Liczymy pasujące modele…
Universal Tool Handle for Countersinks and Other Tools – Ø4 to Ø16 mm A precise and ergonomic tool handle for countersinks and other tools is essential for clean and controlled manual work. Whether countersinking screws, deburring,…
A remix of "sinkside sponge dish (vase mode)" by user Catdad Workshop with a more pronounced water fall added. All user credits Catdad Workshop. Your channel: https://www.printables.com/es/social/221908-catdad-workshop/about Your original…
After my first and second toolholder collection, here is the third one. This one contains storage for drills, taps, dies, and countersink bits . All trays have a height of 3 units and are not stackable . (You may put them on top, but not…
This is a parameterized sponge holder that hangs on the center separator of your sink and can hold two sponges. If you want it single sided, there are two other versions: Right Sponge Holder Left Sponge Holder It's parameterized so I…
This is a parameterized sponge holder that hangs on the center separator of your sink and holds a sponge to left. If you need to the right or double I also produced those: Double Sponge Holder Right Sponge Holder It's parameterized so I…
This is a parameterized sponge holder that hangs on the center separator of your sink and holds a sponge to right. If you need to the left or double I also produced those: Double Sponge Holder Left Sponge Holder It's parameterized so I…
I really liked Ibot_3D's vented design, but it doesn't really create room to fit heatsinks on the rp2040 (and to a lesser degree the tmc chip). So I modified it to make room. It turned out actually pretty decent. Careful when…
Best printed in a resinprinter, or in av FFF-printer with PETG.
I had an extra small heatsink so I wanted a second cutout. I only changed the “Top”, so go to the original model to get the bottom half!
Remix of "Ikea lack support leg support bracker" by Tiko, that I recreated from scratch in Fusion360 to be parametric (editable .f3d project included). My idea was to place the Prusa Original Enclosure on an Ikea Lack table, but it…
The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…
There are two versions of the top of the case, the v1 is designed for any heat sink that will fit on the second chip. The v2 is designed for the heat sinks in this kit:…
Made this model so I can adapt a Panda Revo heatsink to my qidi plus 4. “Why?" you ask? Because I'm using the e3d high temperature hotend with an aftermarket 80w 500c heater and k type thermocouple. This should work with high temperature…
Buddy Board Casing RC2.0 - 7 July 2022 Uploaded the buddy for Prusa MINI Clones and the Original MINI Hardware. Added more rigidity to the front part. A bigger bar with 2 screws instead of 1 for better alignment too… Added an extra square…
This is designed to hold sponges, scrub pads and the like on a divided sink. Note that the space to span the divide between the sink bowls is 1 3/8 inches. It is designed to allow the sponges to drain and dry out while keeping them…
Remixed from Michaël Fortin's with added countersinks for the screw for cosmetics. Works great with these t-nuts. All bolts and nuts needed come in the “spares” bag of the Prusa Mini Kit.
I had a lot of 14mm heatsinks laying around, so I changed the NoIR Model to fit those. And because I wanted a blank front, I removed the lettering. You need 4x M3x10 screws to put together the front and the back. Thanks to @Paul_GD for…
Fully parametric design in F360. Enter plug lower and upper diameter and the height. Print with TPU at 15% infill. If you need a different size, leave a request with required dimensions in the comment section.
Sink Strainer / Filter - Sink diameter > 38mm Sink must have 38mm diameter or more. Text me if you need another size.
This is a 3mm taller remix to fit a Pi Zero 2W with heatsinks. The lids are unchanged, compatibility with other lid remixes should still be given. (Heatsink in picture is about 7.25mm tall)
I had several centers deteriorate over time. Decided to print a few replacements. Print in TPU and beware of the overhangs.
