37 modeli
Links Tipper trolley <== you are here Flat trolley with pegs Flat top Box top Can mount Turntable trolley Fork Description This is an upscaled version of Evgeniy's Tipper Wagon for use on G gauge (LGB/Bachmann/Playmobil/…) track, with a…
These are tippers used by the Lime Rock Railroad made in HOn30. They use MicroTrains length axle wheels and a .020" piece of wire between the journals. Category: Hobby
Use with any laundry soap jug that has a pour spout to keep the soap at the spout end all the time.
Edit: 19-Aug: improved Version (V3): “squareNut”-Versions for “squareNuts” “hexNut"-Versions for "hexNuts” -→ use 0.22mm for first layer. Indent for 9mm blade is only 0.2mm in V3! Edit: 18-Aug: “squareNut”-Versions for “squareNuts”…
A small tipper truck, with an articulated tipper. The design includes two different wheel models, and you can combine the colors of the parts as you like. Must be printed with suports.
Fixed the 5 problems with the original design: One of the pivot holders on the base had a hollow hole in it. Non-manifold areas in the model. Raised the fulcrum so that the tip tube is up at the entrance (more tipping action). Curved the…
Simple replacement tipper element for the metal Märklin 4513 Wagon. Printed with supports, best way I found was upside down so the marks are inside. If not printed in high resolution, the axle elements require some filing. Complete…
Complete more advanced challenges with the Micromelon Digger attachment. Powered by 2 small 9g servos connected to the Rover's servo connectors. You will need 1x Micromelon Rover 1x 9g metal or plastic gear servo motors (with included…
Edit 07-Aug-2025 : Bottom Nut renewed, needed to be mirrored. After two good solutions I have now the best solution ever. Contrary to my first trials with two cutter blades I have doubled the blades now. It is four instead of two. This…
Having spent the time and patience to build a fine functional model it offers some protection to the supplied box. The liner is designed in 2 section in order to fi the print bed and easily fit the model. Printed vertically the design…
This is an updated version of a laundry jug tipper I originally designed in Tinkercad years ago. This version is larger and now defaults to using a Tri-hexagon infill for better weight support.
This is a remix of the v3 filament tipper for the MMU. I took the v3 design, added square nuts, and added the magnets back in since I found it hard to place the blades while assembling. To make this filament tipper, you will need the…
Spinning top with a chamfered blade
Missing the tipper dump plate for your Rokenbok Action Factory? Look no further!
An O9 gauge tipper wagon for 15" to 18" gauge railways.
A version 1 of a kettle tipper. (Work in progress)
Improved the model of the trolley. Axles for wheels with a diameter of 3 mm were printed with a 0.4 nozzle, a layer of 0
The other day I was feverishly finishing up some work on a project when, as I reached for a brush, my hand swept across the table and tipped over an open bottle of Nuln Oil... A couple of things: 1) try to keep your paint pot lids closed.…
Do you have a Rokenbok Action Factory missing the plate that holds the tipper? Here is the part for you!
You need to print both. Only compatible if you made your Learningtower out of TENHULT. NOT COMPATIBLE WITH BEKVÄM!!
Basic kettle tipper parts. Made of one base plate, two base sides, one tipper base, one 90 degree stopper, one 45 degree stopper, and one 30 degree stopper.
I woke up from a fever dream only to wonder, "Is there anyway to exceed the brilliance of my previously published single Paint Pot Holding Anti-Tipper Over...Device(s)?" I then saw a blinding flash of light and realized,"Indeed I could…
The board game Tipperary (published by Lookout Games) is a fun tile-laying game. Unfortunately, it features some pretty flimsy cardboard castles (with puzzle-piece assembly). So, I created this replacement castle in a Norman architectural…
Ersatztürme und Ersatzteile für das Brettspiel / Legespiel Tipperary von Lookout Games. Tipperary ist ein sehr schönes, nicht so schwieriges Legespiel für 2-5 Personen. Das einzige, was mich (und andere) daran stören, sind die aus Karton…
An hanger for a wire stipper on honeycomb storage wall hsw
Mouse Trap Tipper for narrower places Only 120mm wide. After tipping it automatically resets for any more mice, so long as there is bate to attract them. Counterweight 3D printed at 100% infill to add weight
This is a two part model prototype that can also be scaled if needed to be bigger. This is a two-part model prototype consists of a stable base and a pivoting mechanism designed for securely holding and tilting the kettle. Both parts…
This device consists of 5 different 3d printed parts that can be put together to create a functional kettle-tipping device. There are 2 supports that hold the base and the connection securely in the middle and a handle that put on a rod…
Well, in the same grain as the rest of my mods, this tipper mod for the 6x6 follows the thought process "I love the 6x6 Mogster, but I wish it could dump like the 4x4". And so, it can! Fitted with the same 3 day dumping system as the…
This design is for people with a hand condition to be able to pour their tea or drink out of their Kettler easily,
Printed faced down (auto orient) Prints with supports as there is a small overhang. Small overhang, may not be needed for function, but may improve strength sligthly.
Tips guard for mogster models 20 and 21, designed to accommodate 1/3W LED lights with reflectors. The front lens comes from…
Hlava čepu 10x10mm, střed 7,5x7,5 mm, nejmeší část 3,5x3,5 a last segment 7,8x7,8. celková délka 260mm Pin head: 10x10mm, center part 7,5x7,5, cap 3,5x3,5, cap 7,8x7,8, total lenght 260mm PLA works well 0,25 mm DRAFT 40% infill supports…
Has this ever happened to you? Your workspace is cluttered with pens, markers and pencils and you have not place to put a cup of your favorite beverage. Then there's the risk of spilling your favorite beverage and making a mess! Worry no…
Links Tipper trolley <== you are here Flat trolley with pegs Flat top Box top Can mount Turntable trolley Fork Description This is an upscaled version of Evgeniy's Tipper Wagon for use on G gauge (LGB/Bachmann/Playmobil/…) track, with a…
Hlava čepu 10x10mm, střed 7,5x7,5 mm, nejmeší část 3,5x3,5 a last segment 7,8x7,8. celková délka 260mm Pin head: 10x10mm, center part 7,5x7,5, cap 3,5x3,5, cap 7,8x7,8, total lenght 260mm PLA works well 0,25 mm DRAFT 40% infill supports…
Tips guard for mogster models 20 and 21, designed to accommodate 1/3W LED lights with reflectors. The front lens comes from…
