831 modeli
A low poly model for 3D-printing of Rodin's Le Poète , The poet in English, and commonly know as The Thinker . Print instructions All three models somewhat complicated prints but the easy to print one uses bridges for the worst overhangs,…
Wydruk około 14,65 €–17,90 € nettoWstępna wycena jednego wariantu
Detailed ‘The Thinker’ from Rodin Detailed version of ‘The Thinker’ From Rodin. All credits to the original creator. Model downloaded from Sketchfab @ ‘Scan The World’.
Wydruk około 13,46 €–16,45 € nettoWstępna wycena jednego wariantu
Use tree supports on build plate only + rear seam position. Introducing the Low Poly Thinker, a modern take on the classic sculpture! Standing at 115 mm tall, this geometric masterpiece is perfect for art enthusiasts and fans of…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
LXO's Lowest poly The Thinker is one of my favorite models and has become somewhat of an icon for me. I've printed dozens of them, it is essentially my Benchy . Since I love it so much, and the original model is released as mesh only, I…
Wydruk około 2,02 €–2,46 € nettoWstępna wycena jednego wariantu
The Thinker of Hamangia (Romanian: Gânditorul de la Hamangia ) , also known as Thinker of Cernavodă or collectively The Thinker and the Sitting Woman , is an archaeological artefact, specifically a terracotta sculpture. This ancient…
Wydruk około 7,07 €–8,64 € nettoWstępna wycena jednego wariantu
This laptop stand raises a Lenovo Thinkpad T490 laptop 95 mm. higher above the table. It provides better posture, room for a separate keyboard under your laptop and still makes the whole setup portable. Printed on a Prusa Mini+. Using…
Wydruk około 4,75 €–5,80 € nettoWstępna wycena jednego wariantu
This 130mm tall abstract sculpture captures the essence of deep thought. Inspired by classic philosophical themes, this modernized "Thinker" is a striking addition to any desk, shelf, or creative space. Designed for both single-color and…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
I wanted a way to clear some of the clutter from my desk, so I designed and printed a mount to hang my Minifuse 2 from the bottom of my Lenovo Thinkvision 27" screen.
Wydruk około 6,30 €–7,69 € nettoWstępna wycena jednego wariantu
This over-the-top coaster came out a big larger than intended (98mm opening), I suggest scaling x and y by 90-95% in the slicer, depending on your bottles. Printed with 0.15mm layer heights with a color change at 1.23 (1.2 for 0.2mm layer…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Printed mine in bulk PETG and draft mode, no need for fancy layers or support. It is possible to mount the drives with M3 screws, but I dont thinkt that is needed. Uploaded a few variants if you dont want to use openscad to change the…
Wydruk około 4,67 €–5,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Warning! Dont put eggs without schell into the egg holder. Its not good for your health.
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
This is a Piston Cup trophy I printed in silk gold PLA that is really knuckle dusters. USE FOR LEGAL USE ONLY.
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading "Think Galactically, act Planetarily" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Toilet - Thinking room - sign, easy to print
first design I've ever made, feel free to remix! If I knew how to make it better, I would. Tips are appreciated😁 Enjoy!
It's a Mewtwo sculpt I made. No supports included, you'll have to do the slicing work yourself.
Super simple redesign to work as bookend
For the uninitiated, this ornament is inspired by a sketch from the endlessly funny Tim Robinson's Netflix series, “I Think You Should Leave”. For the initiated, pretty funny show, huh? Want your Christmas tree to be sidesplittingly…
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
I'M NOT ARGUING. I'M EXPLAINING WHY I'M RIGHT.
This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…
I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
I really liked the model, but it turned out to be a render in something similar to TRELLIS, so I looked for the original
It took me a long time to perfect this model and a few tries to print it correctly. 3MF file included w/custom supports. Be careful with supports it's east to break the fingers. I recommend slim supports to make them easier to get off.…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
The Thinker by Auguste Rodin Print instructions Category: Sculptures Instructions Scan of bronze cast using 123D Catch. Post-processing by Meshmixer.
Trackpoint cap for Lenovo thinkpad keyboard. There are two types, a bulging one and a dented one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: SainSmart TPU Clear…
3D scan of a friend of mine in "The Thinker" position, on a toilette 🤔💩 The toilette was not part of the original scan. Scanned with a Xbox 360 Kinect and Skanect.
This mount was designed for M720q/M920q mini PCs, but should work for any Thinkcentre Tiny with the same form factor. The mount has a seat for the Thinkcentre's rubber feet that keep the computer in place. I have a true 1U rear support…
Remix of the "thinking room" sign with a person sitting on a throne on the other side of the door.
