M5 screws 3x M5 hex nuts. Thx LikeAZanda @Mauker

Pobrania
87
Polubienia
15
Ocena
5
P
PrintablesEunoseer

tp-link TL-SG108-M2 switch bracket

I recently purchased a tp-link multigig switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket is split into to halves to be…

Pobrania
86
Polubienia
3
Ocena
1
P
PrintablesPandalism

10in Mini Rack Adapter for TP-Link TL-SG108S

Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…

Pobrania
80
Polubienia
14
Ocena
0
P
Printablesyahbluez

TL-SG108E under shelf mount TP-LINK

collection https://www.printables.com/@yahbluez/collections/518691 Needed an under shelf mount for this small switch… …used FreeCAD to make one. (Feel free to use the included CAD file to make and sell your own. licence: GPL v3) Picture…

Pobrania
79
Polubienia
5
Ocena
0
P
PrintablesTFro3

Wall Mount/Shelf for Mini server rack - TP Link TL-SG108 and Raspberry Pi

This is just a simple wall mount/shelf for the Mini server rack for TP Link TL-SG108 and Raspberry Pi model to sit on. That model can be found here . I printed with 25% infill in PLA and seems to be plenty sturdy. I made it more on the…

Pobrania
77
Polubienia
31
Ocena
0
P
Printablesdimas_art

TP-LINK TL-SG108E Holder

A custom-designed wall or desk mount holder for the TP-LINK TL-SG108E 8-Port Gigabit Switch. This holder securely fits the device, ensuring stable placement and easy access to ports and LEDs. Ideal for organizing your networking setup at…

Pobrania
75
Polubienia
2
Ocena
0
P
Printablesbartkodden

Double patch cabinet (TL-SG108)

This model is used to combine a TP link switch with a part of this (amazon) or this (aliexpress) 24 port patch panel. After receiving the patch panel I noticed it consisted of three 8 port parts. I already had the TP link switches and…

Pobrania
75
Polubienia
19
Ocena
0
P
PrintablesVeco

Modular 10" inch server rack - TL-SG108 mounting panel

1U Mounting panel for a TP-Link TL-SG108 to match the Modular 10" inch server rack project

Pobrania
73
Polubienia
11
Ocena
0
P
Printablesjaav

tp-link TL-SG108S Network Switch SKADIS Holder

A simple way to attach your tp-link TL-SG108S Switch to the IKEA SKADIS peg board. Based on cloudybasements design.

Pobrania
72
Polubienia
5
Ocena
0
P
PrintablesTerenceMK

Modular 1U Relay Rack Mount for TP-Link TL-SG108 + Rasberry Pi + AN5506-01-A1.

Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…

Pobrania
62
Polubienia
14
Ocena
0
P
PrintablesReason32

Network Switch DIN Adapter (TP-Link SG108PE)

I made this to be able to mount my switch upside down to save space. It snaps on from the side and is then held by the rubber feet and friction. If you remove the rubber feet from the switch it could also just slide in and hold by…

Pobrania
60
Polubienia
6
Ocena
0
P
Printablesdvittorio

ESRack - Module - TP-Link Switch TL-SG108

I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link Switch TL-SG108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…

Pobrania
58
Polubienia
12
Ocena
0

Case for TP-Link - TL-SG108PE 8-Port Gigabit Switch

This 3D printable holder is custom-designed for the TP-Link TL-SG108PE 8-Port Gigabit Desktop Switch , ensuring a perfect and secure fit. It's ideal for mounting your switch on workbenches or mobile parts , helping to optimize space and…

Pobrania
58
Polubienia
3
Ocena
5
P
Printablesmrusse

TL-SG108 / Raspberry Pi 19" Rack Mount

Print with the front down. No support needed. Connect the two pieces with 3 M5 screws and nuts.

Pobrania
56
Polubienia
8
Ocena
0
P
PrintablesDudeIsNotOkay

TL-SG108 Leviton compatible mount

Remix off TL-SG108E holder by Jesse Schauer to fit TL-SG108 mounting holes instead.

