Wyniki wyszukiwania: ting

Rotating Rings Toy

This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation. :) If you are not able to get the rings rotating freely, you can use the "looser-tolerances" version. If needed I can upload outer…

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

How to print the Mandalorian helmet -> size S, M, L and 3D print settings

Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…

#3DBenchy – The jolly 3D printing torture-test by creativetools.se

As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…

Happy chunky bum sitting pot

This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…

Flexi Guardian - Rotating Head Remix (Zelda Breath of the Wild)

This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…

Floating Rubber Duck

I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…

BEN the floating BENCHMARK (Benchy)

So I love how many of us love the original benchy. The only thing I've always found a little pity it can't swim. Since I have drawn a few ships so far, I just wanted to try to draw a small, floating benchmark boat. Of course, it's not…

Interlocking Sorting Cups (Hex Shape) - Version 2

What is this [ Update 3: Added variants without interlocks after a specific user request.] [ Update 2: Added a larger triple hex cup after a user suggested it. Check the file section.] [ Update 1: Added two variants with greater wall…

'Gem rock' mount for your articulating dragon

Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports. There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and…

Mini Bit Tool V2 - Variable bit fitting

Intro This is a mini bit holder with perfect grip! Try it! You will love it! Now in Version V2: A better variable bit fitting that makes sure every bit will fit. Why you'll love it? Variable bit fitting Suitable for all HEX bits Print is…

"Floating" tensegrity table with built in tensioning mechanism

A structure that uses opposing tensioned strings to remain stable. A neat toy/display stand/demonstration piece/conversation starter that is a kind of optical illusion. UPDATE: I have changed the model's version to 2.0. I made some simple…

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Multifunction Arm mounting system Spinning Adapter

360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…

AirManagerV2 recirculating air filter for 3d printing enclosure

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…

Ratcheting Toothpaste Winder (remix)

The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…

Temp Tower PLA Prusa Mini Starting high to low temp

Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…

T-Rex Chicken Arms modified for easier printing.

T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…

Ikea Skadis top mounting shelf

Looking for additional storage space and ways to extend the use of the Ikea Skadis organizer? This shelf mounts on top of the Ikea Skadis board and adds 190x 80mm of storage space without loosing the use of the upper holes. 4 shelfs will…

QuBenchy - 3D Printing Torture Test Cube

With the surge of more advanced and affordable 3D printers, any cheap, average machine can now poop a decent 3D Benchy . That defeats the very purpose of the benchmark, and calls for a new one that can stress the printers again. Also, 3D…

Ghostface Chibi – Cute Horror Icon for 3D Printing

🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…

Low Poly Sitting Fox

MashLab makes it possible! Print instructions Category: Animals Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1mm Infill: 35%

3D Printing Nozzle Sculpture

I have made an extruding nozzle sculpture/trophy/award. There are three pieces to this model: The base, which has no special printing recommendations. The extrusion pile, which should be printed with supports on overhangs greater than 70°…

XXXS Bit Tool V2 - Variable bit fitting

Intro A tiny but incredibly handy bit driver designed to go everywhere with you. This latest V2 update improves grip and usability while keeping the tool ultra-compact . Whether you’re fixing small gadgets, tightening electronics, or just…

Christmas decoration with traditional mounting

Simple Vase Mode Christmas decoration with traditional mounting hole. Take the mounting wire and cap of an old or broken Christmas ball and insert it in the cylinder. Available for 8mm, 10mm, 12mm and 16mm mounting cylinder. I used 8mm.…

Hook for heating ladder

Háček na radiátor do koupelny. Nutné tisknout z PET_G kvůli teplotě radiátoru Udrží i velkou mokrou osušku

Print-In-Place ratcheting screwdriver

So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…

Updated 220811 Ultimate All-in-One Temperature and bridging Tower (Auto Temp Setting)

Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…

sitting kodama mix

made some kodamas. they probably need a bit of support, at least for the arms. but i dunno. the picture only shows #0 and #2

Painting Station

Organize the workspace for painting models. Utilize the maximum surface area of a Prusa XL with this painting station that measures 360x360mm. The station holds 17 cans of Vallejo paint, 17 ml/0.57 fl oz (diameter ~25 mm). In addition,…

testing boobs cube

Rotating Dice

This was totally based on these nice and well machined rotating dice: To make one, you'll need: 4 small bearings (3x10x4 mm) lke these ones: https://www.amazon.com/Fishing-Shielded-Miniature-Bearings-VXB/dp/B002BBF59C (Not sponsorship) 14…

Simple floating boat - spiral vase mode

Sad fact: Benchy doesn't float , but I have 10 of them and my daughter wanted to play with one in a bath. So I quickly designed one very simple floating boat. It floats great and it can carry smaller toys too, including a Benchy :-) In…

floating boat (cant sink!)

