1773 modeli
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick and easy Visor Sharpie/Pen universal clip. Great for field workers who need to scribble quick notes occasionally, and can't get caught without a pen! Printed in Prusament PETG.
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sometimes sharpies write a little too sharp. This airbrush mod fixes that by makes sharpies able to draw nice noisy airbrushed lines. Simply attach a straw that you can get with a drink at any fast food place and blow through it. The…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
I Designed a stylish Tape roll and Sharpie marker holder. It fits perfectly inside a 77mm diameter tape roller and keeps your supplies neat and accessible. The holder has a special compartment to securely hold your Sharpie, making sure…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Wydruk około 10,70 €–13,08 € nettoWstępna wycena jednego wariantu
With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
This is an original pantograph design made to hold a traditional sharpie. The design allows the user to either double or divide the tracing in half by switching the location of the sharpie. It also includes a holder for a 40x40mm stencil.…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a add on for a basic Work Sharp sharpening system, with this add on you can use any sharpening stone from 3 1/8 inches long all the way up to 6 inch long stones. When printing these components it's important to print the Lead…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
This is Deadpool's head with holes sized for sharpies but other pens or pencils will fit fine, Was printed on anycubic mega pro, can do 5 to 10% infill, I used 0.20 layer height.
Wydruk około 19,30 €–23,59 € nettoWstępna wycena jednego wariantu
This is a remix of a model made by Kezat. I made it longer, put accurate millimeter and imperial measuring marks on it, made the tightening knob larger and reduced clearances for moving pieces for more accurate drawing. • After printing,…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Standard size ball marker. Dimples in ring allow the ball to be turned making a straight line anywhere on the ball. Printed in PETG but any will work. Slightly flexible to allow ball insertion, and slightly snug to hold ball so you don't…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
ENG Sharpen blocks of dressmaker's chalk with this sharpener. Sharp edges allow you to draw fine lines on your fabrics. It is very easy to use just move the block of chalk back and forth in the V-shaped groove at the top, until the…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder comes in 3 sizes: 10, 11 and 12mm. I do recommend to print with 0.6 nozzle & Arachne perimeter generator (for speed). One holder has room for 19 pens.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Block for Drillbit Sharpening with Adapters for different Sizes.
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Mine is one of these MAXIMUM sharpeners from Canadian Tire. There are similar sharpeners from many other brands (Grizzly, Craftex, King Canada), they probably all come out of the same Chinese factory. But Tormek is the Cadillac in this…
Wydruk około 7,42 €–9,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of a fantastic drill bit sharpener designed by werz 99 This remix model is designed to be used with Parkside dremels (Lidl tool brand). Additionally you can find here a Parkside to Dremel thread adapter.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Portal Diorama - Sharpie Holder This neat Portal Diorama not only will hold two Sharpies, but also be a nice looking print on your desk! Note that the left Sharpie needs to be inserted without the cap. Assembly: Print everything as…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This clips to your cap in a second and allows you to grab and store your sharpie in half that time when you need it. There is a slight angle on the clip to keep the sharpie somewhat out of your line of sight and prevents it from…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Safety sign that only exists to warn us about itself. Ive seen some variations of this but couldnt find any to print, so i decided to do my own, print it and hang it at work, waiting to get noticed! :P Make sure to make a colour change at…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Keychain Sharpie Cap for Fine Point Sharpies
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This model is a combination of paint shaker by Daniel Tacken and Shaft rod from Tickl . However, The original shaft does not fit with my massage gun, so I have modified by add the concave for original rubber gasket provided with massage…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
Modeled by me.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Small guide for Knifesharpening.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!!!This is not a real weapon!!! Hello, Today I have a sharp butterfly knife for you. It is a bowtie knife ideal for cutting boxes. After printing, you need to connect it with pieces of filament, see photo. The ends of the filament piece…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
I was in need of a pencil holder, but instead of downloading some nice model, I decided to spend way too much time and design my own. It looks like a giant pencil sharpener and does not sharpen your pencils at all… ;) There are two…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Print Instructions : Print upside-down (slit against the print bed) 2 walls no supports
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
This sharps container for diabetes needles contains a holder for a Tickle Flex and new needles. The hazardous waste logo is printed with a color change mid layer by setting the number of extruders to 2 and setting the extruder change…
Wydruk około 4,21 €–5,14 € nettoWstępna wycena jednego wariantu
