35 modeli
I liked the look of HSW, but I've never been a big fan of mounting things on anything that can “slip out” (i.e. anything inserted). So after some more looking I found Thread Board and instantly fell for the gorgeous screws holding things…
Compatable with the real threadboards made by 3d print acadamy launched on kickstarter 0.2 layer height 3 walls 15% infill
I remixed this to be able to hang my gaming headset from my threadboard (by 3D Printer Academy).
This is simbrose's Vernier Caliper Holder, modified to add two holes for mounting onto the original ThreadBoards.
These are basic thread boards holders, of various sizes, suitable for Citadel paints. These paint bottles are 33 in diameter, so anything around there would fit. I've also made a similar set for the Duncan Rhodes Paint Academy range of…
This is a cup holder - diameter 94mm, 75mm tall. I made it for my alcohol spraybottle for my printer, but you can put a 12oz soda can in it or I put tools in them (similar to a pencil holder cup). It works with the original Thread Boards.
This version is much more stable.
A Threadboards holder for the DCF682 DeWalt Cordless Screwdriver. Printed in PLA 0.28mm layer height 4 outer walls, top, bottom and sides 20% gyroid infill
Auf dem Bild ist eine zylinderförmige Halterung zu sehen, die speziell für ein Lochrasterboard konzipiert ist. Sie besteht aus einem geraden Stift mit einem Gewinde am unteren Ende, das passgenau in die Löcher des Boards eingesetzt werden…
These are basic thread boards holders, of various sizes, suitable for Duncan Rhodes Paint Academy paints. These paint bottles are 24mm in diameter, so anything around there would fit. I've also made a similar set for the Citadel range of…
Remixed version of the french cleat wall mount. I drilled holes into the piece to line up perfectly with threadboards. I used 5 screw to hold this onto the wall and it works great! Infill - 50%
I printed it with PLA and a 0.3mm layer height as I was in a hurry. It turned out great with no supports. PETG might need supports for the holes if you print it bottom side down, or you could always print it a different orientation if you…
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers. I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit…
Printed in Overture PLA, 0.4 nozzle, 0.2 layer height, 15% infill. If you haven't printed much in the way of Threadboard stuff yet, I highly recommend printing this bottom down (as opposed to back down as it's oriented in the STL) to be…
Threadboard Bit Holder – Perfekte Ordnung für deine Bits Der Threadboard Bit Holder ist die ideale Lösung, um deine Schrauberbits übersichtlich und griffbereit aufzubewahren. Mit vier verschiedenen Größen passt er sich flexibel deinen…
A set of adapters to attach threadboards to 1010 aluminum extrusions, and to attach the 1010 extrusions to walls. Recommended print settings: PETG or PLA 3+ perimeters .4mm+ nozzle size .3mm layer height 20% gyroid infill Fasteners used:…
Threadboard AWG Spool Holder – Ordnung für Drahtspulen Der Threadboard AWG Spool Holder ist die ideale Lösung für alle, die AWG-Drahtspulen ordentlich und griffbereit aufbewahren möchten. Er ist speziell für die Verwendung mit…
You can use this on your own, or with the attachments included on this model page: https://www.printables.com/model/1357249-wolfbox-mf100-attachements-threadboard-mount. If you use this, READ BELOW: This mount requires a very specific…
Die Halterung für den Hygrostat ist speziell dafür ausgelegt, auf einem Threadboard-System mit Schraubbefestigung montiert zu werden. Sie sorgt dafür, dass der Hygrostat fest und stabil positioniert ist und sich optimal in die…
I printed in PLA at 0.2mm layer height with 4 outer layers top, bottom and perimeter. Infill was 20% gyroid. They are holding strong with no signs of fracture.
Can be printed with no supports. I used PLA, with 4 perimeters and a 0.3mm layer height. It works with a 0.2mm layer height, and you can use fewer perimeters as well. It is an easy thing to print.
This doesn't necessarily need to be used as a Cresent wrench holder, but I did specifically design it to hold the Cresent brand adjustable wrench set of 2. This can be used with any adjustable wrenches I'm sure though. The pegs stick out…
3D-Printed Threadboard Organizer for Miniature Collecting My desk was full of my printed collections. So I need some space for it. I am a fully newbie in 3D modeling, so please comment if there is any issue. This custom-designed…
I printed in PLA at a 0.2mm layer height, but I suspect it would do just fine at other layer heights as well. 15% infill and 4 perimeters as I didn't want the hanger breaking free from the back plate. Overall, it is a pretty easy thing to…
This is the flashlight this is meant for: https://a.co/d/4Aj51i1 The hardware to mount is on the https://threadboards.com/all.php page What you can use to mount: 186 Combination Mount and Hex Cap screw 12 mm.stl 177 HD8xTHR10HexDriver.stl…
Die Halterung am Threadboard-System ist passgenau für einen Bambu Lab Schaber gestaltet und wird mit zwei 3D-gedruckten Schrauben sicher befestigt. Diese Konstruktion sorgt für Stabilität, erlaubt aber gleichzeitig eine einfache Anpassung…
I liked printing this with the Creality slicer due to the way it does supports by default. However, I did also print this with Orca slicer and tree supports and it was fine, just a little added waste and time. This print is designed to…
🔧 Threadboards Fanttik Screwdriver Holder – Perfekte Halterung für deinen E-Schraubendreher Der Fanttik Screwdriver Holder wurde speziell für die sichere und griffbereite Aufbewahrung deines Fanttik E-Schraubendrehers entwickelt. Ob auf…
Threadboard Ruler – Lochabstand einfach messen Der Threadboard Ruler ist ein praktisches Werkzeug für alle, die mit Threadboards arbeiten. Er ermöglicht es, schnell und einfach den Lochabstand zu bestimmen, um sicherzustellen, dass…
A solder spool holder for threadboards. Check your spool size to be sure your spindle will fit. The diameter of the largest part of the spool is 20mm. Printed in PLA with 20% gyroid infill, 4 walls, top bottom and sides.
Show off your Amiibo in style with the Threadboard Amiibo Holder (Single & Double) Designed to seamlessly mount on any Threadboard system, this sleek, minimalist stand securely displays one or two of your favourite Amiibo figures, turning…
Supports aren't "technically" needed, but it is best to use them just to make sure the holes for the bolts don't get deformed. There are two models. Both models have what is called an Alignment tab. You can touch the front of the…
I like the bolt pattern of Threadboard and already printed a lot of stuff compatible to it. As now I want some thing more filament saver and Honeycomb is a good option, but I do not like the fit of its accessoties only with pressure. With…
I made these to allow me to use Threadboard attachments easily, (the threaded holes are . http://threadboards.com The threaded holes are 10mm deep. There are various depth sized on Threadboards, so make sure you select the correct size…
Supports aren't "technically" needed, but it is best to use them just to make sure the holes for the bolts don't get deformed. There are two models. Both models have what is called an Alignment tab. You can touch the front of the…
