441 modeli
For "cocking engineers", who need a perfect amount of sugar or salt. I designed the sugar dispensers for the right sweetness in my morning coffee (while a salt dispenser came out just as a by-product, resulted from a mis-calculation of…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a easy printable sugar bag container with a part dedicated to the coffee stirrers. Perfect companion for instant espresso machines like nespresso. Print instructions Just print it and fill it.
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
This is V2 of my take on Sugar rocket motors. Added some fins for stability and a guide hole for launching straight up. The printing is straight forward. 0.3mm layer 3 walls 100% infill Supports (touching the buildplate 33% overhang angle)
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
This is a Cutter - Engraver i made for a Pastry Chef i made a few years ago. She wanted to decorate a birthday cake with 3D Baby Shoes made out of Sugar Paste (Fondant). There are 6 pieces that cuts sugar paste and combining all pieces…
Wydruk około 6,10 €–7,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print as you wish, it will be hard to have it wrong
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
A little box for four sugar cubes. I designed it für cubes in the size of 16 mm x 16.5 mm x 11 mm. I uploaded also the *.f3d file, thus you can adjust it. You have to print it twice.
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Just flipped makes this model look completely different! VASE MODE but I like to do 2 perimeters for strength sometimes! Original Sugar Cube Vase…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop It looks like it's always falling to the right! So weird! New Versions available: https://www.printables.com/model/541016-sugar-cube-spiral-vases-v2
Fun Sugar Skull keychains. Print in two colors for the best look. Color change at layer 26 if printing in 0.2 layer height. Layer height = 0.2 3 Walls Infill = 25% Wall Generator = Arachne Note: Set “Top Surface” Line width to 0.32 (Using…
This sugar dispenser dispenses teaspoon-sized doses of sugar by rotating the knob. The reservoir contains about 60 grams of sugar, enough for plenty cups of tea! Print instructions Print at 0.15mm layer height for best fit of threaded…
This is a stencil to create the sugar cross design the Almond Cake is famous for. The stencil is 10 inches tall so you would have to scale it within Cura to fit your cake pan. Additionally it has a raised area for easy removal after the…
My mother had a wooden sugar shovel and my sister also wanted one of that size. My father then said he would like to have "one number" smaller. So I took my calipers, took some measurements and created a quick model in Fusion 360. Nothing…
This is a brush holder for your makeup brushes. Made to fit: 2 large brushes (15mm ø) 1 large brush with flat handle (20mm×10mm) 10 medium brushes (0.9mm ø) UPDATE: Added hexagon cavities to add weight to the holder. Add custom G-Code to…
this is for true grow a garden fan wanting to go farther than just playing
IMPORTANT: This is the 3 slot version. The single slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm Update 11/01/2024 Added a new box of size W 200mm x H 200mm Update 22/11/23 Added 2 smaller…
No supports At 100% scale each sugar bomb is 24.8mm tall, or the size of a very large Corn Pop. These were designed for a 0.4mm diameter nozzle. The tail section has a constant width of 0.8mm FYI. Cereal should be light weight, so…
A simple Sugar Pot design with room for the spoon.
Flower Sugar Skull Bring a touch of Día de los Muertos flair to your desk, shelf, or altar with this intricately detailed Flower Sugar Skull! Perfect for lovers of decorative art, cosplay props, or unique home décor, this 3D-printable…
Ironically I needed something with a solid base, so this is just the same thing with a solid base layer and some cutouts to let light through for decoration. Photo used courtesy Travis Elijah, all photo rights reside with him, thank you…
This is a case for Raspberry Pi 3/4 and the PiSugar 2 PRO (The Pisugar is a UPS for Raspberry pi : https://www.pisugar.com/).