I found Devin Montes’ sharpie blender about a year ago, and I found the idea quite interesting. The stripes that can be achieved are really fascinating and quite pretty when done well! But unfortunately, this design has a flaw. It is…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
I wanted a way to store a Sharpie (paid link) on my deep freezer to allow adding dates and details to food packaging. This model has two 1"x ½"x .125" magnets (paid link) inserted into the model during printing. I had these magnets…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 2. Supports are needed for Spade Cap (refer to image). Credits: Rock Pile ( https://www.thingiverse.com/thing:4807562 ) remixed from Malunis (…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Who hasn't got a giant novelty pencil with a dull point? Why don't the shops that sell giant novelty pencils also sell giant pencil sharpeners? Now you can sharpen your pencil and use it again! Warning. It may require giant's strength to…
Wydruk około 4,69 €–5,74 € nettoWstępna wycena jednego wariantu
EN I found this model on makerworld and changed the design to match it with Makita equipment https://makerworld.com/de/models/434992-drill-bit-sharpener#profileId-339921 You should use supports for the big Overhang in the middle and the…
Wydruk około 3,83 €–4,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So my dad has a Spyderco Tri-Angle Sharpmaker, but it only has slots for 30° and 40° sharpening angles. He wanted a 35° angle so I made him this holder for it. If someone needs a custom sharpening angle just leave a comment and I'll make…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for sharpening diamond plate. Piece of double sided tape was used to mount sharpening plate to base Material: PLA Layer high: 0,2 or lower No support needed
Wydruk około 4,72 €–5,77 € nettoWstępna wycena jednego wariantu
This is a remix of Prusa MK3 Knob. I redesigned this entirely in Fusion360 to add sharper knurling which I like that grip better.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Notice: Most of this is not my work please don't credit me for it, all I did was add a few better parts and organise them. The github has full instructions for how to install and set up. I recommend downloading the files to print from…
Wydruk około 8,49 €–10,38 € nettoWstępna wycena jednego wariantu
Two years ago I bought a 10-pack of fine-tip sharpies, and wanted a way to hold and display them. The result was this nice little sharpie holder. The make in the photos is about two years old and one of the first prints I did on my Ender…
Wydruk około 7,03 €–8,60 € nettoWstępna wycena jednego wariantu
This is an add-on for a Lansky sharpening system. It is a 2 part design handle that makes it easier to hold onto the clamp while sharpening a blade. The original was a 1 part handle which I remixed in Fusion360. It now also has…
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
I absolutely hate loose pencil sharpeners! They make a huge mess, are hard to get a great grip on, and are easy to misplace. Sometimes it's not so simple as grabbing a different sharpener either; Derwent Pastel Pencils are a unique size…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
Rolling knife sharpener box including room for two spare stones. Print out of PLA, precision is good enough to ensure snug fit of the top cover. Infill: 15% 3d cubic (you can block infill in the middle of slab on PLA to save a bit of time…
Wydruk około 3,42 €–4,19 € nettoWstępna wycena jednego wariantu
Printed in PLA. No supports needed
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
Wydruk około 5,16 €–6,31 € nettoWstępna wycena jednego wariantu
Držák je vytvořen pro ořezávátko 2,5 mm x 14 mm (d x š). Výška v přední části je 9 mm a v zadní 4 mm. The holder is made for a 2.5mm x 14mm (L x W) sharpener. The height in the front part is 9 mm and in the back 4 mm.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is a stylish pencil stand for your desk or workbench. It holds six pencils as well as the Blackwing One-Step Long Point Sharpener. You can use the sharpener without removing it from the stand. The stand will guard the points of the…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Add a little fun to your sharpies and other similarly sized pens with this little springy topper! This print in place model easily and snugly clips to the body or cap of a sharpie pen to add your choice of bouncy shape to the top. The…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Náhradní dvířka kazeťáku
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Náhrada za originalní kryt. SHARP model: GF-9292X
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
Like Staafi, I faced challenges with the costs of diamond whetstones, but I also noticed limited motion when using 150 mm whetstones.…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
no supports needed
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Replacement cover for Fiskars sharpener. For better strength of the locking latches, it is better to print the model on its side. Supports: yes It is definitely better to use PET-G, due to its flexibility.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cover will protect the studs from rusting. You will have to use raft, because the walls are thin (1 mm). The holes purpose is for removing the cover off the studs. If you have any question, feel free to ask me. :D
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick fix - I do hate sticky tape repairs. So I did a 3D scan of the remote open, drawe some lines in freecad, printed and it works for me. It is not very fancy it just works, see improvements list. I printed it with 0,4 nozzle…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Battery cover for Sharp EL-5812 calculator - the calculator was made in the 1970s and still works reliably during everyday use. Over the years, however, it has lost the battery cover and the new one has received today thanks to Prusa…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter for Spyderco Tri-Angle Sharpmaker converts the 30 degree side to 18.5 degrees. Suitable for sharpening kitchen knives.