I designed this set of models to be replacement parts for the 1995 IBM ThinkPad 701C and 701CS laptops. The attached 3MF file is a project file created in OrcaSlicer that has everything laid out. I've also attached the STEP files as well.…
The rack mount can be printed standing on its front side without supports. There are holes on the rear side where threaded M3 inserts can be installed, enabling mounting of the retention clips with M3 screws. For more details, please…
Lenovo Thinkcentre M710t has M.2 NVME port which is on edge of motherboard so if you want to add SSD to it, you have to buy mounting kit which is piece of plastics which snaps to case and provides single screwhole for your SSD. I didn't…
using the 3d scan of the thinker statue, i used blender to the transform it to the low poly form.
My original sculpt of a pondering chimpanzee. Created in Blender. Print instructions If printing in one piece, the sculpture has to printed with supports due to overhangs. The supports then have to be carefully removed from within the…
This is a case for the ThinkNode M2 Meshtastic board. I found a full STP file on Github. It appears to be the file for their injection molded case. I imported the file into Fusion 360. I then modified some of the parts to make them 3D…
If you don't want your Lenovo Gen 2 USB-C dock lying around on your desk, you can use this holder to mount it on the underside. These brackets allow you to slide the dock in and out, holding it securely to the table while still being…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
Boom! Big reveal! I turned myself into a statue! This 3d model represents Rick Sanchez alcoholism and depression problems. I have used @Chaoscoretech Rick. I completely cut the model and did a new pose for this purpose. I think it came…
A desktop stand for Lenovo laptops. Works with Thinkpad E580 and E480 so far, with a holder for the USB-C Thinkpad dock. Holds the laptop at a 30° angle, with the base of the screen roughly 15cm above the desk. Has small recesses…
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
A small Stand for the Lenovo ThinkCentre Tiny Series. Nothing more nothing less. _(ツ)_/ Print Settings Printer: Prusa Mini+ Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: 15% Filament: Prusament PLA Gentlemans…
This laptop stand was designed for my Lenovo Thinkpad (16"), but it will fit for many other laptops as well for sure. Just check the dimensions. The Dockingstation fits perfectly under the laptop, wich makes your desk look cleaner and…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Diseño realizado por mi, echo en fusion 360, funcional y actualmente lo uso para mi notebook ThinkPad lenovo T14. Design made by me, made in fusion 360, functional and currently I use it for my ThinkPad lenovo T14 notebook.
Made a mount specific to the M900 version of the Lenovo Thinkcentre's. For some reason, this version of the mini pc had its feet rotated 90° so while existing models would have physically fit the chassis, the feet would have been in the…
We wanted a tasteful but humorous sign for our bathroom door, and Rodin’s iconic sculpture The Thinker felt like the perfect match. Since nothing similar existed, this design was created from scratch as a clean, support-free 2D print. You…
This is a 10" Rack mount for a Lenovo Thinkcentre M625q Tiny with the measurements 180x183x35mm. Should fit other PCs from Lenove as well. I used print on supports. I set the brush type to trianlge an painted on the overhangs as seen in…
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
Probably compatible with other Thinkpads
A minimalist laptop stand for holding a laptop vertically. Made for a Thinkpad but will work on others. v3 has a wider base for added stability.
