4359 modeli
Socket sizes: *Imperial Short 500 12pt - 1/2 inch drive - 3/8" to 1" in 16th increments *Imperial Short 375 12pt - 3/8 inch drive - 1/4" to 13/16" in 16th increments *Imperial Short 375 8pt - 3/8 inch drive - 1/4" to 1/2" in 16th…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Da mir keine Steckdosenhalterung für den Amazon echo dot 4 gefallen hat, habe ich selbst eine konstruiert. (Hier in einer Busch Jäger Steckdose.) Alles bezieht sich auf die EU Version! Ich weiß NICHT ob es an die US Verison passt! Alles…
Wydruk około 9,66 €–11,80 € nettoWstępna wycena jednego wariantu
Da der echo pop nun im Angebot war, habe ich für dieses kleine Teil nun auch eine solche Halterung entworfen. Da ich so wenig wie mich in der Tiefe aufbauen wollte, habe ich den echo pop diesmal über dem Netzteil platziert. Also wenn man…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Simple yet useful. I made in PETG Infill: 20% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toolbox socket organizer for 3\8 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toolbox socket organizer for 1\4 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Universal holder for Smartphone with popsocket. Fits all standard PopSockets. There are four ways of mounting with cable ties through the special cable tie holes with a screw - diameter 3mm suggested with double sided tape with clip for…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
I wanted a plate to put Kailh Choc switches and hotswap sockets into for a small project with a Raspberry Pi, but I couldn't find anything that suited my needs. I love mechanical switches and hope to use them in many projects requiring…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 4,64 €–5,68 € nettoWstępna wycena jednego wariantu
Contains an power socket cover blank and one with a Clip for e.g. Router power supply for german power sockets. Printing with PETG recommended due to flexibility. Enthält ein Steckdosenblanko zum selbst modifizieren und eine Clipversion…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
Wydruk około 4,99 €–6,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Socket set for 1/4" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu
I customized the entry of Gloomsen (https://www.printables.com/de/model/211006) a little bit: thin out the walls, for faster printing add an edge to the cover and thicken it a little bit, to make it easier to remove the cover from the…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
The most pluck-in holes are not deep enought for easy removal of socket protectors. This one has a deep of 12mm. The part has a total height of 16mm
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
I printed the various socket organizers, and my son has this set of Pittsburgh color-coded metric deep impact ½" drive sockets he asked me if I could print him a tray. I couldn't find one already made, and did find the actual sockets…
Wydruk około 9,00 €–11,01 € nettoWstępna wycena jednego wariantu
Print without support;
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
This is intended to prevent fingers from entering a bulb socket where you didn't put a light bulb. Easily screw in/out using a coin or a screwdriver. Why you don't just put a light bulb in there is up to you, but now you can put this…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
easy to print it with PLA (see attached G-Code) some support needed used some standard wood screws and some fitting washers I would advise you to choose some smaller screws than your holes are to leave room for some tolerance offset
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
Power outlet cover to safe your kids from touching into the power outlet, easy to print, easy to place them into the power socket and also easily removable with a simple plug
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
A simple adapter to turn your optical bench mount screws into thumbscrews. No supports needed. Many print settings & filaments should work well. The photos shown were done with: PLA 0.4 mm nozzle 0.2 mm layer height 15% infill, gyroid…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Socket set for 3/8" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Tray to hold Harbor Freight SKU 67888, (67885): 3/8 In. Drive Metric (SAE) Long Reach Ball Head Hex Socket Set, 7 Pc. Has embedded magnets (20x5x2mm) to help secure the sockets. Print instructions Start printing the files Printer will…
Wydruk około 10,40 €–12,71 € nettoWstępna wycena jednego wariantu
Socket set for 3/8" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Tool/socket holder for a cardan-joint, a hex bit adapter and a expansion step tool. The tool/socket holder uses a gridfinity 1x2 bin. It's made for a cardan-joint, 1/4" to 3/8" expansion step and a 1/4" Hex bit holder. Print it with 10%…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Printed on a Bambu X carbon, 0,12 layer height, tree support and gyroid filling.
Wydruk około 4,53 €–5,53 € nettoWstępna wycena jednego wariantu
Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
Wydruk około 8,97 €–10,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Socket set for 1/2" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
My son recently bought a very low time 2019 Kawasaki Z650. When we went to do the first oil change and remove the factory installed filter it was very difficult to remove( I think it was installed dry). My cheap set of cast aluminum oil…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick Background: I purchased a 12 volt cigarette style socket from AmazonBay (?) for accessory power on my Royal Enfield Himalayan. I found a good design on thingiverse (referenced) to mount it - but I thought I could fit it a bit better…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.
