343 modeli
An antique inspired plant pot design with the fill of quilted fabric Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter perimeters - for a stroneger print)…
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
I used the same technique for my new Zelda wall art. I explain the process on my previous Zelda Wall Art model . This time the wall art uses four color printing by changing the filament at various levels.
Wydruk około 3,87 €–4,72 € nettoWstępna wycena jednego wariantu
Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! This is a rather simple model, based on an existing one with a few additions. The source is on Thingiverse by Suptommy9011, the resolution is not mind-blowing…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Scimitar of the Seven : Legend of Zelda : Tears of the Kingdom.
Wydruk około 22,00 €–26,89 € nettoWstępna wycena jednego wariantu
So in a surprise to absolutely no-one who knows me, I love Hollow Knight. For those unfamiliar, it is a beautiful platformer by Team Cherry - with incredible art, beautiful music, and a brutal Souls-like meets Metroidvania challenge. I…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Print in 0.20mm and glue the handle on the back of the stamp part ! Enjoy your cookies !
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Why I wanted to get better at using topographic data sources and incorporating them into models. Model Details Data Source The Whanganui topological data was sourced from https://www.opentopography.org/ using the Shuttle Radar Topography…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
Link, Purah, and two Zeldas. They’re definitely going to need supports, and I also recommend scaling them up nice and big before slicing, assuming you want the fine details. Have fun with these, and if you want to see more, give a like…
If you print at 0.2 layer height, you'll get the same pattern as in the pictures. Below 0.2, the pattern changes, and at
"Yahaha! You found me!" I love Koroks, especially the ever-tired ones that lop around with a backpack twice their size. They are charming and never fail to make me smile whenever I come across them :) There are two versions of this model:…
This is a digital 3D printable model of Link’s Ultrahand Rings from the new game, Legends of Zelda Tears of the Kingdom. The complete Ultrahand files here! The download contains pieces of the model ready to be 3D printed on a 200 mm print…
Recommended to print at 100% infill with 3 perimeters to make sure that no water leaks. Originally based off of https://www.thingiverse.com/thing:3530406 but completely remade to remove a weird hard edge line.
Simple teardrop shaped NFC tag keychain that encloses a 25mm NFC chip. This model includes a 26 mm wide and 1 mm deep internal chamber where the chip should be placed when printing. This should make this model compatible with most 25mm…
I've provided my PrusaSlicer 3MF file and GCODE for Prusa MK3S+ at 100%. It provides a nice balance of print quality, speed and weight. If you want even better quality, you may want to increase the supports or use 2 perimeters everywhere.…
The goddess statue from Tears of the Kingdom. (From the Temple of Time.) Prints without supports. If you have any questions, complaints, thoughts or requests, let me know! If you need help with anything I’ll help you as well as I can.…
Modified Rawolr's Master Sword files from thingiverse to turn it into the one from the Tears of the Kingdom trailer, most files are the exact same as the non-metal rod version of the original, only changes are Blade_1, Blade_2 and Blade_3…
Add a filament swap for the details to add contrast.
The entire logo is divided into 7 parts, which can be easily printed with just a change of color during printing, and simply glued together. Use black as the base color (for all models, black will be up to 1 mm in height, except for the…
There’s two versions, one with a chain and one without. Pretty simple. Print it as is but with support on the build plate. You could use this file to make a keychain, earrings, a necklace, or whatever you want. If you make it, please post…
Finally, an updated Moblin with his tough new horn from The Legend of Zelda Tears of the Kingdom. Of all the enemy horn glow ups, moblins fared the best. (Except maybe the pinecone-headed black moblin). Still I think the red moblin horn…
I have since published a better Link model here. Introducing TOTK Link. Needs plenty of supports. I hope to see some makes, particularly if you paint it! I make lots of Zelda models, so if you like this, come check out the other stuff I…
I remixed the original to fix a few issues I found when using it with my masking/painters tape. Problems The U shape that slid on from the side This design of the original made the model inherently roll thickness specific so as you used…
This is a toy plane that is based on the famous Boeing Stearman Model 75 biplane. https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75 The toy plane has a wingspan of 240mm and a length of 196mm. It can be completely assembled without…
The Light Dragon from Tears of the Kingdom. It’s definitely going to need supports, and I also recommend scaling it up nice and big before slicing, assuming you want the fine details. Have fun with this, and if you want to see more, give…
Functional nose retract. Retractable landing gear for RC airplanes. Can be used for models with a flight weight of approximately 700-900g. All parts were printed with PLA filament. No special settings are required. Standard settings are…
A model that I designed based off of art from Tears of The Kingdom. This key was designed to be printed with either a multimaterial upgrade, or just any stock printer. The golden inlaid text can be disabled for non-multimaterial printers,…
Work in progress! A full Halloween costume/cosplay for Link in the Soldier Armor from Tears of the Kingdom, including the Ultrahand. I made every piece from scratch in Blender based on in-game models. More pictures and more detailed…
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
Was excited for the upcoming game, so I remixed one of my favorite comfort grips with some of the promotional art!
