Liczymy pasujące modele…
Thread pitch - 1.25 Thread diameter - 10mm Compatible with Logitech G25, G27, G29, G920 and Thrustmaster TH8 Print PETG with 15% infill ASA - not tested PLA - not tested
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm
Printing recommendations I've printed a first prototype in PLA, we'll see how long it lasts. Might print an ABS/ASA one and vapor smooth it for better finish. 0.15 LH 0.4mm nozzle No supports required Use high infill (I've used 50%) to…
I designed a screw on shift knob for the Thrustmaster TH8A shifter. Just remove the old one and screw on the new printed one with a little presure from above. I used PETG.
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
TH8A shifter Playseat Challenge mount Robust shifter mount for mounting Thrustmaster TH8A to a Playseat Challenge sim racing chair. Printing Rotate the models as shown below. Use supports. Use at least 5 wall loops. Mounting Use six M6…
Playseat Challenge mount for a Shifter (TH8A/G29) with handbrake mount
A tiny blocker for the Thrustmaster TH8A shifter. It's a bit longer than other models, to block the path to the 7th gear. In a normal movement to the right, you will hit the print and with a bit pressure you can go into reverse. Print…
I made this bracket because i bought one without a bracket and want it lower from the table. 2 M8 nuts and 2 M8 wing bolts are require.
If you have installed a short shifter mod, you'll find that there is no protection from scratches on your gear lever stick from hitting the faceplate. Sure you can heatshrink some tubing, but that will only last you a week before you'll…
Remixed Harsesis Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount according to his recommendations which was to move the hand brake a bit further to the front and the shifter a bit to the outside (right). Also added slots…
With printed 3.5mm pads Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 50 Filament: CCTREE PLA Category: Hobby
My collection of custom shift pattern plates for the Thrustmaster TH8A Shifter for use with ETS2 and ATS. The following gearboxes are covered: Scania 12 and 12+2 Volvo 12 and 12+2 ZF-12 and ZF-16 Eaton Fuller 10, 13, and 16 There is also…
I bought my shifter used.. with no clamp, sounds like a project for the 3D printer. The clamp turned out pretty tough, seems with withstand the abuse. Only time will tell. Brief Instructions: -To reinforce and add to the longevity, i left…
I've done a couple of changes since the original model: Made it a bit shorter (doesn't affect the overall length as the thread is in the same place). Split the model into 3 to print the middle part in a different color.
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.
No other tools required. I printed it with the sturdy profile, arachne, and a 0.6mm nozzle on a P1S.
The hole is 8.5mm so you can take a M9 thread cutter to make it fit on the original shifter pole.
A mod to reduce the shifter to a 6-gear version. No more accidentally slide into the 7th gear while shifting into 5th.
The intermediate apparatus I designed to attach the Scania gear shift knob.
TH8A Shifter Mod Block to make the shifting feel more tactile.
Scania 12+2 , Volvo 12+2 , Eaton 18 , ZF 16 pro řadící páku TH8A
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A. There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am…
This is a slightly altered version, intended to be printed with TPU (flex) as I don't like the idea that the metal shaft is simply rubbing against rigid plastic. I'd describe the feeling as “dampened”. It's still notchy and tactile but…
This is a remix of the original TH8S knob adapter. While the original design was limited strictly to the TH8S, this remixed version enables you to use all the custom shift knobs created for the TH8S contest on your premium Thrustmaster…
Hi Internet Sim Makers, This is just a very quick remix of the mounting plate for the TH8A / TH8RS Mini Button Box by AndreaSmit. https://www.thingiverse.com/thing:2883090 Absolutely no credit taken here... all I did was split the base…
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
cable post for ANX truck gearbox but it can also go with any other way, I made 2 slots for 2 clamps with a width of 3.45/3.50mm printed with light weight media and if possible for easy printer cleaning without brim truck knob i used :…
This adapter allows you to attach your favorite bicycle grip as a shifter knob to the Thrustmaster TH8A shifter. When I was playing a WRC simulator, I found myself wanting a stick-shaped shift knob like those in rally cars. Since I had…
I redesigned the part considering the dimensions of the 3060 aluminum profile and 6mm holes for M6 screws. I printed it with 25% infill
Robust mount with a shorter cantilever for higher strength and stiffness
TH8A TactMod+ by @zhutwo, with holes for M12 ball plungers. I was not able to find M12 nylon-ball plungers shorter than 20mm, which required a slight modification to the casing, but this provides the best tactile "bump." Category: Hobby
Ich habe für einen Freund diese Datei entworfen. Sie ist um bei einem Thrustmaster TH8A den 7 Gang auszublenden um nicht in die Schaltgasse des siebten Gangs zu rutschen. Wie man sieht wird das Teil nur eingesteckt und kann daher auch…
The threads on my thrustmaster shifter clamp had worn out completely so I made this to replace them. You need to print 1 of the base and 2 of the screws. How to install: Remove original screw: I used bolt cutters because I couldn't find a…
can be printed in any filament type, mine was printed in PLA. Depending on your printer you may need supports for the threads on the bottom. The thread run up all the way near the top, this provides a really strong shifter and will not…
The legs of the spider move to make the spider pose in a forwards, backwards or sideways position as you shift through the gears. Uses the Thrustmaster adapter as in the " THRUSTMASTER : Official TH8S Gear knob files " page. The part…
When I mounted my TH8A shifter onto my sim rig, I managed to lose the foot that attaches the desk clamp to the shifter. Before selling it when I upgraded, I needed to throw a replacement together so the new owner can use it on a desk if…
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
Ich habe für einen Freund diese Datei entworfen. Sie ist um bei einem Thrustmaster TH8A den 7 Gang auszublenden um nicht in die Schaltgasse des siebten Gangs zu rutschen. Wie man sieht wird das Teil nur eingesteckt und kann daher auch…
Robust mount with a shorter cantilever for higher strength and stiffness
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
