1865 modeli
Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…
Wydruk około 8,93 €–10,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
A simple hook to hang your motorcycle helmet on with a hook that fits a plastic coat hanger for a jacket.
Wydruk około 4,02 €–4,91 € nettoWstępna wycena jednego wariantu
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Support me & Join Printables Club The lamp consists of several parts. The printed parts are Flame, Stick, Holder, and Nut. Flame and Stick consist of several parts that need to be glued together. For the pixelization effect, it is…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Medieval Torch and Holder : Wall Mount Decorate your Haunted House or set the mood for your campaign with these torch holders. Fixed and Sized Up a bit. (8/22/2024)
Wydruk około 7,67 €–9,37 € nettoWstępna wycena jednego wariantu
drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing
Wydruk około 9,15 €–11,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, "classic" speedway motorcycle wall decoration. The gcodes are for 0.6mm nozzle. Stl/3mf may be added later.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Light box with Indian Motorcycle Logo. Print instructions 2 Files. one is the case and the other is the face. Face: Size is designed to be 162x162x3 I sliced it to do white for the first MM and black for the last 2 mm. GCode is already…
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
Porte clé moto, prêt pour la saison… Bonne impression et surtout bonne route, soyez prudent! ✅ 5 Johann ZARCO ✅ 20 Fabio QUARTARARO ✅ 46 Valentino ROSSI ✅ 63 Francesco BAGNAIA ✅ 93 Marc MARQUEZ Si vous aimeriez un autre pilote dites-le…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Wydruk około 7,56 €–9,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Motorcycle puzzle was originally a woodworking project of my brother in law (as shown in the picture with the red details). I took the original and made a drawing as an SVG file. With Fusion 360 I created a 3D model. The black parts…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ID card holder to mount a CAC or ID badge on the handlebar of a motorcycle or bike. Models for 1 inch and 7/8 inch bars. The holder has a cutout to avoid covering the information on both sides of military CACs. Great for getting through…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I also added a version with a support ring base, which will give you a lot more stability.
Wydruk około 3,81 €–4,66 € nettoWstępna wycena jednego wariantu
So this is the first prototype of my fully 3D printed motorcycle chain cleaner. Brushes and straps are printed in flexible materil (i use basic TPU) for the body i used Prusament PETG. I will upload new iterations as i develop them.
Wydruk około 4,43 €–5,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A handy little clip/holder that is small enough to leave on a compact EDC flashlight, but is there for when you need hands-free light. The design is fully parametric so you can customise to fit your combination of spectacle frame and…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, wall mount, torch style lamp for GU-10 LED bulbs. The torch is tilted by 30° to mainly illuminate the ceiling, giving the room a nice ambient light. The glass scatters some of the light and creates an eye catching spot on the…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Got the medallion by pwmodder 2017 on thingiverse, files here: https://www.thingiverse.com/thing:3740645 the cover was made for HD Twin Cam engines, test rode it one afternoon, did not melt down
Wydruk około 1,16 €–1,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are motorcycle mirror extensions with presets to extend mirrors outwards by 1-5/8" and upwards (raised) by 1-3/8". There are two presets: one for use with M10 threaded inserts and the other for direct use with M10 bolts. The model…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Common parts minecraft_torch_lamp_body minecraft_torch_lamp_diffuser e27_collet Wall mount parts minecraft_torch_lamp_wall_base minecraft_torch_lamp_wall_hook Desk / Table base parts minecraft_torch_lamp_desk_base Printing tips I suggest…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print instructions Print Settings ============== Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution : 0.3 Infill: 99% Filament : Devil Design PET Notes: You can use other material if you want Standard for 0.4…
Wydruk około 4,26 €–5,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
WoW-Fackel / Torch Modell einer Fackel im Stil von World of Warcraft Gedruckt auf Prusa MK4 und Bambu P1S Mit PLA und PLA Translucent Support: ja, organisch, auf Druckbett Scaling: ja Wände: 4 Infill: 5–15 % je nach gewünschter Stabilität…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This is a spacer for the cross bar behind the windshield of a Yamaha Tenere 700 motorcycle. It steps down from the smallest diameter that comes with the Peak Design motorcycle phone mount to the cross bar diameter. I know it's a simple…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
A fork mounted bracket for holding the CDI mode switch after the headlight bracket is removed on TRS trials motorcycles. A nylon tie is required to attach the bracket to the fork leg. The bracket is sized to fit 39mm forks. The switch…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
The original knob cracked and would spin on the shaft. -Original Knob The replacement knob uses a M4 x 10mm bolt and nut to secure the knob to the flat part of the shaft. Also made larger grips on the side of the knob.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Needed a "flying" motorcycle for a gift. Remix of original keychain model (https://www.thingiverse.com/thing:3269672) split and duplicated in TinkerCAD for some extra detail then modified the wheels for some "bling". ZOOM!
