5599 modeli
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Reduced size, edited for better fit in. Remixed from: https://www.thingiverse.com/thing:4569222
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Small and robust travel case for Oral-B electrical toothbrushes. It's a one-print-design with joints that rotate freely, yet without wobbling and the small clip makes sure that the case doesn't open accidentally. To be on the safe side…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
A 3D Printed Toothbrush and Toothpaste Holder. This holder offers a stylish and convenient solution to store and display your oral care essentials in an elegant manner. Designed with both functionality and aesthetics in mind, this holder…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
PLA, with support (maybe PETG) Best to print with a 0.6 mm nozzle (time savings). Stick to the tiles using double-sided tape.
Wydruk około 5,23 €–6,40 € nettoWstępna wycena jednego wariantu
Update 03.02.2023 Added additional model, “rugged”. This one has thicker walls and an improved snap lock. It uses a little bit more material to print compared to the original model. Both models are available for download. Description…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Oral-B Toothbrush Holder This one is a more simple version from the once you can find. I did not wanted to have a big piece where you could store more than just the toothbrushes. Therefore, I designed a slim-version. Enjoy.
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
Reworked the German plug version of this Oral B toothbrush charger holder to accommodate the US plug model. The extra length of wire can be tucked into the bottom cavity for that sleek look. The plug holder has small tabs to retain the…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello everyone I just wanted to design an easy toothbrush and toothpaste holder for 2 toothbrushes and an toothpaste. So just print it out, have fun and start your new day with a smile;-) I would recommend to print with support
Wydruk około 7,01 €–8,57 € nettoWstępna wycena jednego wariantu
Use strong double-sided adhesive tape to stick it on the wall
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Wydruk około 8,09 €–9,88 € nettoWstępna wycena jednego wariantu
Holder/stand for 3 Oral-B iO toothbrush heads.
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Replacement toothpick for the small Swiss Army Knife. The g-code file is .05mm Ultra-detail for the Prusa Mini + in PLA and takes about 7 min to print. In the Cover Photo, the green one furthest away is the print. The white/yellowish one…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Toothbrush Stand with nice teeth
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit two toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print-in-place remix of Toothbrush Travel Case by James Printed at 0.2 mm with default settings on PrusaSlicer. The hinge may be a little stiff at first - just open and close it a few times to loosen it up. Update: Added v2 files with a…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
So this is a remix of https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit made by https://www.printables.com/social/242064-ruben-martins/about I love things that fit in Altoids Tins. I made it so it fits in an…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
vytlačte ze zubní pasty vše
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
So I was shopping for toothpicks and there I was, looking at the options, toothpicks with a holder and toothpicks without a holder. And I thought to myself, “I can make a holder myself”, so I brought the ones without a holder and started…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
toothbrush cup with movable evaporating bottom; protects the brushes from standing in water and blackening; holds 5 toothbrushes and two toothpastes comfortably, buttom square 6 x 6 cm, upper square 7 x 7 cm, height 10 cm;
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
A simple and easy to print toothpick box. If you like this file or need some adjustments feel free to leave a comment and may check out my other designs on my profile. Happy printing! Print instructions Print the lid upside down. No…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
Box designed to hold toothpicks with and without individual plastic casing. Easy access: you can shake out couple toothpicks through hole in lid. I also include a plain box without pattern and lid without hole. Build instructions Print in…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Oral-b toothbrush charger wall mount The technical drawing is the dimensions for the double sided tape I use to hang it on the wall Toothpaste tube holder Print instructions 3 perimeters 15% infill
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Great toothbrush holder for kids and grown-ups alike. Or perhaps a great gift for your dentist friends for their office. For this remix, I've added 4 angled holes large enough to fit good sized brushes and a drain system. Also added…
Wydruk około 11,30 €–13,81 € nettoWstępna wycena jednego wariantu
This model was inspired by my mother who asked me to design her a toothbrush holder. I ended up using it for myself instead. Parts For assembly you will need: printed parts 4 x rubber feet of your choice with a max diameter of 9mm For…
Wydruk około 8,06 €–9,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This screw together case keeps your toothbrush clean and safe while traveling. It needs to be printed in spiral vase mode. Since it is in vase mode, you need to print each part separately. I used a 0.6 mm nozzle with 1 mm external…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Please like and follow and post your makes. Use care. This looks like a knife but there is no sharp edge. The tip can poke so not for small kids. Use in the home. I made this goofy KA-BAR knife toy, but I like practical prints. So I…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . NOTE: TOP PART should be printed with ZERO top and bottom layers, pattern infill of your preference at 15-50%. You could also rotate the piece so the pattern changes. (0.25mm clearence) Nozzle:…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Toothbrush holder multicolor
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Kleiner Wackelzahn. Beispiele wurden aus PLA gedruckt. Viel Spaß damit, ünber ein Like würde ich mich freuen.
