5535 modeli
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
*NEW: The original .blend file added for easy edit of the model Original design from Cas van de Pol . I made a model of the dancing toothless meme of tiktok No specific printer specifications Better resin 3D printing for the smooth surfaces
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Sometimes you have enough toothpaste in the big tube, but not enough in the small tube. Solved. Sometimes you have a few small tubes that are almost empty. Consolidated. Sometimes you just want to connect two tubes together and squish…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Oral-B Toothbrush Holder This one is a more simple version from the once you can find. I did not wanted to have a big piece where you could store more than just the toothbrushes. Therefore, I designed a slim-version. Enjoy.
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So this is a remix of https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit made by https://www.printables.com/social/242064-ruben-martins/about I love things that fit in Altoids Tins. I made it so it fits in an…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toothbrush holder in the shape of tooth. You can decorate your baath room and put your toothbrushes in.
Wydruk około 5,72 €–6,99 € nettoWstępna wycena jednego wariantu
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Great toothbrush holder for kids and grown-ups alike. Or perhaps a great gift for your dentist friends for their office. For this remix, I've added 4 angled holes large enough to fit good sized brushes and a drain system. Also added…
Wydruk około 11,30 €–13,81 € nettoWstępna wycena jednego wariantu
Optimized my original design https://www.printables.com/cs/model/310477-toothpaste-roller so that both models can print without supports.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This screw together case keeps your toothbrush clean and safe while traveling. It needs to be printed in spiral vase mode. Since it is in vase mode, you need to print each part separately. I used a 0.6 mm nozzle with 1 mm external…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Designed for two toothbrushes (Phillips Sonicare). To be attached with double sided montage tape. Very simple design, my first attempt to design something in Fusion360. Print instructions No supports needed.
Wydruk około 6,38 €–7,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick demo showcasing the holder: Details: This case is made to fit a chonky “Colgate 360 Sonic Power” electric/vibrating toothbrush - so it should fit most other “normal” type manual toothbrushes as well. After my old toothbrush broke…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Toothbrush holder multicolor
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Kleiner Wackelzahn. Beispiele wurden aus PLA gedruckt. Viel Spaß damit, ünber ein Like würde ich mich freuen.
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…
Wydruk około 2,97 €–3,64 € nettoWstępna wycena jednego wariantu
Starting from the Rugged Box (Parametric) model, I changed the dimensions to accomodate for my Oral-B toothbrush and then created the insert to be able to place the toothbrush with our two brush heads. I traveled by plan with it in my…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toothbrush holder for five toothbrushes. Hole diameter: 17 mm Print without supports
Wydruk około 6,65 €–8,13 € nettoWstępna wycena jednego wariantu
Oral-B stand for two brushes with spacing between the baseplate and the brush to allow for water flow.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This model is a quick adaptation of the original model to fit two instead of four brush heads to fit my needs. The model printed well without supports on my Prusa Mini with PLA filament.
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Traveling case with aeration holes and a sliding lid for Oral-B electric toothbrush with 2 heads
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a silly remix of the popular Julius Caesar Bust . I've included the versions with and without supports. Update: 2/27/22 - Added 12mm and 22mm versions to accommodate smaller and larger toothbrushes Update: 3/1/22 - By popular demand…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toothbrush holder for oral-b and toothpaste
Wydruk około 3,43 €–4,20 € nettoWstępna wycena jednego wariantu
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
A gridfinity charger for your Sonicare Toothbrush.