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…
Wydruk około 1,22 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motorcycle Grip
Wydruk około 2,10 €–2,56 € nettoWstępna wycena jednego wariantu
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
The original model is great, but I have B22 sockets so I had to adapt it. A few other changes : Cover may be fastened to the base plate with M2.5 and hex nuts Cover has an internal groove to fix the glass, so it may be used “pointing…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Molle for all Enduro and travel enthusiasts motorcycle rider. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material none Comments printed on MK4S with MMU3…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
When driving on the reace track, gloves get pretty damp and putting them back after a break is always a struggle. The goal of this contraption is to allow to have a good flow of air on your gloves, allowing them to dry before your next…
Wydruk około 3,66 €–4,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multipart belt holster I modeled for a friend. It have space for torch-taser combo(Police 80000W), DEWALT folding pocket knife (DWHT10313) and carabine utility blade knife . Belt parts are held together by 4x M3x20 screws, you also may be…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for a small torch
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motorcycle Kit Card : AI Blender script made with Gemini 4 Argon in Antigravity. Some of the spru seem unattached. well you should still be able to put it togehter. the .py script for running in blender is in the downloads. Compare This…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
This is a protective Orca Torch battery case I designed to prevent spare batteries from touching each other and causing when traveling by airplane. It fits the D530 and D530V flashlight batteries. I printed it with PETG but I'm sure other…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My son wanted to pimp his motorcycle by adding an additional set of lights. On top of that each light would be pimped as well by adding a LED Halo. This model combines the following functions: A holder for the LED Halo (no glue required…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
I'm a huge fan of the Gridfinity organization system, and I also have a butane blow torch that I use for burning and melting the strings off of my prints, and there wasn't a convenient holder already available for it and it's flared…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
This is a wall mounted flashlight hanger designed specifically for the Orca Torch D530 and D530V dive flashlights. The flashlight slides into the mount perfectly when printed with PETG. It may worth with other plastics, but I have never…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motorcycle rearview cap M10 left thread and M6. Create the possibility to close the hole of the originale mirror on your bike with a screw. I suggest to glue the insert on a screw, then screw them in the hole of the mirror.
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Tough Hook mount to Motorcycle Helmet Hook (Love my Tough Hook) https://a.co/d/5RDsxH3 Here is the Helmet Hook HEAD that will mount to this. https://www.printables.com/model/1354553-motorcycle-helmet-hook-head-shaped-kind-of Printing…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm
General Another keyring for gearheads! Pick your motorcycle brand and engine configuration. Print the roller chain, the sprocket holder and the name plate/configuration plate in your favourite color(s). Printing I printed the model on a…
Pick your motorcycle brand and engine configuration. Then print the two key ring halves and dowels of your choise in your favourite color(s). Glue the dowels in one halve, and glue the two halves together. Ride safely! Related Model…
One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…
Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…
The Fieseler Fi 156 Storch (Stork) was an unarmed liason aircraft produced in Germany before and during World War II, noted for its superb STOL capabilities. It would later be produced and flown by the French until 1970. I tried my best…
Design from https://www.thingiverse.com/thing:2504368 I have added supports - download slicer project in files. Printed in PLA - 0,2mm with 10% infill. It is very sturdy.
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
No Supports > 35% Best in TPU (more confortable)
2024-06-10: fixed scaling issue Assembly: 3x Pin 6x Cage pillar 2x Cage circle 2x Arm sock 1x Everything else Tube shaped USB battery less than 27mm in diameter. LED flame lightbulb. 5v to whatever LED bulb requires buck converter. Mini…
I wanted to do more to show the potential of the Mini 13 frame and how you can use it to make more than just awesome 3.5" action figures so I made a motorcycle for Lucky/Mini 13 that is built on the Mini 13 frame. On top of downloading…
Hang your helmet on the wall for easy storage. Securely holds in either direction. Print in any material with 3 perimeters and 15% infill with supports.