This floating boat model is optimized for efficient 3D printing, balancing structural durability with lightweight design. The project consists of a single sliced file engineered to print in approximately 3 hours and 28 minutes. Designed…

Knitting Stitch Marker - “field-tested”, “knitter-approved”

Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…

Interlockable Sorting Cups (now with Lids)

[ Update 2: I redesigned the cups to make them stackable. You can find version 2 here . Version 1 will stay online in case anybody wants to keep using them.] [ Update 1: Added a snap lid and cups in two more sizes. See below for details.]…

Grow Tent Pole Clamps For Wire Organization, GoPro Mounting, and More! ***Updated With 16mm & 22mm Clamps***

***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…

Unifi AP AC-LR mounting bracket

Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…

Stable floating Benchy with Cargo, Smoke and Flag (Multicolor Version)

Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…

Heating System for VW T6.1 California Ocean

So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…

Pumpkinface Chibi – Cute Horror Icon for 3D Printing

🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7543982571361815830 ℹ Discription: This chibi-style Pumpkinface figure was custom-designed to blend playful proportions…

Rotating Hose Cuff

Preface I bought a Shop-Vac and Cyclone Dust separator a while ago; The Vacuum came with a 40mm hose, which is just not the best choice for a semi-static dust collector installation. I ordered a 60mm hose and had to solve the problem of…

Meditating Yoda

Meditating Yoda

Puzzle Sorting Trays

My wife and I enjoy building puzzles and our first step is always sorting the pieces. These trays print quickly at .3mm layer height with a .4mm nozzle. They puzzle fit together and stack for easy storage and transport of pieces. If you…

Desk lamp with an orbital design, mood lighting, and bridge structure

Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…

Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]

This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…

Rotating globe lamp stand with BBs-based bearing for smooth rotation ability

Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…

Painting supports or painting stands

Painting supports for placing freshly painted objects. The triangular supports with a ball tip can be safely placed under freshly painted objects to minimize contact. The triangular base shape helps them to remain stable even on uneven…

Anti-Wobble Z axis bracket with Floating Driveshaft Bearing

Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…

Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow for Prusa Mini

Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…

Splicing tool 1,75mm + 2,85mm - filament welding - filament connecting --> You will never have last meters again!!!

Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…

Worlds Lightest 1gm Functional Ring Counter. (Vase Mode/Spiral print) , A Must have! knitting counter

Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…

The original Retractable Purge Mechanism, for MultiColor 3D printing, Replaces purge blocks & wipe towers

Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…

Hunting slingshot

Slingshot that also works for hunting. No supports needed PETG

Sven the Articulating Flame Dragon - Single Extruder

This is a single extruder variant of my second articulating dragon design, the dual colour version is also pictured above. It includes a few improvements over My original dragon ( Rupee the Articulated Dragon ) including improved…

Easy to print Tank keychain - Tiger 1, Centurion (with rotating tower)

Two tanks with a hole for a keychain Centurion has a rotating tower Print in place few supports needed scaleable 25-40min print time, PLA, layer height 0.3mm

Google Nest video Doorbell Mounting Bracket - battery & wired

Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189

TP-Link TL-SG108 8port switch mounting bracket

Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.

DeWalt Tstak Basemounting

Fix all the part like the plan in PDF with M4 x 25mm wood screws, I put mine on 388mm x 290mm x 20mm wood bord.

LED Light Remote Holder: Organize Your Lighting Controls with Ease

LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Nerf Rotating Target

This is a Nerf target that rotates or "crawls" each time you hit the top bullseye. My ten-year-old son was looking for Nerf targets and couldn't find any that he liked, so he made his own. This is the first 3D image he's ever made. To…

Rotating Hanger for Ties, Belts, Necklaces, etc

Needed a space-efficient way to organize my ties and belts, so I designed this after seeing something similar being marketed in an online search. The hanger has a carousel that can be rotated to make it easy to consider what kind of…

Fpv Drone piloting sticks for ps5 controller

Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y

Miniature Sitting Woman/Reader II for your Diorama

Miniature woman/reader for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as…

PSU Mounting Bracket - LACK Enclosure

PSU Mounting for LACK Table Enclosure. Simple design that allows the PSU can mount on the upper tbale of the LACK Enclosure. This means it can sit on a desktop without the lower table.

Fast printing screw-top desiccant container (old version 1)

I've released a new, improved version of this container. Check it out here . Note: this model MUST BE PRINTED IN VASE MODE . If you print it in normal mode, you're just going to get a solid cylinder. This is a desiccant container designed…

toothbrush cup with evaporating bottom

toothbrush cup with movable evaporating bottom; protects the brushes from standing in water and blackening; holds 5 toothbrushes and two toothpastes comfortably, buttom square 6 x 6 cm, upper square 7 x 7 cm, height 10 cm;

SSD M.2 Hard Drive Mounting Support Bracket for Dell G15 5510 5511 5515

M.2 SSD mounting plate for DELL laptops.

Nativity Cut: Young Contemplating Girl

Young Contemplating Girl. I have a few models that I worked on for the nativity set that dont quite fit in. I realized when I added the other models to the plate for size comparisons that the style was just way to different to fit. Enjoy.

