Gridfinity - 1x1 - 2x Staedtler rasoplast erasor holder
Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
72 modeli
Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Staedtler's Noris Digital Jumbo Stylus has a fabulous feel, better than the EMR stylus from reMarkable , and a fraction of the price, but lacking that magnetic attachment. This model slips onto the stylus and holds a number of magnets…
I've seen some of these around for the single variant of the Staedtler sharpeners, but couldn't find a suitable one for the double… So out came the calipers! Feel free to make modifications, I'll attach the individual component STL files,…
Staedtler's Noris Digital Jumbo Stylus has a fabulous feel, better than the EMR stylus from reMarkable , and a fraction of the price, but lacking that magnetic attachment. This model slips onto the stylus and holds a number of magnets…
Added a clip to the cap so it would fit a SuperNote A6 Nomad. FreeCAD file included to adjust for yourself.
This model will protect the tips of your pencils as they're rolling around in drawers. I needed this as I am organizing with gridfinity bins and didn't want them to get all marked up with the pencils as they rolled around. The model has a…
Staedtler Whiteboard Pen Holder Description Keeps 4 of the common Staedtler whiteboard markers mounted conveniently at your whiteboard. Pens slide in with a nice auto, centering feature, that keeps the cap always at the front, so you can…
This cap hooks to supernote pen holder, and fits the Staedtler Noris Digital EMR pen. Print with support, as in the picture or .3mf file.
I thought about clicking “NSFW content”, because this pencil holder is lewd. It isn't, actually. It's a pencil holder. It holds pencils. Or, to be precise, it holds one pencil (at a time): a Mars Staedtler Micro 775 . Which rules. It also…
Holder for the 6 set of Staedtler Lumoocolor Whiteboard marker. M4x10mm thread inserts are used to fix three magnets .
To assemble, insert your Staedtler double pencil sharpener, then screw on the lid with the hole in it to retain it. After this, screw on the bottom lid to keep the shavings in. I would be careful about tightening it too hard, as…
This cap will work with all Staedtler 925-25 and 925/35 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with…
1x3 holder for 6 Staedtler Textsurfer highlighters. Was surprised when I couldn't find one anywhere for these, so I made one using gridfinitygenerator.com . Print Settings Filament: eSun ePETGLite Layer Height: 0.2mm Supports: none…
I designed this holder to have a simple and low profile magnetic holder for my whiteboard markers. It holds on to the cap, so your hands are cap-free while writing. Settings: PLA+ 0.6mm nozzle 0.6mm extrusion width 0.2mm layer height 3…
A model of the "STAEDTLER Noris digital jumbo" to use as a reference. I uploaded a STL and the Blender (4.0) project file. Credit to MiniSumo's Magnet clips , as I have used their triangular shape to get the base to extrude from!
The most space-efficient marker holder for Staedtler Whiteboard Marker. Place each marker anywhere on the whiteboard. Prints in a few minutes. Installed in a matter of seconds. Requires one neodymium magnet per pen. Size of the magnet:…
A Staedtler Noris digital jumbo stylus holder for a tablet or laptop. The styluses erasure end is held firmly by the holders clip while the styluses nib tip is protectively housed in the holders other end. With the stylus holder aligned…
I needed a cap for my Staedtler Noris digital jumbo pen, so i quickly designed one. This is a tight fit and was designed to use TPU as material. If you like to print it in an other material, maybe a scaleup by a few % is needed. It has a…
I made the cap bigger to fit the stylus. I also added holes for magnets on one side. The printed version above (and gcode) has my intials on it, but the actual print file (stl) does not include the SMS on it. I use the stylus for my…
This is a sturdy penclip for the Staedtler Norris Jumbo pen with magnets for the Onyx Boox Note Air 4 C (I will probably work for others as well) The magnets used are 6x3x1.5mm and oriented in as NS N SN polarity. I attached the magnets…
This tin can comes with no tray on it, just made 2 stackble trays you can put into the can and keep pencils organized
These i made for my kids, according to their school' requirements for materials. Soon i'll upload model without pen slots, for the smaller ones. The bottom is PETG print and is highly recommendable, the clips need to have a bit of flex in…
