Soprano Ocarina
Original model can be found here: https://www.thingiverse.com/thing:2846575
- Pobrania
- 2042
- Polubienia
- 195
- Ocena
- 4,57
64 modeli
Original model can be found here: https://www.thingiverse.com/thing:2846575
There are already many designs for 3D printed ukuleles. Why another one? My goal was to design and build from scratch an instrument that I could then use to write my own original song. It ended up taking a lot longer than I originally…
Body length is 240mm, so make sure your print area is large enough. The instrument is assembled from several printed parts that are glued together: body, back lid, neck, headstock, fretboard and bridge. Saddle simply slots into the…
3D Printed reed case for soprano saxophone and Bb clarinet, size can be changed to fit other instrument reeds. Max of 8 reeds can be stored in the case. Extra material: 4 small round magnets needed for locking mechanism, 2 hinge pins (ex:…
This ukulele prints in 4 pieces and glues together with superglue. Instructions All parts printed in PLA with 0.2mm layers. The body prints as a single piece with no supports (all needed supports are built into the model). The supports on…
Work in progress All the files are ready, but for now they are in one 3mf and without instructions. So take elements from this 3mf and split into several prints acording to your material, color, etc. Use instructions and hints from…
120% scaled ocarina :)
Introducing the soprano guitalele - the newest instrument in my family of 3D printed ukes . A guitalele (or guitarlele, or ukitar) is a cross between ukulele and guitar, with six strings tuned like a guitar but the small size of a…
The instruments are given as pieces. In ASA plastic they can be welded together using acetone. I have found this method to very reliably produce a functional and well sounding whistle. Instructions You have a choice of four sizes of…
Based on my previous headless gourd shape ukuleles, but instead of using off the shelf tuning pegs, I designed these 3D printable tuning pegs that is completely concealed. This design allows the unit to stand upright on its base like a…
V5.5 - This is an acoustic-electric version of my recent soprano ukulele design . It includes an under-the-saddle piezo and jack panel to electrify the uke! Update 9/26/24 - I've got a new and improved Model 3 tuner design. Check it out.…
Here is my 3D print Soprano Ukulele. The instrument is fully functional once completed. I am quite pleased with how this turned out and have thoroughly enjoyed having a homemade custom ukulele. I have constructed two of these. The orange…
The Sopranos - Tony Soprano - 1999-2007
This is a Soprano ukulele I designed to be easy to print and assemble. No glue required for easy repair. This is an upgraded version that uses a shorter 250mm steel rod. I adjusted the sound hole and bridge placement for a louder and less…
I reproduced this from Adrian Brown's Modena supra-sopranino PDF. In order to print, I suggest having each section mostly vertical - you can print up to 10deg off vertical without negatively affecting the barrel. Do note, this is a resin…
This instrument is from a measurement done by Die Zinken Und Der Serpent by Beatrix Darmstadter. The book was published by Sammlung alter Musikinstrumente – Kunsthistorisches Museum in Vienna. The initial instrument was created either the…
Hello This is a straight version of a bass serpent however in soprano size. It has been modelled in Catia. The model had been cut to be printed in smaller part. it shoud work with any standart trombone mouthpiece. I will publish an…
Introducing the all new Mini 2! The new, Mini 2, sopranino sized ukulele with a 10.2 inch scale length, significantly improving on my original Mini Pocket Ukulele . What's new in the Mini 2: Wider fretboard for better playability. New…
This is an old version. I do not recommend this version. Get the new and improved version here: https://www.printables.com/model/791862-customizable-soprano-ukulele-20 This is a Soprano ukulele I designed to be easy to print and assemble.…
Dual Ocarina stand for Soprano C and Alto C ocarina designed by E.C.3D https://www.printables.com/model/845214-ocarina-sc https://www.printables.com/model/474058-ocarina-of-time-12-hole-alto-c-ocarina I've printed many ocarinas here, but…
Introducing the Soprano 2 Ukulele! The Soprano 2 Ukulele - a new version of my soprano uke with the the same great sound, but a new way to print, allowing for full color body tops. Update 7-22-26 See my new tutorial on how to integrate…
The Sopranos - Carmela Soprano - 1999-2007
After building the huge dulcimer, I wanted to build something lighter and more compact. And here it is — soprano psalmodicon . It's bowed instrument, rooted in Scandinavian spiritual traditions. This one is a modern psalmodicon. It's much…
Creato e personalizzato per un mio amico che gestisce una ASD Volley Ho messo logicamente il modello solo con il pallone Non può mancare agli appassionati di volley ;-) *** Created and customized for a friend of mine who manages an ASD…
The Sopranos - Bobby Bacala Baccalieri - 1999-2007
The Sopranos - Paulie Walnuts Gualtieri - 1999-2007
Modello 3d di cultura componibile, per averla di diversi colori, oppure modello unico colore.