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

Miniature Sitting Woman/Reader for your Diorama

Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as a tourist. Printable for the most common scales (with girl height 175 cm): 1/12…

Plate mounting bracket for 7" touchscreen case

Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…

Multifunction Arm mounting system Cable Clip

Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables

Wind Powered Lighthouse with Savonius Turbine – Rotating LED Tea Light Effect

Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…

Levitating pegboard containers

2 Boxes models: 1 open and another one divided into 5 trays to be easy to grab little things with only 1 finger. 15% Infill, 0,4mm nozzle, 4 walls, no support needed. Print your own efficient common tools' toolbox for your pegboard wall.…

Surfcasting rod support / suporte de cana

For 30x30x2mm aluminum corner profile

Prusa MK3S MK3S+ Speed profile + Best Supports settings Combo

Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…

Raspberry Pi 4 Mounting Bracket for Prusa MK3S

My goal was to make a mounting bracket for the Raspberry Pi 4 that fastens to an MK3S which would look like an OEM part / accessory for the printer. My Pi 4 has an aluminum Pimoroni heatsink case as I liked the idea of the case being a…

Shooting-Patch-Dispenser

I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…

Silencer 1/2 UNF fitting.

Silencer 1/2 UNF fitting. For .177 and .22 air pistol/rifle. 100% effective and tested for durabillity. Assemble in the following order: UNF fitting, long bell and collar, short bell and collar X5, end cap. You only need to glue the UNF…

No MMU Babysitting! (NoMBa)

TL;DR Goal Achieve impeccable MMU2s reliability: printing of 5 color MMUTT (1000 tool changes) without a single user intervention. Hardware modifications Extruder wider filament path inside the extruder above and below the bondtech gears…

Samla DryBox PC4-M10 PTFE fitting passthrough

Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…

Tufting Carpet Clipper

A 3D model for carpet trimming: a guiding tool that helps you achieve even trims effortlessly. The model can be printed in separate parts (floor and handle), which can be aligned and glued together. Alternatively, you can print it as a…

Floating Submarine

Made on my ender 3. The wall thickness and infill is critical to make this model (D) float correctly at the water line. I used a 0.4 mm nozzle, 0.2mm layer height, 1.5mm walls, and 15% infill. Tree supports work well. A solid version of…

Impossible Twisting Hex Fidget (No Supports Required)

Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.4mm between objects - will not scale down well Print…

Painting workshop for my Warhammer soldiers

There is not much to say. I believe that the photos are self explanatory I printed with PETG but PLA would work too My son is named Felix. Please replace the name by yours or anything else as needed

Convoluted Kinematic Coin-Sorting Contraption

Update 11/8/2022: Added STL versions of all the part files (previously I only uploaded 3mf and gcode files). This is a coin sorter that uses the weight and size of the different types of US coins to sort them into four columns – 1, 5, 10,…

PRUSA Sorting Tower MK2 - VaseMode

This is an upgraded version of my previous design, which now includes a more steady base, an "open layer" addition and a print-in-place top with handle. The tower is meant as a method of recycling Prusament spools, but can also be made by…

Penrose Infill Tiles - Infinite Non-Repeating Tessellation

Penrose Tiles are named for their creator, Roger Penrose, a mathematician and physicist. The Penrose Tiling is an infinite aperiodic tiling, meaning the pattern can be tiled over the entire plane (to infinity) but never repeats the exact…

Multiboard connector for a regular screw mounting point

Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…

TP Link TL-SG105 Mounting Plate

This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…

Dart Vader OILpaint "Filament Painting"

🖼 Dart Vader Oilpaint Art by AI .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA…

MMU3 printing with TPU/Flexibles - Parts and Settings

Disclaimer: Please don't expect this to be a “download-and-drop-in” modification that immediately works. Getting TPU/Flexibles to work reliably during a true multi-material print is tricky and will required understanding of your machine!…

Eureka mignon knob sleeve - Grind Setting Dial V2.0

A remix of the "Uni knob" from @ordnerino that makes it possible to use the Grind Setting Dial with the original knob

Eat sleep 3D-print repeat coaster for printing-nerds

This coaster is a perfect choice for every 3D printing nerd. It's easy and fast to print. Feel free to share your own experiences with the community. Design by Jaroslaw Krawczyk found on MyMiniFactory:…

Gym PowerLifting Trophy

Hey, I made trophy for powerlifting competition. There is three types of trophy with small/medium/huge biceps. On screenshot i scaled that model to 150%. Needs support for arms as you can see. Enjoy printing! Mig

Musicman stingray bass thumb rest

30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.

Tricky Kittens Enlarged and split to three, fitting Prusa Mini+ print bed

Remixed this lovely décor so it could fit into Prusa mini. Please note that the gcode files are enlarged by 15% compared to the supplied stl files. They are the largest possible print size fitting Prusa mini print bed.

Diamond painting pen tip for 3 beads

Printed with PLA on default 0.2 with brim.