CAD files: https://cad.onshape.com/documents/bfcff3a1ad55f816b345489b/w/55275d27773fd80dff43bcfa/e/6e77c6173667dac5744616ff?renderMode=0&uiState=62e7499df8bb332e4a350928 Update: Cap V2 is the perfect fit on my pencil. Easy to put on and…
Replace your Triplus Fineliner cap Printed at 0.2mm layer height, 4 walls/ perimeters
The outer shape is modelled from an original HP plotter pen and the inner recess fits the triplus nicely when printed in PLA on a P1S. My design is a friction fit to the round tip of the plastic body as well as the triangular main body of…
Slide a standard Mars Staedtler block eraser in the clip and the inside nubs will grip the eraser and prevent it from falling out. The long clip slides into the spirals of a standard spiral-notebook to keep your eraser at-hand wherever…
Honeycomb storage wall holder for STAEDTLER Textsurfer Classic Highlighter. Holds 8 items. You can customize holder with Fusion 360, see file markers_holder.f3d. Держатель текстовыделителей STAEDTLER Textsurfer Classic для Honeycomb…
Replacement box for the original transparent one which tends to break quite easily. I've removed the name from the model. Hinge is printed in place with a 0.15mm clearance. Printed in PLA, standard resolution of 0.20mm works fine with a…
Print instructions 3mm brim 0.6 nozzle 0.15-0.2 layer height 2 perimeters no think wall detection PLA (due to its stiffness) You need 8 5x3x1 neodymium magnet (320g +- magnetic force). Stack them in two pairs. Magnets holding in the slots…
Adapters for standard pen holders used in vintage plotters (Roland, HP, etc.) to hold Staedtler Triplus pens. Separate files for standard 1.0 mm, 0.3 mm "fineliner"/ "superfine" (adds 1 mm clearance for longer pen) and mechanical pencil…
Filament Sharpening Adapter for a 2.0mm Staedtler mechanical pencil Although you could just use the sharpener at the cap of the pencil, this doesn't result in a sharper point and is harder to turn around than using the Staedtler 502 BK…
A pencil box shaped after my Rotring college set. The lid can be a little too firm to open you can sand the small edges a little if you want an easier grip. 3 different inserts to choose from. I might do other mechanical pencil brands…
This is a whiteboard marker holder that is intended to be mounted alongside the whiteboard with mounting tape. The model is sized for a Staedtler 6 pack of Lumocolor Whiteboard Markers and utilises the existing case they come packaged in.…
A model of the "STAEDTLER Noris digital" to use as a reference. I uploaded a STL and the Blender (4.0) project file.
there's a little notch so it sits nicely and everything.
Since my original box was completely broken and held together with a few pieces of tape, I thought it would be a good idea to make a new one. The hinges should print in place and there is virtually no post-processing required on the…
The Staedtler Mars rulers are my favourites, in fact I own every size between 15 and 50 cm! I needed a T-square for my drawing classes, and wanted something small to fit in my pencil case. This piece slides on to any Staedtler Mars Ruler…
it is an adapter for Pen holding used with the frixion-pen-holder you can find this here: https://www.printables.com/mod
Made a quick box for my daughters pass, I left 2 components out she doesn't use. The hinge is print in place with 0.2mm clearance. Which makes it a bit wobbly, but it closes good. Removed the name from the lid I printed in asa + abs (2…
I designed this cap to protect the tip from a Mars micro retractable pencil. The Cap is tested and works with 0.3, 0.5 and 0.7 mm pencils. Print Information I strongly suggest to use PETG or similar Materials. PLA does not work due to…
The Staedtler 925 is a great mechanical pencil but the permanently protruding lead sleeve makes it difficult to clip in a bag or a pocket. A couple of minutes in Fusion 360 and 9 minutes printing - problem solved! Prints fine in PLA.…
My daughter has a Stadler Pencil sharpener which needed a home on her Skadis board, so I designed this little holder for it. I printed it in pink (of course) PLA, standing on its base for strong hooks, with support for both hooks. It's a…
Keep up to 10 Staedtler Lumocolor Whiteboard Markers organized with this 3D printable holder. Perfect for easy access an
Holds a single Staedtler Lumocolor marker. 8 5x2mm magnets need to be inserted after printing.
