Liczymy pasujące modele…
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
I love the (reusable) cable ties and print them out in different sizes all the time. This is another remix from cable ties . They are flexible, made for using TPU or PP! Now, on PrusaPrinters 3D Contest “Cable Organizers” I thought I make…
This is a 6 elix trapezoidal thread screw, it's pretty fun to play with and shows the capabilities of 3d printing. It can also be used to test out your printer calibration on thight tolerance. There are three files, they differs on the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My take on the trapped ball object. Prints without supports as long as your printer can handle 20mm bridges.
This hinge uses a joint design that's unique to additive manufacturing, you couldn't make a hinge like this any other way. It's also sized to fit nicely on a 20XX-style extrusion so the pivot point is right next to the outer edge of the…
This glasses case prints in place and uses trapped hinges. It also has spaces for 3x1mm neodymium magnets for a closure system. I recommend turning on support to make sure there is no sagging on the bottom of the hinges, but check your…
Name: Fidget Elevator: a mechanical curio curiously without compliant parts Video: https://youtu.be/ji-E1huV4Js Printing Instructions: https://koolfingers.com/3d-prints/printing-elevators/ Ask anyone playing with a Fidget Elevator for the…
An optimized handle that prevents water being trapped between the lid and handle. It needs to be attached with a brass insert nut. The hole for the M5 screw in thehandle is 11mm deep.
One of the first things I made to print on a 3D printer because it's something only a 3D printer can make. The middle nut will spin after all the supports are removed. I've uploaded the SolidWorks part files for this so you can edit as…
A classic assembly puzzle where you have to trap a ping-pong ball between these frames. Requires a standard (40 mm diameter) ping-pong ball. Note: You shouldn't resize the pieces in any way, because they may not fit properly if you do. I…
I wanted to try creating an object with multiple object trapped within one another so I made this. Category: Sculptures
This is a simple nut that's trapped on a double headed bolt. I designed this in Fusion 360 with a 0.5-0.6mm tolerance. I included a small test part and both F3D files along with the actual trapped nut STL file. Print Settings Printer:…
Discover the fascination of an impossible object with this Trapped Sphere in a Cube Fidget. This model is designed as a seamless print-in-place mechanical illusion. It rotates smoothly in all directions. Perfect as a desk toy, stress…
Just the body and the Encoder cap. I also threw in a Logo front plate. Front plate was printed with 0.2 nozzle to come out nice. Get the rest of the parts from the original. Update: I managed to damage the USB port on my t114 so I made a…
Just a bit of fun Category: Other
Here on this Thingiverse page you will find yourself a very customizable trapped sphere. Use Customizer or download the SCAD file to customize the cube size, hole sizes, and sphere size. Please comment if you have any questions or…
Maybe you won’t be the coolest… but you’ll still have a nice print at home!
This is a revision of the impossible trapped box paired with my maker cube test model. Still functions as a test model with bridging, sharp overhangs, and a small first layer contact patch. This mild torture test will push the limits of…
This is a sphere trapped in a dodecahedron. I forgot where I got the dodecahedron but it was somewhere here on Thingiverse. There is a 1mm clearance between the sphere and the cage, and the diameter of the sphere is the same as the…
I had trouble printing a Ball in a Cube. So I designed one for myself with 6 flat side. If it is printed well you shouldn't see where the ball was on the build plate. I hope you don't have much troble printing this. Maybe the cube is a…
I decided to make a dumb sign out of a meme I saw.
Easy to print polyhedron trapped in a cube - its a demonstration of the principles of 3d printing and at the same time a test of the clability of bridges. no supports needed brim recomended, but not necessary scalable
Top half is thick, bottom half is thin. looks as if the stick figure is trying to escape
Just having fun with the formula. This version is meant to have the inner spiral ball trapped inside the outer cylinder. Print the ball first and then while printing the outer cylinder pause the print and add the ball before it finishes.…
I recently purchased a Nature's Way Birds Cedar Hopper Bird Feeder. Unfortunately already 2 birds got stuck in the suet cages because their product doesn't come with a lid / top mesh to close the cages as most do. The first bird didn't…
A sphere trapped in a skeletonized cube. This is a nifty object that will baffle people as they try to figure out how it got in there!
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Supports required
A Dodecahedron die trapped inside of a cube.
Before trying to print this, know that the model is exactly what I intended. My prints so far have been tricky with some surface issues because I'm using a new-to-me PETG HF for white. That aside, I love the results! The round top of the…
Cool design to demonstrate how 3D printing works Print with supports and raft Category: Other
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG. 3MF Files Prepared for PLA (With Filament Color Swaps & magnet trapping position) Note 1 : Drop me a comment if you need another icon shape, will upload model as soon as…
Idk what this is. It's funny to print though lol.
I thought about what it would be like in the second dimension and how everything would be different, and how realisation of being observed constantly would be traumatising… which we kind of could be happening to us right now by…
William Afton Head(SpringTrapped), for cosplay? you can use it as a head inside the mask, i made it for same reason. I tried to make more realistic skull for my springtrap suit. You better slise it before printing? because its solid, just…
Just a little demo of some things you can do to create otherwise “impossible” prints. In this case, the cube and ball are printed with no support material, no glue or hardware, and no MMU. To Recreate: print and assemble part #1,…
Motor mount for the Filawinder geared motor modified to use trapped square nuts rather than heat-set inserts. Category: 3D Printer Accessories
A cute agent duck character inspired by modern computer games and tactical action games. A stylized collectible duck with a distinctive agent/operative personality, combining gaming aesthetics, tactical gear and playful rubber-duck…
Ready-made for prints. If you need more height, cut the model into parts at 9mm or 10mm, then scale the Z-axis of the lower part. JYSK products fit the model: https://jysk.fi/inspiration/tyylikas-ja-moderni-trappedal-sarja…
Printed upright, with supports for the bottom and the inside. No supports needed for the swords.
There's also a cap that can be attached with the included strap. Use a M3x5 or M3x6 Print the strap in TPU Try scaling up the part if the thread is a bit tight, it worked fine for me.
He was rude to me at wallmart. Sooooo print him if you want i guess…….
A spooky-funny pun gravestone for your Halloween yard or desk: a fictional parody name with a cracked, weathered stone look. Scale to taste. Part of the BySCM Halloween collection. AI-generated model (made with Meshy AI), cleaned and…
the teeth are diamond (girls best friend, not the playing card diamond) shaped to reduce probability of fin damage if you have a fish that is determined to figure out how to take the ride. sized for 3/4" pipe. it has an internal diameter…
This box uses straps anchored to the bottom and top for hinges and latches to prevent layer separation under heavy load. Larger boxes have a handled top option. The Field Box-Bottom Shell InnerTabbed doesn't work with the Field Box-Top…
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG. 3MF Files Prepared for PLA (With Filament Color Swaps & magnet trapping position) Note 1 : Drop me a comment if you need another icon shape, will upload model as soon as…
This box uses straps anchored to the bottom and top for hinges and latches to prevent layer separation under heavy load. Larger boxes have a handled top option. The Field Box-Bottom Shell InnerTabbed doesn't work with the Field Box-Top…