Single piece earrings in 4 designs, Honeycomb, Geometric, Bubbles, and Chevron Printed at 100% infill
3D printed Stand does give the Nintendo Switch a unique aura, taking it from gaming device to home decor in a way that really adds a certain element of fantasy to your home. You could place it on your coffee table, TV console, or anywhere…
An intimidating Ganondorf Bust from Tears of the Kingdom. If you print this, please post your make! And if you like this, please give it a like and follow me to see more. (Needs supports)
This is a strange plant/mushroom hybrid. Again, this one is rather massive. This could be a distant descendant of today's water melons. ;-) Be that as it may, cutting it into pieces and eating it isn't advised - at all. Growing in…
Original design by RoboMagus. I just made the ears solid with an inset. so you can have different coloured inlays.
Five keychains from The legend of Zelda Breath of the Wild/Tears of the Kingdom: Heart Container Stamina Vessel Daybreaker Shield Rupee Star Fragment You‘ll have to rotate and slice it yourself before printing. If you want me to upload…
This is a 3d interpretation of the logo, perfect for wall art or jewelry. I made this fairly early in the title reveal hype cycle so it does lack some details like some of the runes, and has no main purpose as a model. As it currently is…
Four styles of teardrop shaped Christmas tree ornaments. Print in your favorite silk PLA (dual color works well) to add some shine. Print on the top end (upside down) with a brim to add stability. Once printed, tie a 160mm length of…
100% custom teardrop trailer inteded to be placed behind my 1/24th scale cars. All dimensions are in mm and corresponds to full scale. You can scale it to the desired size. Two variants are included: smooth side and (partially) corrugated…
High Tack Tape Dispensing Tear Aid. Printed in a honeycomb pattern to save filament.
I printed the original and can say it works well and prints fast but I found myself needing a way to get the filament boogers off the back side of my nozzle too. So I made this remix to make the handle hole useful. You can use this just…
I have different types of NFC stickers, and for some event I needed an amount of tags. I wasn't sure how many tags, and what type. I created a couple of the original closed tags too because they look really clean. These ones are a bit…
A request made by one of my followers. There are 3 different takes on the eye design, because it’s kind of hard to know what direction to go with the eyes. Without color, the chuchu is essentially a blob, so I tried making a version with…
This are just test Gcodes (two) for more info (userguide) please look at: https://3dlabprint.com/shop/stearman-pt-17-kaydet/
This guitar is modified from the original Prusacaster design with some design tweaks and other minor fixes so that it fits the common guitar parts purchased from Amazon. Guitar parts I used:…
My print settings: Material : PLA (with this design it's not the strongest) Infill: 100% (it's only 2g per tab) Ironing: on
“hey, listen!”