The Sopranos - Corrado Junior Soprano - 1999-2007
The Sopranos - Dr. Jennifer Melfi - 1999-2007
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable…
Imán magnetico del logo de la serie de TV The Sopranos.
The Sopranos - Christopher Moltisanti - 1999-2007
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Introducing the Micro Ukulele! The Micro : a sopranissimo sized ukulele that's only 11 inches tall with a 6.8 inch scale length. Super small and fun to play, with a surprisingly full sound! Wide fretboard for playability. Print the body…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I reproduced this sopranino recorder from https://en.natmus.dk/fileadmin/user_upload/Editor/natmus/musikmuseet/Dokumenter/sopraninoblokfloejte.pdf In order to print, I suggest having each section mostly vertical - you can print up to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I was looking and looking for a large bottle holder, and could not find one that would fit a 83mm square bottle I got at Costco. Thus I present to you this easy to print model. Printed in ABS, with .3 layer height and 2 perimeters and 15…
An example of 3D model generated with my Gugulele OnShape script… Decorative headless gourd shaped design Soprano ukulele scale length Double rectangular through-body spine Single oval off center sound hole "+|-|+" Bracing Tail-end…
Similar to all my other headless ukulele designs, but meant for folks with printers with maximum 220mm in Z-axis. I haven't printed this yet, so if you did successfully, please link your make here. This comes in 3 pieces to be glued…
Thank you Tomek for your idea to bolt bridge! I used this to modify another ukulele
Hello there. I designed a ukulele shaped like a crescent moon. The name Luna is Italian for moon. If you are interested in 3D printing one, make sure you have a set of geared tuning pegs. Please enjoy. Which version to print? I highly…
Organizer a sei scomparti intercambiabili, per poter organizzare al meglio piccola minuteria come viti e bulloni. Ogni Organizer si incastra con quello superiore. Misure base porta contenitori: 24x19x5cm Contenitori interni grandi:…
Introducing the Super Soprano Guitalele 2! The Super Soprano Guitalele 2 - an all new version of my Super Soprano Guitalele ! This new version has several improvements compared to the original: Like my recent Soprano Ukulele 2 , the body…
V3 - This is a version of my recent soprano ukulele design , that includes built in LED lighting! There are both acoustic, and acoustic-electric bodies available. The body is printed in transparent PLA for maximum effect. Update 9/26/24 -…
Not many people know what a soprano trombone is nor will they ever need a stand for it. I do though and I thought no better way to make one then to pay homage to one of the best summers I ever had with the Reading Buccaneers Drum and…
This is not just a standard print – it is the ultimate challenge for your 3D printer and a dream come true for audiophiles! This project features massive floorstanding loudspeakers, with a design heavily inspired by the legendary Focal…
Thermaltake Soprano Hdd caddy saw a need, filled a need. measured and completely re-drew it up in CAD. Hope this helps that poor soul like me that ended up with this classic case and was missing the caddies print it however you see fit.…
Ta cansado de deixar seu Soprador jogado em qualquer lugar ou de ver ele caindo o tempo todo por esbarrar nele sem querer? Pois aqui ta a solução! uma estação pra deixar ele de pé com mais charme ;D Recomendação: pode ser impresso com…
# Soprano Rebec (remix of "Alto Rebec" by alleycat) A smaller, higher-pitched remix of [Alto Rebec by alleycat]( https://www.printables.com/model/460663-alto-rebec ) (Printables, licensed GNU GPL v2.0). This remix keeps the original's…
Three 3D-printable soprano saxophone mouthpieces, designed with Open Mouthpiece, a free and open-source mouthpiece generator. Each design comes with a matching ligature and cap. The designs Flamma: round chamber, concave baffle, .062" tip…
A duck-themed top for my soprano 2 ukulele. This is just the body top. The rest of the parts and instructions on assembly can be found on my Soprano 2 page .
Introducing the all new Mini 2! The new, Mini 2, sopranino sized ukulele with a 10.2 inch scale length, significantly improving on my original Mini Pocket Ukulele . What's new in the Mini 2: Wider fretboard for better playability. New…
There are already many designs for 3D printed ukuleles. Why another one? My goal was to design and build from scratch an instrument that I could then use to write my own original song. It ended up taking a lot longer than I originally…
Silicone ring, rubber band, cork or teflon foil must be added on the tuning slide.
High E Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
High Eb Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
High C Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
Bb Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
With hole for the pinkie (D) and bottom note B to play minor tunes.
1/6 of total size taper with 1:33 and the rest of chanter with a 1:26 taper. Throat 4,7mm. Sound volume should be similar to a Borderpipes in A = 95-100 decibel. Should sound similar to this one:…
https://marktsack.de/community/index.php?attachment/2250-marktsackpfeife-2020-erg%C3%A4nzung-pdf/ 03.06.26: Model is no longer available.