Siku Palette Maßstab 1:32
Es handelt sich hier um ein Modell einer Europalette von SIKU im Maßstab 1:32.
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
- Pobrania
- 167
- Polubienia
- 9
- Ocena
- 0
81 modeli
Es handelt sich hier um ein Modell einer Europalette von SIKU im Maßstab 1:32.
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Verschiedene Europäische Verkehrszeichen Druckbreite: 0,4mm Druckhöhe: 0,2mm Material: PLA Drucker: Bambulab X1C Update 1.1 Neue Verkehrszeichen ---------------------------------------------- Various European traffic signs Print width…
Siku Mais-Schild für Frontdreieck Siku corn shield for front triangle 1/32 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,16 or 0,2 Infill: 20% Filament: PLA PLA you want Category: 3D Printing
update: v2 layer 0.3 or 0.25 should work better spiral .. much smaller file size :-) davon kann man nie genug haben 1:50 http://www.amazon.de/Siku-1379-Traktor-Ballenzange-Heuballen/dp/B00L7UTXFA http://www.amazon.de/dp/B00I65I96S Print…
Functional and usable chest for Siku toy tractor front hitches or even back hitches when using my front to back adaptor! The chest is designed to be printed with a 0.4mm nozzle at 0.2mm layer height. I advise to print at 100% infill with…
Siku 1311 Forklift truck (1:87 toy model) comes with one pallet. That is not enough for any kid 😉
Adaptor to use front hitch tools on the back hitch of your Siku toy tractor. This part requires support material to print properly, thus I supplied a prepared .3mf file with the required settings. I recommend to print this part at 100%…
Ich hatte nie einen Heckcontainer für Siku gesehen deshalb hatte ich von einem anderen anbauteil die Aufnahme nach gebaut und eine Wanne noch zu zusätzlich rann modelliert. Es ist für denn Maßstab 1/32. Die Seiten Wände sind 15 mm hoch.
Ich hatte eine Frontbox gefunden und sie ausgedruckt. Leider passte die Aufnahme gar nicht. Daraufhin habe ich diese mit funktionierender Aufnahme für das Frontdreieck nachgezeichnet… Die Idee mit den M3 Schrauben ist gut-die habe ich…
Print Settings Druckbreite: 0,4mm Druckhöhe: 0,2mm Material: PLA Drucker: Bambulab X1C
Masse bumper de marque john deere pour attache type siku. Largeur totale : 75 mm Epaisseur max de l'attache : +- 3 mm Je vous conseil de l'imprimer en 0.1 mm à la verticale. (comme photo sur le tracteur)
if you printed the model i would love to see your makes and comments. also pls consider liking the model if you find it useful.
The shovel will need some support at the mounting triangle, i made normal supports from 45 degrees. It is optimized to have a very robust triangle connection and for easy printing. With the mechanic at the front, you can lift the shovel…
Davon kann man nie genug haben. 1:50 http://www.siku.de/de/sortiment/sikufarmer/traktor-mit-anhaenger/traktor-mit-ballenpresse-massey-ferguson.html Category: Toy & Game Accessories
Vlek za traktory fy SIKU 1:32 plně tištěný včetně pneumatik Print instructions material PLA ne PET-G pneumatiky TPE-TPU bez podpor
Ersatzreifen für Siku Bus gedruckt auf SL1S mit Prusa Flex 80 Resin 0.025 Schichthöhe flach auf Trägerplatte ohne Grundierung oder Stützen. Teile sind nach dem ersten Trocknen noch klebrig, deshalb mit zwei Waschgängen und dreimaligem…
Siku straw bales round bales square bales / Siku Strohballen Rundballen Quaderballen 1/32 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 15% Filament: PLA PLA Yellow or Green…
Straw Bale for Siku 1628 Krone Big Pack (1:87). Size: 18x14x8mm. Print with ‘fuzzy skin’ for a realistic surface. --- Strohballen für Siku 1628 Krone Ballenpresse (1:87). Größe: 18x14x8mm. Am besten mit ‘fuzzy skin’ drucken für eine…
Siku Ersatz Heckkuplung 1/32 zusätzlich wird einm kleiner Nagel benötigt (durchmesser 2mm) der in das Loch geklebt wird und auf die passende länge abgezwickt, mit gedruckter anhängung hatte ich bisher schlechte erfahrungen gemacht Siku…
if you printed the model i would love to see your makes and comments. also pls consider liking the model if you find it useful.