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Forgot to buy one, but needed it urgently, so I made this quick printable one nozzle ≥ 0.6 and vase mode shorten the time even further
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Print instructions: Print both parts Supports are needed for the lever Print in your preferred orientation ≥0.30mm layer height ≥0.60mm nozzle Scale to the size of your toothpaste Put them together as shown in the photos Enjoy! Thank you…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Paper drinking straw C60 connector can be found here: https://www.printables.com/model/204151-paper-drinking-straw-dodecahedronc20truncated-icos @ jmckeand did provide many toothpick connectors here ……
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
A shelf for storing toothbrushes. Dimensions of the shelf (LxWxH) 220mm x 60mm x 100mm Height for doble-sided tape 25mm Material PETG or Any Support Yes, organic (recommended) Mounting: Add pieces of 20mm double-sided tape ( 3M tape…
Wydruk około 10,71 €–13,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Leatherman ARC mod that adds the capability to carry original Victorinox toothpick (or tweezers) and pin. You can use the original torx screws that came with your ARC to secure the mod. The pin and toothpick can be bought separately on…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
My kids are always struggling to get the toothpaste cap off (usually because they are messy and have a ton of dried toothpaste on it!) So, I decided to make a toothpaste cap that is easier to get on and off. They've only been using it for…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
A compact, custom-designed toothpaste tube squeezer in a bunny shape, made especially for Easter. It helps squeeze toothpaste and similar tubes more evenly and makes it easier to use every last bit. Practical, decorative, and a fun 3D…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An elegant toothbrush stand for 3 toothbrushes of model Oral B. The hole where the toothbrush is placed is 28mm in diameter so the toothbrush can't be larger than that. This is just a stand and has nothing to do with charging the…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toothpaste holder optimized for Elmex and other 35 mm toothpastes. Adhered with double-sided adhesive tape
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A toothpaste squeezer that works great. I designed it to work with Colgate but it will work with others. Buy me a coffee! https://www.buymeacoffee.com/MK4EXPERT
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
A stand for the Dontodent electric toothbrush from DM . Recommended settings: Perimeters: 4 Changelog: v8 Decreased the risk of breaking of the stem v6 Initial version
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I tried some 3D printed squeezers previously but wanted a slim and small version so that the toothpaste tube can be kept tidily in the usual cup in which we place our toothbrushes and toothpaste so no additional counter space is used up.…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This is a remix from the toothpick case / holder by @WanderWardr. Since my toothpicks were only 58mm and I wanted a smaller version for travel I made some changes to the design and removed the screw-on top. Things changed between this and…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
L'idea è nata per dare una funzione alternativa al bellissimo vaso Savoy di Alvar Aalto, che risulta essere un po' scomodo per fiori di mezza lunghezza, ma che, grazie a questo inserto riesce a offrire spazio per gli spazzolini elettrici…
Wydruk około 13,45 €–16,44 € nettoWstępna wycena jednego wariantu
Best printed with higher layer height for speed but anything works. I printed with 0.6mm nozzle at 0.3mm layer height in PLA on a water-patterned PER printbed and painted-on organic supports. Supports are required and pre-added in the…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
This is for hanging a Logitech Bluetooth Rx on the wall using a large T-pin.
Wydruk około 1,39 €–1,69 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you T oothpicks, canapés, party . Suitable for skewering canapés. Decorates any food. Good for celebrating the new year 2026!!! Good printing! I used PLA/PETG as the material. No need to use supports!!! If you are…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
There are several models, but as it did not suit me, I created mine. I did it with a slope so that the water was evacuated. The model must be printed in PETG to resist moisture.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with a brim so some clean up of the brim is required for the snap clip to work. Use a 1.75mm filament as the pin for the hinge. Enjoy! No guarantee as to its life. :-) Also uploaded to Thingiverse.…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
This is a remix of my remix of @Charleszard Sonicare Wall Mount Charger . This version has a larger opening to allow variance for plugs with a larger back, as a special request from Eug @euggersh .
Wydruk około 4,75 €–5,81 € nettoWstępna wycena jednego wariantu
Goes on toothpaste tube togrt all of the toothpaste up to the top. Inside dimensions: 60mm X 1mm X 10mm
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
The Tooth of Time helps in the Fight against Caries To rid the teeth of sugar and other plaque, they should be brushed for 3 minutes after meals. With this design, you can use sugar to help you measure the time to brush your teeth. For…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I am in favor of nothing in the sink. It's a bit of a duel at home, but sticking to the wall solves a lot of problems. We have been using it at home since March 2018 and without any problems. So it's our anniversary right now. I have a…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Since phones have no longer mini jacks it is hard to get music from the phone into a mixer channel. This bluetooth module has a mini jack that fits into any audio system, but it’s designed for MackPro mixers that have a mini jack input on…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
The casing of my Bluetooth speaker started to stick, and I couldn't remove it using conventional methods. So I constructed a new casing. I printed the speaker grille as an infill without a base or top layer. So everyone can use whatever…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
Made myself toothbrush holder with dividers and removable drip tray. The drip tray does not snap on.
Wydruk około 3,20 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The lid is a very snug fit. I use it for a VESC motor controller and only need 4 pins. Version B has all pins accessible.
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
This is designed for braces or filling the cup with water while brushing your teeth. No supports needed. Printed with 0.2 height and PLA. Use at least 3 Perimeters (watertightness).