After many many revisions of my designs, I've finally settled on this design. Its strong, really easy to use and cuts the tape with minimal effort. Fits all 50mm wide packing/masking tape with internal diameter of >70mm All parts are easy…
Main proportions are taken from a Tecnifibre Carboflex Cannonball 125. Key ring hole is 2.4 mm in diameter. If you wish to print with two colours using a single nozzle, you can find here the models for the racquet split into “bottom +…
Board game insert for Turing Machine that supports sleeved cards (criteria cards only) ##### Updated 2023/05/10 ##### Added spacers so the components stay in place a little better and the cardboard spacers can be tossed. Here is a short…
This is a large one piece object to scale to your desired size.
Modeled after the NSX-R, Type-S shift knob. There are several variations on this model: standard - replica of the original shift knob standard, countersunk - sits approximately 20mm lower shortened - The stem was reduced by about 25mm…
The Boeing-Stearman Model 75 is a biplane that served as a primary trainer aircraft for military pilots in the 1930s and 1940s. Built by the Stearman Aircraft Company, later a part of Boeing, it was known for its sturdy construction and…
Teardop hanging planter. Hang from the ceiling with jute or rope. Category: Outdoor & Garden
Print in a light color with PETG. Print with 4 (for 0.4 mm nozzle) perimeters so no infill is used in the walls. No supports required.
Crazy Cart Steering wheel upgrade using one 3D printed part, $30 amazon quick disconnect and $3 dollars worth of hardware parts. REQUIRES ≥ 60% INFILL and Plate support. Amazon quick disconnect: https://amzn.to/3uPwxLy Ace Hardware: -…
These are the 3D printed parts I created to create the cockpit for a 1/3 scale Boeing Stearman. The plane is a Balsa USA kit and will be powered with a seven cylinder 250cc Moki Radial Engine. Print Settings Printer Brand: Up! Printer: Up…
Love the Skytear MOBA game, and always thought it needed a nice way to pack everything from it in the main core game box. I took inspiration from the awesome laser cut insert made by…
I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better…
these are 4 keychains each based of a different rune in the legend of Zelda tears of the kingdom (TOTK) including ultra hand, fuse, ascend and recall. These keychains can be used on a bag, set of keys or anything else. (keychain equipment…
A remix of Punkelopment’s USSR sewing kit replica. Designed so that 2” tape can be wrapped around the outside. When used with the original spool there is space for safety pins to be stored to. Similar to the modern version just with more…
Here's a new design for the holiday season. The ornament has two patterns that alternate. I was able to get reasonably good prints by printing the ornament as a single piece, but by cutting the ornament in two, I reduced print time and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Discover the Elegant Teardrop Vase, an elegant and minimalist 3D printable design from the Teardrop Collection by Mythos Models. Inspired by the pure, serene form of a falling drop, this vase embodies stillness, balance, and quiet…
If you like Zelda TOTK and 3D printing, here is you printbed scraper. This is a scraper with the TOTK pattern remixed from this varonoi scraper . I've printed it with 15% infill and 0.2 mm layers, and it's pretty strong. TOTK Source pattern
Lizalfos come in many colors and love jump-scaring travelers and heroes. Or spear fishing when the former can't be found. All subtypes are available here, including the old fashioned horn from BotW. This miniature is approximately 38 mm…
if you don't know how to use a box....
NOTE: I bought another set for a family member, and found the cards were ever so slightly sized differently. I created a second design from scratch for the 1mm cards, and am much happier with the results. Painting on seams so they aren't…
this is a tear from the video game "the legend of zelda tears of the kingdom"
Hi Greg, here are three options to the masks as George Ragan vocals band members mask changed numerious times over the past several years. See below attached link http://hollywoodundead.wikia.com/wiki/Johnny\_3\_Tears Please show of some…
Discover the Modern Teardrop Vase (Teardrop Collection), an elegant and minimalist 3D printable design from the Teardrop Collection by Mythos Models. Inspired by the pure, serene form of a falling drop, this vase embodies stillness,…
Wall mountable toilet paper roll holder for standard 115mm rolls (45mm core diameter). Following are the features: 1. Can be easily mounted to the wall using the inbuilt hook holes and holders using 3M tape or can be used directly with…
No supports needed on this print. It is a design of a tear drop modern vase. Please share with me your prints. Enjoy.