Pobrania
52
Polubienia
2
Ocena
0
P
PrintablesTFro3

Offset Patch Panels for Mini server rack - TP Link TL-SG108

This is just a simple remix of the patch panel for the Mini server rack for TP Link TL-SG108 and Raspberry Pi model to sit on. That model can be found here . I did not have slim keystones and they would not fit due to close spacing. I…

Pobrania
52
Polubienia
22
Ocena
0
P
Printablessehrbastian

ESRack Module for TP-LINK TL-SG108E

Part Description ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108. Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket…

Pobrania
51
Polubienia
7
Ocena
0
P
Printablesslayer95

tp-link TL-SG108 10-inch rack mount

Same as original you will need 3x m3 inserts Print without supports

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesZ80b

10 inch tray for TP-LINK TL-SG108E switch

Decided to re-organize my network hardware by moving (most of) it into a 10 inch rack. After printing the parts for the rack itself (check this fantastic design by McBig ( https://www.printables.com/model/427461-10-inch-server-rack ) and…

Pobrania
49
Polubienia
6
Ocena
5
P
PrintablesStlthfghtr

TP-Link TL-SG108E Multiboard Mount

Creator dimas_art has a very good looking TP-Link SG108E holder that I wanted to turn into a multiboard compatible mount. I took his model and remixed it to add two multiboard snaps. I suggest printing in the orientation shown in the…

Pobrania
41
Polubienia
5
Ocena
0
P
Printablesidcrook

10-inch rack mount for PoE switch TL-SG108PE V2 with adjacent PSU

10-inch rack mount for TP-SG108PE V2 switch https://www.tp-link.com/us/support/download/tl-sg108pe/v2/ Remixed version of " 10" Switch Rack Mount (TL-SG108PE)". That was suitable for V3 or V5 versions of this switch, but I have a V2…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesThr33DPrinter

Re-Upload of " Mini server rack for TP Link TL-SG108 and Raspberry Pi"

Summary A small desktop server rack that's built around the TP-Link TLSG108 network switch. Includes an 8 port RJ45 patch panel, switch panel, and a raspberry pi (~3) panel. Most dimensions were based on a standardized server rack, with…

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesPablo

10" Rack Mount 1U | TL-SG108(PE) / SF1006P

If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for TL-SG108(PE) / SF1006P This bracket is designed specifically for the TL-SG108(PE) / SF1006P switch, offering a clean and secure fit in your 10-inch…

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesLvL_Dani

SG108 GS108 modular rack mount

Tplink SG108 modular rack mount likely also fits netgear GS108 requires 1u rails, recommended to print with ASA https://www.printables.com/@LvL_Dani_470947/collections/2036642

Pobrania
30
Polubienia
10
Ocena
0
P
PrintablesJarnoSe

TP-Link TL-SG108E 10" rack mount slim with keystones

I re-mixed this to 2/3U and added keystones to the both sides

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesPavelB

2 and 3 holes 10inch - TP-Link TL-SG108 holder

You can find here 2 holes and 3 holes versions of the holder for TP-Link TL-SG108, 8port switch. I used PETG, 0.2mm with no issues. Enjoy

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesLucca Strobel

Case for TP-Link - TL-SG108PE 8

Custom protective case designed for the TP-Link switch model TL-SG108PE , an 8-port Gigabit Easy Smart Switch with 4 PoE+ (Power over Ethernet) ports. This case was engineered with the following features: Proper ventilation : multiple…

Pobrania
25
Polubienia
4
Ocena
5
P
Printablesburro_jockey

10inch rack mount for tenda SG108

Has space to plug it in, just had this switch on hand and needed a mount for it. Used double sided tape for it, but could definitely use the screw mounts. If you want to add these pm me/comment and I can upload the .step

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesEPIC_Stratton

tp-link TL-SG108S-M2 Network Switch SKADIS Holder - 110mm spaced mounting holes - also fit Omada ES206X-M2.

Remixed this to allow mounting of the TL-SG108S-M2 which has slightly different keyholes than the TL-SG108S. Per report by @michaelatkis_3131516 this appears to also fit any of the Omada switches that have 110mm spaced mounting holes. and…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesVáclav Parma

TL-SG108PE 10" rack mount

10" rack mount for tp-link TL-SG108PE and its power brick Printed with black PETG

Pobrania
23
Polubienia
6
Ocena
0
P
PrintablesSimeon Krug

Basic bracket for TP-Link TL-SG108-M2 switch

Underdesk bracket for TP-Link TL-SG1008-M2 switch. Mirror the bracket for the left side. Printed in PTEG.

