314 modeli
printed in PLA, probably could be printed in TPU as well. Try printing without support.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
I wanted to fly these cool UMX planes and micro helicopters with my Jeti DS Transmitter. So I built a box to fit the Organge Module from HK (OrangeRX DSMX/DSM2/Devo 2.4Ghz Switchable Transmitter Module V2.0 JR/Turnigy/Taranis/Walkera…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/ NOTE: YOU WILL NEED TO REMOVE THE MIC FROM THE BOARD FOR THIS TO FIT Resolution: <= .28 Infill: >=20% Filament material: PLA Print with brim…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Transmitter console The transmitter console consists of several 3D printed parts that are glued together with epoxy resin. It is made to be used with a variety of handheld transmitters. With an optional extension, the console can be…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a pistol-style RC transmitter based on Arduino . It was created as a simple and budget-friendly alternative to commercial transmitters. It covers the basics and works well for controlling cars, boats, or other models where you…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
See https://www.playingwithfusion.com/ for more information, or see assembly instructions on Instructables here .
Remix of the transmitter box from Shaladdin's awesome Wireless powered BentoBox (remixed from thrutheframe's BentoBox Air Purifier for X1C). My version of the X1 Carbon (received April '23) has an extended edge which prevents installation…
Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…
I created a Gamepad RC Controller. The entire build is made of PLA. It is powered by single Li-ion 18650 battery. There are just three types of screws holding it together, which simplifies assembly and maintenance. This controller is not…
Introducing the q-tip stick end for an FPV transmitter. The hole is self threading on an M3 bolt. I can create other sizes if anyone asks. I liked this particular stick end since I'm a bit of a hybrid user. Notes: Don't over tighten, it…
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
Housing for an FPV camera incl. transmitter and battery. If you don't have a drone handy, the unit is straightforward to get a camera image from the air. The duration of use can be longer with an e-sailplane model than with a drone. So…
Rack(s) for holding the Xvive U4 In Ear System Transmitters (with cable routing channels for all models). I used some scotch tape to keep the cables in their channels, then mounted with command strips. I’ve included ready to go STL’s for…
For some insane reason, I decided to dive into the world of DIY drones by building my own transmitter and some would say the results were catastrophic. In the end, I learned a lot in the process and did successfully build a drone…
RC car transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for all rc car transmitters, it may fit other transmitters, but not guaranteed. I made another model, for…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
Transmitter Tray FLYSKY i6 or TURNIGY i6 by GeorgeXib on Thingiverse: https://www.thingiverse.com/thing:2655235
The DoorHan Transmitter 2 Pro key fob I use for my garage door has buttons that are easy to press by mistake, as they have low resistance and are in line with the top surface. I designed snap-on cover to hide the buttons a bit, so they…
Arduino NRF24L01-Based 10-Channel RC Transmitter – 3D Printed Case 🔧 Project Overview: A custom 10-channel RC transmitter designed using the Arduino Nano and nRF24L01 wireless module. It includes support for dual joysticks,…
Just a wall hanger to keep things organized. Print in PLA without supports.
