Wyniki wyszukiwania: slinger

Sortowanie

169 modeli

P
PrintablesLinkDesigns

Finger Slinger - Print In Place Spinning Fidget

Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…

Pobrania
16 864
Polubienia
2963
Ocena
4,72
P
PrintablesCristobal5050

Finger Slinger 2.0 with Bearing Joint

!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…

Pobrania
93
Polubienia
10
Ocena
5
P
PrintablesLes

Toy model of a cantilever bed slinger

Toy model of a cantilever bed slinger with movable parts

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesCardSlinger

Card Slinger 3.0 - for MTG / ManaBox App - For Sleeved and Unsleeved Cards - Easily scan in bulk quantities of cards by hand

Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…

Pobrania
62 847
Polubienia
4812
Ocena
4,66

Kobold Rock Slinger

32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter

Pobrania
899
Polubienia
112
Ocena
4,67
P
PrintablesMZ4250

Gunslinger Collection 3

My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…

Pobrania
877
Polubienia
144
Ocena
5
P
PrintablesMZ4250

Gunslinger Collection

Assorted Gunslingers for your TTRPG needs

Pobrania
861
Polubienia
104
Ocena
5
P
PrintablesMZ4250

Gunslinger Collection

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Pobrania
838
Polubienia
144
Ocena
0
P
PrintablesBrite Minis

Goblin slinger 28mm (No supports needed)

Small goblin with a sling. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other bald…

Pobrania
808
Polubienia
74
Ocena
5
P
PrintablesSchimi

TCG Card Scanner - Alternative for Card Slinger

Stand um für bspw. ManaBox o.ä. die MTG oder Pokemon TCG Karten einzuscannen. Druckbar ohne Support in 5 Stunden. Zusätzlich benötigt: 8x M3 Schraube mit 10 mm Länge inkl. Mutter Front wurde für den Cutout des Deckels angepasst. -----…

Pobrania
720
Polubienia
91
Ocena
4,4
P
PrintablesCristobal5050

Finger Slinger 2.7 with New and Improved Bearing Joint

After continuing my 3D modeling learning journey, I've finally made some of the additional functional and aesthetic changes I planned! No longer do you need to perform mid-print steps! No longer do you need to worry about tolerances or…

Pobrania
490
Polubienia
65
Ocena
4,8
P
PrintablesDrakorex

Phone stand add-on for Card Slinger 1.0

This is an add-on for this model by IanO https://www.printables.com/model/1034404-card-slinger-10-for-mtg-manabox-easily-scan-in-bul I printed it at .32mm layer height in PLA.

Pobrania
439
Polubienia
34
Ocena
5
P
PrintablesPotatoDesigns

Triple finger slinger - print in place fidget toy

print the weight at 100% infill. The sling itself can be printed at 15-20% infill.

Pobrania
438
Polubienia
61
Ocena
5
P
PrintablesCodeMinion

Slinger - Monster Hunter World

Monster Hunter World slinger. The straps are on the large side at the moment until I figure out what armor to make and can shorten them properly. Because many of the armors also change the slinger arms they are designed to be…

Pobrania
396
Polubienia
110
Ocena
0
P
PrintablesHerrWu

BTT ADXL345 / S2DW Bedslinger Mount

A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed…

Pobrania
379
Polubienia
34
Ocena
5
P
Printablessquirrelf3d

ADXL345 (generic type) - Y axis helper ( for moving bed type printer aka bedslingers & klipper )

For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…

Pobrania
373
Polubienia
51
Ocena
4,86
P
PrintablesPey3D

SCS Small Card Slinger

Hi, this is my take on the Card Slinger 1.0 and the Card Slinger 1.0 Phone Stand Add-On combined. Its smaller cause I dreaded the long printing time. While moddeling I thought about that people, me included, might prefer a version without…

Pobrania
348
Polubienia
23
Ocena
5
P

Modified card slinger

Two pieces, I used a headband to keep them together Update 10/27/24: Removed the bottom so you can just lift it up without the cards Made the base 33% taller to add room for more cards and increase the slide slant Thicken the stand legs…

Pobrania
235
Polubienia
17
Ocena
0
P
PrintablesModel Magic

Westworld - The Gunslinger - 1973

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
190
Polubienia
26
Ocena
5
P
PrintablesEdwinD

Thri-kreen Gunslinger

This is my Thri-kreen Gunslinger. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . If you like it and/or would like to…

Pobrania
173
Polubienia
12
Ocena
0
P
PrintablesTimberlineFPV

Supportable Finger Slinger

It's literally just the normal one with the hinge spun so you can support it.