I printed with 2 walls and 15% infill with no problems. It does not have the locking mechanism but it is a good fit so it shouldn't fall off easily. It also includes the built-in clip. It does need a tiny bit of supports for the top of…
This is a custom part for Mechanical pencil. Custom parts type1 for STAEDTLER 92515.
Case für Zirkel Staedtler
Minimalistic cap for the Staedtler Noris Digital EMR pencil/stylus. Other caps I found don't protect the tip, as the tip reaches the end of the cap. This one has a stop block that makes contact with the body, never pressing the tip. This…
Gridfinity storage for up to 6 Fimo cutter blades (one of the six slots is wider to accommodate the zig zag blade) and generic craft knife. The sides are raised so that a storage can be stacked on top or optionally a lid can be added for…
This cap will work with all Staedtler 925-77 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
The holder has 8 holes in the back in which 5x2mm magnets can be press-fit.
I use Staedtler Mars Matic technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
This was a fun little project to refine some of my ultra basic fusion 360 skills. Here you have multiple stands for the Staedtler White Board Markers and their refill jars. I made them in various forms, to fit as many as possible…
Grindfinity Staedtler Comfort holder
I own a Staedtler Single Pencil sharpener and decided to design a housing for it. Completely custom design including a threaded mechanism. The sharpener itself just presses in to the port and snaps into place. (It can be easily removed by…
The holder features cylindrical magnet slots (10mm diameter). Magnets can be inserted and easily removed, offering a secure hold. Depending on the strength of the magnets, the infill can be adjusted to make the part lighter or heavier,…
4D Gridfinity Whiteboard Marker Holder - Stack markers vertical or horizontal with one print. This is a remix of the 4D Gridfinity Marker Holder (Large) by Cullen Webb. Cullen's holder's are for Sharpie style permanent markers. This…
I designed this to hold the Staedtler Lumocolor whiteboard pens that we have for our whiteboard at work. The model is in two pieces and is screwed together using M6 screws and nuts (screws need to be a minimum of 30mm long). The pole that…
Check "detect thin wall" when in slicer. I used PLA and a 0.4mm nozzle.
Holder for this Staedtler Compass. No support, PLA, fast, small.
Overview The original paper sleeves on Staedtler Mars Plastic vinyl erasers easily rip, wrinkle, and degrade over time. This design is a robust, rigid 3D-printed replacement sheath that snugly slides over standard Mars Plastic block…
I remixed this Kitchen Tape Dispenser for Skadis (using the T-nut system) as well as adding a Staedtler Marker cap hole, that allows me to grab the pen to label the tape quickly and return it with a one handed operation.
If you slice the model yourself, don't forget to set a pause to insert the magnet. You may need to use a little more force when inserting the magnet. Otherwise, be careful when pressing the cap onto the pen, as it is very sticky and will…
I have long had a problem with my whiteboard: loosing the pens or having them fall off the completely pointless 'shelf' that came with the whiteboard. So decided to make this simple ergonomic pen holder for up to 9 pens. It has 2 recessed…
As the original reservoir tends to crack, I design a replacement part which is thicker improve to orignal. Le réservoir original de cet aiguisoir avait tendance à craquer, j'ai donc conçu un remplacement plus résistant.
je nachdem, wie viele Stifte man besitzt - so viele Halter kann man drucken die Würfel sind 2cm hoch
C-clip sleeve for the Staedtler Noris digital jumbo stylus. It adds: - A snug C-grip around the jumbo barrel (rounded triangular faces — the jumbo is not flat-sided) - Magnet pockets to stick to the long edge of a Boox Note Air 3C - A…
This is a holder for 10 whiteboard markers for the Staedtler model 351 Lumocolor. The holder allows easy retrieval. I haven't tried other markers, but be sure to give it a try and report back!
je nachdem, wie viele Stifte man besitzt - so viele Halter kann man drucken die Würfel sind 2cm hoch
This cap will work with all Staedtler 925-25 and 925/35 mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with…