Mount to attach DJI Mic receiver and transmitter to a Canon EOS R. Instead of using my big Videomic Pro+. This way, you can also use the DJI Mic while using a gimbal (in my case a Zhiyun Weebill Lab). V2 has a slightly smaller hotshoe…
Wall mount for Spektrum SLT2 RC car transmitters, that come with lots of Arrma RC cars, e.g. Gorgon, Granite Mega, Fury, Vorteks, Grom series, ... Might also work with similar transmitters from other brands, but not tested. For mounting…
TQI Transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for Traxxas TQI transmitter, it may fit other transmitters, but not guaranteed. I made another model, for…
I designed some fancy switch sleeves for my Taranis QX7. I suspect that they'll fit the X9D and most other radios. Must be printed in a flexible filament. Inspired by these silicone doo-dads: Slicone Transmitter Anti-slipping Stick Switch…
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…
My daughter (8) has quite small hands for her rc car transmitter (spektrum dx3). This makes it really hard for her to reach reverse by just stretching her finger as there is such a large gap in the trigger. This buffer removes the space…
A remix of Transmit Blocker Baofeng Factory Screws By JULEZ_GERMANY except it allows you to press the black Monitor (MONI) Button because it does not transmit, it just activates the light on press and disables squelch when held down. It…
Case for KY-008 Laser transmitter and reciever
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
This is a battery extension box for the RadioLink RC8X RC transmitter. This extension allows you to use more widely available rechargeable batteries, like the 2 cell battery packs that use the 18650 cell type batteries. Those battery…
Yet another grippy… but this one's kinda nice. ;) I printed with Siraya Blu on a Sonic Mini 4k printer, using Siraya recommended settings (4.5sec exposure, etc). The holes for standard brass threaded inserts are exact size. Inserts press…
Simple protective cover for the HSE2-868-BS Hörmann hand-held transmitter. In my case, the holder for the lower part broke off. This keeps it in place. The cover also protects against fall damage, as this is how I damaged the lower part.…
Work-In-Progress: 23.05.17 add dx5e mount file My mini transmitter 162x130x40 mm. on AR Uni board ( https://www.rcgroups.com/forums/showthread.php?2570260-ARUni-AR-Universal-board ) I use frsky XJT transmitter & DX5e DSMX module. For…
The magnet of the charing port is too weak. The mic mini transmitter can be knock off even using the original charging cable. so I have to make a case to keep them together while charing. There is a window o the left side so you can see…
howtomechatronic diy rc transmitter box based on : https://howtomechatronics.com/projects/diy-arduino-rc-transmitter/
I really dislike the foam feel of RC car radios. I decided to design a replacement for the SLT3 used with my Arrma Typhon 3S. This part will fit any SLT3 transmitter, which comes on most all of Arrma's 3S line (Typhon, Granite, Senton,…
This is a printed alternative to the item available at: https://shop.jetiusa.com/Jeti-Transmitter-Holder-DS-12-p/mar-hds12.htm I decided that the price of the original solution was too high, so I decided to design my own solution. For…
you need to connect with glue or tape
This is a little case I put together to give my iPod Classic 5th generation (iPod 5g/iPod video) a backpack to hold a 1Mii bluetooth transmitter/receiver, instead of just letting it dangle around and potentially get damaged or damage the…
Replacement battery cover for DumboRC DDF-350 Transmitter.
This is FMS R3A Transmitter holder for IKEA Skadis pegboard. This transmitter (controller) comes with FMS FCX24 cars, I had it with Chevrolet K5. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook…
Added a 120mm stand area for the transmitter of my RC Truggy.
Can be used for an RFLink setup for example with an Arduino Mega (with micro USB or USB-C connector), a 433 MHz superheterodyne transmitter, and a receiver with copper antennas. The case is a somewhat loose friction fit, to make it easy…
SCX24 Transmitter wheel thumb extender. For single-handed transmitter use. This lets you have a free hand while driving, so you can film with your phone, eat a tasty sandwich, or do anything else your other hand needs to be doing.…
I've printed and used Bryce's awesome Transmitr remote mount , but I just can't leave well enough alone. Considering the remote is held to the stock mount by screws, I was curious if it was possible to use those screws to install the…
This is a little tool used to get the nuts of transmitter switches. This specific one was made for the taller tapered nuts found on the FlySky i6 transmitters. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No…
This is a remix of emcee1111's transmitter box to support this USB-C based charging coil: https://www.amazon.com/dp/B09FLCMGV9 . The original charging coil listed for the Wireless Bento Box doesn't appear to work well with 24v fans. Based…
I made Stick End for M3 screw with M3 nut DIN 985. Enjoy it.