Pobrania
173
Polubienia
14
Ocena
5

Web slinger moveable figure

Firstly apologies I don't have a complete photo of the figure. I had already handed the figures out to friends before I realised I hadn't taken a completed photo. This is the seventh themed version of my original moveable figure . The…

Pobrania
172
Polubienia
85
Ocena
5

Female Gunslinger Figurine

Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Pobrania
170
Polubienia
25
Ocena
0
P
PrintablesKAD Designs

KAD Air Slinger - Ender 3 fan duct (a better version of the Vortex)

If you would like a kit made that you could buy with all the parts preassembled with instructions comment on this model or use the messaging service in Printables Note: Still work in progress as of this date. If you want different magnet…

Pobrania
167
Polubienia
22
Ocena
0
P
PrintablesPaul Howie

Card Slinger 1.0 Phone Stand Add-On

I'd recommend printing with 2 perimeters, flat on the bed as in the STL and with minimal infill, just enough to give a little internal rigidity. I used grid at 5%.

Pobrania
166
Polubienia
20
Ocena
0
P
PrintablesStarForge

28mm Cowboy Gunslinger With Revolver and Hat Western Figure StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Pobrania
165
Polubienia
17
Ocena
0
P
Printablesspengineer

USB-C Light Box for Card Slinger 3.0

Meant to fit a Card Slinger 3.0 , that has been printed in clear/transparent filament. Use with an adhesive led light strip , and either a snap-in USB-c port that provides 5v , or a USB PD trigger board (like this , this , or this ) of…

Pobrania
154
Polubienia
27
Ocena
5
P
PrintablesKarma Art

Cowgirl Gun Slinger

Cowgirl Gun Slinger for your TTRPG

Pobrania
146
Polubienia
17
Ocena
5
P
PrintablesPaul Trautner

Custom Bed Slinger

For this project I started with a ender 3 V2 and reused the 40X40 and 40X20 extrusions. I ordered 3 20X20 extrusions from Misumi to stretch the width of the printer to fit the prusa heated bed. The Y axis is on 2 linear rails to give more…

Pobrania
144
Polubienia
30
Ocena
0
P
PrintablesJosé Pedro

Anime Maid Gunslinger Figurine 3D Printable

Unleash the perfect blend of kawaii charm and fierce attitude with this stunning 3D printable anime figurine STL model! This captivating maid-dressed gunslinger kneels in a dramatic pose, wielding her weapon with deadly grace - every…

Pobrania
132
Polubienia
16
Ocena
0
P
PrintablesSebastian

slightly smaller Insert for unsleved Cards for the Card Slinger 3.0 - for Magic the Gathering (MTG)

this is a REMIX and NOT my own design. Original here: https://www.printables.com/model/1034404-card-slinger-30-for-mtg-manabox-app-for-sleeved-an the original is not allowed to be modified nor to be sold - so ni respect to the original…

Pobrania
130
Polubienia
13
Ocena
5
P
PrintablesModel Magic

Westworld - Gunslinger Face Off - 1973

Westworld - Gunslinger (Yul Brynner) Face Off - 1973 3D printable model.

Pobrania
124
Polubienia
19
Ocena
0
P
PrintablesPey3D

SSCS (Small Sleeved Card Slinger)

Small cards slinger for sleeved cards. Its the SCS I made but because the license of the cardslinger I got inspired by got changed I have to do a remix of my remix. Be aware it will say “Gianni” on the inside cause I made it for a friend…

Pobrania
120
Polubienia
8
Ocena
0
P
PrintablesStarForge

28mm Cowboy Gunslinger With Revolver and Hat Western Figure StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Pobrania
119
Polubienia
14
Ocena
0
P
PrintablesEdwinD