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
This is a toothpick holder has a screw-on bottom for refills and a plug on the top that slides back to allow the toothpicks to be shaken out easily and quickly. The access hole is on the edge of the cylinder so you can more easily get out…
Wydruk około 2,17 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…
Wydruk około 2,97 €–3,64 € nettoWstępna wycena jednego wariantu
Toothbrush holder for five toothbrushes. Hole diameter: 17 mm Print without supports
Wydruk około 6,65 €–8,13 € nettoWstępna wycena jednego wariantu
This model is a quick adaptation of the original model to fit two instead of four brush heads to fit my needs. The model printed well without supports on my Prusa Mini with PLA filament.
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
I printed the holder in the SLA printer due to better surface finish. It certainly also works in the FDM process. Maybe you can turn on ironing in the slicer to seal the surface so it's easier to clean.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Traveling case with aeration holes and a sliding lid for Oral-B electric toothbrush with 2 heads
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
Just a silly remix of the popular Julius Caesar Bust . I've included the versions with and without supports. Update: 2/27/22 - Added 12mm and 22mm versions to accommodate smaller and larger toothbrushes Update: 3/1/22 - By popular demand…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed the Philips Sonicare Toothbrush Travel Case by Ohuf but the cap was too loose and it wouldn't stay in place. After printing a few variations of the cap that just wouldn't fit right, I decided to create a model in OpenSCAD. I…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
I found myself needing a new home for my toothbrushes and the space I had going spare was a bit skinny and without a ton of room for something low and wide. So I designed this little toothbrush holder cup with a drain in the bottom and…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
This is a complete set of inproved interdental toothbrush handles compatible with Curaprox brush bits. The set consist of: basic Torus handle, with a lid Angle handle for reaching back teeth, with a lid a Deck for organizing brushes, with…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smart holder for your electric toothbrush with penguin on it! You will need two screws for application on the wall.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Prints well, no supports. The letters for me come out great, I don't use ironing. It's small enough of a print to be able to mess around with settings I'd say. Can check the original creators for more information. The cross comes out…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
A gridfinity charger for your Sonicare Toothbrush.
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can find the BT5.0 Audio Pro card on the internet. It is 36x38 mm and has an amazing lot of possibilities. I paid € 4,25 for it. As I needed to connect my new jackless phone to the old audio system in the workshop, I only wanted the…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
A shelf for storing toothbrushes. Dimensions of the shelf (LxWxH) 220mm x 60mm x 100mm Height for doble-sided tape 25mm Material PETG or Any Support Yes, organic (recommended) Mounting: Add pieces of 20mm double-sided tape ( 3M tape…
Wydruk około 10,71 €–13,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is holder for 5 pieces of TePe Angle Interdental Brushes, 10 pieces TePe Interdental Brushes and 4 pieces teeth brushes. NO SUPPORTS NEEDED!!!
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
This is a holder for five pieces of the TePe Angle Interdental Brushes. NO SUPPORTS NEEDED!!!
Wydruk około 2,02 €–2,46 € nettoWstępna wycena jednego wariantu
Makeup Brush + Toothbrush Holder Gyroid + Cubic Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Have fun! Makeuppinsel + Zahnbürstenhalter Gyroid + Kubisch…
Wydruk około 5,72 €–6,99 € nettoWstępna wycena jednego wariantu
Leatherman ARC mod that adds the capability to carry original Victorinox toothpick (or tweezers) and pin. You can use the original torx screws that came with your ARC to secure the mod. The pin and toothpick can be bought separately on…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Remixed the Family Toothbrush Holder by djedje_zr7 for 2 people, added legs and holes to drain water properly. No supports needed. Lid and body have to glued together.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
My kids are always struggling to get the toothpaste cap off (usually because they are messy and have a ton of dried toothpaste on it!) So, I decided to make a toothpaste cap that is easier to get on and off. They've only been using it for…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
An elegant toothbrush stand for 3 toothbrushes of model Oral B. The hole where the toothbrush is placed is 28mm in diameter so the toothbrush can't be larger than that. This is just a stand and has nothing to do with charging the…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A toothpaste squeezer that works great. I designed it to work with Colgate but it will work with others. Buy me a coffee! https://www.buymeacoffee.com/MK4EXPERT
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
The toothbrush holds firmly, while it's still easy to take it out and put it back in. Use double-sided adhesive tape to fix the stand to any flat surface.
