Liczymy pasujące modele…
Simple wall mount for the EMax Tinyhawk 3 and Tinyhawk Freestyle 2. Easy and quick print. Hangs the drones on the wall with a single screw. We printed in PETG because my son liked the color :)
I designed some protectors for my new Tinyhawk 2 Freestyle that don't need you to remove the motors/screws. Printed in TPU they just snap over the arm and fit tight. Printed with support at 0.25mm layer height with a 0.4mm nozzle. I…
21/03/20 - Added Camera mount v2 My Drone flies perfectly like the one that I bought originally. Now it has XM+, 400mW and great vision. That modifications adds weight so now it is about 70g instead of 50g, but on 2S it still flies great.…
This is a fairly simple stand for the Emax Tint hawk II drone, I Printed it in PETG I recommend using tree supports for the print as there are lots of overhangs.
A mount for the Runcam Thumb on the EMAX Tinyhawk II The bottem can you use in TPU or PLA, the top only in TPU
Top-mount battery case for the EMAX Tinyhawk 2 Freestyle, remixed from Takumi13's design. I included two cutouts to make room for the stock camera mount, and made some alterations with a different printing orientation in mind. Also…
This model was designed to fit well with two 1S 720mAh batteries from GN3. I have used it with smaller batteries and have found that it prevents front ejection just as well. The print pictured was done in Prusa EasyABS with a 0.6mm…
Modified version of 'Tinyhawk Freestyle II - All Parts' by ClintCollins . The top and bottom battery holder have been split off from the rest of the parts and given taller walls. There is also a top battery holder that has a larger hole…
Just a simple Tinyhawk II Freestyle battery tray. I designed it specifically to fit 2S packs, specifically the Tatu 450mAh 2S 95C packs, which are cheap, and perform well. This should stop batteries from being ejected forward during a…
For PLA Prints (if you dont have TPU) TPU is better (flexible), but if you only have PLA, use this model. I had many struggles with the original models (because I used PLA and not TPU lol) and had to cut some things afterwards. This model…
Battery box for Tinyhawk 2 Freestyle with XT30 connector holder for 2s batteries. Recommended to print with TPU.
After installing the EMAX TinyHawk & TinyHawk II FreeStyle VTX/RX Sled I didn't find an easier way to mount the XM+ Ante
This frame and cover are used to retrofit the Tinyhawk II (TinyWhoop) for outside fun. It is a bit heavier but can handle 2s batteries. The frame comes in at about 6.7g. It could be made thinner because it's quite robust right now. Might…
These arm guards are soft and hollow to absorb more impact energy. I made these after installing a Walksnail 1s VTX which happens to be very sensitive to bumps. The set of 4 weighs 3,5g. For a standard Tinyhawk analog build the lighter…
3 walls high infill i used 40% support: yes i used raft but i dont think its nessery if you have well tuned printer pla/petg petg better for longer life span or even abs if you have inclosed printer i used petg. use the the extra screws…
The custom color looks cool too :) Printed in TPU 0.12mm Layer Im using M1.7*5 screws to screw in. Just one screw from the bottom to mount.
I got a tinyhawk cheap, i can not get it to bind, so i wanna put a crazybee board in it that i have here...... so here we are :) https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left…
A mount for the Runcam Thumb on the EMAX Tinyhawk II
stop that sloppy camera! Category: R/C Vehicles
Tinyhawk Freestyle II arm guard no support required press fit duplicate and mirror to make set of 4.
Version printed in fiberlogy fiberflex 40d is jello-free using runcam split 3 lite, of course by cost of durability. Category: R/C Vehicles
Please like the upload if you enjoy it! Your support helps me upload more awesome designs! This is a lightweight (1 gram) but wider battery holder for the Emax Tinyhawk II Freestyle. It’s perfect for larger batteries like the GNB 650mAh…
Remixed ( https://www.thingiverse.com/thing:4117499 ) to fit the Tinyhawk Freestyle 2. The hole in the back is big enough to fit 2 1s connectors through. If you want a version without the text just let me know. Printed this in PLA without…
Demat, Voici un print afin de ranger et sécuriser tout l'intérieur de la pochette livrée avec le TinyHawk II. Vous pourrez y ranger le chargeur USB d'origine, 6 lipos 1S format baton. la lipo 2S d'origine, le petit outillage d'origine…
I use one end of an sma pigtail cable as the base for the vtx antenna to replace the stock antenna. I used deans because its all I had access too.
I was not very impressed with the stock camera or the way it was mounted on my Emax Tinyhawk 2. So I decided to replace it with a Caddx Baby Ratel Nano. But that camera did not fit the stock camera mount at all. Printed in Filaflex 82A,…
A simple rear mount for a vtx antenna too keep it away from the props.
A simple wall mount I made for my Tinyhawk. Print it horizontally flat on the back. Use organic/tree supports. They are easier to remove in this case. Any filament will do. PLA is perfect for this. To attach it to the wall or furniture…
私が、フリスタに目覚めたきっかけになった機体(Tinyhawkfreestyle)を3Dプリンターで3インチ化して復活させました✨ ※汎用性をあげるために、AIOのFCと4穴固定のモーター仕様に変更しています #tinyhawkfreestyle #3dプリンター
The original storage case in which Emax TinyHawk is shipped has soft foam inside which is not ideal for transportation. If you place something heavy on top of it it, or it gets manhandled at the airports, Your TinyHawk many not arrive…
Do you have an old tinyhawk 2 that is not flying. Rebuild it to a Fractal75 and fly again. With some nice 0802 motors of whatever you want. Total weight 26 grams.
Another Tinyhawk II Freestyle Battery Tray which fits better for me.
Lightweight arm guards for Tinyhawk 2 Freestyle for impact protection. The set weights 2,15 grams in total. Print in TPU with orientation like in the picture. No supports. For a full set print 2 pieces of each file.
Here 's my Onhape document. There's a version with and without the antenna mount.
Remixed the Runcam nano 2 mount to fit the Foxeer Predator 4 nano on the Tinyhawk Freestyle for a friend. The Foxeer camera is 3mm longer than the Runcam. I will add a picture of the result if my friend send me one. ;-) 31/1/2020 Added a…
Slicer: PrusaSlicer-2.4 Settings Perimeters: 4 Solid layers Top: 5 Bottom:5 Support Overhang threshold: 89° Support on build plate only: Yes Filament Fiberlogy FiberFlex 40D Category: R/C Vehicles
Tinyhawk II Race storage container. Fits into original Emax box, minus foam. Printed out of PETG with 10% infil. Provides extra protection if your container gets squashed in your back pack,. Category: R/C Vehicles
This is just a small tray to neatly organize a FrSky XM+ / Jumper R1F and a Eachine nanoVTx, which greatly increase range and video quality. Weighs in at around 1.5g, while both components are friction fit they might come loose in harder…
I created this model so that the camera on the Tinyhawk 3 Plus Freestyle will be fixed at exactly 20 degrees above the horizon, because the stock camera mounts get jostled during crashes, and setting exact angles on them proved difficult.…