Mindflayer Gunslinger

This is my Mindflayer Gunslinger . This model was made for a fellow Patron of MZ4250 ( Thingiverse , Printables ) who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 (…

Pobrania
119
Polubienia
16
Ocena
0
P
PrintablesXMX.PL
Pobrania
116
Polubienia
19
Ocena
0
P
PrintablesDzyn3D

Finger slinger remix - reduce chances of curling and sharp edges

Saw the original, liked it and printed it for my son cos this is right up his street. The thinner “front” edge on the big hole started peeling a bit off bed though, so it got a bit messy and needed some sanding and tidying to get rid of…

Pobrania
113
Polubienia
8
Ocena
5
P
PrintablesPhobos

Shadows of Brimstone Gunslinger Six Shooter Template and Storage

I wanted a 6 shooter with storage for all the tokens and no accidental slipping of those. Assembled without glue. Print Settings Printer Brand: Prusa Printer: I3 MK3 Rafts: No Supports: No Layer: 0.15 Infill: 15 Filament: Fiberlogy PLA

Pobrania
99
Polubienia
8
Ocena
0
P
PrintablesESVEE Creations

The Undead Gunslinger

20cm bust of some Zombie gunslinger. I didnt get to ask his name.

Pobrania
93
Polubienia
25
Ocena
0
P
PrintablesAdam L

Finger Slinger 2.6 with Bearing Joint

Changelog: 7/28/23 : Whoopsies! Discovered glitches.. pulled model parts and advised people to wait 7/29/23 : Updated version to 2.6, because the previous “2.5” I made was badly borked :) Fixed several kinks in the models and improved…

Pobrania
87
Polubienia
19
Ocena
5
P
PrintablesFMM

Avariel Gunslinger – D&D Miniature

Fan-made fantasy miniature inspired by an Avariel (winged elf) Gunslinger for Dungeons & Dragons campaigns. Designed for 28–32 mm scale, it works perfectly as either a player character or NPC. The model showcases detailed wings and…

Pobrania
83
Polubienia
12
Ocena
0
P
PrintablesDed Makar

Desert Gunslinger

If you downloaded the model, it means you are interested in it. Don't forget to like it, please!

Pobrania
78
Polubienia
4
Ocena
0
P
PrintablesDed Makar
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
77
Polubienia
21
Ocena
5
P
PrintablesCrooked Cat

Mechanical style Finger Slinger fidget toy (customizable sign)

Designing: This is a complete rebuild of the Finger Slinger, I gave my new model a more special look but the play remains basically the same, and the grip has been improved. You can also customize your own magnetic signage,or use the The…

Pobrania
76
Polubienia
27
Ocena
0
P
PrintablesGuy_montag

Classical Antiquity - Barbarian Slingers

Classical Antiquity - Barbarian Slingers for 1:72 wargaming Made with Desktop hero 2.0 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 mm Filament: Creality PLA Category: Games

Pobrania
75
Polubienia
10
Ocena
0
P
PrintablesGeeksworth98

Kenku Gunslinger

Kenku gunslinger I made! I included blender files, including one with a skeleton. Fair warning, it is a little bit janky, so my apologies if it doesn't work for you. The wood base was the one that I opted for due to how I'm probably going…

Pobrania
65
Polubienia
7
Ocena
0
P
Printablesiluzion

bearing caps for fidget slinger

I was missing out on the cool printed weights and i didnt want to give up the feeling of a heavy bearing, so i created some caps that fit perfectly on the 608 bearing. I made 5 different versions but feel free to use my design to make…

Pobrania
65
Polubienia
8
Ocena
5
P
PrintablesEdwinD

Slender Dragonborn Gunslinger

This is my Slender Dragonborn Gunslinger . This model was made for a fellow Patron of MZ4250 ( Thingiverse , Printables ) who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 (…

Pobrania
64
Polubienia
4
Ocena
0
P
PrintablesJosé Pedro

Western Slinger Cowboy Figurine 3D Printable

Step into the wild frontier with this incredibly detailed cowboy figurine that brings the spirit of the Old West straight to your 3D printer! This masterfully crafted STL model captures every weathered detail of a classic gunslinger, from…

Pobrania
62
Polubienia
4
Ocena
0
P
PrintablesNerdstache

Portable ADXL Bed Slinger Printed Mount

Needed to mount the Fysetc Portable ADXL on one of my bed slingers. Prints in under 20 minutes. Use M3x4 screws to hold in place while running your shaper calibration on Y axis.