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple efficient electric toothbrush head holder. You can stack up to 3 heads, perfect for you and your family. How I Designed This Design Features The top section is slightly curved and the head insert are narrowing in, so the head can't…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
This is a case for a Wifi & GPS device meant for Celestron telescope mounts at have available AUX ports. It combines the features of a few commercially available dongles into one device. The full project discussion can be found at…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you T oothpicks, canapés, party . Suitable for skewering canapés. Decorates any food. Good for celebrating the new year 2026!!! Good printing! I used PLA/PETG as the material. No need to use supports!!! If you are…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE TOOTHPICK CAKETOPPER MAN AND WOMAN Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings,…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
It's an old family joke, we had a "guest toothbrush" that we offer to our overnight guests who forget to bring their own. Now I have finally realized a ‚real‘! Offer this toothbrush to your overnight visitor or friend and earn a shocked…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
This model consists of 5 parts. Recommended material is PETG.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my bigger variant for oversized 16mm thick toothbrushes toothbrush stand (zahnbürsten ständer) in octagonal style. The stand is open on the bottom to let the brushes dry and make it easier to clean the stand plate. The stand has a…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Description This 3D-printed toothbrush holder is designed specifically for Braun Oral-B Pro 2 electric toothbrushes. It allows for easy wall mounting, saving space and keeping your toothbrush conveniently accessible. The holder features a…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
There are several models, but as it did not suit me, I created mine. I did it with a slope so that the water was evacuated. The model must be printed in PETG to resist moisture.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Honestly not the prettiest but works. it's really light you don't even feel it in a pocket great for use with IEM's or other wired sound devices. It should last a ridiculous amount of time on battery. Screwless it snaps togheter BOM:…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Een kleine tandenstoker koker om gewoon om in de vrouw haar handtas te steken. A small toothpick tube that can simply be put in a woman's handbag. Un petit tube à cure-dents qui se glisse facilement dans un sac à main. Un pequeño tubo…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Printed with a brim so some clean up of the brim is required for the snap clip to work. Use a 1.75mm filament as the pin for the hinge. Enjoy! No guarantee as to its life. :-) Also uploaded to Thingiverse.…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
This is a remix of my remix of @Charleszard Sonicare Wall Mount Charger . This version has a larger opening to allow variance for plugs with a larger back, as a special request from Eug @euggersh .
Wydruk około 4,75 €–5,81 € nettoWstępna wycena jednego wariantu
Goes on toothpaste tube togrt all of the toothpaste up to the top. Inside dimensions: 60mm X 1mm X 10mm
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is designed to print without supports up to a maximum layer height of 0.2mm. I printed on PETG with a 0.4mm nozzle. Note that the model has a notch marker to indicate the front side. This is important when connecting the adapter with…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of a Oral-B toothbrush holder with a groove to get rid of excess water. While the original model is very simple, I have found out that the holes in the bottom of each toothbrush head holder do no drain water because there…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
Wydruk około 3,95 €–4,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The casing of my Bluetooth speaker started to stick, and I couldn't remove it using conventional methods. So I constructed a new casing. I printed the speaker grille as an infill without a base or top layer. So everyone can use whatever…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
Made myself toothbrush holder with dividers and removable drip tray. The drip tray does not snap on.
Wydruk około 3,20 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Container for toothpicks, sewing needles, or other random things.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Template for drawing teeth in carpentry work, suitable for any material such as PLA or PTEG, etc. Šablona pro truhláře na rýsování ozubů, vhodné PLA i PTEG. infill 10%, speed 0.3mm. Author P. Procházka
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
Holder for 4 electric toothbrushs Oral-B and 2 toothpastes. Support pour 4 brosses à dents électriques de marque Oral-B et 2 dentifrices
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
Imprimir en PETG
Wydruk około 3,55 €–4,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for 2 electric toothbrushs Oral-B and a toothpaste Support pour 2 brosses à dents électriques de marque Oral-B et une case pour un dentifrice.
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
Krytka na kartáček ,aby hrotem něco nepoškodil při uložení např. v batohu.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Toothpick gun thing: Why? : This is another one of those projects I've been meaning to complete for some time, similarly to my other print-in-place rubber band gun . This one features a straightforward design, it has a special compliant…
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
Get every last drop of toothpaste out of the tube! The toothpaste squeezer grabs the toothpaste tube between the rollers. Turning the wheel will drive the gears and squeeze the toothpaste tube. Assembles without tools with a snap fit to…
Hello, today I prepared for you remix of nice 3D model of Toothless. The original model has marking and different color of the left part of the tail. This was an imitation of the injury from the first film. I removed this mark so I could…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
WARNING: IGNORE THE FILE ERRORS. DO NOT UNDER ANY CIRCUMSTANCE TRY AND REPAIR THE MODEL. IT WILL NOT WORK. THIS FILE IS PRINTABLE AND YOU CAN IGNORE ALL OF THE ERRORS. UPDATE: JAN 24 - floating element removed. Model shouldn't need to be…
lil dragon, new better quality version.
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