Hinweis: Eine neue Version mit verbessertem Halter wurde von mir veröffentlicht Ein hübscher Schwammhalter mit verstellbarer Halterung für rechteckige oder runde Spülbecken (D: 40 cm).Die Halterung wird duch die Öffnung im Korb gesteckt…
This dish was inspired by others here - especially the wave pattern. However, I wanted it to drain on one side towards the sink and I wanted to include a wall so that the soap didn't slip off. The dish sits flat on the surface and the bar…
The DAFT (Dual Anchor Front-Top) Mount heat sinks allow you to firmly anchor your favourite hot ends to both the front and top of of your print head. The DAFT Mount system was designed to allow very stable and rigid mounting of hot ends…
Пробовал собирать сверла по дереву в компактный узел. Цель сборки - хранить сверла в футляре отвертки. Сложности в проекте представляли собой зенкерные насадки. Gcod is made for PLA, but you can use any hard plastic. Please take a look at…
I made a lid for an organizer for wood drills with countersinks. I thought that when carrying the drill bits should not lose their sharpening, and the cover should protect them contains both a lid and a stand Gcod is made for PLA and…
A camera case for the Xiao ESP32S3 Sense but with the 2x 10x10mm Heatsinks
There are two versions – one with one side blocked off, intended to face the AGP slot on the Voodoo 3 (since any air going “down” is blocked by the slot anyway). I've also made a version with a less restrictive bottom for other…
Printable replicas of the two heatsinks as seen on the Proton Pack charging stations in “Ghostbusters: Frozen Empire”. These are based on SPREADFAST heatsinks: SPREADFAST Heatsink, 1/2 Brick DC/DC Converter, 61 x 57.9 x 17.3mm SPREADFAST…
Reimplementation of the original model but with more width to acommodate NVMEs with integrated Heatsinks.
I've decided to start experimenting with 3D printing heatsinks and have made a few quick designs to test with. I show an image here of these printed with copper-embedded filament that I have, but I plan to also try PLA and TCPoly Ice9…
This dish was inspired by others here - especially the wave pattern. However, I wanted it to drain on one side towards the sink and I wanted to include a wall so that the soap didn't slip off. The dish sits flat on the surface and the bar…
Print without supports in something you can get wet and looks nice in your kitchen :) I printed mine in Marble PLA.
Holder for the Snappy Tools Countersink bits 3/32", 7/64", 1/8" and 9/64" Printed on Prusa MK4 with Jessie PLA Red Ice from Printed Solid I am using the Input Shaper which prints at .20mm layer height. I also did a color change before…
Prints well in PLA with lots of supports in order to use Ironing on a functional top surface. There's a small flat feature on the bottom lip that is parallel to the main surface that can be used to align correctly in the slicer without…
3D model for the Xerxes Pi heatsink designed to be carved in a CNC machine out of aluminium. Can also be printed out of heat conductive TCPoly Ice9 filament for a 3D printable heatsink. GNU 3.0 License so please like, edit, and share!…
I use the xESCs in an OpenMower robotic lawn mower. This bracket is intended to prevent the heat sinks from shaking loose from the xESC board over time and potentially causing a short circuit. I use them for two month now (during summer)…
TL;DR A box to hold the Ryobi 4 piece countersink set using standard 1.75 filament as a hinge. Why: I needed some countersink bits for sizes I barely use so settled for the Ryobi set. It didn't come with a storage case so modeled this up…
RPi Zero 2 would sometimes overheat when running Klipper in summer. I solved this by adding heatsinks on the back of the PCB (attached to a piece of kapton tape). This is a remix of the cover that adds some space for the heatsink(s).
Reduced Overflow Accessory for Johnson Acero Stainless Steel Sinks In some sink models, the overflow outlet might be at the same height as the faucet. If the faucet has a very large base, it's impossible to install the overflow outlet.…
Die Stuhlbeine werden lose in den Sandschutz gestellt. Die Innenmaße des Sandschutzes betragen 5 x 2,8 cm. Ich habe den Sandschutz auf Brettchen mit 14 x 10 cm Größe mit 2 Schrauben montiert. Diese Größe ist für einen feuchten Rasenboden…
Meine Version 2 des Schwammhalters mit verstellbarer Halterung für rechteckige oder runde Spülbecken (D: 40 cm). Die Halteschraube wird durch den Haltringe gesteckt und in die Öffnung im Korb geschraubt. Wenn sie an den Abstand des…
I've made a study about this subject, this device goes between your underpants and pants and clips on with the clips, it's formed to match the curvature of the belly. My studies show that it's really comfortable to wear, and after going…
If you're using heatsinks on your PoE+ hat, the original lid by @OzRocky won't fit!