Inspired by great video from the guy with Swiss accent I've bought Lenovo ThinkCenter in USFF case to be my home server. I've already have my “internet devices” mounted on a wall in my closed so I quickly designed this holder to mount the…
This is the 3.0mm variant of the Lenovo Thinkpad Trackpoint cap. I printed it in TPU. It's a bit messy (being small format TPU) and probably would have printer cleaner on a 0.20mm nozzle, but the end result works GREAT on my Lenovo P1 Gen…
Created this for the P360 Lenovo Thinkcentre desktop. Needed a mount for an addition M.2 SSD but didnt have a local seller for the Lenovo official kit. The model is designed for printing by SLA, though it can be printed via FDM. Just add…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
If you're interested in 3D scanning, I used PolyCam with photogrammetry. No need for the fancy LiDar iPhones. Original scan can be seen at https://poly.cam/capture/98333068-B95B-4118-9054-08198F21C862
Under desk mount for Thinkpad usb-c and thunderbolt docks. Leaves the power button accessible and easy to locate under a desk with the convenient design. Uses either #8 or #10 screws in countersink holes for elegant mounting. Needs…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…
English: Lenovo ThinkCentre M710q Expansion Kit" is a multifunctional expansion solution specifically designed for Lenovo ThinkCentre M710q Tiny-PCs. This kit includes a compact housing for the Tiny-PC and a PCI-E expansion card that…
The Power Button of my wife's Lenovo Thinkpad T570 was broken and get's stuck in the case. So i decided to make a replacement. I printed the button from Nylon. To Repair the Button you have to do following steps. Remove the battery…
Door sign for toilet/ bathroom
I needed a place to hang my Lenovo Thinkcentre M53 mini when using it with my old tv screen since i dont have a table nearby, so I made this one. It is printed with the open side facing the build plate w/o supports. It might fit other…
More or less as featured in Season 3 Episode 2 of “I Think You Should Leave with Tim Robinson”, its the Feed Eggs game in physical form! Sadly, no bush is included. Magnets are used to hold the creature and basket to the base, but they…
This Thinker model was made by Revopoint POP. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200…
Beautiful sculpture of a person thinking in an abstract style. The best thing about this model is it does not need supports at all! A great speed and overhangs test for your printer. Great decoration piece for your office, study, living…
ThinkPad E14 USB-C support for the docking station cable
It protects smart card readers from dust. It can also be used as a residue-free alternative to stickers for identifying laptops (when printed in different colors). It's completely flush when inserted. This way it cannot get caught…
Introducing a custom-designed 3D printable HDD caddy, model SM17A06246, precisely compatible with Lenovo ThinkSystem models ST250, ST550, SR550, SR650, and SR850. In my quest for an additional HDD caddy, I realized the scarcity of readily…
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
Mount for Lenovo ThinkPad Hybrid USB-C with USB-A Dock. You can use is for wall or underdesk mounting. There is a cutout for the powerbutton and feet of the docking station., missing is a hole for the lock.
Design is a simple “foot” that supports a laptop vertically. Print two. "It's better than balancing your laptop on its edge!" Can be printed upright or on its side, no special settings needed. There's enough of a gap between stand and…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
10 Inch Rack mount for Lenovo ThinkCentre Mxxx PCs, in 4 parts for printers with small print beds.
Needs a 30x30mm fan: https://www.aliexpress.com/item/32406690267.html?spm=a2g0o.store_pc_home.promoteWysiwyg_503227844.32406690267 The two clients i have lowered with around 15-20c
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
Vertical stand for Lenovo ThinkCentre M900 mini-PC series.
Enhance your video conferencing experience with the ThinkPad Stand, a precision-modelled stand compatible with the Lenovo ThinkPad T490s. This innovative stand elevates your ThinkPad, addressing the dreaded 'frog perspective' in virtual…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
A vertical notebook stand. Specifically designed for the Lenovo ThinkPad X1 Yoga Gen 3. The gap in the stand is 2cm wide, so it should fit any other notebook with about the same thickness (no guarantee of course). The stand is designed,…
I needed some space on my desktop, so I took advantage of ThinkPad's ability to be opened "completely". Moreover, the screen is now at a more comfortable height for my neck. As this laptop is quite heavy, I didn't want it to fall upfront,…
🗿 The Thinker 2.0 – The Modern Thinker Auguste Rodin once imagined a man meditating on the mysteries of the universe… In 2025, evolution has arrived: a bronze philosopher, seated on his porcelain throne, diving deep into the infinite…
Made in Zbrush for the Sculpting contest. My own concept, but heavily inspired by Paul Bonner's art. Besides Paul's orcs, some people find here Toadie from Gummi Bears. Which is, well, unsettling ;) This is my first attempt ever to create…
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
A simple stand for a Lenovo Thunderbolt 3 (gen 1 or 2) dock and a laptop.
Some endcaps for the ThinkPads 65W charger to wind up the cables with and keep them tidy. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: Organization
Created a simple vertical stand for my Lenovo ThinkCentre. Measurements of my ThinkCentre 179 x 183 x 34,5 mm Measurements of the vertical stand: 100 x 61 x 29 mm Measurements of the width of the middle: 35mm
“The Thinkers – Smooth & Lowpoly” Bring a touch of introspection to your space with these minimalist figures, each deep in thought. This download includes two versions of the same reflective pose: one smooth and organic, the other faceted…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Underware - Multiboard - Lenovo 90W Power Adapter holder (ThinkPad Universal USB-C Dock) 💡 💫 Recommendations PLA/PETG 0,2 mm layer no support
![[REMIX] The Thinker - Voronoi Edition](https://media.printables.com/media/prints/581337/images/4915766_6be6cd43-bbda-453a-93e2-a49e6a31ec26_9f066e78-a41d-4e51-b188-f9113a4e6977/img-1-new.jpg)