Pobrania
60
Polubienia
1
Ocena
0
P
PrintablesMisterTechnik

Odogaron Slinger - Monster Hunter World (metric Magnets)

You can look at the model here: https://a360.co/4miPxxm Materials: To build it the intended way, you need: Screws: I'm not sure about the exact sizes anymore, but I don't think I used more than what comes with a M2, M2.5, M3 countersunk…

Pobrania
59
Polubienia
15
Ocena
0
P
PrintablesMitchelangelo

Finger Slinger Toy Slingshot

This is a fun little slingshot that goes over your finger like a ring. Use a rubber band to launch marshmallows or folded pieces of paper. The inner diameter of the ring is 0.75 (¾) inches. You may need to scale the model up or down to…

Pobrania
59
Polubienia
15
Ocena
0
P
PrintablesJosé Pedro

Outlaw Gunslinger Western Figure 3D Printable

Step into the wild frontier with this commanding gunslinger figure that brings the lawless spirit of the Old West to your 3D printer as a stunning STL model. This weathered outlaw statue captures every detail from his wide-brimmed hat to…

Pobrania
58
Polubienia
8
Ocena
0
P
PrintablesFlabig

Web slinger moveable figure - full scale body - another version

Remix of the main Web slinger moveable figure full scale body. You will still need the head of the original model and also feet and arms from the Easily customisable moveable figure. Please check the original model for further (assembly…

Pobrania
58
Polubienia
26
Ocena
0
P
PrintablesMartin Jörg

RDR2 - famous Gunslingers - Black Belle

Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck

Pobrania
57
Polubienia
8
Ocena
0
P
PrintablesCharlotteBeLike

Input Shaper Mount for ANY Bedslinger!

Works with: - ADXL345 - Fysetc Portable Input Shaper Mount Materials: - 2x m3*4mm screw - Any Rigid and sturdy filament with no flex (for accurate results) Instructions: Apply adhesive before printing, print in the desired orientation,…

Pobrania
57
Polubienia
8
Ocena
5
P

Human Gunslinger

This is my take on a Human Gunslinger. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…

Pobrania
56
Polubienia
8
Ocena
0
P
PrintablesPrintCube3D

Gunslinger Duck

A duck gunslinger with a hoddie has supports happy printing

Pobrania
54
Polubienia
23
Ocena
5
P

Warforged Gunslinger

This is my take on a Warforged Gunslinger. It may need to be resized to fit your RPG needs due to the detailed nature of my designs. I would suggest resin printing. You do attempt to print with filament. Use a smaller nozzle and slow your…

Pobrania
54
Polubienia
9
Ocena
0
P

Tabaxi Gunslinger

This is my take on a Tabaxi Gunslinger. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
54
Polubienia
2
Ocena
0
P

Tiefling Gunslinger

This is my take on a Tiefling Gunslinger. You might need to resize this model for your RPG needs.

Pobrania
52
Polubienia
3
Ocena
0
P

Drow Gunslinger

My attempt to create a Drow Gunslinger for RPGs. You may have to resize this model to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…

Pobrania
52
Polubienia
6
Ocena
0
P

Dragonborn Gunslinger

This is my take on a Dragonborn Gunslinger. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
48
Polubienia
3
Ocena
0
P

Kobold Gunslinger

This is my take on a Kobold Gunslinger. You might need to resize this model to fit your RPG needs.