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
EN ( FR ) en dessous The Horl holder on the “cruise 2” model does not allow small blades to be sharpened. I therefore propose this model for sharpening both narrow and wide blades. 4 modifications compared to the original holder: 1- More…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Adjustable CNC drag pen for ER20 collets. With pen or Sharpie marker sleeve. To center: insert a flat substrate into the pocket and rotate pen sleeve until contact. Requires one 12mm x 3mm spring. Spring can be found under the gas lever…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
This is my design for a single-point bench grinder diamond dresser. Additionally, I have included an adapter so the dresser can be used on an Oregon blade sharpener. The user must supply the diamond shaft and cut ½"-13 threads on the…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
CNC Sharpie holder, uses 6mm hex nut and 20mm socket head cap screw. Could be adapted to use with other pens and pencils using a bushing in clamp. I used ¼ drill rod for shank but an option could be the clevis pin shown one of images.…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
This gear was made with the help of STLGears.com I chose a spur gear with these design parameters. The circular hole is just to know where the center is. I then import the file, scaled for the proper diameter…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Supports are not needed. Tisk bez podpěr.
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
Scythe sharpeningstone quiver STEP file included Perimeters: 5 Infill: 25%, gyroid Supports: no
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
need a place to access sharpies? here you go.. on the qube 500 case.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Malý testovací model 8 bitového počítače Sharp MZ-821. 44 x 30 x 11 mm Pozor, klávesy v levé části se slévají, chyba modelu. Vytištěno z PLA, tryskou 0.4 0,10 mm FAST DETAIL Čas tisku ~ 30 minut
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it anyways. This is one of those. I bought this nice battery powered pencil sharpener at Goodwill and it didn't have a cover. It…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Add some joy to your workbench! Great for all woodchuckers (woodworkers) out there! Store your pencils, if they are dull sharpen them! Pencil sharpener-…
Wydruk około 7,76 €–9,48 € nettoWstępna wycena jednego wariantu
Store ¾” wide by 12” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Store 1” wide by 18” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Have you a need for a wall-mountable tower fan? Well now you can! I've had this idea rumbling around my head for a while
Wydruk około 2,77 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dále jsou nutné opěrné plíšky 2x. Do okénka příjde plexi o síle 2mm.
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
Replacement leg of the "Sharp R-200(IN)W" microwave.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sharpener to restore the point on jumbo crayons ≤ 15mm diameter, with 4 point styles: Fine Cone - for fine detail Standard Cone - for everyday use Blunt Point - durable and consistent line Bullet Point - great for toddler play This…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints platform down no supports required.
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Pencil sharpener holder that prevents graphite powder from spilling when the sharpener is tilted.
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Protection sleeve for a 2 sided diamond sharpening stone. The diamond Sharpening Tool: https://www.amazon.de/dp/B07WJJLFMX?th=1
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 6,5 hours Slicer settings: 0.2mm layer height, 5 perimeters for the frame and base, 6 perimeters for the hook, brim 3mm is recommended, supports on…
Wydruk około 9,01 €–11,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a blade holder for sharpening rotary cutter blades that have a 10mm shaft size. The cutter I made it for had a 60mm blade. Disclaimer!!!!!! Using this can be Dangerous!! Use at your own risk!!!!
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clamp your knife in place, fix the wet stone on the slider and just sharpen your blade. This fixture is ready to go with only 3D printed parts and therefore needs no extra hardware. You might add a couple of M3 bolts later (or similar)…
About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
Minimalist, timeless bowl in a clear and sharp design. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
Support me & Join Printables Club Assembly list of non-printed items for pencil case 2 pcs - metal axis 26( 25 )mm x 3mm 1 pcs - sharpener blade aprox. 6mm x 23mm with screw 2 pcs - M3 12 - 18mm screw If you looking for a bigger version
Useful tool for getting proper angles during knife sharpening on whetstones.
![Sharpie Compass [Large Circles]](https://media.printables.com/media/prints/254399/images/2288096_0ac1b3cb-8aec-47d3-8add-51f4f58a0adb/cc7f46bf-b32e-4a85-99bc-cff5815763a5.jpeg)