Wydruk około 3,25 €–3,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
The Big Einsy case is an awesome concept. This remix addresses the issue of being able to easily access the frame fixing screws, especially after assembly. A channel against the frame has been opened up to route a +5V power cable up to a…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small adapter for (nominal) 9 mm square drive latches with handles or as a socket adapter. Key features: for 9 mm square drive latches e.g. used in transportation and various other applications on the other side both variants…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
⚠️ Disclaimer: this project is coming in contact with 220V electricity. Be careful when doing any changes to your power outlets (because you or others may die). Old Swiss sockets do truly badly when supporting a plug. This is a…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Designed to be used with my Recessed Lens Board . Print with a 0.25mm nozzle and organic supports.
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Gridfinity tray is for this 13-Piece NEIKO 10074A Metric Hex Bit Socket Set .
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
Ratchet wrench with sockets case, print in place
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
A cap to fit inside the “half” dust covers from the original model(s). Printed in PLA 0.3mm layer height and 0.6mm nozzle without supports on flat side. For a looser fit print in original size, for a tighter fit (e.g. 103% scaling in x…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
English Holder for BESTEK socket strip ( https://www.amazon.de/Mehrfachsteckdose-BESTEK-Steckdosenleiste-%C3%9Cberspannungsschutz-Schutzkontaktsteckdosen/dp/B0719XBBML) Besides the two printed parts, you need 4 screws like 3.5 x 25 with…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
this printable nozzle changing adapter eliminates the need for any tools or hardware to change the nozzles. It is designed to go with the Nozzle torque wrench from @G_design , but should work with any tool, that uses hex bits. It is…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This socket organizer is a customized version of Flo's Socket adapter holder design, modified to better suit my impact driver socket set. I had some issues opening and using their FreeCAD file, so rebuilt it in Onshape instead. If you…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
I've simply print it with the default PLA 0.2 profile for the MK3S on Prusa Slicer. Support needed. The screw hole diameter are 8mm.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Three color print for printers with MMU. Nice fidget toy.
Wydruk około 19,25 €–23,52 € nettoWstępna wycena jednego wariantu
Horizontal Lamp Designed for red light therapy lamp MITO LIGHT Bulb 3.0 ( https://www.mitolight.cz/mito-light-bulb-3-0/ ). can be used for any bulb with a 4cm socket. You can support me with Bitcoin or Lightning network HERE or normal…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
As the tile said, a holder Gridfinity tool holder for a 5 mm Zinus allen wrench. Wie der Titel schon sagt, ein einfacher Halter für eine 5 mm Inbus Knarre von Zinus.
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About IKEA Tral has a mounting between the lamp and the GU10 ceramic socket, that uses two metric screws to keep it in place - the problem is that the mounting totally shattered around the screw heads and it just fell off. So I did a new…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is necessary to extend the line from the rear LED-light 16 pin block: Black – GND (General contact) Yellow – + Turn right Green – + Turn left I used this 12v socket
Wydruk około 6,14 €–7,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I noticed a user was asking for a wall mount socket organizer. I made a small one. The socket sizes range from 4.0mm to 7.0mm. The wall mounting screws will have to be M3x0.5. It was the best size I was able to come up with considering…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
A 3/8" drive designed special socket for removing VW, Audi, SEAT, Skoda airbox studs, as a standard bi-hexagon socket does not accommodate the stud head. Printing Information. 0.20mm (QUALITY) layer height. 25% infill. 2mm shell thickness…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
I made this on Fusion in about 4 hours because I wanted switchbacks, blinkers, and running lights on my 2003 Tacoma in the upper corner by the headlight. It uses a 3157 bulb plug "90075-60060" OEM from Toyota. I used an LED 3157 bulb from…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
With layer high 0.25 --> Layer 16.45, stop for insert the Hex nut M5. I had to change all my socket T15 with a CEE socket, but the CEE is bigger than the T15. So i made this adapter. T15 (Screw hole 38x38 M3-M4) CEE (Screw hole 60x60 M5)
Wydruk około 1,97 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modeled in two parts, which slide over top of one another and lock into place to hold the processor securely within. This particular tray (I am making a series of these for the older processors in my collection) is for Intel Socket…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
Socket for import cabinet drawers.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Airfreshener EU Socket Holder Want to mount your airspray to a wall but do not want to drill holes? This gadget allows you to mount the spray in any socket for better spraying area. Fits traditional EU type E socket with a grounding pin,…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
This model is being shared in studies of nocturnal perspiration aka night sweats. This is all being done by a Q-Strip, a new phenotypic digital biomarker under validation. This model is a part of a bigger course of “nocturnal sweat" in…
Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu
A rectangular socket for felt. Size of the foot: 20 x 15. Size of the felt strip: 20 x 13.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Warning : if you are not familiar with electricity and electrical mains connections, do not play with it. The mains voltage is dangerous. On my Singer sewing machine, model 101, Bakelite jacket (P/N: 190552) to mains socket cable…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this model, inspired from an other one but I created a clip, like that no need for screws. Take off the door plug the socket where you want and put back the door. My daughter needed a socket for her activities and I hate wires!…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Een beugel om de lamp dichter tegen het plafont te hangen ter bescherming van de lamp. Zo dat je er minder snel teganaanloop met iets. De lamp zit in een socket van 38mm. Groetjes Ludo A bracket to hang the lamp closer to the ceiling to…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
There are many great models online for gridfinity socket organizers, but my toolbox is small, so I needed them to be as space-efficient as possible. This is my take on space-efficient socket organizers. I had to make some compromises on…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
If there is any other type of screw/bolt you need modeled please message me
Knurled handle for Socket Head Cap Screw with hexagon socket (Zylinderkopfschraube mit Innensechskant) Fits perfect ISO 4762 / DIN 912 Screws Good little handle for little force For M3, M4, M5, M6, M8, M10 + M2,5 Add a bit of glue to…
A stand for charging your phone while it's plugged into an outlet. It can be placed on vertical or horizontal outlets. The tray is also reversible. It has small notches on the sides to secure the charging cable if you want to leave the…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
Printed mine out of high-vis orange so I can always spot it across the garage.