Pobrania
48
Polubienia
8
Ocena
0
P
PrintablesFabled Prints

Warforged Gunslinger

Built for war. Rebuilt for the frontier. This Warforged Gunslinger combines cold mechanical precision with the unmistakable style of a hardened frontier gunfighter. Armed with a revolver and carrying a rifle across his back, the miniature…

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesGuy_montag

Late Antiquity - Barbarian Slingers

Late Antiquity - Barbarian Slingers for 1:72 wargaming Made with Desktop hero 2.0 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesSphaeroX

ADXL 345 Bed Slinger Mount

Take Care !!!! Check your probe_points positions before!!!!! On my setup this one is fine: [resonance_tester] accel_chip: adxl345 probe_points: 125, 125, 70 Print G1 Z100 Screw the ADXL345 on it (connected) CALIBRATE_SHAPER AXIS=Y…

Pobrania
46
Polubienia
2
Ocena
0
P
Printableswaterspike

Star Wars finger slinger weights

these weights are slightly large than the original so they have a very tight fit. If you want to use glue like I had to with the original, I would recommend scaling it down by 1% or 2% I have not tested it at 1% or 2% down, so good luck.…

Pobrania
45
Polubienia
10
Ocena
0
P
Printablesercintorun

Ultimate PETG Profile & Tuning Guide (PrusaSlicer / OrcaSlicer) - Ender 3, Neptune, Bambu & Bed-Slingers

🧵 PETG Print Profile — v4 After extensive testing and tuning, I’ve updated my PETG profile to v4 . The goal of this profile is simple: PETG that prints almost as seamlessly as PLA while maintaining maximum mechanical strength. This…

Pobrania
44
Polubienia
6
Ocena
0
P

Elvin Gunslinger

This is my take on an Elvin Gunslinger. You might need to resize it to suit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…

Pobrania
44
Polubienia
6
Ocena
0
P
Printablesklworx

3D SLINGER

This 3D printer test model is designed to evaluate critical aspects of printer performance, including overhangs, bridging, stringing, first-layer detail, roundness, and overall dimensional accuracy. Styled to resemble a small…

Pobrania
42
Polubienia
11
Ocena
5
P
PrintablesTovi

1kg Spool Holder for 2020 Frame i3 Bedslinger (Enders, Kobras, Neptunes)

Lay it flat to ensure the strongest print and eliminate the need for supports. I used PLA, and it worked well. However, PETG or ABS would likely perform even better. You'll need three T-nuts for 2020 extrusions, along with three M5 15mm…

Pobrania
42
Polubienia
10
Ocena
0
P

Elephantfolk Gunslinger - Miniature by MGM!

Elephantfolk Gunslinger - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 This formidable Elephantfolk Gunslinger stands defiant, dual-wielding smoking flintlocks with a bandolier of black powder ready for the next volley. A perfect blend…

Pobrania
42
Polubienia
7
Ocena
0
P
PrintablesJGFTW

miniprusa MC3 - Cartesian Bedslinger 3D Printer

DIY Project that utilizes out-of-the-shelf components and 3d prints. Fusion360 model: https://a360.co/3Ne5RhL Main Features: ~100x100x110 [mm] build volume Direct MK3s extruder remixed for MK8/HobbGoblin drive gear and filament sensor…

Pobrania
41
Polubienia
21
Ocena
0
P
PrintablesPumkinKing

Mandalorian gunslinger holster

A Holster for the Mandalorian six-shooter made by the Galactic Armor ://galacticarmory.net/products/Mandalorian

Pobrania
40
Polubienia
9
Ocena
0
P
PrintablesUbermeisters

Ink Slinger - Printing Press

Printing press made from printed parts, B52 Unistrut with 3/8" fasteners, 3/8" threaded rod and nuts, as well as M8, M5, and countersunk M4 screws, 4" polished steel conduit, standard 608 “skate” bearings, and a linear slide rod i had…

Pobrania
39
Polubienia
37
Ocena
0
P

Bugbear Gunslinger

This is my take on a Bugbear Gunslinger. You might have to resize this for your RPG needs.

Pobrania
39
Polubienia
2
Ocena
0
P

Orc Gunslinger

This is my take on an Orc Gunslinger. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesCristobal5050

Bearing Caps - Finger Slinger Compatible

For all my fellow finger-slingers out there… Can't decide between a bearing and a cool-looking printed weight...? Why not both?? Modeling: This is just a quick throw-together so that I can enjoy both one of my favorite franchises as well…

Pobrania
39
Polubienia
4
Ocena
0
P
PrintablesDrum Stash

Pearl Export and Slingerland Compatible Bass Drum Plates/Hole Covers

A bass drum masking plate set for Pearl- and Slingerland-compatible drums that use the same mount hole spacing. Modeled from a '90s Pearl Export bass drum mount. Fits: Pearl Export- and Slingerland-compatible bass drums with the same hole…

Pobrania
39
Polubienia
1
Ocena
0
P

Harengon Gunslinger

Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and reduce your print speed.