Modified Einsy base with precise cutouts for 4x little 9x9mm stepper driver heatsinks such as these . Compatible with the MK3/MK3S/Bear upgrade. The grating on the back has been modified and doesn't include the cuts for the Zero like the…
I made a cover for wood drills in two versions. I thought that when carrying the drills should not lose sharpening, and the case should protect them contains both a lid in one version and a stand. If you want another option. then…
Simple stand for a set of countersink cutters. Easy print. No supports.
I needed a sparepart for my sink, after some tests this one worked good. The old one was totaly damaged. Could't use the original one so i needed the tests…
Remix of top_0.stl from OP in accommodate three heatsinks. I used TinkerCad, I'm including the OBJ zip file if you want to resize anything to fit your particular needs. Mine fits a Banana Pi M2 Zero.
Rack for Magnum 5 piece counter sink set.
The cover combines aspects of other covers and includes these improvements: cutout for wifi heatsink cutout for main heatsink cutouts for both microUSB ports cutout for microHDMI port 2 additional cooling slits 4 nubs to better secure RPi…
A strainer you size to your own drain. - Basket: drops into the drain opening and rests on the rim with a sloped flange. Holes in the floor and slots in the side let water through, and a centre post lets you lift it out to empty it. -…
Super simple stand for a set of countersinks. Sized to fit the shanks with 6, 8, 10 and 12 MM. Easy print. No supports.
A lift arm for the drain plugs that are found in Franke kitchen sinks. It is attached to an actuator shaft via a square coupling. It was designed in an amateur way in Blender from the original part. And then exported to Wavefront and STL…
The box consists of several models. You need to glue 4 feet onto the bottom of the box. You also need to attach the top section, which ensures compatibility with the Parkside storage system. Labels for the drill bit diameters are included…
The knob on my Sinkshroom strainer broke from being compressed too many times, so I redesigned it for TPU 3d printing. Just print it solid to avoid retaining water.
The organizer is held in place using a magnetic holder mounted on the outside of the tray. This allows the organizer to be easily removed and reattached as needed. The magnetic holder requires two 10×10×10 mm neodymium magnets, and the…
It's a simple holder for a standard soap dispenser pump. The soap bottle can be placed under the sink with a tube leading to the pump through the holder. It is a nut and threaded (hollow) bolt. The pump is held in place by mild friction.
An open box to store cross-hole countersinks (zero-flute countersinks) from Parkside. The original steel box of these countersinks can be somewhat unwieldy. I wanted something with no lid, so the countersinks are always easy to grab, and…
This is a remix of DYocis's excellent remix of RoscoeTheDog's Nema 17 Heatsink and Fan Adapter Mount for 40mm heatsinks. I printed mine in LDO Blue ABS using the standard Voron recommended print settings: Layer height: 0.2mm Extrusion…
3D model for the Xerxes Pi heatsink designed to be carved in a CNC machine out of aluminium. Can also be printed out of heat conductive TCPoly Ice9 filament for a 3D printable heatsink. GNU 3.0 License so please like, edit, and share!…
The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…
It's a simple holder for a standard soap dispenser pump. The soap bottle can be placed under the sink with a tube leading to the pump through the holder. It is a nut and threaded (hollow) bolt. The pump is held in place by mild friction.
I needed a sparepart for my sink, after some tests this one worked good. The old one was totaly damaged. Could't use the original one so i needed the tests…
Remix of "Ikea lack support leg support bracker" by Tiko, that I recreated from scratch in Fusion360 to be parametric (editable .f3d project included). My idea was to place the Prusa Original Enclosure on an Ikea Lack table, but it…
![[Improved] Flipped RPi Zero 2W Case and Cover with extra cutouts for heatsinks, HDMI, USB, and hex wrench access](https://media.printables.com/media/prints/2aa7b1f9-38b7-4336-a825-b126347809e7/images/11782945_c563df18-f079-4b52-ad8b-25b5231365b6_2d9e065d-38ee-4fe3-a68b-d98b2d83e589/img_20260120_004754721.jpg)
