1082 modeli
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Creation of a 3D printed learning tool for an experiment with surface tension
Three M3 x 10mm screws and three M3 nuts are needed. No heat is needed to embed them. The sandpaper band is 8 mm wide and can be from 65 to 80 mm long. It can be of any abrasive grain size.
A simple surface mount ATX PSU support frame. Works well with an EVGA 1000W PSU. Printed in PLA, more infill is better! 6x bolts (I think I used M6) required + ATX PSU mounting screws. Absolutely no warranty implied or given if you use…
Tube-shaped sand shovel with a handle and a flat surface at the bottom for tamping the sand. Also can be used for different materials like soil or gravel. Thanks to the narrow shape it's perfect to fill flower pots, where are plants…
Acumulative prusament surface or wall mounted shelf. One or two joints each spool face in surfaces. One bracket and two joints each spool face in shelf. Use M4 screws to fix the shelf pieces to the wall. Flat washers reinforce wall mount…
This is a testprint for finding the best possible shine and surface quality for a filament. I found this to be especially important for silk filaments. Too small layers might not shine that well. The model can be used with temperature…
Straightforward and reasonably quick print with 0.3mm default settings. Supports required under mounting wings. 0.150" holes for screws. Shown here in Flashforge Rainbow PLA. The power supply has the same dimensions as the dock itself and…
Boitier adaptation pour fixer un boitier d'interphone Aiphone encastré en version saillie. Besoin de 4 écrous M4 (Inox recommandé) Filament PETG Hauteur de couche 0.3mm Remplissage principal 15% mode grille Remplissage de la zone (en…
Just like the original model. print 2 The model is a snug fit around the adapter. Print Settings Printer Brand: Prusa MK3S+ Rafts: No Supports: No Resolution: .20 MM Speed Infill: 15% Material: Prusament ASA
I designed and printed this large surface area, clip-on, exhale filter holder for my 3M 6200 half face respirator. This allows me to use half a surgical mask to filter the air I breath out of the mask in order to protect others while I'm…
100% infill 0.12mm layer height mandatory Make bed leveling before starting the print
Works on Curved Surfaces Print In Place living hinge magnets will “conform” to curved surfaces of many different diameters. Required hardware 3 magnets - The model has holes for 3/8in x 1/8in magnets which you can get from the link below…
RaspiCam V2 Mount that can be fixed to any Flat Surface. You can drill small holes in the bottom to fix it with nuts and bolts Print instructions PLA/PETG 0.2mm layer height 20% Infill 4 Perimeters 5 Bottom/Top Layers No Rafts/Supports…
The model: Size: 84x155x42mm (width, length, depth) Strength: 2mm Two reinforced break-through holes on each angled side for surface mounting Eight holes for mounting the sockets in the box The print: Material: PETG Layer-height: 0.2mm…
This is my rendition of a 2-Gang Surface Mount Box for Decora Remote Controls specifically for the DBX ZC8 controls, might fit ZC9 as well. I recommend you do not use a boot in the RJ45 as there is limited space and keep the daisy chain…
I prefer to hardwire my phone for Android Auto. I wanted a designate place where to place phone and storage cable slack without compromising other features. So, I modeled this part, see picture for reference, I used double sided tape to…
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
wall art, coaster (two colours, four colours)
This hack enables you to close off the top of the Ryobi Storage Bin. By closing off the tray/bin with a flat worksurface your stuff is secured, and you can add tools (miter saw) to the top of it. You will not have to remove the tool from…
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
found this kind of tool useful sanding rounded and several other shaped surfaces but wasn’t happy with the performance of similar things. what to know about this first I just designed versions around some short threaded inserts I had on…
The main source page for this model is on GitHub. I provide it on Printables as well for your convenience, but the GitHub page may have more recent updates and more detailed instructions. Go to my site for an overview of my other models .…
This is a remix of Andrei's Bag Clip (PRINT IN PLACE CAM). His print profile remains unchanged. This is to add more surface area to the lever to reduce failed prints. This is something I learned from Joel Telling's (3D Printing Nerd)…
I really liked the original model by @gdrag and the idea of @Lorro to use a wavy mesh. So I combined the two to get a smooth external surface with the wavy mesh. It prints faster avoiding retractions and with less vibrations. The bottom…
Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…
Re-upload of another cool moon surface plate that I found on Thingiverse Please attribute the original creator, not me.
Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…
Hi, here is best replica of broken head band for Surface Headphones 2 to the date. I tried several of existing i found out on the brode web but non of them was 1:1. This model having same thicknesses and same diameter as original. I am…
This is a model of a Gyroid Surface. What's a Gyroid? https://en.wikipedia.org/wiki/Gyroid "A gyroid is an infinitely connected triply periodic minimal surface discovered by Alan Schoen in 1970." Glad we cleared that up. To put it another…
Prototype plant holder, for above surface plants in an aquarium. I use wooden sticks to keep the plants in place until the roots have grown trough the holes. Might need drill holes trough the holder handle and put in plastic screws to…
When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be. This test…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
I have created this small and quick print (20x20x1 mm) so you can quickly test the surface quality of your printer and calibrate accordingly. The model prints in under 10 minutes, and has a small wedge which you can use to easily pry it…
Slightly modified the bottom of the mount. Check out the original creator: https://www.thingiverse.com/thing:235874 visit my blog: http://www.maj.pavlin.si/ Category: DIY
Printed adapters for interfacing with the top of Dewalt toughsystem 2.0 boxes. Worksurface was cnc routed from ½" MDF by Sendcutsend.com (approximately $35 each at the time). Used these threaded inserts from the bottom side to attach…
A slice of lunar surface with craters, ridges and dust ripples across the top, a small astronaut figure standing near the edge, and a recessed well sized for a standard tealight. With a candle in it the crater walls throw long shadows…
This bundle features an OpenSCAD app to generate 2D or 3D single or multiple hexagonal grids, a JSON preset file, reference and tutorial PDF documents, sample STL and SVG files and PrusaSlicer examples. With this, you can: Set up to 5…
created a remix so i can make a light box with an led strip, great for wall art etc
Cord Wrapper, Flat or Curved Surfaces, Variable Diameters 4-14 in (100-356 mm). Secures flat or round cord (.25 in/6.3 mm diameter or 5/16 in/7.2 mm). If this isn’t exactly what you’re looking for, check out my other design here that…
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Stanley blade based surface scraper Uses 2x M3x12 and 2x M3 nut Designed so that if you use the flat of the 9 degree angle the blade will be juuuuuust above the surface Print instructions Category: 3D Printer Accessories
Here is my Hanging small size Storage Bin project. Originally it was meant and made for Honeycomb wall, but it went much better in my opinion as it become more universal and now it can be mounted on Honeycomb wall as originally was…
Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…
Voronoi desktop coaster, 10 centimeters in diameter.
Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…
Needed a surface mount electrical outlet box to fit regular 110V outlets and shields into.
I designed this few years ago. The pillars in ct spawn were meant to be supports, but in hindsight they are unnecessary and too bulky. Original file is lost, only have the .stl
There are 2 versions of this model available for printing. A single piece model that can be printed vertically with supports required (see pictures), and a two piece version which can be printed with less height requirement and supports…
This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and control its movement. To do this, I formed a surface from small pixels. Each flake is located…
Marston mat was a landing material used in ww2 by Allied forces. The one in the file is 1:35 you can simply adjust the scale by multiplying the lenght by 35 and then divide it by your scale in Tinkercad or different
MGN9 Linear Rail ever so slightly sits in the v-slot of 20mm v-slot extrusions due to the chamfers. Common t-nuts can't clamp down on a 20mm v-slot rail enough and as a result the rail is not held 100% secure. Aditionally the chamfer on…
This is a model I made to mount an old Surface Pro 4 I had around to be a smart-home control tablet. It MAY fit other surface products but I have not tested them. It mounts to any wall using standard #6 screws. To place the screws…
Thin cross shaped walls. Designed to test PrintDry appliance before and after filament drying. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: Doesn't Matter Resolution: 0.25 Infill: 100% Category: 3D…
Settings for Bambu Studio or Orca Slicer. Print with Bambu AMS and the ability to access different filaments. Sample on one example object with Generic PLA and Generic PETG Print without Prime Tower for save Filament! All settings see…
A basket that can hang into an aquarium and hold medium. This is great for rooting cuttings or planting decoration allowing the plant to take advantage of the nutrients in the aquarium from the fish &/or decorating the aquarium with plants
Newly Designed Curved Surface Sander 2.0 by MINI EGG! Utilizes 3D printing features for assembly without any hardware parts. Recommended sandpaper size: 10mm x 70mm
A complete skimmer to keep the water surface clean for your fishtank. 09.02.24: additional skimmer basked added You can connect a hose directly to your external filter or pump. It is also possible to use Eheim connectors at the top and…
This is a general purpose low profile wall mount case for the Guition JC3248W535 3.5" display. The front part supports the display using the screws supplied, and clips onto the wall mount bracket. I specifically made this to mount the…
This is hand wheels knob for CNC 3018 X and Z axis (diameter 8 mm). Printed grey looks very nice on machine. Knob radius is 24 mm and thickness is 10 mm. It is meant to be used on 8 mm lead screw so it has 8.1 mm hole which is big enough…
This knob is replacement for Prusa display control knob. Printed in grey looks great. Hole for axis is 6.3 mm in diameter if you consider using it for something else. There is also "light" version. Knob body is hollow. Material save is…
inspire from https://www.thingiverse.com/thing:5845258 I updated the curve surface sander by adding a zigzag on the sandpaper contact surface to improve its stability during sanding and also introduced a mini version of the sander to…
Designed this few years ago. You need to print both files in order to complete the design. Upper part doesn't have all the roofs because they would need tons of supports. Roofs and other support are printed together with the lower B site…
Needed car clips for my dashcam. Requires foam tape (I used thin VHB foam tape) Print on its side. If youre using it in a car id reccomend using PETG instead of PLA.