This is a case for Raspberry Pi Zero 2 W and the PiSugar 2 (The Pisugar is a UPS for the Pi Zero: https://www.pisugar.com/). This case needs 4 off M2.5 x 12mm long screws to clamp the Pisugar to the Pi Zero through the bottom of the case.…
Here is the Sugar Glider model! This free listing includes only the single-color STL for printing. On my Patreon you'll get the multicolor 3MF files, easy-to-paint STLs, keychain versions and split-color files, plus access to 60+ other…
Print at 100% infill with a layer height of 0.15mm with a base layer of 0.2mm Filaments Used: PETG KVP Black PETG Polymaker PolyLite Dark Blue PETG Polymaker PolyLite Silver PETG Overture White Swap Instructions: Start with Black At layer…
The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…
After keeping sweetener packets in a small bowl for years, I decided it was about time to make something a bit more stylish. This minimalist holder will accommodate pretty much any sweetener packet: Sugar, Splenda, as well as unsweetened…
Screw top containers for tea, coffee and sugar They have been designed to print without supports If there is anything else you want added to the set - let me know in the comments :) @3DPrintBunny
Features: USB C charging port 2 buttons (need tolerance check when printing) side hook perfect fit for the display perfect fit for the battery + the magnet mount to the Pisugar 3 the lid is a tight fit but it has 2 holes for easy removal…
Decorative multi color sugar skull. Suitable for candy or as a planter. Print instructions In Prusa Slicer clik Split to Parts It needs supports under the back, eyes and decorations, Scale %100 or above No raft No brim
A festive and ornamental take on the classic skull, this piece is adorned with floral carvings that give it a lively and celebratory look. Inspired by traditional sugar skulls, it's perfect for adding both charm and symbolism to your…
Ive printed quite a few cigarette cases that ended up not being the right size or not very durable with hinges in pla so I decided to just make one myself. Holds 18 king sized ryo cigarettes with dividers to keep them from moving around.…
English We created this model of a Calaverita de azúcar commonly used on Day of the Dead altars. The model is divided into two parts: the skull itself and the decorative elements typically found on sugar skulls. These pieces are separated…
How to print: the bowl can easily be printed standing up without any support or with some support around the base if you like the cap, on the other hand, must be molded with the handle upwards using low density supports to facilitate…
Merlin's sugar pot. 2 variations. Category: Kitchen & Dining
I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…
The trick is to GO SLOW ! This will want to bend when it gets tall so SLOW IT DOWN! By the time I got to the top cube I was at 45% speed.
Decorate your wall with a monochromatic smoky sugar skull. Created with Firefly and Hueforge and printed on the Bambu Lab X1C. STL and Bambu 3MF files available. Hueforge color settings I used (but you can choose your own): Layer 0-6 -…
This is a remix of my famous Sugar Cube Tree that fits the LED Lamp Kit from BambuLabs. Tree prints with NO INFILL. No Supports - LED Kit: https://us.store.bambulab.com/products/led-lamp-kit-001?variant=41806987395208 The tree prints with…
This Case was created by/for BiblioTech Sans Frontieres, consider supporting them please. https://www.librarieswithoutborders.org/ New Version June 2024 larger, better cooling, better fit, easier assembly, etc This case is for the…
This is latest Skull sugar women 3d printable, download, print and share with me, you can also visit my cults profile - https://cults3d.com/en/users/Maskman120899/creations
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…
🌹 Rose Sugar Skull – A Blooming Tribute to Día de los Muertos 🌸💀 Celebrate beauty in the macabre with this intricately detailed Rose Sugar Skull , inspired by the vibrant spirit of Día de los Muertos. Some supports are needed. I used…
To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.
Celebrate color and craft with this Sugar Skull Holder. The sculpted relief catches light beautifully, while the hollow crown functions as a small vase or holder for dried stems, makeup brushes, pencils, or a tealight in a glass insert.…
A lighter case designed to fit a standard size Bic lighter adorned with a sugar skull. Halloween 2023 collection.
💖 Support Me If you like this model and want to use it for commercial purposes , you can support me on Patreon and get a commercial license https://www.patreon.com/cw/MonsieurPierre This detailed figurine is inspired by SUGA — known for…
Want to show appreciation? Consider checking out my Ko-fi After struggling with finding a good solution to add a filament cutter to my printhead for use with a 3DChameleon MMU, I decided to just make my own. NOTE: G-code is still being…
pisugar3-whisplay-chatbot-fdm
Based on this vase- https://www.printables.com/model/440085-sugar-cube-spiral-vase
Sugar Skull Christmas Ornaments Category: Decor
Alternative Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2" You can find the Case and Buttons here: https://www.thingiverse.com/thing:4551538
both tea and sugar crates measure 84mm x 84mm x 75mm @ 100% scale
An octopus-themed bowl that comes with a beautiful custom octopus spoon! There is a version that has the text “sugar” on the back and a version without that. This is an easy print, each part pretty smooth to print and looks elegant :) I…
This a remix of PantsManUK's remix. The original carabiner loop was a bit choppy when trying to send off to 3D Printing Services like PCBWay, so I fixed that. Also, the NEW_LID file is actually done by formlessform @formlessform_1988521…
Helps to feed your ants without them drowning them self. For small colonies only.