When you are using some tools at the back hitch of the tractor, the tractor is not able to drive nice because of missing friction on the steering axle. With this box you can put some screws or nuts in to enable a good handling of the…
Siku Adapter für standard Anbaugeräte am Frontdreieck zusätzlich wird einm kleiner Nagel benötigt (durchmesser 2mm) der in das Loch geklebt wird und auf die passende länge abgezwickt, mit gedruckter anhängung hatte ich bisher schlechte…
A simple replacement pallet fork handlers for the SIKU New Holland tractor model. It also fits other SIKU models of the same scale. Print with 4 perimeters or 100% infill!
Hecklader für alle Siku Farmer Fahrzeuge in Maßstab 1/32 Rear loader for all Siku Farmer vehicles in 1/32 scale Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20 Filament: 0.75 PLA…
Hey there So my nephews are fully into animals and trucking. But their toy truck came with a low-loader, which they love, but it's no animal truck... So designing I went and I made a trailer that can be attached to a Siku truck. The…
Both mounting hinges broke, therefore, I made a replacement loading ramp for the shown flat bed trailer. Printing: Layer height: 0.12mm Infill: 100% Support: yes Orientation: same as STL Material: PETG Make sure that you get a good…
ein Siku Fahrsilo du musst das zwei mal drucken
I was asked by a friend to repair a broken Siku John Deere tractor in 1:32 scale. Once it was fixed, I couldn't resist making an extra accessory for it, a barrel attachment and a barrel.
Hey there So my nephews are fully into trucking. But their toy truck came with a standard box trailer, which they love, but it's just a box on wheels... So designing I went and I made a trailer that can be attached to a random toy truck…
Replacement for wheel and axis/suspension for SIKU plane 5402 Ersatzrad und Aufhängung/Achse für SIKU Verkehrsflugzeug 5402 Print settings: I recommend printing with low layer height (0,10) and 100% infill at 3 perimeters The axis needs…
Dies ist eine Silo-Walze für Siku Trecker. Sie ist ausgestattet mit einem Kantenverdichter und ein Haken zum Hochziehen.
This is a simple replacement front loader (Frontlader) for all SIKU models with a front loader like the 1544 New Holland, 1540 John Deere or the 1393 Fendt. For gluing the pieces together I used a glue from Revell but super glue should…
Wie wirkst sich der Durchmesser von Kreisel auf ihre “Laufzeit” aus? Spannende Frage? Dann drucke Dir die Kreisel aus und finde heraus, mit welchem Infill gedruckt werden muss, damit alle die gleiche Masse behalten ;-) Tipp: 0 und 100…
lépe drží při tisku z PLA holding better from PLA
Update April 2026: Stabilität verbessert und eine Variante für den Claas mit Infrarot-Steuerung hinzugefügt. Der Screenshot des Druckbetts zeigt die alte Geometrie, die empfohlene Position zum Drucken bleibt unverändert. Anhängerkupplung…
A bale of straw / hay compatible with the Siku toy. Dimensions: Diameter - 19mm Thickness - 12.1mm Printing tips 0.2mm layer height Enable fuzzy skin
A simple replacement for the business end of the Siku 1717 Linde H30 forklift. The square box slides into place and the little thread is wound around it. Then the forks are clicked into place. A drop of superglue might prevent the little…
Ersatzteile für Siku Spielzeugtraktoren Gedruckt habe ich sie in PETG
Ersatzteil für SIKU 4258 Claas Lexion
Ersatzrad / Ersatzreifen für die Siku Scheibenegge 1950 Man benötigt noch eine Schraube M3x35 und eine Sicherungsmutter M3 Spare wheel / spare tire for the Siku disc harrow 1950 You still need a screw M3x35 and a locknut M3 Print Settings…
made a small magnetic wheel weight for the siku control tractos. magnet was 8 x 2 mm (room inside stl is 9 x 3mm) You have to pause the print to insert the magnet
Mit diesem Adapter machen Sie Ihren Siku Traktor fähig, auf einem Kaffesatz - Immitat Acker echt zu pflügen!
Needed some more connectors to join Siku base board (roads, farms) together. Could not find any, so I designed my own. This was my first design, and my 11 year old son taught me the basics of Tinkercad, which he had learned early in the…
You can simply place it next to the rollers, as shown in the picture above. It serves to prevent any transported material from getting inside, so that the conveyor belt does not come to a standstill. I printed it from PLA with a height of…
Rails set made for the Siku 1011 tram of my sun, scale 1:87 (H0). Rails are ca 11,4mm apart (insides) and 10cm long. For the end parts you need to push the bar into the base. The joints are tight and need a bit of force to connect the…
This is a model for creating dual wheels for the siku control fendt 933 I used the in my neighborhood common used "molcon" type layout You have to pause the print to insert a magnet (room is 8x 4mm), and you have to change the screw of…
Hier handelt es sich um ein Frontdreieck zu Ankuppeln weiterer Geräte an einen Claas Xerion 5000 von Siku.