Remixed for Gikfun 20W Qi Wireless Charger Module and M3 screw / nut
This is a slight remix I did in order to fit a Qi USB-C Transmitter. Here is the Amazon link to the transmitter I used: https://www.amazon.com/gp/product/B0BRMMYZR2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Note: I had to make some…
Line 6 G30 Transmitter Pouch
Wall mount for Spektrum SLT3 RC car transmitters, that come with lots of Arrma RC cars, e.g. Senton, Granite 223s, Kraton, Typhoon, Big Rock, Mojave, ... Will also work with Spektrum DX3 Smart transmitter, since it's the same shell as the…
Needed more terrain for Five Parsecs, so I made this simple tower design that prints without the need for supports. Is it a transmitter? A solar panel? Up to you! Bishop is not included. He is just there for scale. :) If you haven't heard…
V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through. V1 worked, but was terrible to remove, and was mainly to confirm my measurements. V2 was nice to…
This is a tray console for Spektrum RC Transmitter DX6, DX7, DX8. Transmitter gets fully fixed and can't fall out. The transmitter console can be placed either flat or upright without the transmitter touching the ground. Parts 1 & 2 are…
Just some gimbal stick extenders for RC Transmitters that take m3 screws/threading. STL uses a m3*10 screw with 2 m3 nuts (see images). I used cheap superglue to put the two pieces together and they have yet to come apart. Only tested on…
This is roughly designed after a Hammarlund style vintage form, with some changes. I designed it to accept a common octal plug in tube base: https://www.tubesandmore.com/products/plug-8-pin-octal-tube-base-black-plastic OD is 1.625",…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
These sticks are primarily designed for the graupner MZ12 RC transmitter, although it might work with any transmitter using an M3 nut design. I printed these without a brim, but it might be a good idea to use one if you have some adhesion…
This is a mounted holder for the SHURE AD1 BODY PACK Transmitter. At the station I work at the mic cords would get damaged from being wrapped around the transmitter. So I designed this mount to let the body pack sit in and allow the mic…
Jeti TX Lite Modulgehäuse für TU2 Sendemodul Das Modulgehäuse ist passend für das Jeti TU2 Sendemodul. Damit lässt sich das TU2 Modul an Fernsteuerungen wie TBS Tango2, Taranis-X-Lite und voraussichtlich Radiomaster Zorro betreiben. Das…
Dva identické stožáry vedle sebe na společném podstavci s nápisem „LIBLICE B“.Byly odstřeleny dne 15.10.2026
This is a remix form another model. Here I only uploaded the moditications done. You should go to the original part and take the misssing files. Based on this design ( https://www.thingiverse.com/thing:1607446 ) I made a new top part to…
About: My friend is in a German punk band and asked me to help find a solution to keeping his wireless transmitter on his bass guitar strap. This is the first version I came up with. Will also upload version two on my profile which…
Split Bobbin For Large Area Coils Ever need a coil for remote power transmission over a short distance. You can buy these online to light LEDs randomly arranged inside the coil and not too far away. This is useful to brighten up your Lego…
Redesign of the handle from Flysky FS-i6 RC transmitter for use on FS-TM10 RC transmitter. The handle can also be used for TX FS-i6 or Turnigy. This model was used as a source: https://www.thingiverse.com/thing:2254514
This wall mount should hold just about any transmitter pack for lavalier style microphones (including head mounted microphone). If you use a head mount style microphone (as in picture), there is a notch at the back of the mount, to hang…
I wanted more room on my desktop so i made this holder to mount it under the table. Space to use all the ports
Sigma Speed Transmitter Sensor
You probably want to add supports under the small part that sticks out 90 degrees on the clip.
This is a single model, print 2 of them. Slides over each end of the Transmitter, small cutouts to go around the feet, and thick enough so the feet are flush with the bottom side for flat mounting. The front or back has a small lip to…
@Shaladdin_631765 's amazing https://www.printables.com/model/441292-wireless-powered-bambu-lab-bento-box-v1-v2-for-x1c wireless remix of @thrutheframe…
Transmitter box for 20w charger find in europe ecommerce based on new x1c design
Print with the left or right side down and use a skirt for better bed adhesion. No supports needed really. If you print the LOGO version you must place the model with the "R" edge facing the bed in order to print correctly.