Sugar Skull Feline Friend Made for halloween / Day of the dead I decided to print this 350mm high and hand paint all of the white sections…. no small feat i can tell you. For the 350mm & 250mm versions Layer height : 0.32 Infil : 5% For…
I found multiple holders for the bigger spice bags, but scaling them down resulted in a thin wall. This one is for the 6cm wide bags, usually baking powder, yeast and vanillin sugar comes in this size.
THIS IS MY FIRST MODEL & IT SHOWS Print at your own risk! I'll put out an updated version eventually, but this is not as good as it should be! This is a little 3D-printable sugar flatcar I made, based on both the HLW and LGB equivalents.…
I'm working on a simple sugar rocket and I designed this nozzle starting from the most common nozzle shape I found on wikipedia (the converging-diverging nozzle). You will need a PVC tube with an internal diameter of 22mm and external…
This design allows anybody to feed bees and or attract them to their gardens for pollination. You can use a 2 gallon or 5 gallon bucket from the hardware store. This design almost eliminates drowning bees and fighting bees due to its…
fits in tight, push it in hard enough
The dimensions of the stand are: 14,8 (height) 5,4 (length) 5,4 (width) This is very fast and stable sugar rocket
Tisk bez podpor. Vrchní díl tisknut vrstvou 0,2 mm Spodní část vrstva 0,28 mm. Tisk z PETG. _________________________________ Printing without supports. The upper part is printed with a layer of 0.2 mm Bottom layer 0.28 mm. Printing from…
*(legal disclaimer at bottom) Safety: If undertaken please make sure it is legal in your location and fly model rockets outside and away from people, property, and living things, the methods in this guide can be dangerous and might not be…
This is a simple spoon for adding priming sugar to bottles. A Fusion 360 project file is included for easy modification.
We continue with the Spooky Halloween 2024 Series, and this time, we're introducing a striking sugar skull wall art. This piece features intricate, symmetrical lines and floral-inspired patterns, capturing the iconic Día de los Muertos…
The ornamental skull keychain was a design we created for a friend. The design is inspired by the logo of his bar, which resembles the style of Mexican skulls and sugar skulls. We think it's an interesting keychain to print now that…
Dispenser for Splenda packets, I uploaded with and without the corny joke for people who use a different sweetener or have no sense of humor. Prints without supports. Left dispenser can be screwed to wall or attached with command strips,…
Hi! I made this lovely sugar pot but you can also store more into the pot like plants or whatever you like! If you make it please share your pictures!! Printing settings Make sure that you use supports on the print for the parts like the…
Scoop for household things for example laundry washing powder, wheat, sugar or similar. Im using it for my washing powder and its perfect. No support needed.
🇧🇷 Bem-vindo a Brasil! Welcome to Brazil! This model was designed by Dany Sánchez in both regular version and MMU. Sugarloaf Mountain is one of the most famous and attractive landmarks of Rio de Janeiro, and Brazil, right after the…
Latest files are available on MakerWorld. Get the full color separated Plate Print Profiles: https://makerworld.com/en/models/19550 === Here is a container for sweetener packets. Similar to the ones you see in restaurants and diners. But…
IMPORTANT: This is the single slot version. The 3 slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm In a creative collaboration with designer cyanidesugar , we've crafted a stunning 3D model – a…
This Raspberry Pi Zero and Pi Sugar Battery case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This…
Simple petit entonnoir idéal pour recharger les emballages souples de sucre, en utilisant du sucre en paquet, bien moins cher. Simple little funnel ideal for refilling sugar squeeze packs, using much cheaper packaged sugar. Ender 3 / PETG…
Our 3D printable Tintin rocket is a fantastic model rocket for those looking for an adventure. The model comes with STL files for 3D printing, making it easy to create your own customized rocket. To add to the excitement, the rocket is…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lFG9yXjgM6p This file depicts some of the buildings of Alpullu Sugar Factory. The factory was opened by M.K.Ataturk in 1926. Category: 3D Printing
Sugar molecule cookie cutter. Makes a decent sized biscuit/cookie at 90mm x 56mm (approx 3.5" x 2.25"). New learner in the world of 3D printing so figuring it out as I go along. Print Settings Printer Brand: Monoprice Printer: Select Mini…
Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!
