1844 modeli
Update 15.10.2023 New Top - less support required New Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Wydruk około 10,26 €–12,54 € nettoWstępna wycena jednego wariantu
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
This is a trash bag dispenser so that you can keep your bin bags tidy. It can fit any plastic bag roll up to a diameter of 60 mm (2.36 inches) and a length of 187 mm(7.36 inches). It can be fitted either using double sided tape or screws.…
Wydruk około 5,42 €–6,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Trash can (Mülleimer, odpadkový koš) for VolksWagen / VW / Sharan / Seat Alhambra
Wydruk około 9,53 €–11,65 € nettoWstępna wycena jednego wariantu
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little box to keep next to your printer for any trash you will encounter.
Wydruk około 6,57 €–8,03 € nettoWstępna wycena jednego wariantu
Wanted a good and stable trash can in the front of my R1S. Bought the Yee Pin lower console organizer from Amazon to hold and stabilize it in place under the dash.…
Wydruk około 34,62 €–42,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Planned for outdoor Waste container bag. 80mm diameter x 150mm height with M4 clearance hole. Print it from PETG or ABS/ASA if you want to use it outside!
Wydruk około 4,82 €–5,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hook fits the center console of a Škoda Enyaq and can be used to hang, for example, a trash bag or another small pouch. To improve the fit and ensure it stays put, apply small pieces of self-adhesive felt (the kind used on furniture…
Wydruk około 0,45 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
This model fits on the handle of the can. There is no glue required and no supports are necessary during printing. Printing the part as shown with PETG will allow the part to flex and fit around the handle without breaking. Set the…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple cash register in the shape of a garbage can. I used a standard 0.20 speed profile for printing On Top i use supports For a nicer look, I screwed the side brackets and the bracket on the lid with M3x5 screws The lid is screwed…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
This is a hoop to keep a trash bag open. There are three parts: A vertical piece that slides onto the edge of the opening in the side of the console (GMC Terrain). A hoop that snaps into the vertical part and holds a plastic trash bag.…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Filament Waste Basket or Box for tools that fit to your Original Prusa Enclosure. You can choose from two types of covers. (With text or with icons). Video detail link on youtube video . Print instructions PLA, PETG, Nozzle 0.4, 0,20 mm,…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made the removable bin shorter in length to fit with the Nebula Pad being relocated.
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Box for used batteries 9V battery style Dimensions : 91x60mm, height 160mm Need 4 magnets diam.4 x 2mm Case: Layer height 0.2mm Infill 15% Model color Black then Copper Color change at 105mm Pause at 151.6mm to place the 2 magnets (4x2mm)…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
This model fits on the center of the handle and straddles the septum. There is no glue required; however, organic supports are necessary during printing. Printing the part as shown with PETG will allow the part to flex and fit around the…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This item rests on the side of the trash can to keep trash from falling on the outside of the bag.
Wydruk około 7,48 €–9,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable labels in various colors (e.g., blue, yellow, and green) for attaching with double-sided tape and marking recycling bins for different types of waste. The label dimensions are 60x30x2mm.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(pour le français, voir plus bas) Müllex Single 35 trash bin fastener. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : yes Support : no Duration : ~40m Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Handy tabletop waste container. Ideal for the workshop, laboratory, but also for the home. Print instructions: Material: PETG Layer: 0,2 mm Perimeters: 2 Infill: 15% Supports: No Brim: No This model does not require any special settings,…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ikea trash bin smaller version of ikea bin for printer poop Height about 10cm ====================================================================== Printing: No supports required
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
This model is solid and meant to be printed in “Vase Mode” or “Spiralize Outer Contour.” The model is 7in tall and 5.75in in diameter at the top. The Solidworks model is included if you would like to mess around with it. I recommend…
To empty, simply slide the bin off and leave the clamp attached. Edit 13.08.2026. Added DeskBinClamp_Long.stl for thicker desks. Thank you @Kostek_4999808 for making it!