Stearman biplane circa late 1930s. Print wings vertical. Use rubber bands when gluing wings to struts.
Lizalfos come in all sorts of colors, and now you can paint every color of tongue. This miniature is approximately 38 mm scale, meant for a 40mm base. Lizalfos are known to have weak ankles, so keep that in mind when making your miniature.
These are catears as found everywhere at the 37c3 made by c3cat and the people behind it, including me. The original 3D model was designed by djerun in OpenSCAD as being able to be found on our wiki . I made multiple sizes for it, and…
A decorative door weight inspired from Zelda Tears of the Kingdom to keep your door open (Just realised the
This is a printable tray for holding small parts while repairing. Better printed in Flexible filament. Also uploaded the Sketchup model for mods. as well as the printable model for the Ender 3 using Flexible filament.
Print your own 1:145 scale model of the Stearman PT-17 aircraft! The Boeing-Stearman PT-17, commonly known as the Stearman, was one of the primary trainer aircraft for the U.S. Army Air Corps and U.S. Navy during World War II. It was used…
For anyone who's played the legend of zelda: Tears of the Kingdom, you know the utility of the Brightbloom seed, the light in the dark. When I looked around to print one, I couldn't believe it! Nobody had made a brightbloom seed lamp ??…
I made one of the tears that can be found on the game Zelda Tears of the Kingdom. Hope you enjoy it! Category: Art
I used a 15mm brim and some tree supports for the bottom half of the model. The geometry I included into the top half takes care of the rest. See pics.
These are the four letter tiles (two lines and two curves) compatible with Learning without Tears or Handwriting without Tears curriculum. They are modeled with a 5 mm height and can fit on a standard Ender 3v2 bed if printed diagonally…
Nice earrings colletion!
just glue together and have fun!
Here's an elegant new ornament design loosely on the British crown. It's extremely light if you print with my settings. I've provided my PrusaSlicer 3MF file and GCODE for a Prusa MK3S+. The ornament looks particularly good in 2 or 3…
This is the long bar to use instead of the wooden one, with the original 2 hooks. This is the bar only.
Blupee from the Legend of Zelda: Tears of a Kingdom
it is a nintendo switch dock
I made this easy to print model of the Roboco glasses. I did it because in my third world country it is difficult to find official lenses. To attach the glasses I recommend using a needle and thread, and to make the legs of the glasses…
Instead of a regular blank wheel it has a Pontiac logo to make it look better
A moblin, approximately 38mm scale, tossing what appears to be a bad idea straight towards you. Scaled for a 50 mm base. Five versions of the model are available, there are stl files for each of the moblin types and a fifth .3mf file that…
Retail box insert for this awesome boardgame, replaces the cardboard insert that comes with the game. Made using the Parametric Card Box OpenScad project by Roguenorm on Thingiverse. (https://www.thingiverse.com/thing:3072760) The insert…
Tear off edge for a paper towel.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 I used the paper towel holder from roto02…
I've re-envisioned my Grand Kaleidoscope Ball as a teardrop, going back to my original files and redesigning it from the ground up. The ornament looks dramatically different from each angle. I've printed it here in 2 pieces. The first 3…
I created this to hold and organize all my small components during a camshaft replacement. this tray stores all the head bolts (large and small), push-rods, and lifters. This tray will also keep pushrods in their correct orientation. I…
The tear necklace from Conan Gray so you can stencil for metal or print and wear.
A tear-drop or gourd-shaped birdhouse with a roof and landing peg! Printed in 4 parts: the Body, the Peg, the Roof, and the Tube. Birdhouse measures 8 inches tall (203.2 mm) x 6.65 inches wide (168.91 mm) x 7.69 inches deep (195.33 mm)…
Lizalfos come in all sorts of colors, but the red ones are unique in their ability to breath fire. They also have a lava horn useful for burning things. This miniature is approximately 38 mm scale, shown on a 40mm base. Lizalfos are known…
From the Legend of Zelda game fan machine model, transformed into a handheld fan, so that fans and friends can experience the feeling of Zelda。 Model demonstration video from my video channel. YouTube:…