Gridfinity socket organizers created for the Husky 125-piece mechanics tool set. (https://www.homedepot.com/p/Husky-144-Position-1-4-in-and-3-8-in-Drive-Mechanics-Tool-Set-125-Piece-H144125MTS/308915643) Organizers are broken up by ¼" and…
Parametric pole holder Inserted metric thread
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White
Many people downloaded my space-efficient socket holders , but some requested 1 row socket organizers as well. Here they are! This set is for 3/8" drive imperial and metric sockets - deep and shallow! If you're curious why some sizes are…
2024_05_28 Newer version of these files is located here. Old files still work fine and are still posted here. works with customizer and has more options for editing pre-entered data so only have to turn unwanted holes off. easier to turn…
Updated 17 July 2024 - Support for Multi Colour printing I was inspired by the concept of BuildBug's socket holders created in Fusion 360 https://www.thingiverse.com/thing:4696546 . But after a day messing around with Fusion 360 ( I'm not…
Lampshade compatible with Herrnhuter star size 1 Diameter of adapter Ø12,8 mm. Adapter need to be glued in place. Lampenschirm kompatibel mit dem Herrnhuter Stern Größe 1 Anschlussdurchmessers des Adapters Ø12,8 mm. Der Adapter muss…
Bunch of models I designed. Photo shows some of them in use. Not all the items in photo were designed by me, if you want any of there models reach out. If anyone wants to use these, remix them or whatever feel free to. If you need a…
Holders for the sockets, torx, allens, extensions, and adapters
This model is compatible with the lego system.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need: 6______M3x10mm socket head cap screw…
Another problem solved! I have a Crescent mechanics tool set that was purchased from Costco over 20 years ago. The cheap plastic organizer case that housed the tools self-destructed a long time ago so I transferred the entire set to a…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
Holder for Big Power strip (6 Sockets).
UPDATE: now the stand is printable too! Just print the part three times and glue together :) Also I added a shorter socket adapter that will make the moon fit better on the stand. The moon is scaled down to 86.87% to fit on Prusa MINI.…
This is a remix of my M3 screw knob design that seems to be quite popular. I have tidied up the code, made it more reliable to print, and expanded it to cover M3, M4 and M5 socket cap screws. It comes in two flavours: using either a…
This model is compatible with the lego system.
I designed these components for a Smartphone holder ( http://www.thingiverse.com/thing:1778271 ). I thought that other people might find the ball and socket assembly to be useful for one of their projects. Unfortunately, I resized it a…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
I found it simple enough to split the GoPro mount .stl this is remixed off of, and added fuzzy skin and top ironing. Including .3mf file so you can see print settings. Thanks to @The best stork for their remix of @Phillip9933's Google…
These are socket set organizers for your tool chest drawer. I made these because I was tired of the jumble of sockets I had and the difficulty of finding what I needed. These were made for craftsman sockets. I have no idea whether or not…
We made these to hold all of our sockets for our ratchet/socket wrenches. Specifically, it was this kit: https://www.amazon.com/Crescent-CTK170CMP2-Mechanics-Tool-170-Piece/dp/B00F4AVRGW?th=1 They are split up by drive size, and are…
I created this for the Tool Grid System as I needed a 3rd color and the ability to add one at a time instead of multiples. These screws from McMaster Carr are compatible, but they can likely be found for cheaper elsewhere.…