Rohre für Siku Fahrzeuge lang oder kurz Stehend drucken ohne Support
Ersatzfelge für einen Siku Mähdrescher. Die Felge hat die originalen Maße und der Reifen kann ummontiert werden. Die Bohrung für die Achse sollte am besten auf den passenden Durchmesser aufgebohrt werden und die Welle vor dem Montieren…
20ft container for SIKU trucks, scale 1:50 (or a RC boat ....) The container is not compatible with original SIKU containers. Design was made for minimum wall thickness (0,85 mm, for 0,4mm nozzle). Glue the top and bottom together.
Siku Dach für Pneumatikstreuer 1954 1/32 Siku roof for pneumatic spreader 1954 1/32 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,12 Infill: 25 Filament: 0,75 PLA black Category: Other
Modifikation für den Siku Deutz-Fahr Mähdrescher, für abnehmbares Schneidwerk inklusive Schneidwerksanhänger Es wird zusätzlich ein sehr guter Kleber und eine Schraube M3x45 mit Sicherungsmutter benötigt Das Schneidwerk einfach mit einer…
Siku LKW mit Absetzmulde 1695
For stacking Siku tires and connecting them to other stacks.
The hitch broke in the middle of part that extends to the axis and at the sides at the ejector pin marks. Glue alone does not last long, therefore, I made a splint to keep the parts together. Printing: Layer height: 0.2mm Infill: 100%…
Support benötigt Scheibenrahmen mit zB. Uhu Hart einkleben PLA oder PETG
Klappe für SIKU 1917 Turnierpferde Anhänger Pferdeanhänger PLA oder PETG kein Support
a fork was needed so i printed one. just print, click together and add a little piece of filament on each side
Ich hatte selbst das Problem, dass mein Siku Control Fendt 939 Vario zwar noch Gas gegeben hat, aber nicht mehr gefahren ist. Die Ursache war die Rutschkupplung im Getriebe. Das dort verbaute Kunststoffzahnrad scheint mit der Zeit zu…
3D-Druck-Modell: Siku LKW Bullenfänger Adapter Beschreibung: Dieser Adapter wurde speziell entwickelt, um die Bullenfänger des Siku Sets 6714 (Tieflader Zubehörset) an den neueren Volvo LKWs (Set 6731) zu befestigen. Während die…
simple snow plough attachmentfor SIKU tractors 1:87
Vytisteno z pla na zkousku ale asi to teplotne nevydrzi ,jde velmi tezko nasadit pri nasazovani mi praskla takze model berte spise jako zkusebni nez hotovy model.
My sons trash transporter back lid was lost, so I made a very simple replacement part. Maybe the attachement parts needed to be shortened, if your car is newer. Used as a test print also for Aurapol PLA Brown, with Abaflex PLA the quality…
Funnel to direct air to ceiling instead of floor. For pipe 158mm diameter 3mm wall thickness. Mount without screws, but has screwholes if needed. Max 25 mm overhang for the pipe for installation.
Siku Achs/Rad Reparatur für Anhänger Es wird noch eine Achse aus Metall mit dem Durchmesser 1-1,5 mm benötigt. Die Druckteile mit Kleber auf die Achse pressen.
Siku Rad Ersatz für LKW10 Der Reifen kann aufgeklappt (Filmscharnier angedruckt) auf die Achse geschoben werden und dann zusammen geklebt werden (zB Uhu Hart oder Sekundenkleber) PLA oder PETG Layer: 0,2mm kein Support
Klappe und Deckel für Anhänger Siku 2929 Unimog mit Böschungsmäher PETG oder PLA kein Support
This replacement part is split into two parts to make the print easier. Two pieces of 1.75 mm filament and 5-8 mm length can be used as pegs to make the bond stronger. It is an easy print and I guess print settings do not really matter…
Rails set made for the Siku 1011 tram of my sun, scale 1:87 (H0). Rails are ca 11,4mm apart (insides) and 10cm long. For the end parts you need to push the bar into the base. The joints are tight and need a bit of force to connect the…
a fork was needed so i printed one. just print, click together and add a little piece of filament on each side
Vytisteno z pla na zkousku ale asi to teplotne nevydrzi ,jde velmi tezko nasadit pri nasazovani mi praskla takze model berte spise jako zkusebni nez hotovy model.