This is a simple trashbag holder optimised for vase mode. The big one has an inner diameter of 80mm and a inner height of 180mm. The small one is 50mm by 130mm. You can tape it or drill small holes for screws. Both had a wall of 2mm and…
https://www.buymeacoffee.com/augustas Maximize your space and maintain cleanliness with our Compact Trash Bag Holder . Designed for efficiency and convenience, this holder is perfect for those who value a tidy environment. Its…
⇨ Click here for the big version for the Core One L Small bin for trash like purge lines - with positioning aid to prevent bed crashes. I used 4x1.2mm magnets, but you can use the STL with a flat bottom and add your own recesses for…
🗑 Mini Desktop Trash Bin – Vase Mode A stylish mini trash bin for your desk , perfect for a workspace, workshop, or next to your 3D printer. The minimalist design with vertical grooves looks great and is fully optimized for vase (spiral)…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Clip it on to your doors sidepocket or onto the pocket on the back of your seat! Volume of 2 liters…
Desk mount trash box Table up to : 20 mm, 30 mm, 40 mm or 50 mm (form IKEA Lack Table) 2 depths : 40 mm or 70 mm (screw_v2 is a little smaller to fit well the holder)
Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…
A trash can to house all of your material waste as you go about printing other things. Print instructions This is a no-support version of the referenced original. It requires some assembly after, but it is quite obvious how it all goes…
I recommend printing from PETG, but it works even with PLA. Set wall count to 5, then use your favorite settings. If your bin has a large edge or you want stronger clips you can edit Fusion 360 file to fit your needs. Using it, is simpler…
Removable bin, trash can, or storage for whatever you like, that clips onto the edge of your desk. Simply slides up off the bracket when it's time to be emptied. Following common feedback from people, this is the third version of this…
Designer Dovydas Cesna Needed a sturdy little trash can, relatively simple model with a nice pattern on the walls to make it stiffer. total size: 200x200x225mm Settings in PrusaSlicer with 0.4mm nozzle: Vase mode 0.7mm wall thickness…
Tired of receipts, dust, and other debris clouding your workspace? This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings. This print features a fully functioning built-in…
EN Filament garbage can for the Bambu Lab A1. 1.1mm wall thickness. Printed with 0.6mm hotend. Layer height 0.42mm DE Filament Mülleimer für den Bambu Lab A1. 1,1mm Wandstärke. Gedruck mit 0,6mm Hotend. Schicht Höhe 0,42mm
My first original 3D print model - A trash can to sit next to my printer and home my failed prints and filament stringies. Recommend printing at 150% scale.
Updated version of trash bag roll holder . Model uses less plastic, but still stiff. You can mount it anywhere in any position using double-sided scotch-tape or use screws. Available sizes: length: 12cm, 16cm, 20cm Diameter: 6cm WAF (Wife…
Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Medium Waste Bin Prints without support, perfect for your desk. Notes: All parts print without support.…
People copying my model from Thingiverse and making out it's their own design, so I've added it here on Printables…. This is the second version of this project with a "fancier" bin and also the bin part is larger than the original. Since…
Yet another trash bag roll holder. You can mount it anywhere in any position using doblesided scotch-tape as well as screws. Choose your size and let's print! Available sizes: length: 8cm, 12cm, 16cm, 20cm Diam: 4.5cm, 5.5cm, 6cm, 6.5cm…
Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.
Trash Can with separate Lid or as a Solid Model Original design for the 2024 Christmas Community Print Drive . Two versions are included: Solid Model and Bottom/Lid version with two parts. My kids insisted that I create the design that…
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm. Lid can be found here:…
This is a small not perfect to scale version of a brute trash can. You only need supports for the arms. I have now designed a lid that can be found here https://www.printables.com/model/229349-brute-trash-can-lid
This object is a bin for the Bambu Lab X1 and X1 Carbon 3D printer. It is positioned at the rear, on the left side of the printer and follows the outline of the printer. It allows you to collect the waste ejected by the printer at the…
Trash can, print silk PLA. Print base without support, lid with supports.