Pobrania
38
Polubienia
6
Ocena
0
P

Gnome Gunslinger

This is my take on a Gnome Gunslinger. You might need to resize it to suit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesDtroy15

KUSBA Print-On-Bed Mount for Bed-Slingers.

Dimensioned on the official model of the KUSBA V2 from the KUSBA github (user xbst) This isn't modeled line-to-line but it is a tight fit and may need some modification depending on how well your printer is calibrated. I had a great fit…

Pobrania
36
Polubienia
2
Ocena
0
P
Printables@TimPostma

Rubber band Pellet Slinger

This is a time proven design from 2017 & is still relevant it is vertical slingshot designed to shoot off pellets with rubber bands ( also known as bullets) also just a heads up warning this can be cause welts to someone if misused at…

Pobrania
35
Polubienia
4
Ocena
0
P

Duergar Gunslinger

My attempt to create a Duergar Gunslinger for RPG games. You may need to resize to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
35
Polubienia
7
Ocena
0

Elegoo Neptune 3/4/Pro/Plus/Max Z-Axis (bed slinger) Braces/Brackets

Neptune 3 & 4 Z-Axis Brace Upgrade your setup with this sleek, high-rigidity Z-Axis Brace designed to eliminate frame flex and improve print quality during high-speed printing. Engineered for maximum compatibility, this brace features a…

Pobrania
35
Polubienia
14
Ocena
5
P

Fairy Gunslinger

This is my take on a Fairy Artificer. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
34
Polubienia
5
Ocena
0
P

Dwarven Gunslinger

This is my take on a Dwarven Gunslinger. You might need to resize it to suit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…

Pobrania
34
Polubienia
4
Ocena
0
P

Firbolg Gunslinger

This is my take on a Firbolg Gunslinger. You may need to scale this model to your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesIvanovic

Chibi Gunslinger del Viejo Oeste - Diorama Cementerio

Esta es una figura en estilo chibi de un valiente (o amenazante) pistolero del salvaje oeste, con sombrero cowboy, abrigo largo, camisa roja visible, cinturón con cartuchera y revólver en mano apuntando adelante. El diorama base incluye…

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesDed Makar
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
32
Polubienia
4
Ocena
0
P

Halfling Gunslinger

This is my take on a Halfling Gunslinger. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
32
Polubienia
6
Ocena
0
P
Printablestheory

Coaster Slinger 3D Printer

In collaboration with Sparta3D, last year we had a silly idea to build a printer, based on the Micron, but with a moving bed as the toolhead. We gave it the nickname Coaster Slinger as it slings around drink coaster sized flex plates.…

Pobrania
32
Polubienia
18
Ocena
0
P
PrintablesKDUBBS

a dummy 13 mask for a gun slinger version

a dummy 13 mask for a gun slinger version

Pobrania
31
Polubienia
6
Ocena
0
P

Kenku Gunslinger

This is my take on a Kenku Gunslinger. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
31
Polubienia
3
Ocena
0
P

Goliath Gunslinger

This is my take on a Goliath Gunslinger. You may need to rescale this design to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
31
Polubienia
4
Ocena
0
P

Lizardfolk Gunslinger

This is my take on a Lizardfolk Gunslinger for RPGs. You might need to resize this model to your preferred size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…

Pobrania
31
Polubienia
5
Ocena
0
P

Tortle Gunslinger

My attempt to create a Tortle Gunslinger for RPGs. You may have to resize this model to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…

Pobrania
31
Polubienia
6
Ocena
0
P

Deep Gnome Gunslinger

My attempt to create a Deep Gnome Gunslinger for RPGs. You may have to resize this model to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print…

Pobrania
31
Polubienia
4
Ocena
0
P

Hobgoblin Gunslinger

My attempt to create a Hobgoblin Gunslinger for RPGS. You may need to resize it to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…

Pobrania
31
Polubienia
3
Ocena
0