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesCarol3d

TL-sg108(E) rack10inABremix

un remix de Celeste's Panneau de montage en rack robuste 10" de Celeste V.2 pour TL-ER605 (-V*) et TL-SG108 (-E) endeux/

Pobrania
16
Polubienia
4
Ocena
5
P
PrintablesCode-Sandbox

TP-LINK TL-SG108E magnetic mount

I needed a mount to attach to a steel cabinet and didn't want to drill holes. Requires: (4) 8mm x 2mm magnets [ https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html is what I had on-hand]

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesGroteGlon

TP-Link SG108PE and TP-Link SG108 Mount

I needed a mounting solution for my TP-Link SG108PE since double sided tape wasn't cutting it. There is a mount for both the switch itself and the power brick. Simply use 4mm screws and install. You can use it both on the underside of a…

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesVoronwë

Parametric Bracket (for TP-Link TL-SG108/105 M2 Network Switch or any other device.)

Improved Fusion360 file based on BryanPryor's design for a TP-link switch bracket Added: Easy recognizable parameters as favorites Fixed: bracing did not scale correctly when changing parameters

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesElias

10" Mini Rack TL-SG108 mount with hole

Used in my Home Lab video I wanted to use this model but I wanted to route the cables nicely, so I added a hole to allow the cable to be routed to the back ALL CREDIT GOES TO ORIGINAL CREATOR, THIS IS A QUICK REMIX TO ADD ONE THING!…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesValentin König

TP-Link TL-SG108 Double-Stack-Mount

Wallmount to mount two TP-Link TL-SG108 behind each other. Clamps perfectly when you apply the rubber feet to the top one of the switches.

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesThr33DPrinter

Remix of "Mini server rack for TP Link TL-SG108 and Raspberry Pi"

I remixed the model to work with my larger switch, a Raspberry Pi mount with included two keystone jacks, and a blank panel.

Pobrania
8
Polubienia
3
Ocena
0
P
Printablespt geek

Rack mount for TL-SG108PE

Rack mount for TL-SG108PE for 10'' rack

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesGGG-Merch

TP-LINK TL-SG108E openConnect underdesk holder

Remix of this model: Can now mount underdesk using openConnect

Pobrania
5
Polubienia
4
Ocena
0
P
PrintablesDeckedKnight

T-Link TL-SG108 8-port wall mount

I was tired of using double-sided tape and decided to use something more sturdy. That is why I created this rather simple design to firmly mount my TP-link switch to any surface that is screw-able. I know, I could've used the 2 hang slots…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesJonas

TL-SG108PE Rack Power Brick mount

Simple Mount for the TL-SG108PE Power Brick. Fits 10 inch rack. Use a temperature resistant material like PETG.

Pobrania
3
Polubienia
0
Ocena
0
P
Printables

10 inch rack TP-Link ER605 - SG108

How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…

P
Printables

tp-link TL-SG108S Network Switch SKADIS Holder

A simple way to attach your tp-link TL-SG108S Switch to the IKEA SKADIS peg board. Based on cloudybasements design.

P
Printables

Remix of "Mini server rack for TP Link TL-SG108 and Raspberry Pi"

I remixed the model to work with my larger switch, a Raspberry Pi mount with included two keystone jacks, and a blank panel.

P
Printables

10" Mini Rack TL-SG108 mount with hole

Used in my Home Lab video I wanted to use this model but I wanted to route the cables nicely, so I added a hole to allow the cable to be routed to the back ALL CREDIT GOES TO ORIGINAL CREATOR, THIS IS A QUICK REMIX TO ADD ONE THING!…

P
Printables

TP-Link TL-SG108 mount

Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

P
Printables

Celeste's sturdy 10" rackmount panel V.2 for TL-SG108 and TL-ER605

Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…

P
Printables

10" Mini Rack TL-SG108 mount with hole

Used in my Home Lab video I wanted to use this model but I wanted to route the cables nicely, so I added a hole to allow the cable to be routed to the back ALL CREDIT GOES TO ORIGINAL CREATOR, THIS IS A QUICK REMIX TO ADD ONE THING!…

P
Printables

Modular 1U Relay Rack Mount for TP-Link TL-SG108 or Netgear GS308 8 port switches (with STEP file)

UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…

P
Printables

Modular 1U Relay Rack Mount for TP-Link TL-SG108PE

This is a requested wing for a TP-Link SG108PE (POE) switch (I'm not sure if this is a V5, but I suspect it may be). I believe it has 98mm spacing between the screws, but I do not own this one, so cannot say for sure. Use this at your own…

P
Printables

Celeste's 10" rackmount panel V.1 for TL-SG108

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…