It's a trash can… there are some trash cans here, but they are all circular. This one should be easy to resize to your specific needs, possibly even for usage as a storage container. Walls and base are 2mm thick. Put some rubber feet on…
This page is only a summary and may not have all the latest updates. The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed the "Complete Purge System" in two versions for Bambu Lab A1 Series printers. The first…
Small trash bin to install in any door of any car. Before you start choose the correct size for your car You need to measure the space available on your car door to install the trash bin and choose the size that best suits you. Isn't the…
There are a few trash cans out there. I though i'd make my own. Printing Print the Trash Can right side up in "Vase Mode" with a Extrusion Width of .8mm with a .4mm nozzle diameter For the Lid print right side up with strips drawn with…
Based on a “dog poop bag" holder, but supersize! I recommend printing without supports (supports are part of the model) and with at least 3 perimeters. There are holes on the inside for you to mark the wall with where to put the screws…
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
I remixed the very nice design from Restore Doctor. Use a piece of Filament as hinge. You can use the lower bin part from the Original ore the on in this design they fit perfect.
Clean and modern design to gather your print waste. Print the lid components top facing down. The lid frame needs some minor supports. Designed for the height of Bambu but Prusa makers can easily cut off the top of the bin to fit the…
Use tree supports on build plate only, 3 walls + 20% infill. The Trash Bag Holder turns the edge of a kitchen cabinet or door into a convenient temporary trash bin. Simply attach it to the top edge, add a plastic bag, and the extended…
What to say about it, is a trash can for the table that looks like a garbage can. I have removed the garbage can lettering from the model Printed with PETG Without support Layer height 0.2mm …………………………………………………. Was soll man dazu sagen,…
This is just a simple desktop or bathroom trash can with a swing-top lid. It has a 150 mm diameter and is 158 mm tall, so fits a lot of places easily, but isn't too small to not be useful. Print the Lid and Lid Base upside down. No…
Mini Trashcan Keychain Little trashcan that can be used for storage, decoration, or as a keychain. Maybe handy to hang on your backpack or purse. The lid is threaded. Universal slicer settings: Material: PLA Nozzle: 0.4mm Layer Height:…
Printed at 100% scale with a 0.8 mm nozzle, printing at 50% scale with a 0.4 mm nozzle should also work just fine. Lid is obviously not designed for vase mode, just print it regularly :)
this model is designed to be printed in 4 parts and assembled without any tools.
Support my work: Meine Designs sind kostenlos. Da ich aktuell viel Zeit in ein sehr spezielles Projekt stecke, freue ich mich über jede Unterstützung. Dein Beitrag hilft mir, das Filament für diese Prototypen zu finanzieren:…
This is a small trash bin you put next to your 3D printer or on your desk. You use it to throw away filament scraps, failed prints, and whatever else you want. It’s tough, it keeps your workspace clean, and it makes your life easier. No…
Small 12x12x12cm trash bin to office. The printable logo is at this link: https://www.printables.com/cs/model/423981 I printed it from PET-G, the logo from PLA, and glued it according to the template with instant glue.
125mm x 73mm x 127mm tall (4 ⅞ in x 2 ⅞ in x 5 in tall) at the top. The model is flat on the back and tapered at the front and sides so a magnetic sheet can be glued on. Or use the slotted hole to hang it on a screw.
Do you like trash? Do you like raccoons? Do you want to feel like a trash panda when you pull out your deck? Then this is the deck box for you! Inspired by the raccoons of Bloomburrow, I designed this deck box for my wife and built her a…
Just a remix of a nice design turned into a customizable Fusion360 File. Parameter that can be customized are: inner diameter inner height wall thickness flat back width front opening with mounting hole diameter ------------------------…
Yet another poop bin – but minimal by design. No clips, no screws, no fuss. The deflector is built into the body, and the bin clips in directly under the spring-loaded purge ejector of the Anycubic Kobra X – snug fit, zero wobble. The…
Am Tisch oder im Regal zu befestigender Sammelbehälter, in dem man alles Mögliche sammeln kann, nicht nur am Schreibtisch, auch im Badezimmer einsetzbar. Filament-Reste, Müll, Fernbedienung, Büroklammern, Gummibänder, Smartphone,…
This is a small trash can I made for my study room. I designed this model to be printed without the need for using supports. A sample GCODE files sliced using Cura in 0.24 layer height is attached for easy reference, please. The STL file…
Generated a better fitting version of the “Mülleimer Anycubic Kobra” by Wingman_0257: https://www.thingiverse.com/thing:5363685 Built up from scratch without rounded front and with feet that now actually fit into the grooves of the frame…
you inspired me, I adapted the filament collector according to my needs. It is no longer so deep so you save space behind the printer but higher so that nothing falls over. The logo I have packed extra to glue so you save filament The new…
I love the pencil cup an upsized it to Fit a 355ml/12oz can. I've printed TPU and PLA at 10percent infill successfully. For those that are always being told thier drink is trash.