Kaneda’s bike - Akira motorcycle. Akira is a 1988 Japanese animated post-apocalyptic cyberpunk action film directed by Katsuhiro Otomo, produced by Ryōhei Suzuki and Shunzō Katō, and written by Otomo and Izo Hashimoto, based on Otomo's…
I liked the idea of a hubless motorcycle, so this is what I came up with... of course there are no handlebars to steer... erm that would ruin the look :-) The wheels do spin though and it is print-in-place, so no supports required :-)…
This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…
I have printed this holder with PETG and it's been working great for months now. Every file is to be printed once, with the exception of the spacers , which you will need 4. Apart from the printed files, you will also need: For the cup…
I added teeth because original design was slipping on my handles. Category: 3D Printing
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Bolt 3 times M2 x 20mm, 2 times M2 x10mm Rems do not use support!!!! only rems: Speed 60mm/s
BMW R60/2 1964 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
There are plenty of helmet mounts out there, but I didn't love any of them so I went ahead and made my own. Easily prints on its side with no supports necessary. I made mine out of PLA-CF with 4 layer wall width and 20% infill, and its…
This remixed hanger for motorcycle helmet includes a large hook that can fit an MC jacket and pants.
This motorcycle helmet GoPro mount was designed for the Scorpion EXO-T510 Full Face Helmet. The part can be heated with a heat gun to match the profile of the helmet more closely. If this helped you out, tips are welcome on PayPal or…
A henchman with bow and torch. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
Dummy 13 Motorcycle Helmet You gotta be safe when you're out riding in the wilderness. Get your helmet here and protect that precious, plastic head! :P (Pictured below with the Dummy 13 Dirt Bike and the Light Kit I designed for it!)…
Hardware required: socket head screw: M5, length: 15-35mm
The ears consist of two parts. The inner and the outer ear. The inner ear can be printed separately in a different color and glued into the outer ear. The ears can either be glued directly onto the helmet or the version with helmet holder…
Ducati motorcycle - wall art, easy to print
handguards for your motorcycle frinted from petg
Since all the phone holders I found online were either expensive or just bad, I decided to make my own. Note: This was designed for metric standard elements and 23mm handlebar diameter. Contact me if you want me to redesign it for…
This model is compatible with the lego system.
I have made a new design based on the Thingiverse model: https://www.thingiverse.com/thing:1647126 I have made the design with the same appearance and measurements, but adapted only to one hole at the top. I have printed it with PETG at 3…
Detachable devil horns for motorcycle helmets. Can be detached from a base on the helmet. Mounted using a twist lock / screw mechanism. I recommend printing it in PETG and printing screw_in_mount and screw_insert slower for better print…
This is a lantern-type flashlight for Milwaukee M12 battery. It is my first design made with Fusion 360, so the quality of it may be questionable, but if you want to use it, go ahead. BOM To assembly it, you will need: 3d printed base - a…
I needed somewhere to store my motorcycle helmet, and thought this simple wall hanger might do the trick. I printed this in PA-CF with the Bambu Lab X1 Carbon. Layer Height 0.2mm Filament - PA-CF Orientation - Print on Side (better…
This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…
Simply hanger for moto hemlet.
Angled Motorcycle Chain Oiler. You can use zip ties or tape to fix it on the spray tube.
My own version of a Minecraft torch I created for a friend. This one comes with a wall mount and a mount for LED stripes. I did split the back part to be able to print it more easily. I made the model parametric (to an extend) as I did…
BMW R32 year 1925 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s All axles are equipped with m3. Likewise the fork pin is m3.
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
This is custom GoPro mount for my friend's special order. The idea was to mount GoPro base in front center. It works fine and get a best possible camera angle. I will post better pictures of real print soon ;) Skechup file included - feel…
Scarfring or neckerchief based in a Cute Beaver. Pasa pañuelo de adorable castor para scouts, lobatos y castorcitos
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