A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…
Faster print speeds can result in prints coming out less glossy even when printing with the same material. I've included a PrusaSlicer project that contains 9 test units all printing with the same settings, except each one has the…
Use your phone or tablet together with your laptop as a second screen. Can be stretched/shortened to fit laptops of different sizes. Print profiles included. Differences between versions: Macbook version - use this version if you have a…
This is a (somewhat) accurate model of the Ikea Blåhaj! 🦈 I've wanted a decent model for years, but all the ones online have either been inaccurate, or not remotely printer friendly. This was made in Fusion 360 using surface modelling, it…
A sample knurled surface. Designed in OpenSCAD Print Settings Supports: No Resolution: 0.2 or less Infill: 100 Category: 3D Printing Tests
I saw a Prusa post a few months ago about some new infill options they added to their Slicer and decided to print some samples so I can reference them when deciding what to use for a print. I copied their hexagonal sample idea, and after…
After observing several nice automotive logos that are available for printing, and observing the severely aged and fading Ford badge on the back of my truck, I sought a potential replacement. I wanted an option that retains the contoured…
Simple mount for a Surface Pro. Should fit Pro 4 or newer with Type Cover.
How to check if your top surfaces are printing properly with this test print? Check to see if there are any gaps in the top surface Look at the dome and see if it was printed properly Look at the slope and make shore there are no pockets…
The clips will push into the aluminum work surface used on the Snapmaker machine when set up for work with laser. One side pushes against thick work, the other will hold down paper or cardboard. I found the rubber pieces that Snapmaker…
Background I was using an inductive sensor as my main Z_min sensor. I was unable to use it as bed leveling sensor because I was using a very thin and soft steel plate under the glass. This lead to several issues: the glass itself is not…
Updated with .3mf files (smaller) Wanted the famous Tintin rocket, so my choice stopped with the Maxdarkdog model, which is easy to print without support, and in my opinion, one of the nicest when assembled. I scaled it to 75% (27 cm.)…
Laptop chargers are always a hassle. This add-on for the Surface's charger makes managing the wires easier. Everything is printed in place. Tested with 0.4mm nozzle and 0.2 layer height. It is my first print in place design, so I'm not…
Test print for check the flatness of the hotbed for Anycubic Kobra S1. Dimension : 250 x 250 mm Link :…
0.2/0.3mm layer height 100% infill 3 perimeters.
Mars Lamp, one of the Planet Lamp series. There is no paint. Thanks to its 3D modeled reliefs, when a light bulb turned on inside, it gives the silhouette of the Mars. A nice decoration and night lamp in my opinion :) Perfect for…
The mount fits any 75x75 VESA plate with M4 screw holes and a Surface (or tablet) measuring 287 mm x 208 mm x 9.3 mm. I printed the pieces on a Mini+ with PLA (3.5h per piece). Pick one of two screw hole pairs to either orient the mount…
An all-in-one cable organizer for the Microsoft Surface power supply [3.54 x 1.97 x 0.98 in (90 x 50 x 25 mm)]. This original design offers the following features: two-pieces - print without supports and locks the power supply in place…
I used the landing coordinates from the Chandrayaan-3 Wikipedia and Moon Trek to generate a 3D print of the moon surface. The print shows +/- 1 degree of latitude/longitude from the landing site with the exact landing coordinates being…
A vibrant collection of a dozen solid 3D‑printed Easter eggs, each featuring a unique geometric surface pattern—spiral ridges, wavy flows, lattice grids, ripples, facets, and more. Designed for easy printing, these eggs make great…
Aufputz Gehäuse für Busch Jäger Balance Si Serie. Für 1-Fach, 2-Fach und 3-Fach - Rahmen. Update: Auf Wunsch von @David_1297020 eine 2x2 Variante hinzugefügt. Surface-mounted housing for “Busch Jäger Balance Si series”. For 1-compartment,…
Print the main parts sideways and print the bolts with threads facing upwards. The models are labeled with the diameter of the circular shape of the main part. The base is 5cm wide. There are two bolt sizes. The same design for flat…
Simply took the original bucket lid and split it adding holes for reconnection using 10-32 nuts and bolts.
If you ever wanted a flat surface to work on in between or next to your gridfinity bins or tool holders, this is what this is for. Using the OpenSCAD Extended library, I made a bunch of preset prints available for easy use. This is the…
A River Surface Cleaning Robot is an autonomous robotic device designed to remove debris and pollution from the surface of rivers, lakes, and other bodies of water. The robot typically consists of a floating platform equipped with a range…
Based on surface skimmer by ArjitJangid ( https://www.thingiverse.com/thing:2879673 ) but redesigned from scratch with easier printing in mind. Added a mounting point for Eheim 727110 suction cups ( https://www.ebay.com/itm/190794265260…
Kabeldose um nicht benötigte Kable zu verstauen, oder Kabel zu verteilen.. Cable box to store unneeded cables or to dis
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
Marked as original model (as I made this one), but there could be similar/same models like this out there, didn't check.
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