Minimalistic Trash Can printed with Vase Mode.
I created a trash can that uses the FITS pocket to mount on the back of the center console. There are two versions. A shorter, thicker walled one that is more flush with the top of the FITS pocket and a taller one that has thinner walls…
A small functional trash bin originally designed for a colleague’s kids competition project 😄 But it also works surprisingly well as: desk organizer mini office trash can toy accessory sandbox toy miniature city / garbage truck prop The…
Update 02.04.2024: Based on the existing feedback, the bottom was increased by 100% and the walls by 50% to make the tray more stable. In addition, the cut-out in the “bed alignment”-version has been designed to fit even more precisely.…
Assembly: ______________________________________________________________________________________________________________ ______________________________________________________________________________________________________________ “Desk…
Small old school galvanized trashcan based on those seen in 1980's 1990's movies and TV shows. I have printed this in vase mode at 0.1, 0.2, 0.3, as well as variable layer thickness, and have found that it is plenty rigid enough for my…
I designed a detachable waste bin for my P1S. The slope and the waste bin feature a magnetic, detachable design, with a protrusion on the slope for aligning with the screw head under the waste opening. Magnets required for use: 1. Two…
This is a trash can for the Model Y, sized to go under the back of the center console. It is designed to take a small plastic bag, hidden under a top with a lid. There are small spiked feet you can attach to the bottom to keep it from…
Keep the nature and your hands clean with this cute dog poop bag or garbage bag holder. The carabiner can be attached to a backpack or any other bag. Size Holder 80 x 45 mm | Size Carabiner 50 mm Can be printed with PLA or PETG. Layer…
This design is licensed for personal use only. Commercial License Available To sell physical 3D prints, join Woow Pro on Patreon: https://www.patreon.com/cw/WoowConcept3D/membership ✅ 30+ popular model Welcome Pack ✅ 3+ new models every…
A small geometric trash bin I designed for placing near my printers and near my workbench where I cleanup parts. There's a few fun features about this bin that make it unique and helpful for 3D print waste: -A brim around the top of the…
https://www.buymeacoffee.com/augustas This stylish and functional 3D printed car trash can is the perfect way to keep your car clean and organized. The sleek design features a patterned side panel and a movable lid flap for easy trash…
Needed a trashcan next to my desk and decided to print one instead of purchasing one. It comes with a lid so you can insert a grocery bag for easy removal. Detailed printing instructions are supplied via a PDF document. I reccomend 3…
Lordly Trash can from videogame Honkai Star Rail. It's swole, it just is. There is a 3mf with all the options and already placed magnet negative volumes for PrusaSlicer. We can also print it for you on Etsy!…
This simple trash bag dispenser is designed to seamlessly integrate with the openGrid system using openConnect slots for mounting. The default diameter of 54 mm is chosen to leave a small gap between adjacent dispensers when mounted side…
Been seeing videos of everybody putting rims on their garbage cans. So i made some for myself. These are my version of some Dodge wheels. This print is 3 parts so there is no need for supports or multi material system. This wheel snapps…
I designed a small trash bin which fits in a cup holder. This bin is good for small bits of paper and plastic wrapping. Works great for my kids, no more trash on the floor! The lid on this bin spins in place making it easy to add trash,…
This is a remix from SubSite's excellent design , adapting it to the aluminum extrusions on the mk3. The shape lets you tuck filament strands in and keeps them from jumping out. It does a great job keeping my printing space clean. It is a…
A simple trash bin/ trash can/ garbage bin i made for a school project, with that signature shopping center style spinning lid, perfect to put on a desk! Remember to add an 100% infill modifier in the slicer to the cylindrical part below…
General Its a fairly simple model, no supports needed. For extra hardware you will only need two M3-screws (8-16mm long). Also you need to print the Trashcan lid in a specific way for the lid to close properly. Size Height: 175mm…