Since my old wireless transmitter had to be replaced with a newer one i found really uncofortable to attach it directly to my bass guitar. So i designed an attacment to use a simmple jack extension to fix the transmitter to the guitar…
For Arduino Laser and LDR Data Transmission. It been used 0.8mm Fishing Line Clear Nylon. look at last images Print Settings Material: PLA Rafts: No Supports: No Nozzle: 0.4 Resolution: 0.08 because of fine Thread
✨ Welcome to the iNap Malinka main page! ✨ iNap Malinka was mostly made as a decent Raspberry Pi based NRF24L01 transmitter. But as it turns out you can play some games on it as well! It's a small DIY handheld that runs RetroPie so any…
Inspired by console gaming controllers, this knob is more comfortable while retaining grippyness.
this is a miniature case for a DigiStump Attiny85 and a common 433mhz transmitter. both wired together it make for a Micro FoxHunting Transmitter on UHF/70cm band! you only need a USB power bank to plug this in and you are ready to go.…
Holder for the FlySky FS-GT3C Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 % Category: R/C Vehicles
A simple toy transmitter coil and a mounting plate to attach it securely to a piece of fabric. My wife works with young deaf children and this allows their stuffed animals/dolls to be a little more like them. Since these are designed for…
About: My friend is in a German punk band and asked me to help find a solution to keeping his wireless transmitter on his bass guitar strap. This is the 2nd version I came up with which has a lid instead of using velcro to secure the…
I wanted a simple clean wall mount I could hook my transmitters into that can be securely fastened into drywall. This can be printed without supports. Designed for No 8 12x1 1/4 plastic wall plugs/screws, but could work for something…
This remix from @Jerod derived from Traxxas Radio Wall Mount. I have removed the thicker part and extend to roughly 30mm to accommodate mid and high end level of SANWA transmitters specifically MT44 and M17.
I've developed a remote control system. This system allows you to individually manage 8 channels . Using this, you can control your RC toys, Robotics applications, Arduino projects etc. I chose RF communication for the wireless medium to…
Holder for Futaba 4PM Plus
This is a strap case for the A8 Wireless Guitar Transmitter. The transmitter was designed to plug right into the guitar, but it's prone to breakage and being pulled out that way. The design allows you to take it on and off a strap fairly…
I recently posted my Transmitr remote mount for MTB handlebars (as that's where I use mine) but realized that I didn't have a version that would work with road handlebars in the common 31.8mm dimension. Like the MTB mount, this needs only…
Supports the wireless coil to prevent it from falling.
This is a remix of Losi Mini B/T2.0 Transmitter Wheel by 24v , which is a remix of Losi Mini B/T2.0 Transmitter Wheel by PBARSAMIAN . I made the rotational stopper thicker and connected it to the wall to prevent it from breaking as easily.
I used universal double hook for containers.
Layer: 0,2mm Filament: PETG Infill: 20%
If you’re looking for a solid battery storage solution for your Perdix 2 dive computer, Swift transmitter, and Orcatorch SD01, this case is a great option. It keeps everything organized, protected, and easily accessible between dives. 1x…
This is upload of files that I played with to control one handed my RC cars and Boats transmitters. The objects consist of rings that attach to the radio controller wheel and grip objects that attach to the ring itself. The rings differ…
Rechargeable TrackIR transmitter. Supports touching the bed for the main unit. The unit is modelled for the right side, I mirror it as I prefer it on the left left. Uses a dovetail to connect the main unit to something that you can stick…
Simple garage gate remote holder for Novoferm brand. Can be attached with double-sided tape or screwed through the hole.
This is a transmitter neck strap attach for Futaba 14SG radio. It may work with other depending on the ring on the radio. Attache pour radio Futaba 14SG Print Settings Printer: fabrikator mini 2 Rafts: No Supports: Yes Resolution: 0.1…
I have modified my GT3C transmiter and I am no longer using original power button. (Power switch wires are common problem for GT3C users). I have ordered steering wheel for transmiter from Yeah Racing. As expected not a single one could…