rinter: own build ndl v2 Rafts: No Support: Yes Resolution: 0.1 - 0.2 Infill: 40-60% Filament: Generic ABS orange and grey Notes: TODO: Make a build HowTo, some Photos from print. Print in ABS, Infill: 20-40%, Speed: 60mm/s, Bed: 90…
Update: Changed dimensions of teeth for better print quality. Use the “new version” STL.
2 Size Sugar Spoon It's printable without supports. I used supports to have a nicer surface inside…
This is a case for a Pwnagotchi that uses a Raspberry Pi Zero, PiSugar S battery, and Waveshare V4 E-Ink screen. Note: Once you put the SD Card in it is very hard to remove.
We own a sugar mill from tupperware and there is a small pastic cross which presses the sugar through the sieve. The problem is: this little cross formed plastic part is so weak, that the compressed sugar at the bottom of the mill forces…
Same great taste, now parametric! The OpenSCAD script here was used to generate a sugar packet holder of identical dimensions to my original and dmeehl's version that accomodates raw sugar packets. Print instructions Instructions Adjust…
___________________________________________________ UPDATE! FIXED!!! The threads on the bottle and a cap have been fixed! So, now there're two bottles: One is with wider bottle neck， another one - more narrow. “ cap screw1.stl ” fits "…
A Container to store Coffee Sugar Tea or any other stuff in. Autodesk Inventor files included for labeling. Print 0.2 PLA ABS Or PETG
Robert Libro Sugar Bowl is available with two different wall thicknesses. This is the version with the thinner walls. Support (Tree) Fuzzy skin
A customisable sugar rocket engine with exchangeable nozzles and a pad for static tests. This is a work in progress. I'll publish usage instructions when (and if) this model is ready and tested. Use at your own risk.
My wife needed a shade for a corner floor lamp as the one we originally had broke. Sketched in Fusion 360. LED bulb recommended! Print instructions Unassociated tags: floor lamp, Sugar Skull Category: Decor Summary My wife needed a shade…
This remix is based on the fantastic Pwnagotchi case for Waveshare and Pi Sugar v2 by MrDrem This case is designed to work with: Raspberry Pi Zero 1/2 Waveshare V2/3/4 Pisugar3 I hope this variation is helpful to others in the community!…
This rocket design was inspired by TKOR video: MAKE AT OWN RISK.
Feel free to adjust the length using the included SKP file.
Use this big funnel to pour sugar into large jar for making sugar syrup for bees. Nice wide neck to fit in plastic jug to maximize sugar flow into jug.
My old sugar bowl has broken so I've drawn and printed a new one :-) Category: Kitchen & Dining
This lid can snap onto a Tulip Weck jar (108 mm external diameter) and turns it into a salt or sugar cellar. The hinge consist of a piece of 1.75mm filament which has to be glued into place (or melted using ex. a soldering iron) Printing…
A basic case capable of taking a PiZero 2W and a PiSugar2. Comes with plenty of cooling holes. The lid is just a press fit.
Summary Sugar cubes in the size 16x16x11mm for children's play kitchen. Available as a single cube, set of 25 or 25 pieces kit card. Can be scaled without restrictions. Print I printed mine in 0.22 layer height, but anything above or…
Created off of svg files Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: any PLA PLA Black Category: Art
![Sugar Skull T-Rex [HueForge]](https://media.printables.com/media/prints/618058/images/4908613_b08f33b0-a724-4804-8f63-a957a0c710e8_c96f4a90-2bbe-4d33-9a52-ee172db3876f/2023-10-18-094313-1.jpg)