Wydruk około 6,37 €–7,78 € nettoWstępna wycena jednego wariantu
This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile , recreated from the original part using caliper measurements and reference photos. Specifications 10 rounded (cycloidal) lobes Outside…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Simple support for the generic T19 Bluetooth speaker. Made to be used on the wall with double side tape.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Toothpick gun thing: Why? : This is another one of those projects I've been meaning to complete for some time, similarly to my other print-in-place rubber band gun . This one features a straightforward design, it has a special compliant…
A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
Get every last drop of toothpaste out of the tube! The toothpaste squeezer grabs the toothpaste tube between the rollers. Turning the wheel will drive the gears and squeeze the toothpaste tube. Assembles without tools with a snap fit to…
Hello, today I prepared for you remix of nice 3D model of Toothless. The original model has marking and different color of the left part of the tail. This was an imitation of the injury from the first film. I removed this mark so I could…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
WARNING: IGNORE THE FILE ERRORS. DO NOT UNDER ANY CIRCUMSTANCE TRY AND REPAIR THE MODEL. IT WILL NOT WORK. THIS FILE IS PRINTABLE AND YOU CAN IGNORE ALL OF THE ERRORS. UPDATE: JAN 24 - floating element removed. Model shouldn't need to be…
lil dragon, new better quality version.
Reduced size, edited for better fit in. Remixed from: https://www.thingiverse.com/thing:4569222
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Light Fury: https://www.printables.com/model/975623-flexi-baby-light-fury Flexi Toothless inspired by How to Train Your Dragon! Both the keychain and regular versions are preloaded into the 3mf project file, just hide the one you don't…
Holder for 2 toothbrushes and toothpaste, includes a removable drip tray and feet.
Ever wanted to have a toothpick gun fit in your pocket? Well now you can! With it's shortened handle, lightweight design and faster print time, this toothpick gun will leave you satisfied!
Edit 06-07-2021: Model with drainholes is now available ;) A toothbrush holder to bring cuteness and magic in your bathroom Print instructions This little tooth is ready to print. Layer 0,2mm Infill 5% to 10% No support needed Brim is…
A timeless ribbed holder for toothbrushes and toothpaste. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files…
🔥 BlazeTooth : The Fiery Fusion of Toothless and Flames! 🔥 BlazeTooth is a unique 3D model that combines the spirit of Toothless with blazing flames. With fiery wings and a flexible body, this dragon is ready to join your collection.…
Design can only be manufactured with 3D printing and will definitely catch anyones attention! Print tip: print in PLA with low print temperature and sufficient cooling to print the voronoi cell overhangs. CREATE CUSTOM 3D PRINT MODELS ON…
Overview Toothpaste squeezer to help get that last bit of toothpaste out of the tube. I've personally printed a couple for around the house. I've even had one get warped after going through the clothes dryer but it still gets the job…
Simple remix of @spidersky1489 toothpaste squeezer to open up the hole a bit to allow it to hang and added another slot to thread the tube back to keep it from slipping out while hanging. Added bonus of the double slot is it keeps the…
Toothless grinder with storage Now updated with inside corner chamfer PLEASE USE A FOOD SAFE MATERIAL FOR PRINTING
This is an OralB electric toothbrush head protector/case for when travelling, it can stop dirt and other items from touching the head of your toothbrush. Includes air vents to prevent moisture build up inside the case. How to use - place…
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
A small improvement/remix of @PsychProd gorgeous model of Smiling Toothbrush Holder . It fixes some strange artefacts and empty internal pocket in the model. It also widen model to fit kids electric toothbrush “ Bob a Bobek ” and…
* 0.6mm thick (0.4mm at eyes) * Approx. 175mm into the book * Approx. 50mm wide.
A great ribbed set consisting of two toothbrush cups and a matching base in which both can be placed. Creates some order in the bathroom. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
This is a version of the vomiting Baby Yoda which fits the Elmex toothpaste. For other brands, go to the original design . The thread has a larger-than-normal diameter and two starts. This one made me a fan of multiple start threads.…
Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…
A toothbrush holder shaped like a tooth remixed to keep the toothbrushes upright . It has a modified cavity that has a flat bottom instead of a paraboloid bottom and has 4 walled off compartments. There are two versions available to…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any. No Supports! Just a few grams! _______________________________ I added an f3d file for anyone out there who…
These connectors allow you to refill travel/trial-size toothpaste tubes, which are much smaller and prefect for travel and camping, from larger home-size tubes. The connectors are sized for the two most popular US brands of toothpaste:…
.2 or .12, suports please Support on patreon.com/objoycreation See more about OBJOY in : objoycreation.com Follow @objoycreation on twitter and instagram Model from LeFormat.
Travel back to the siege warfare era with the Toothpick Pocket Ballista. This miniature mechanical marvel takes inspiration from the powerful weapon of ancient times, perfectly sized to fit in your pocket. Ideal for history enthusiasts,…
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
